Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface Measurements and Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Simple Heat Transfer Model for Film Cooling Applications

This report describes the development of a simple engineering model for film cooling. This model is used to derive a relationship between local wall temperature variations and key cooling performance parameters like local heat transfer coefficients and film effectiveness. This relation and method new and different from previously published models. The scope of this report includes the derivation of regression model equations for a flat plate with and without film cooling. The model equation for a flat plate without film cooling can be used to estimate local heat transfer coefficients using surface temperatures measured from infrared thermography. The model equation for the flat plate with film cooling can be used to estimate film cooling effectiveness, $η_f$, and heat transfer augmentation from the film cooling jet(s).

42 ENGINEERING↗
DOE OSTI2026

Neural Network‐Based Methods for Ocean Surface Wave Measurement Using Submarine Distributed Acoustic Sensing (DAS)

Two new data-driven models for estimating ocean surface waves from distributed acoustic sensing (DAS) submarine cable strain rate are developed using supervised machine learning on a 10-day data set collected offshore of Oliktok Point, Alaska. The new models were trained on target data from seafloor pressure moorings at three sites spaced evenly along 27.1 km of cable and were benchmarked against an empirical transfer function method previously used to estimate waves from DAS. A model which uses convolutional neural networks to transform 2-km frequency-wavenumber strain spectra to seafloor pressure spectra outperforms the benchmark in wave height prediction (RMSE of 0.15 vs. 0.41 m) and period prediction (0.29 vs. 0.37 s) when evaluated on a held-out test data set. When applied to a DAS data set collected on the same cable 2 years prior, the CNN-based model maintained similar significant wave height performance (RMSE = 0.23 m) relative to available satellite altimetry data. A two-hidden-layer, fully connected neural network which transforms 1-D strain spectra to seafloor pressure spectra also outperforms the benchmark in wave height prediction (RMSE of 0.19 vs. 0.41 m), but does not generalize as well to the prior data. Regression-based machine learning is useful for estimating waves from DAS data when the pressure-strain relationship varies temporally and spatially across different wave conditions. Models can be applied to DAS data to measure waves with higher spatial resolution and longer temporal coverage than traditional methods, which often measure waves only at a single point.

Davis, Jacob R. [Univ. of Washington, Seattle, WA ↗
DOE OSTI2024

Structure Sensitive Reaction Kinetics of Chiral Molecules on Intrinsically Chiral Surfaces

Enantiospecific heterogeneous catalysis utilizes chiral surfaces to resolve enantiomers via structure sensitive surface chemistry. The catalyst design challenge is the identification of chiral surface structures that maximize enantiospecificity. Herein, we develop data driven models for the enantiospecificity of tartaric acid reactions on chiral Cu(hkl) R&S surfaces. Measurements of enantiospecific rate constants were obtained by using curved Cu(hkl) R&S surfaces that enable kinetic measurements on hundreds of chiral surface orientations. One model uses feature vectors derived from generalized coordination numbers to capture the local structure around Cu atoms exposed by the Cu(hkl) R&S surfaces. The second model introduces the use of chiral cubic harmonic functions to capture the symmetry constraints of the face-centered cubic Cu structure. The model using 58 generalized coordination numbers has a fitting error similar to that of the model using only 5 cubic harmonic functions. The two models predict maxima in the enantiospecificity on surfaces with very similar surface orientations. The models developed in this work are applicable for any enantiospecific reaction happening on any chiral material with a cubic lattice structure, opening the way to understanding the surface structure sensitivity of the enantiospecific reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Measuring and modeling soil moisture and runoff at solar farms using a disconnected impervious surface approach

Abstract Ground‐mounted photovoltaic sites are often treated as impervious surfaces in stormwater permits. This ignores the pervious soils beneath and between solar arrays and leads to an overestimation of runoff. Our objective was to improve solar farm stormwater hydrology models by explicitly considering the disconnected impervious nature of solar design and site characteristics. Experimental sites established on utility scale solar farms in Colorado, Georgia, Minnesota, New York, and Oregon had perennial vegetative plantings with mean precipitation ranging from 40.6 to 124.5 cm, and soil texture ranging from loamy sand to clay. Soil moisture measurements were collected beneath arrays, under drip edges, and in the vegetated area between arrays at each site. Hydrus‐3D models for soil moisture and stormwater hydrology were developed that accounted for precipitation falling on solar panels, drip edge redistribution of rainfall, infiltration, and runoff in the pervious areas between solar arrays and beneath panels. Drip edge runoff averaged 3‐ to 10‐times incident precipitation at the New York and Minnesota sites, respectively. Root mean square error values between measured sub‐hourly soil moisture and predicted moisture for large measured single storm events averaged 0.029 across all five sites. Predicted runoff depths were strongly affected by precipitation depth, soil texture, soil profile depth, and soil bulk density. Runoff depths across the five experimental sites averaged 13%, 25%, and 45% of the 2‐, 10‐, and 100‐year design storm depths, clearly showing that these solar farms do not behave like impervious surfaces, but rather as disconnected impervious surfaces with substantial infiltration of runoff in the vegetated areas between and beneath solar arrays.

Agriculture↗
DOE OSTI2024

On the predictability of turbulent fluxes from land: PLUMBER2 MIP experimental description and preliminary results

Accurate representation of the turbulent exchange of carbon, water, and heat between the land surface and the atmosphere is critical for modelling global energy, water, and carbon cycles in both future climate projections and weather forecasts. Evaluation of models' ability to do this is performed in a wide range of simulation environments, often without explicit consideration of the degree of observational constraint or uncertainty and typically without quantification of benchmark performance expectations. We describe a Model Intercomparison Project (MIP) that attempts to resolve these shortcomings, comparing the surface turbulent heat flux predictions of around 20 different land models provided with in situ meteorological forcing evaluated with measured surface fluxes using quality-controlled data from 170 eddy-covariance-based flux tower sites. Predictions from seven out-of-sample empirical models are used to quantify the information available to land models in their forcing data and so the potential for land model performance improvement. Sites with unusual behaviour, complicated processes, poor data quality, or uncommon flux magnitude are more difficult to predict for both mechanistic and empirical models, providing a means of fairer assessment of land model performance. When examining observational uncertainty, model performance does not appear to improve in low-turbulence periods or with energy-balance-corrected flux tower data, and indeed some results raise questions about whether the energy balance correction process itself is appropriate. In all cases the results are broadly consistent, with simple out-of-sample empirical models, including linear regression, comfortably outperforming mechanistic land models. In all but two cases, latent heat flux and net ecosystem exchange of CO 2 are better predicted by land models than sensible heat flux, despite it seeming to have fewer physical controlling processes. Land models that are implemented in Earth system models also appear to perform notably better than stand-alone ecosystem (including demographic) models, at least in terms of the fluxes examined here. The approach we outline enables isolation of the locations and conditions under which model developers can know that a land model can improve, allowing information pathways and discrete parameterisations in models to be identified and targeted for future model development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Evaluation of the Near-Surface Variables in the HRRR Weather Model Using Observations from the ARM SGP Site

Abstract The performance of version 4 of the NOAA High-Resolution Rapid Refresh (HRRR) numerical weather prediction model for near-surface variables, including wind, humidity, temperature, surface latent and sensible fluxes, and longwave and shortwave radiative fluxes, is examined over the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) region. The study evaluated the model’s bias and bias-corrected mean absolute error relative to the observations on different time scales. Forecasts of near-surface geophysical variables at five SGP sites (HRRR at 3-km scale) were found to agree well with observations, but some consistent observation–forecast differences also occurred. Sensible and latent heat fluxes are the most challenging variables to be reproduced. The diurnal cycle is the main temporal scale affecting observation–forecast differences of the near-surface variables, and almost all of the variables showed different biases throughout the diurnal cycle. Results show that the overestimation of downward shortwave and the underestimation of downward longwave radiative flux are the two major biases found in this study. The timing and magnitude of downward longwave flux, wind speed, and sensible and latent heat fluxes are also different with contributions from model representations, data assimilation limitations, and differences in scales between HRRR and SGP sites. The positive bias in downward shortwave and negative bias in longwave radiation suggests that the model is underestimating cloud fraction in the study domain. The study concludes by showing a brief comparison with version 3 of the HRRR and shows that version 4 has better performance in almost all near-surface variables. Significance Statement A correct representation of the near-surface variables is important for numerical weather prediction models. This study investigates the capability of the latest NOAA High-Resolution Rapid Refresh (HRRRv4) model in simulating the near-surface variables by comparing against the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) in situ observations. Among others, we find that the surface heat fluxes, such as sensible and latent heat fluxes, are the most difficult variables to be reproduced. This study also shows that the diurnal cycle has the dominant impact on the model’s performance, which means the majority of the outputted near-surface variables have the strong diurnal cycle in their bias errors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Statistical Evaluation of WRF-LES Trace Gas Dispersion Using Project Prairie Grass Measurements

In recent years, new measurement systems have been deployed to monitor and quantify methane emissions from the natural gas sector. Large-eddy simulation (LES) has complemented measurement campaigns by serving as a controlled environment in which to study plume dynamics and sampling strategies. However, with few comparisons with controlled-release experiments, the accuracy of LES for modeling natural gas emissions is poorly characterized. In this paper, we evaluate LES from the Weather Research and Forecasting (WRF) Model against Project Prairie Grass campaign measurements and surface layer similarity theory. Using WRF-LES, we simulate continuous emissions from 30 near-surface trace gas sources in two stability regimes: strong convection and weak convection. We examine the impact of grid resolutions ranging from 6.25 to 52 m in the horizontal dimension on model results. We evaluate performance in a statistical framework, calculating fractional bias and conducting Welch’s t tests. WRF-LES accurately simulates observed surface concentrations at 100 m and beyond under strong convection; simulated concentrations pass t tests in this region irrespective of grid resolution. However, in weakly convective conditions with strong winds, WRF-LES substantially overpredicts concentrations—the magnitude of fractional bias often exceeds 30%, and all but one t test fails. The good performance of WRF-LES under strong convection correlates with agreement with local free convection theory and a minimal amount of parameterized turbulent kinetic energy. The poor performance under weak convection corresponds to misalignment with Monin–Obukhov similarity theory and a significant amount of parameterized turbulent kinetic energy.

17 WIND ENERGY↗
DOE OSTI2021

Energy balance in the DSSAT-CSM-CROPGRO model

One potential way to improve crop growth models is for the models to predict energy balance and evapotranspiration (ET) from first principles, thus serving as a check on “engineered” ET methodology. In this paper, we present new implementations and the results of an energy balance model (EBL) developed by Jagtap and Jones (1989) and then implemented in DSSAT’s CROPGRO (CG-EBL) model by Pickering et al. (1995) as a linked energy balance-photosynthesis model that has not been field-tested until now. The energy balance code computes evapotranspiration and other energy balance components, as well as a canopy air temperature, based on three sources (sunlit leaves, shaded leaves, soil surface). Model performance was evaluated with measured biomass and energy fluxes from two sites in Nebraska, namely, the US-Ne2 irrigated maize-soybean rotation field and the US-Ne3 rainfed maize-soybean rotation field, which are part of the Ameriflux eddy covariance network (htt ps://ameriflux.lbl.gov/sites). After implementing new aerodynamic resistances and the stomatal conductance model of the Ball–Berry–Leuning, crop growth, evapotranspiration and soil temperature were simulated well by the EBL model. The EBL improved ET predictions slightly over the often-used FAO56 method [Penman–Monteith (Allen et al., 1998)] for 4 of the 5 years evaluated for both irrigated and rainfed conditions. Further, a significant improvement was achieved using EBL for the simulation of soil temperature at the various depths compared to STEMP, the original subroutine in DSSAT for simulating soil temperature. Compared to the other available DSSAT methods, the EBL explicitly simulates the impacts of crop morphology, physiology and management on the crop’s environment and energy and mass exchange, which in turn directly affect the water use and irrigation requirements, phenology, photosynthesis, growth, sterility, and yield of the crop.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Scaling High-Resolution Soil Organic Matter Composition to Improve Predictions of Potential Soil Respiration Across the Continental United States

Despite the importance of microbial soil organic matter (SOM) respiration in regulating the flux of carbon between soils and the atmosphere, soil carbon cycling models remain primarily based on climate and soil properties, leading to large uncertainty in predictions. To address this knowledge gap, we analyzed high-resolution water-extractable SOM profiles from soil cores collected across the United States by the 1,000 Soils Pilot of the Molecular Observation Network. Our innovation lies in using machine learning to distill thousands of SOM formula into tractable units; and it enables integrating data from molecular measurements into soil respiration models. In surface soils, SOM chemistry provided better estimates of potential soil respiration than soil physicochemistry, and using them combined yielded the best prediction. Overall, we identify specific subsets of organic molecules that may improve predictions of global soil respiration and create a strong basis for developing new representations in process-based models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

New experimental approach to understanding the chemical reactivity of oxide surfaces

Metal oxides have been an attractive option for a range of applications, including hydrogen sensors, microelectronics, and catalysis, due to their reactivity and tunability. The properties of metal oxides can vary greatly on their precise surface structure; however, few surface science techniques can achieve atomistic-level determinations of surface structure, and fewer yet can do so for insulator surfaces. Low energy ion beam analysis offers a potential insulator-compatible solution to characterizing the surface structure of metal oxides. As a feasibility study, we apply low energy ion beam analysis to investigate the surface structure of a magnetite single crystal, Fe 3 O 4 (100). We obtain multi-angle maps using both forward-scattering low energy ion scattering (LEIS) and backscattering impact-collision ion scattering spectroscopy (ICISS). Both sets of experimental maps have intensity patterns that reflect the symmetries of the Fe 3 O 4 (100) surface structure. However, analytical interpretation of these intensity patterns to extract details of the surface structure is significantly more complex than previous LEIS and ICISS structural studies of one-component metal crystals, which had far more symmetries to exploit. To gain further insight into the surface structure, we model our experimental measurements with ion-trajectory tracing simulations using molecular dynamics. Our simulations provide a qualitative indication that our experimental measurements agree better with a subsurface cation vacancy model than a distorted bulk model.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Final Report for DTRA Project "High-resolution Velocity and Attenuation Model for Eastern Mediterranean/Mideast Region"

The overall goal of this project is to build a high-resolution velocity and attenuation model for a region spanning from the eastern Mediterranean Sea and extending eastward into the Middle East. Phase I of this project, covered in this report, focuses on the analysis of the SHDAS array, updated dispersion and amplitude measurements, development of surface wave group velocity models, and construction of a preliminary 1-degree, velocity-only model for the study region. These will be discussed in turn.

58 GEOSCIENCES↗
DOE OSTI2021

The effect of longer-range waviness on X-ray reflectivity measurements

A model for calculating the X-ray reflectivity (XRR) of surfaces to extract both roughness and waviness features is presented. Expressions of reflectivity intensity are derived as a function of root-mean-square (RMS) roughness σ, RMS waviness σ L , and the cut-off frequency between the features ω 0 . Experiments were conducted at the Advanced Light Source at Lawrence Berkeley National Laboratory, beamline 8.3.2, on BK7 glass manufactured with a multi-step polishing process to validate the model, and were compared with atomic force microscopy (AFM), Fizeau interferometry and surface profilometry measurements. Here, the parameter results and their deviations for XRR measurements were σ = 2.9 ± 0.2 nm and σ L = 14.6 ± 0.5 nm with a wavelength cut-off of 1/(18 ± 2) µm –1 , while the results from the AFM, Fizeau and profilometry measurements were σ AFM = 3.4 ± 0.4 nm, σ L,Fizeau = 21.6 nm, σ prof = 4.0 ± 0.1 nm, and σ L,prof = 21.4 ± 0.1 nm with cut-offs for the profilometry and Fizeau measurements limited to frequencies of (1/16) µm –1 to (1/4) mm –1 .

42 ENGINEERING↗
DOE OSTI2023

Corrosion rates measured under potentiostatic conditions to represent performance of a cermet nuclear waste form

Electrochemical tests were conducted to assess the corrosion performance of a developmental multiphase cermet nuclear waste form in different conditions. Corrosion currents were monitored as the surface equilibrated in an acidic brine solution during potentiostatic tests at different imposed potentials. Electrochemical impedance spectroscopy was used to quantify differences in the electrical properties of surfaces stabilised at different potentials. The passivating oxides that will stabilise the surface under disposal conditions are formed and maintained during testing. The measured corrosion currents were two orders of magnitude lower for passivated surfaces than for polished surfaces over a wide range of redox conditions. The electrochemical results were correlated with microscopic analyses of the corroded surfaces and physical models of the surface passivation and degradation processes are proposed. The measured corrosion rates are suitable for the long-term performance modeling of cermet nuclear waste forms.

Gattu, V. K.↗
DOE OSTI2022

Modeling the role of lateral surface flow in low‐relief polygonal tundra

Abstract Ice‐wedge polygon troughs play an important role in controlling the hydrology of low‐relief polygonal tundra regions. Lateral surface flow is confined to troughs only, but it is often neglected in model projections of permafrost thermal hydrology. Recent field and modeling studies have shown that, after rain events, increases in trough water levels are significantly more than the observed precipitation, highlighting the role of lateral surface flow in the polygonal tundra. Therefore, understanding how trough lateral surface flow can influence polygonal tundra thermal hydrology is important, especially under projected changes in temperatures and rainfall in the Arctic regions. Using an integrated cryohydrology model, this study presents plot‐scale end‐of‐century projections of ice‐wedge polygon water budget components and active layer thickness with and without trough lateral surface flow under the Representative Concentration Pathway 8.5 scenario. Trough lateral surface flow is incorporated through a newly developed empirical model, evaluated against field measurements. The numerical scenario that includes trough lateral surface flow simulates discharge (outflow from a polygon) and recharge (rain‐induced inflow to a polygon trough from upslope areas), while the scenario that does not include trough lateral surface flow ignores recharge. The results show considerable reduction (about 100–150%) in evapotranspiration and discharge in rainy years in the scenarios ignoring trough lateral surface flow, but less effect on soil water storage, in comparison with the scenario with trough lateral surface flow. In addition, the results demonstrate long‐term changes (~10–15 cm increase) in active layer thickness when trough lateral surface flow is modeled. This study highlights the importance of including lateral surface flow processes to better understand the long‐term thermal and hydrological changes in low‐relief polygonal tundra regions under a changing climate.

Jan, Ahmad↗
DOE OSTI2023

A Surface Radiation Balance Dataset from Siple Dome in West Antarctica for Atmospheric and Climate Model Evaluation

Abstract A field campaign at Siple Dome in West Antarctica during the austral summer 2019/20 offers an opportunity to evaluate climate model performance, particularly cloud microphysical simulation. Over Antarctic ice sheets and ice shelves, clouds are a major regulator of the surface energy balance, and in the warm season their presence occasionally induces surface melt that can gradually weaken an ice shelf structure. This dataset from Siple Dome, obtained using transportable and solar-powered equipment, includes surface energy balance measurements, meteorology, and cloud remote sensing. To demonstrate how these data can be used to evaluate model performance, comparisons are made with meteorological reanalysis known to give generally good performance over Antarctica (ERA5). Surface albedo measurements show expected variability with observed cloud amount, and can be used to evaluate a model’s snowpack parameterization. One case study discussed involves a squall with northerly winds, during which ERA5 fails to produce cloud cover throughout one of the days. A second case study illustrates how shortwave spectroradiometer measurements that encompass the 1.6- μ m atmospheric window reveal cloud phase transitions associated with cloud life cycle. Here, continuously precipitating mixed-phase clouds become mainly liquid water clouds from local morning through the afternoon, not reproduced by ERA5. We challenge researchers to run their various regional or global models in a manner that has the large-scale meteorology follow the conditions of this field campaign, compare cloud and radiation simulations with this Siple Dome dataset, and potentially investigate why cloud microphysical simulations or other model components might produce discrepancies with these observations. significance statement Antarctica is a critical region for understanding climate change and sea level rise, as the great ice sheets and the ice shelves are subject to increasing risk as global climate warms. Climate models have difficulties over Antarctica, particularly with simulation of cloud properties that regulate snow surface melting or refreezing. Atmospheric and climate-related field work has significant challenges in the Antarctic, due to the small number of research stations that can support state-of-the-art equipment. Here we present new data from a suite of transportable and solar-powered instruments that can be deployed to remote Antarctic sites, including regions where ice shelves are most at risk, and we demonstrate how key components of climate model simulations can be evaluated against these data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Geometry Optimization for a Quadrupole Resonator at Jefferson Lab

The quadrupole resonator (QPR) is a sample characterization tool to measure the RF properties of superconducting materials using the calorime-try method at different temperatures, magnetic fields, and frequencies. Such resonators are cur-rently operating at CERN and HZB but suffer from Lorentz force detuning and modes overlap-ping, resulting in higher uncertainties in surface resistance measurement. Using the two CERN's QPR model iterations, the geometry was opti-mized via electromagnetic and mechanical simu-lations to eliminate these issues. The new QPR version was modelled for an increasing range of magnetic fields. The magnetic field is concentrat-ed at the center of the sample to reduce the un-certainty in surface resistance measurements sig-nificantly. This paper discusses the QPR geome-try optimization for the new version of QPR, which is now progressing toward fabrication.

Bira, S.↗
DOE OSTI2023

A physics-driven Σ-Y atomization model for heavy-duty engine simulations

The atomization of a liquid jet is a multi-scale and multi-physics problem of interest for many engineering applications. Particularly, it drives the fuel-oxidizer mixing and dictates the efficiency of combustion engines. High-fidelity multi-phase simulations remain challenging due to the excessive computational cost required to capture all the atomization scales. Thus, atomization models are necessary to represent sub-grid liquid structures. Here, in this work, a modified Σ-Y model in the context of Eulerian-Lagrangian Spray Atomization (ELSA) is used to transport the surface area density of the spray. The model's predictive performance is assessed under various operating conditions relevant to heavy-duty engines using the Engine Combustion Network (ECN) Spray C and Spray D research-grade injectors. The classic droplet collision formulation of the Σ-Y model alone does not replicate the response of the measured spray surface area to changes in injector, ambient pressure, and injection pressure, requiring individual tuning of the model's parameters. Instead, a transition between dense and dilute spray breakup mechanisms is proposed in terms of the average droplet spacing. The collision breakup mechanism represents the dilute spray, whereas the droplet size in the dense spray is driven by a competition between the integral scale of turbulence and the balance between the turbulent kinetic energy and the surface energy of the droplets. Such an approach minimizes the requirements for model tuning. Moreover, the role of the constants of a compressible standard k-ε RANS model is assessed in the injector's internal flow and external spray simulation framework, and an updated set is proposed. The results are validated against x-ray radiography and Ultra-Small Angle X-ray Scattering (USAXS) data and highlight the predictive capabilities of the proposed physics-driven Σ-Y model, which is compatible with engine simulation turnaround times.

42 ENGINEERING↗