Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface property”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Satellite Remote Sensing of Atmospheric and Surface Properties on Daily and Decadal Time Scales

Satellite and airborne remote sensors can provide high-quality atmospheric and surface products such as atmospheric temperature, water vapor, trace gas, and aerosol vertical profiles, cloud, and surface properties. In this presentation, I will give an overview of various advanced forward and inversion models developed to retrieve these quantities. The satellite data used in this study includes hyperspectral thermal infrared and solar remote sensors such as AIRS, CrIS, IASI, CPF, and EMIT. I will also show some results of aerosol microphysical property retrievals using lidar and polarimeters.

Xu Liu↗
NASA NTRS2015

Influence of Surface Properties and Impact Conditions on Adhesion of Insect Residues

Insect residues can cause premature transition to turbulent flow on laminar flow airfoils. Engineered surfaces that mitigate the adhesion of insect residues provide, therefore, a route to more efficient aerodynamics and reduced fuel burn rates. Areal coverage and heights of residues depend not only on surface properties, but also on impact conditions. We report high speed photography of fruit fly impacts at different angles of inclination on a rigid aluminum surface, optical microscopy and profilometry, and contact angle goniometry to support the design of engineered surfaces. For the polyurethane and epoxy coatings studied, some of which exhibited superhydrophobicity, it was determined that impact angle and surface compositions play critical roles in the efficacy of these surfaces to reduce insect residue adhesion.

Wohl, Christopher J.↗
DOE OSTI2026

Importance of Spatially Continuous Urban Surface Properties in Urban‐Resolving Earth System Modeling

Accurate representation of urban properties and processes at higher resolutions in global modeling systems is essential for advancing our ability to capture the complexities of urban systems and informing effective resilience strategies. However, the prescription of coarse global-scale urban properties in most state-of-the-art Earth system models (ESMs) is limiting their potential for capturing urban signals as they advance toward kilometer-scale simulation capabilities. To bridge this gap in inadequate urban property representation and to advance urban-resolving Earth system modeling, this work integrates the newly-developed global 1 km-resolution facet-level urban surface property data set, U-Surf, into the land component of Community Earth System Model (CESM)—Community Terrestrial System Model (CTSM). The land-only CTSM simulations are validated against satellite measurements, ground-based urban weather stations, flux tower observations, and reanalysis data. Results demonstrate that the enhanced urban properties allow improved simulations of urban meteorology and surface energy fluxes compared to the default coarse-resolution categorical urban canopy parameters. Spatial scaling analysis reveals regime-dependent information loss during resolution aggregation, as well as substantial scale-dependent variations in urban surface energy flux representation. Furthermore, these findings have critical implications for coupled Earth system modeling when including the effect of land-atmosphere interaction. This work establishes a foundation for future urban-resolving kilometer-scale ESM development, which will enable systematic intra- and inter-city comparisons that inform urban adaptation strategies across diverse global urban environments.

Cheng, Yifan [University of Illinois Urbana-Champa↗
NASA NTRS1994

Surface property variations in Venusian fluidized ejecta blanket craters

A comprehensive study of Magellan Cycles 1 and 2 radar data from Venus reveals surface roughness and dielectric variations associated with fluidized ejecta blanket (FEB) craters that help illuminate styles of flow ejecta emplacement. This study develops new procedures of digital unit mapping and polygon-filling algorithms using Magellan synthetic aperture radar (SAR), altimetry, and radiometry data. These techniques allow the extraction of radiophysical information for FEB crater materials, nearby plains, and lava flows. Backscatter curve slopes of the FEBs studied here are consistent with surface textures that are transitional between a'a and pahoehoe-like. Average surface property values of ejecta units are relatively similar for a given crater, but are discernibly different from other craters. Individual crater ejecta reflectivity and emissivity values are relatively similar to those for the surrounding plains, which may suggest a link between plains material and ejecta dielectric properties. Increasing FEB roughness downflow are interpreted to be associated with more lava-like flows, while decreasing roughness are more similar to trends typical of gravity (pyroclastic-like or debris-like) flows. Most commonly, FEB crater flow materials exhibit transitions from proximal, lava/melt-like flow styles to distal, gravity flow-like styles. Some FEBs show more complicated behavior, however, or appear to be more dominated by dielectric differences downflow, as inferred from correlations between the data sets. Such transitions may result from changes in local topography or from overlapping of flow lobes during FEB emplacement.

Johnson, Jeffrey R.↗
NASA NTRS2022

Simultaneous Characterization of Wildfire Smoke and Surface Properties With Imaging Spectroscopy During the FIREX-AQ Field Campaign

We introduce and evaluate an approach for the simultaneous retrieval of aerosol and surface properties from Airborne Visible/Infrared Imaging Spectrometer Classic (AVIRIS-C) data collected during wildfires. The joint National Aeronautics and Space Administration (NASA) National Oceanic and Atmospheric Administration Fire Influence on Regional to Global Environments and Air Quality field campaign took place in August 2019, and involved two aircraft and coordinated ground-based observations. The AVIRIS-C instrument acquired data from onboard NASA's high altitude ER-2 research aircraft, coincident in space and time with aerosol observations obtained from the Aerosol Robotic Network (AERONET) DRAGON mobile platform in the smoke plume downwind of the Williams Flats Fire in northern Washington in August 2019. Observations in this smoke plume were used to assess the capacity of optimal-estimation based retrievals to simultaneously estimate aerosol optical depth (AOD) and surface reflectance from Visible Shortwave Infrared (VSWIR) imaging spectroscopy. Radiative transfer modeling of the sensitivities in spectral information collected over smoke reveal the potential capacity of high spectral resolution retrievals to distinguish between sulfate and smoke aerosol models, as well as sensitivity to the aerosol size distribution. Comparison with ground-based AERONET observations demonstrates that AVIRIS-C retrievals of AOD compare favorably with direct sun AOD measurements. Our analyses suggest that spectral information collected from the full VSWIR spectral interval, not just the shortest wavelengths, enables accurate retrievals. We use this approach to continuously map both aerosols and surface reflectance at high spatial resolution across heterogeneous terrain, even under relatively high AOD conditions associated with wildfire smoke.

FIREX-AQ↗
DOE OSTI2021

First-principles calculations of metal surfaces. I. Slab-consistent bulk reference for convergent surface properties

The first-principles computation of the surfaces of metals is typically accomplished through slab calculations of finite thickness. The extraction of a convergent surface formation energy from slab calculations is dependent upon defining an appropriate bulk reference energy. I describe a method for an independently computed, slab-consistent bulk reference that leads to convergent surface formation energies from slab calculations that also provides realistic uncertainties for the magnitude of unavoidable nonlinear divergence in the surface formation energy with slab thickness. In conclusion, the accuracy is demonstrated on relaxed, unreconstructed low-index aluminum surfaces with slabs with up to 35 layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1977

Mars surface properties observed by earth-based radar at 70-, 12.5-, and 3.8-cm wavelengths

In the present paper, the results are summarized of a study aimed at determining the small-scale surface properties of Mars (for the Viking project) from a thorough review of all available Martian radar data for the 1973 opposition. Analysis of the quasi-specular echo component showed changes in apparent reflectivity of at least 5 to 1. If attributed entirely to variations in surface material, these correspond to dielectric constants between 1.6 and 4.0. Values of rms surface slope on 1- to 100-m scales range from as low as 0.5 degrees in tablelands near Valles Marineris to more than 3.0 degrees in certain other areas. There is a weak correlation between the small-scale surface characteristics inferred from radar and those inferred from Mariner 9 images and other remote-sensing data sets.

Simpson, R. A.↗
NASA NTRS1976

Surface properties of ocean fronts

Background information on oceanic fronts is presented and the results of several models which were developed to study the dynamics of oceanic fronts and their effects on various surface properties are described. The details of the four numerical models used in these studies are given in separate appendices which contain all of the physical equations, program documentation and running instructions for the models.

Wolff, P. M.↗
DOE OSTI2026

Variation in surface properties as error sources in dynamic temperature measurements

Most temperature measurement methods rely upon the assumption of a single uniform source as part of the analysis in inferring an observed temperature T from the surface of a material. This is true for the radiometric and spectroscopic methods we rely upon in shock physics. However, there are obvious cases where this is a poor assumption that can cause large errors in analysis, such as the measurement of emission from a surface composed of more than one material, such as a rusted surface of Fe and Fe 2 O 3 , or a multi-material surface that could be produced through alloying methods (e.g., mokume gane) or 3D printing. Here we perform an initial examination of the effects of varied surface properties upon the analysis using idealized test data to constrain when we may have better confidence in the resulting calculations. We also examine the structures of the fits to test whether, in principle, comparing the fit with ideal gray bodies would reveal such a structure and enable the researcher to identify when a two-temperature fitting model should be used instead of a single- T model or a wavelength-dependent emissivity model.

36 MATERIALS SCIENCE↗
NASA NTRS1965

Surface properties of metals

Effect of surface oxidation on spectral emission of stainless steel and Pt and Inconel surfaces coated with SiO and method for obtaining Al surfaces with periodic distributions of ridges

STAINLESS STEEL↗
NASA NTRS2005

Application of Glow Discharge Plasma to Alter Surface Properties of Materials

Some polymer materials that are considered important for spaceport operations are rendered noncompliant when subjected to the Kennedy Space Center (KSC) Standard electrostatic testing. These materials operate in stringent environmental conditions, such as high humidity. Treating materials that fail electrostatic testing and altering their surface properties so that they become compliant would result in considerable cost savings. Significant improvement in electrostatic dissipation of Saf-T-Vu PVC after treatment with air Atmospheric Plasma Glow Discharge (APGD) was observed and the material now passed the KSC electrostatic test. The O:C ratio on the surface, as monitored by X-ray Photoelectron Spectroscopy, increased from 0.165 tO 0.275 indicating enhanced oxidation, and surface contact angle measurements decreased from 107.5 to 72.6 showing increased hydrophilicity that accounted for the increased conductivity. Monitoring of the aging showed that the materials hydrophobic recovery resulted in it failing the electrostatic test 30 hours after treatment. This was probably due to the out-diffusion of the added Zn, Ba, and Cd salt stabilizers detected on the surface and/or diffusion of low molecular weight oligomers. On going work includes improving the long term hydrophilicity by optimizing the APGD process with different gas mixtures. Treatment of other spaceport materials is also presented.

Trigwell, Steve↗
NASA NTRS1989

Amphiphilic components of the Murchison carbonaceous chondrite - Surface properties and membrane formation

The possibility that the amphiphilic compounds in carbonaceous meteorites whose physicochemical properties are presently studied may represent sources of lipidlike compounds which could have evolved as membrane components in primitive cells is investigated in samples of the Murchison CM2 chondrite. Surface properties and membrane formation are obtained for three fractions isolated by two-dimensional thin-layer chromatography. It is concluded that a small, undefined fraction of Murchison components exhibits amphiphilic properties which allow assembly into boundary membranes.

Deamer, D. W.↗
DOE OSTI2021

Simultaneous mapping of nanoscale dielectric, electrochemical, and ferroelectric surface properties of van der Waals layered ferroelectric via advanced SPM

Ferroelectric surfaces involve a complex interplay between polarization and dielectric properties, internal and external surface charge screening, and ionic and electrochemical effects. There is currently no good way to simultaneously capture all the required information at appropriate length scales. To this end, we present an advanced scanning probe microscopy approach for simultaneously mapping surface potential, dielectric, and piezoelectric properties on the nanoscale. For quantitatively mapping electromechancial properties, we utilize interferometric displacement sensing piezoresponse force microscopy, which measures the effective piezoelectric coefficient free of background artifacts such as the cantilever body electrostatics. The dielectric and surface electrochemical properties are captured during G-mode electrostatic force microscopy/Kelvin probe force microscopy operated in the lift mode. We show the capabilities of this approach on the chemically phase separated composite sample consisting of a van der Waals layered ferroelectric CuInP 2 S 6 phase and a non-polar In 4/3 P 2 S 6 phase. Finally, we demonstrate domain structure evolution during thermally stimulated phase transition.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Characterization of the Surface Properties of MUSES-C/Hayabusa Spacecraft Target Asteroid 25143 Itokawa (1998 SF36)

Several spacecraft missions have recently targeted asteroids to study their morphologies and physical properties (e.g. Galileo, NEAR Shoemaker), and more are planned. MUSES-C is a Japanese mission designed to rendezvous with a near-Earth asteroid (NEA). The MUSES-C spacecraft, Hayabusa, was launched successfully in May 2003. It will rendezvous with its target asteroid in 2005, and return samples to the Earth in 2007. Its target, 25143 Itokawa (1998 SF36), made a close approach to the Earth in 2001. We collected an extensive ground-based database of broadband photometry obtained during this time, which maximized the phase angle coverage, to characterize this target in preparation for the mission. Our project was designed to capitalize on the broadband UBVRI photometric observations taken with a series of telescopes, instrumentation, and observers. Photometry and spectrophotometry of Itokawa were acquired at Lowell, McDonald, Steward, Palomar, Table Mountain and Kiso Observatories. The photometric data sets were combined to calculate Hapke model parameters of the surface material of Itokawa, and examine the solar-corrected broadband color characteristics of the asteroid. Broadband photometry of an object can be used to: (1) determine its colors and thereby contribute to the understanding of its surface composition and taxonomic class, and (2) infer global physical surface properties of the target body. We present both colors from UBVRI observations of the MUSES-C target Itokawa, and physical properties derived by applying a Hapke model to the broadband BVRI photometry.

Lederer, S. M.↗
NASA NTRS1973

A parametric study of cut-off corrugated surface properties

Corrugated horns involve a junction between the corrugated surface and a conducting groundplane. Proper horn design requires an understanding of the electromagnetic properties of the corrugated surface and this junction. Therefore, an integral equation solution has been used to study the influence of corrugation density and shape on the power loss. Surface current, and the scattering from a groundplane-corrugated surface junction. Both square and vee shape corrugations have been considered over the range of corrugation depths where the surface acts as a cut-off corrugated surface.

Mentzer, C. A.↗
NASA NTRS1974

Some surface properties of Apollo 17 soils

The surface chemistry of Apollo 17 lunar fines samples 74220 (the orange soil) and 74241 (the gray control soil) has been studied by measuring the adsorption of nitrogen, argon, and oxygen (all at -196 C) and also water vapor (at 20 C or 22 C). In agreement with results for samples from other missions, both samples had low initial specific surface areas, consisted of nonporous particles, and were attacked by water vapor at high relative pressures to give an increased specific surface area and create a pore system which gave rise to a capillary condensation hysteresis loop in the adsorption isotherms. In contrast to previous samples, both of the Apollo 17 soils were partially hydrophobic in their initial interaction with water vapor (both samples were completely hydrophilic after the reaction with water). The results are consistent with formation at high temperatures without subsequent exposure to significant amounts of water.

Holmes, H. F.↗
NASA NTRS1991

Uranus satellites - Surface properties

The post-Voyager knowledge of the photometric, colorimetric, spectral, and thermal properties of the Uranian satellites is reviewed, focusing on such fundamental physical properties as albedo, color, and surface texture. While albedo variations of at least a factor of 2 exist, color differences are almost absent (Miranda) or subdued (Oberon). In the case of Titania, the strong opposition effect reported by ground-based observers was confirmed by Voyager. Voyager did not observe the opposition parts of the phase curves of the other satellites. Voyager thermal observations of Ariel and Miranda suggest that both have highly porous regoliths, thermophysically similar to those of Jupiter's icy satellites. At the time of the flyby (south pole facing the sun), maximum surface temperatures reached or exceeded 85 K, but nighttime polar temperatures are predicted to drop to 20 to 30 K because each pole spends about 40 yr in darkness. Ground-based spectroscopy identified water ice as an important surface constituent.

Veverka, J.↗