Search NASA⌕ Search

SEARCH · Search NASA

Results for “TCV”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Review of operational aspects of initial experiments utilizing the U.S. MLS

An exercise to support the Federal Aviation Administration in demonstrating the U.S. candidate for an international microwave landing system (MLS) was conducted by NASA. During this demonstration the MLS was utilized to provide the TCV Boeing 737 research airplane with guidance for automatic control during transition from conventional RNAV to MLS RNAV in curved, descending flight; flare; touchdown; and roll-out. Flight profiles, system configuration, displays, and operating procedures used in the demonstration are described, and preliminary results of flight data analysis are discussed. Recent experiences with manually controlled flight in the NAFEC MLS environment are also discussed. The demonstration shows that in automatic three-dimensional flight, the volumetric signal coverage of the MLS can be exploited to enable a commercial carrier class airplane to perform complex curved, descending paths with precision turns into short final approaches terminating in landing and roll-out, even when subjected to strong and gusty tail and cross wind components and severe wind shear.

Walsh, T. M.↗

Wind-tunnel results of the aerodynamic characteristics of a 1/8-scale model of a twin engine short-haul transport

A wind tunnel test was conducted in the Langley V/STOL tunnel to define the aerodynamic characteristics of a 1/8-scale twin-engine short haul transport. The model was tested in both the cruise and approach configurations with various control surfaces deflected. Data were obtained out of ground effect for the cruise configuration and both in and out of ground effect for the approach configuration. These data are intended to be a reference point to begin the analysis of the flight characteristics of the NASA terminal configured vehicle (TCV) and are presented without analysis.

Paulson, J. W., Jr.↗

Flight experiments to improve terminal area operations

A brief description is given of the objectives and activities of the terminal configured vehicle (TCV) program and of some of the airborne facilities. A short analysis of some particular problems of CTOL operations in the terminal area is also presented to show how the program's technical objectives are related to the defined problems. The test aircraft was flown both manually and automatically with manual monitoring over paths including 130 deg intercepts and 2.0 km (1.1. n. mi.) and 0.8 km (0.44 n. mi.) finals. Some statistical data are presented from these and other flight profiles designed to address specific terminal in the next biennium and their application to the terminal area. A description of work being undertaken to study the addition of adjacent traffic information to present map displays is also given.

Salmirs, S.↗

Flight experiments to improve terminal area operations

A brief description is given of the objectives and activities of the terminal configured vehicle (TCV) program and of some of the airborne facilities. A short analysis of some particular problems in CTOL operations in the terminal area is also presented to show how the program's technical objectives are related to the defined problems. The test aircraft was flown both manually and automatically with manual monitoring over paths including 130 deg intercepts and 2.0 km and 0.8 km finals. Some statistical data are presented from these and other flight profiles designed to address specific terminal area problems. An overview is presented of research studies receiving emphasis in the next biennium and their application to the terminal area. A description of work undertaken to study the addition of adjacent traffic information to present map displays is also given.

Salmirs, S.↗

Flight demonstrations of curved, descending approaches and automatic landings using time referenced scanning beam guidance

The Terminal Configured Vehicle (TCV) program operates a Boeing 737 modified to include a second cockpit and a large amount of experimental navigation, guidance and control equipment for research on advanced avionics systems. Demonstration flights to include curved approaches and automatic landings were tracked by a phototheodolite system. For 50 approaches during the demonstration flights, the following results were obtained: the navigation system, using TRSB guidance, delivered the aircraft onto the 3 nautical mile final approach leg with an average overshoot of 25 feet past centerline, subjet to a 2-sigma dispersion of 90 feet. Lateral tracking data showed a mean error of 4.6 feet left of centerline at the category 1 decision height (200 feet) and 2.7 feet left of centerline at the category 2 decision height (100 feet). These values were subject to a sigma dispersion of about 10 feet. Finally, the glidepath tracking errors were 2.5 feet and 3.0 feet high at the category 1 and 2 decision heights, respectively, with a 2 sigma value of 6 feet.

White, W. F.↗

Automatic flight performance of a transport airplane on complex microwave landing system paths

Essential characteristics of the U.S. microwave landing system (MLS) and the TCV B-737 aircraft used in flight demonstrations are described, with special emphasis on the analysis of the approach paths. MLS is used to provide the aircraft with guidance for automatic control on complex, curved descending paths with precision turns into short final approaches terminating in landing and rollout, even when subjected to strong and gusty tail- and cross-wind components and severe wind shear. The tracking performance achieved on these paths under MLS guidance is examined in detail, and the wind environment where the flights are conducted are quantified. The flights demonstrate the utility of the wide-area coverage of MLS for curved, descending paths commencing with a standard RNAV approach into a terminal area and continuation of this approach throughout the MLS coverage and onto the runway.

Walsh, T. M.↗

Guidance and navigation for automatic landing, rollout, and turnoff using MLS and magnetic cable sensors

This paper describes the navigation and guidance system developed for the TCV B-737, a Langley Field NASA research aircraft, and presents the results of an evaluation during final approach, landing, rollout and turnoff obtained through a nonlinear digital simulation. A Kalman filter (implemented in square root form) and a third order complementary filter were developed and compared for navigation. The Microwave Landing Systems (MLS) is used for all phases of the flight for navigation and guidance. In addition, for rollout and turnoff, a three coil sensor which detects the magnetic field induced by a buried wire in the runway (magnetic leader cable) is used. The outputs of the sensor are processed into measurements of position and heading deviation from the wire. The results show the concept to be both feasible and practical for commercial type aircraft terminal area control.

Pines, S.↗

Flying NASA's terminal configured vehicle against the microwave landing system

Technology for advanced airborne systems and flight procedures to improve terminal-area operations in ATC environment is developed. The terminal configured vehicle (TCV) aircraft, its integrated digital electronic displays and flight controls, and how the pilot interfaces with the aircraft to fly precise curved descending approaches using Microwave Landing System (MLS) guidance are discussed.

Person, L. H., Jr.↗

Comments on a proposed standard wind hazard environment and its use in real-time aircraft simulations

A set of mean-wind profiles and associated turbulence models have been proposed by the FAA as a standard wind hazard environment to be used in piloted training and research simulators. The 'wind hazard package' is described along with a 'strawman' method of implementation into the real-time simulation of NASA's Terminal Configured Vehicle (TCV). Simulation results of both piloted and automatic landings have raised questions about the validity of the wind hazard environment, and the use of a lumped parameter quasi-steady flow aerodynamic model in this environment. Areas of discussion will include turbulence models, span and area averaging filters, gust penetration effects, and the need for the addition of terms in the moment equations to represent unsteady flow characteristics.

Dieudonne, J. E.↗

Terminal configured vehicle program: Test facilities guide

The terminal configured vehicle (TCV) program was established to conduct research and to develop and evaluate aircraft and flight management system technology concepts that will benefit conventional take off and landing operations in the terminal area. Emphasis is placed on the development of operating methods for the highly automated environment anticipated in the future. The program involves analyses, simulation, and flight experiments. Flight experiments are conducted using a modified Boeing 737 airplane equipped with highly flexible display and control equipment and an aft flight deck for research purposes. The experimental systems of the Boeing 737 are described including the flight control computer systems, the navigation/guidance system, the control and command panel, and the electronic display system. The ground based facilities used in the program are described including the visual motion simulator, the fixed base simulator, the verification and validation laboratory, and the radio frequency anechoic facility.

Source record↗

Development and flight evaluation of automatic flare laws with improved touchdown dispersion

The paper describes the development and flight testing of automatic landing flare laws with improved longitudinal touchdown dispersion. The major sources of touchdown dispersion in current control laws and design objectives of this equipment are discussed. A ground-speed adaptive sink-rate control law and a specified flare trajectory control law were selected for development; the performance of resulting flare laws was evaluated by simulations and flight testing on the NASA TCV B-737 aircraft. These flare laws showed substantial improvement in longitudinal touchdown dispersion, when compared to a more conventional flare law used previously.

Lambregts, A. A.↗

Test results of flight guidance for fuel conservative descents in a time-based metered air traffic environment

The NASA developed, implemented, and flight tested a flight management algorithm designed to improve the accuracy of delivering an airplane in a fuel-conservative manner to a metering fix at a time designated by air traffic control. This algorithm provides a 3D path with time control (4D) for the TCV B-737 airplane to make an idle-thrust, clean configured (landing gear up, flaps zero, and speed brakes retracted) descent to arrive at the metering fix at a predetermined time, altitude, and airspeed. The descent path is calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard pressure and temperature effects. The flight management descent algorithms are described and flight test results are presented.

Knox, C. E.↗

Terminal area automatic navigation, guidance, and control 1: Automatic rollout, turnoff, and taxis

A study developed for the TCV B-737, designed to apply existing navigation aids plus magnetic leader cable signals and develop breaking and reverse thrust guidance laws to provide for rapid automated rollout, turnoff, and taxi to reduce runway occupation time for a wide variety of landing conditions for conventional commercial-type aircraft, is described. Closed loop guidance laws for braking and reverse thrust are derived for rollout, turnoff, and taxi, as functions of the landing speed, the desired taxi speed and the distance to go. Brake limitations for wet runway conditions and reverse thrust limitations are taken into account to provide decision rules to avoid tire skid and to choose an alternate turnoff point, farther down the runway, to accommodate extreme landing conditions.

Pines, S.↗

Avionics and displays in a future airspace system

The terminal configured vehicle (TCV) program was conceived to address the problems of (1) operation in the crowded terminal area airspace, and (2) integration of airborne avionics systems necessary to improve the efficiency of these operations. The program and its interaction with industry task groups are summarized, including elements of research and data collection. New technology is discussed which may be useful in implementing some defined avionics and display requirements.

Salmirs, S.↗

Design and implementation of a telecommunication interface for the TAATM/TCV real-time experiment

The traffic situation display experiment of the terminal configured vehicle (TCV) research program requires a bidirectional data communications tie line between an computer complex. The tie line is used in a real time environment on the CYBER 175 computer by the terminal area air traffic model (TAATM) simulation program. Aircraft position data are processed by TAATM with the resultant output sent to the facility for the generation of air traffic situation displays which are transmitted to a research aircraft.

Nolan, J. D.↗

Influence of display and control compatibility on pilot-induced oscillations

The differences in techniques used by seven pilots to acquire information from an advanced display for instrument approaches to and landings on a runway were investigated. A fixed base simulator programmed with dynamics resembling the terminal configured vehicle (TCV) was studied. It is shown that the seven pilots can be divided into two groups which used the display with distinctly different strategies for controlling the airplane. A related pattern of performance differences resulted. It is found that pilots who primarily use raw flight path information experience longitudinal oscillations while pilots using attitude information did not.

Waller, M. C.↗

Preliminary investigation of effects of heavy rain on the performance of aircraft

A guideline was defined for the analysis of flight data to determine the effects of rain on the aerodynamic performance of an aircraft. It distinguishes and separates the effects of horizontal wind shears, downdrafts, gusts at the phugoid frequency, and rain based on various aerodynamic parameters. Flight data from NASA LaRC's TCV B-737 were inconclusive because precipitation rates encountered probably were not high enough. However, the guideline seemed to be valid and can be used on further flight data evaluations. Difficulties in this type of data analysis are discussed. Other indirect influences of rain on the degradation of airplane performance are also considered.

Lee, O. W. K.↗

An aircraft sensor fault tolerant system

The design of a sensor fault tolerant system which uses analytical redundancy for the Terminal Configured Vehicle (TCV) research aircraft in a Microwave Landing System (MLS) environment was studied. The fault tolerant system provides reliable estimates for aircraft position, velocity, and attitude in the presence of possible failures in navigation aid instruments and onboard sensors. The estimates, provided by the fault tolerant system, are used by the automated guidance and control system to land the aircraft along a prescribed path. Sensor failures are identified by utilizing the analytic relationship between the various sensor outputs arising from the aircraft equations of motion.

Caglayan, A. K.↗