Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIMING PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Collar Properties and Measurement Time Confer Minimal Bias Overall on Annual Soil Respiration Estimates in a Global Database

Abstract Measuring the soil‐to‐atmosphere carbon dioxide (CO 2 ) flux (soil respiration, R S ) is important to understanding terrestrial carbon balance and to forecasting climate change. Such measurements are frequently made using measurement collars permanently inserted into the soil surface. However, differences in measurement duration and frequency, as well as collar properties, may lead to biases in the estimation of annual R S . Using a newly updated global R S database (SRDB‐V5), we investigated the annual R S bias associated with five methodological factors: collar height, collar coverage area, collar insertion depth, measurement duration, and measurement frequency. We found that annual R S was negatively correlated with collar insertion depth, consistent with the idea that collar insertion cuts roots and thus reduces R S . Annual R S was also negatively related with collar height and collar coverage area, perhaps because uniform head‐space mixing is difficult to achieve in larger volume chambers; however, these effects were quantitatively small (bias of ~2% to 10% of mean R S ). We found no correlation of measurement duration or measurement frequency with annual R S . These findings suggest that variation in R S methodology generally introduces minimal bias overall. Therefore, compilations of minimally adjusted annual R S measurements provide a reliable resource for synthesis studies, global annual R S modeling, and investigation of how soil carbon responds to climate change.

Jian, Jinshi↗
NASA NTRS1993

On the design of structural components using materials with time-dependent properties

The application of the elastic-viscoelastic correspondence principle is presented as a design tool for structural design engineers for composite material applications. The classical problem of cantilever beams is used as the illustration problem. Both closed-form and approximate numerical solutions are presented for several different problems. The application of the collocation method is presented as a viable and simple design tool to determine the time-dependent behavior and response of viscoelastic composite beams under load.

Rodriguez, Pedro I.↗
DOE OSTI2015

Incorporation of memory effects in coarse-grained modeling via the Mori-Zwanzig formalism

The Mori-Zwanzig formalism for coarse-graining a complex dynamical system typically introduces memory effects. The Markovian assumption of delta-correlated fluctuating forces is often employed to simplify the formulation of coarse-grained (CG) models and numerical implementations. However, when the time scales of a system are not clearly separated, the memory effects become strong and the Markovian assumption becomes inaccurate. To this end, we incorporate memory effects into CG modeling by preserving non-Markovian interactions between CG variables, and the memory kernel is evaluated directly from microscopic dynamics. For a specific example, molecular dynamics (MD) simulations of star polymer melts are performed while the corresponding CG system is defined by grouping many bonded atoms into single clusters. Then, the effective interactions between CG clusters as well as the memory kernel are obtained from the MD simulations. The constructed CG force field with a memory kernel leads to a non-Markovian dissipative particle dynamics (NM-DPD). Quantitative comparisons between the CG models with Markovian and non-Markovian approximations indicate that including the memory effects using NM-DPD yields similar results as the Markovian-based DPD if the system has clear time scale separation. However, for systems with small separation of time scales, NM-DPD can reproduce correct short-time properties that are related to how the system responds to high-frequency disturbances, which cannot be captured by the Markovian-based DPD model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Near-Real Time Cloud Properties and Aircraft Icing Indices from GEO and LEO Satellites

Imagers on many of the current and future operational meteorological satellites in geostationary Earth orbit (GEO) and lower Earth orbit (LEO) have enough spectral channels to derive cloud microphysical properties useful for a variety of applications. The products include cloud amount, phase, optical depth, temperature, height and pressure, thickness, effective particle size, and ice or liquid water path, shortwave albedo, and outgoing longwave radiation for each imager pixel. Because aircraft icing depends on cloud temperature, droplet size, and liquid water content as well as aircraft variables, it is possible to estimate the potential icing conditions from the cloud phase, temperature, effective droplet size, and liquid water path. A prototype icing index is currently being derived over the contiguous USA in near-real time from Geostationary Operational Environmental Satellite (GOES-10 and 12) data on a half-hourly basis and from NOAA- 16 Advanced Very High Resolution (AVHRR) data when available. Because the threshold-based algorithm is sensitive to small errors and differences in satellite imager and icing is complex process, a new probability based icing diagnosis technique is developed from a limited set of pilot reports. The algorithm produces reasonable patterns of icing probability and intensities when compared with independent model and pilot report data. Methods are discussed for improving the technique for incorporation into operational icing products.

Minnis, Patrick↗
DOE OSTI2013

TIME-RESOLVED PROPERTIES AND GLOBAL TRENDS IN dMe FLARES FROM SIMULTANEOUS PHOTOMETRY AND SPECTRA

We present a homogeneous analysis of line and continuum emission from simultaneous high-cadence spectra and photometry covering near-ultraviolet and optical wavelengths for 20 M dwarf flares. These data were obtained to study the white-light continuum components at bluer and redder wavelengths than the Balmer jump. Our goals were to break the degeneracy between emission mechanisms that have been fit to broadband colors of flares and to provide constraints for radiative-hydrodynamic (RHD) flare models that seek to reproduce the white-light flare emission. The main results from the analysis are the following: (1) the detection of Balmer continuum (in emission) that is present during all flares and with a wide range of relative contributions to the continuum flux at bluer wavelengths than the Balmer jump; (2) a blue continuum at flare maximum that is linearly decreasing with wavelength from {lambda} = 4000-4800 A, indicative of hot, blackbody emission with typical temperatures of T{sub BB} {approx} 9000-14, 000 K; (3) a redder continuum apparent at wavelengths longer than H{beta} ({lambda} {approx}> 4900 A) which becomes relatively more important to the energy budget during the late gradual phase. The hot blackbody component and redder continuum component have been detected in previous studies of flares. However, we have found that although the hot blackbody emission component is relatively well-represented by a featureless, single-temperature Planck function, this component includes absorption features and has a continuum shape strikingly similar to the spectrum of an A-type star as directly observed in our flare spectra. New model constraints are presented for the time evolution among the hydrogen Balmer lines and between Ca II K and the blackbody continuum emission. We calculate Balmer jump flux ratios and compare to the solar-type flare heating predictions from RHD models. The model ratios are too large and the blue-optical ({lambda} = 4000-4800 A) slopes are too red in both the impulsive and gradual decay phases of all 20 flares. This discrepancy implies that further work is needed to understand the heating at high column mass during dMe flares.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2018

Real-time thermomechanical property monitoring during ion beam irradiation using in situ transient grating spectroscopy

A facility for continuously monitoring the thermal and elastic performance of materials under exposure to ion beam irradiation has been designed and commissioned. By coupling an all-optical, non-contact, non-destructive measurement technique known as transient grating spectroscopy (TGS) to a 6 MV tandem ion accelerator, bulk material properties may be measured at high fidelity as a function of irradiation exposure and temperature. Ion beam energies and optical parameters may be tuned to ensure that only the properties of the ion-implanted surface layer are interrogated. This facility provides complementary capabilities to the set of facilities worldwide which have the ability to study the evolution of microstructure in situ during radiation exposure, but lack the ability to measure bulk-like properties. Here, the measurement physics of TGS, design of the experimental facility, and initial results using both light and heavy ion exposures are described. Lastly, several short- and long-term upgrades are discussed which will further increase the capabilities of this diagnostic.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Impact of chitin nanofibers and nanocrystals from waste shrimp shells on mechanical properties, setting time, and late-age hydration of mortar

Every year ~ 6–8 million tonnes of shrimp, crab, and lobster shell wastes are generated, requiring costly disposal procedures. In this study, the chitin content of shrimp shell waste was oxidized to produce chitin nanocrystals (ChNC) and mechanically fibrillated to obtain chitin nanofibers (ChNF) and evaluated as additives for mortar. ChNF (0.075 wt%) and ChNC (0.05 wt%) retarded the final setting time by 50 and 30 min, likely through cement dispersion by electrostatic repulsion. ChNF (0.05 wt%) with a larger aspect ratio than ChNC resulted in the greatest improved flexural strength and fracture energy by 24% and 28%. Elastic modulus increased by up to 91% and 43% with ChNC and ChNF. Solid-state nuclear magnetic resonance (NMR) showed ChNF (0.05 wt%) enhanced calcium–silicate–hydrate structure with a 41% higher degree of polymerization, 9% more silicate chain length, and a 15% higher degree of hydration at 28 days. Based on the findings, chitin seems a viable biomass source for powerful structural nanofibers and nanocrystals for cementitious systems to divert seafood waste from landfills or the sea.

36 MATERIALS SCIENCE↗
DOE OSTI2012

RXTE OBSERVATIONS OF ANOMALOUS X-RAY PULSAR 1E 1547.0-5408 DURING AND AFTER ITS 2008 AND 2009 OUTBURSTS

We present the results of Rossi X-ray Timing Explorer and Swift monitoring observations of the magnetar 1E 1547.0-5408 following the pulsar's radiative outbursts in 2008 October and 2009 January. We report on a study of the evolution of the timing properties and the pulsed flux from 2008 October 4 through 2009 December 26. In our timing study, a phase-coherent analysis shows that for the first 29 days following the 2008 outburst, there was a very fast increase in the magnitude of the rotational frequency derivative {nu}-dot, such that {nu}-ddot was a factor of {approx}60 larger than that reported in data from 2007. This {nu}-dot magnitude increase occurred in concert with the decay of the pulsed flux following the start of the 2008 event. Following the 2009 outburst, for the first 23 days, {nu}-ddot was consistent with zero, and {nu}-dot had returned to close to its 2007 value. In contrast to the 2008 event, the 2009 outburst showed a major increase in persistent flux, relatively little change in the pulsed flux, and sudden significant spectral hardening {approx}15 days after the outburst. We show that, excluding the month following each of the outbursts, and because of the noise and the sparsity in the data, multiple plausible timing solutions fit the pulsar's frequency behavior. We note similarities in the behavior of 1E 1547.0-5408 following the 2008 outburst to that seen in the AXP 1E 1048.1-5937 following its 2001-2002 outburst and discuss this in terms of the magnetar model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

On the relaxation behaviors of slow and classical glitches: Observational biases and their opposite recovery trends

We study the pulsar timing properties and the data analysis methods of glitch recoveries. In some cases one first fits the times of arrival (TOAs) to obtain the 'time-averaged' frequency ν and its first derivative ν-dot , and then fits models to them. However, our simulations show that ν and ν-dot obtained in this way are systematically biased unless the time intervals between the nearby data points of TOAs are smaller than about 10{sup 4} s, which is much shorter than typical observation intervals. Alternatively, glitch parameters can be obtained by fitting the phases directly with relatively smaller biases, but the initial recovery time scale is usually chosen by eye, which may introduce a strong bias. We also construct a phenomenological model by assuming a pulsar spin-down law of ν-dot ν{sup −3}=−H{sub 0}G(t) with G(t) = 1 + κe {sup –t/τ} for a glitch recovery, where H {sub 0} is a constant and κ and τ are the glitch parameters to be found. This model can reproduce the observed data of slow glitches from B1822–09 and the giant classical glitch of B2334+61, with κ < 0 or κ > 0, respectively. We then use this model to simulate TOA data and test several fitting procedures for a glitch recovery. The best procedure is (1) to use a very high order polynomial (e.g., to 50th order) to precisely describe the phase, (2) obtain ν(t) and ν-dot (t) from the polynomial, then (3) obtain the glitch parameters from ν(t) or ν-dot (t). Finally, the uncertainty in the starting time t {sub 0} of a classical glitch causes uncertainties in some glitch parameters, but less so for a slow glitch, t {sub 0}, of which can be determined from data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

SPECTRAL-TIMING ANALYSIS OF THE LOWER kHz QPO IN THE LOW-MASS X-RAY BINARY AQUILA X-1

Spectral-timing products of kilohertz quasi-periodic oscillations (kHz QPOs) in low-mass X-ray binary (LMXB) systems, including energy- and frequency-dependent lags, have been analyzed previously in 4U 1608-52, 4U 1636-53, and 4U 1728-34. Here, we study the spectral-timing properties of the lower kHz QPO of the neutron star LMXB Aquila X-1 for the first time. We compute broadband energy lags as well as energy-dependent lags and the covariance spectrum using data from the Rossi X-ray Timing Explorer . We find characteristics similar to those of previously studied systems, including soft lags of ∼30 μ s between the 3.0–8.0 keV and 8.0–20.0 keV energy bands at the average QPO frequency. We also find lags that show a nearly monotonic trend with energy, with the highest-energy photons arriving first. The covariance spectrum of the lower kHz QPO is well fit by a thermal Comptonization model, though we find a seed photon temperature higher than that of the mean spectrum, which was also seen in Peille et al. and indicates the possibility of a composite boundary layer emitting region. Lastly, we see in one set of observations an Fe K component in the covariance spectrum at 2.4- σ confidence, which may raise questions about the role of reverberation in the production of lags.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

MULTIWAVELENGTH OBSERVATIONS OF THE BLACK HOLE TRANSIENT XTE J1752-223 DURING ITS 2010 OUTBURST DECAY

Galactic black hole transients show many interesting phenomena during outburst decays. We present simultaneous X-ray (RXTE, Swift, and INTEGRAL), and optical/near-infrared (O/NIR) observations (SMARTS) of the X-ray transient XTE J1752-223 during its outburst decay in 2010. The multiwavelength observations over 150 days in 2010 cover the transition from soft to hard spectral state. We discuss the evolution of radio emission with respect to the O/NIR light curve which shows several flares. One of those flares is bright and long, starting about 60 days after the transition in X-ray timing properties. During this flare, the radio spectral index becomes harder. Other smaller flares occur along with the X-ray timing transition, and also right after the detection of the radio core. We discuss the significances of these flares. Furthermore, using the simultaneous broadband X-ray spectra including INTEGRAL, we find that a high energy cut-off with a folding energy near 250 keV is necessary around the time that the compact jet is forming. The broadband spectrum can be fitted equally well with a Comptonization model. In addition, using photoelectric absorption edges in the XMM-Newton Reflection Grating Spectrometer X-ray spectra and the extinction of red clump giants in the direction of the source, we find a lower limit on the distance of >5 kpc.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Tracking the evolution of quasi-periodic oscillation in RE J1034+396 using the Hilbert-Huang transform

RE J1034+396, a narrow-line Seyfert 1 active galactic nucleus (AGN), is the first example of AGNs that exhibited a nearly coherent quasi-periodic oscillation (QPO) for the data collected by XMM-Newton in 2007. The spectral behaviors and timing properties of the QPO have been studied since its discovery. We present an analysis of the QPO in RE J1034+396 based on the Hilbert-Huang transform. Comparing with other time-frequency analysis methods, the Hilbert spectrum reveals the variation of the QPO period in great detail. Furthermore, the empirical mode decomposition provides bandpass-filtered data that can be used in the O – C and correlation analysis. We suggest that it is better to divide the evolution of the QPO in this observation into three epochs according to their different periodicities. In addition to the periodicities, the correlations between the QPO periods and corresponding mean count rates are also different in these three epochs. Further examining the phase lags in these epochs, we found no significant phase lags between the soft and hard X-ray bands, which is also confirmed in the QPO phase-resolved spectral analysis. Finally, we discuss the indications of current models including a spotted accretion disk, diskoseismology, and oscillation of shock according to the observed time-frequency and spectral behaviors.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

X-ray spectral and timing behavior of Scorpius X-1. Spectral hardening during the flaring branch

We present an analysis of the spectral and timing properties of X-ray emission from the Z-source Sco X-1 during its evolution between the horizontal (HB) and flaring (FB) branches observed with the Rossi X-ray Timing Explorer during the 1996-2002 period. We find that the broadband (3-250 keV) energy spectra during all spectral states can be adequately reproduced by a model, consisting of two Comptonized components and an iron line. We suggest that the seed photons of kT{sub s1} ≲ 0.7 keV coming from the disk and of temperature kT{sub s2} ≲ 1.8 keV coming from the neutron star (NS) are each upscattered by hot electrons of a 'Compton cloud' (hereafter the Comptb1 and Comptb2 components, respectively, which are associated with the similarly subscripted parameters). The photon power-law index Γ{sub 2} is almost constant (Γ{sub 2} ∼ 2) for all spectral states. In turn, Γ{sub 1} demonstrates a two-phase behavior with the spectral state: Γ{sub 1} is quasi-constant at the level Γ{sub 1} ∼ 2 for the HB–NB and Γ{sub 1} is less than 2, namely in the range of 1.3 < Γ{sub 1} < 2, when the source traces the FB. We also detect a decrease kT{sub s2} from 1.8 keV to 0.7 keV during the FB. We interpret this apparent quasi-stability of the indices during the HB–NB in the framework of the model in which the spectrum is determined by the Comptonized thermal components. This effect established for the Comptonized spectral components of the Z-source Sco X-1 is similar to what was previously found in the atoll sources 4U 1728-34, GX 3+1 and 4U 1820-30 and the Z-source GX 340+0 through all spectral states. However, we interpret the index reduction phase detected during the FB in Sco X-1 within the framework of a model in which the spectrum at the FB is determined by high radiation pressure from the NS surface.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

X-RAY SPECTRAL RESIDUALS IN NGC 5408 X-1: DIFFUSE EMISSION FROM STAR FORMATION, OR THE SIGNATURE OF A SUPER-EDDINGTON WIND?

If ultraluminous X-ray sources (ULXs) are powered by accretion onto stellar remnant black holes, then many must be accreting at super-Eddington rates. It is predicted that such high accretion rates should give rise to massive, radiatively driven winds. However, observational evidence of a wind, in the form of absorption or emission features, has remained elusive. As such, the reported detection of X-ray spectral residuals in XMM-Newton spectra of NGC 5408 X-1, which could be related to absorption in a wind is potentially very exciting. However, it has previously been assumed by several authors that these features simply originate from background diffuse plasma emission related to star formation in the ULX’s host galaxy. In this work we utilize the spatial resolving power of Chandra to test whether we can rule out this latter interpretation. We demonstrate that the majority of the luminosity in these spectral features is emitted from a highly localized region close to the ULX, and appears point-like even with Chandra. It is therefore highly likely that the spectral features are associated with the ULX itself, and little of the flux in this spectral component originates from spatially extended emission in the host galaxy. This may be consistent with the suggestion of absorption in an optically thin phase of a super-Eddington wind. Alternatively, we could be seeing emission from collisionally ionized material close to the black hole, but critically this would be difficult to reconcile with models where the source inclination largely determines the observed X-ray spectral and timing properties.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

Properties of unique hard X-ray dips observed from GRS 1915+105 and IGR J17091–3624 and their implications

We report a comprehensive study on spectral and timing properties of hard X-ray dips uniquely observed in some so-called variability classes of the micro-quasars GRS 1915+105 and IGR J17091–3624. These dips are characterized by a sudden decline in the 2.0-60.0 keV X-ray intensity by a factor of 4-12 simultaneous with the increase in hardness ratio by a factor of 2-4. Using 31 observations of GRS 1915+105 with RXTE/PCA, we show that different behaviors are observed in different types of variability classes, and we find that a dichotomy is observed between classes with abrupt transitions versus those with smoother evolution. For example, both energy-lag spectra and frequency-lag spectra of hard X-ray dips in classes with abrupt transitions and shorter dip intervals show hard-lag (hard photons lag soft photons), while both lag spectra during hard dips in classes with smoother evolution and longer dip intervals show soft-lag. Both lag time-scales are of the order of 100-600 mS. We also show that timing and spectral properties of hard X-ray dips observed in light curves of IGR J17091–3624 during its 2011 outburst are consistent with the properties of the abrupt transitions in GRS 1915+105 rather than smooth evolutions. A global correlation between the X-ray intensity cycle time and hard dip time is observed for both abrupt and smooth transition which may be due to two distinct physical processes whose time-scales are eventually correlated. We discuss implications of our results in the light of some generic models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

GX 3+1: THE STABILITY OF SPECTRAL INDEX AS A FUNCTION OF MASS ACCRETION RATE

We present an analysis of the spectral and timing properties observed in X-rays from neutron star (NS) binary GX 3+1 (4U 1744-26) during long-term transitions between the faint and bright phases superimposed on short-term transitions between lower banana (LB) and upper banana (UB) branches in terms of its color-color diagram. We analyze all observations of this source obtained with the Rossi X-ray Timing Explorer and Beppo SAX satellites. We find that the X-ray broadband energy spectra during these spectral transitions can be adequately reproduced by a composition of a low-temperature blackbody component, a Comptonized component (COMPTB), and a Gaussian component. We argue that the electron temperature kT{sub e} of the Compton cloud monotonically increases from 2.3 keV to 4.5 keV, when GX 3+1 makes a transition from UB to LB. We also detect an evolution of noise components (a very low frequency noise and a high-frequency noise) during these LB-UB transitions. Using a disk seed photon normalization of COMPTB, which is proportional to the mass accretion rate, we find that the photon power-law index {Gamma} is almost constant ({Gamma} = 2.00 {+-} 0.02) when mass accretion rate changes by a factor of four. In addition, we find that the emergent spectrum is dominated by the strong Comptonized component. We interpret this quasi-stability of the index {Gamma} and a particular form of the spectrum in the framework of a model in which the energy release in the transition layer located between the accretion disk and NS surface dominates that in the disk. Moreover, this index stability effect now established for GX 3+1 was previously found in the atoll source 4U 1728-34 and suggested for a number of other low-mass X-ray NS binaries (see Farinelli and Titarchuk). This intrinsic behavior of NSs, in particular for atoll sources, is fundamentally different from that seen in black hole binary sources where the index monotonically increases during spectral transition from the low state to the high state and then finally saturates at high values of mass accretion rate.

79 ASTRONOMY AND ASTROPHYSICS↗