SEARCH · Search NASA

Results for “TOC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Multiple experimental studies of pore structure and mineral grain sizes of the Woodford shale in southern Oklahoma, USA

Pore structure study is an important part of unconventional shale reservoir characterization, since the pore system provides the primary petroleum storage space and fluid flow pathways. Previous studies have suggested that the pore structure is related to the total organic carbon (TOC) content, mineral compositions, and the maturity of the organic matter (OM). However, few studies have focused on the mineral grains, the primary grains being deposited but before cementation, which are the building blocks of shale. Eight Woodford Shale outcrop samples from southern Oklahoma were chosen to study the effects of mineral grain size on the pore structure characterization, using multiple and complementary experimental approaches, including laser diffraction, mineralogy, TOC, pyrolysis, liquid immersion porosimetry, mercury intrusion porosimetry, gas physisorption, (ultra) small angle X-ray scattering, scanning electron microscopy, and spontaneous imbibition. The results from different experiments of eight samples show that the Woodford Shale has the mean mineral grain diameters at 3–6 μm, a wide range of porosity at 3–40% and pore diameters at 50–1,000 nm, and various pore connectivity. Grain size variation was probably caused by the sea-level fluctuation during its deposition, which affect the porosity, pore size distribution, and pore connectivity. With decreasing mineral grain sizes, the porosity tends to increase while the pore connectivity worsens. The results also indicate that OM and carbonates in this low-maturity Woodford Shale could block the pores and decrease the porosity. Coupling with the grain size analyses, the control of depositional environment on grain sizes and subsequent effects on pore structure is identified. The pore structure characteristics over a wide pore-diameter range provided by multiple experiments could improve the understanding of storage space and fluid flow in the Woodford Shale to further increase its petroleum production.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Accessibility of Pores to Methane in New Albany Shale Samples of Varying Maturity Determined Using SANS and USANS

The accessibility of pores to methane has been investigated in Devonian New Albany Shale Formation early-mature (Ro = 0.50%) to post-mature (Ro = 1.40%) samples. A Marcellus Shale Formation sample was included to expand the maturation range to Ro 2.50%. These are organic matter-rich rocks with total organic carbon (TOC) values of 3.4 to 14.4% and porosity values of 2.19 to 6.88%. Contrast matching small-angle neutron scattering (SANS) and ultra-small angle neutron scattering (USANS) techniques were used to generate porosity-related data before and after pressure cycling under hydrostatic (in a vacuum and at 500 bar of deuterated methane) and uniaxial stress (0 to ca. 350 bar) conditions. Our results showed that the accessible porosity was small for the samples studied, ranging from zero to 2.9%. No correlation between the accessible porosity and TOC or mineralogical composition was revealed, and the most likely explanation for porosity variation was related to the thermal transformation of organic matter and hydrocarbon generation. Pressure caused improvements in accessible porosity for most samples, except the oil window sample (Ro = 0.84%). Our data show that densification of methane occurs in nanopores, generally starting at diameters smaller than 20 nm, and that the distribution of methane density is affected by pressure cycling.

03 NATURAL GAS↗

DOE OSTI2022

Tuscaloosa Marine Shale: Seal or Source? Petrophysical Comparative Study of Wells in SE Louisiana and SW Mississippi

The Tuscaloosa Marine Shale (TMS) is a versatile Late Cretaceous shale formation present in central and SE Louisiana and SW Mississippi, which drew attention because of the various roles played within the Tuscaloosa Group. In this paper, it is debated whether the Tuscaloosa Marine Shale can act as a source, reservoir, or seal all throughout the shale play or only in certain areas. Well log and core data from Adams County, Mississippi, are compared to data from East Feliciana Parish in Louisiana. Conclusions were drawn based on the results of well log analysis, X-ray Diffraction (XRD), porosity–permeability measurements, programmed pyrolysis, and fracture analysis. It was shown that the Tuscaloosa Marine Shale interval in SE Louisiana consists of important amounts of calcite, exhibits multiple natural fractures, has porosity values as high as 9.3%, and shows a TOC content of up to 2.8 wt%. On the other hand, samples from a well at the Cranfield field, MS, are characterized by considerably lower TOC values of around 0.88 wt%, porosities between 0.33% and 4%, and no serious fracturing. The formation demonstrates better reservoir and source potential in SE Louisiana and reliable CO2 sealing capacity in SW Mississippi. The analysis presented in this paper represents a holistic approach to the characterization of shale formations, is applicable to other plays around the world, and can be used as an integral part of CO2 sequestration or hydraulic fracturing programs.

04 OIL SHALES AND TAR SANDS↗

DOE OSTI2022

Organic carbon burial by river meandering partially offsets bank erosion carbon fluxes in a discontinuous permafrost floodplain

Abstract. Arctic river systems erode permafrost in their banks and mobilize particulate organic carbon (OC). Meandering rivers can entrain particulate OC from permafrost many meters below the depth of annual thaw, potentially enabling the production of greenhouse gases. However, the amount and fate of permafrost OC that is mobilized by river erosion is uncertain. To constrain OC fluxes due to riverbank erosion and deposition, we collected riverbank and floodplain sediment samples along the Koyukuk River, which meanders through discontinuous permafrost in the Yukon River watershed, Alaska, USA, with an average migration rate of 0.52 m yr−1. We measured sediment total OC (TOC) content, radiocarbon activity, water content, bulk density, grain size, and floodplain stratigraphy. Radiocarbon activity and TOC content were higher in samples dominated by silt as compared to sand, which we used to map OC content onto floodplain stratigraphy and estimate carbon fluxes due to river meandering. Results showed that the Koyukuk River erodes and re-deposits a substantial flux of OC each year due to its depth and high migration rate, generating a combined OC flux of a similar magnitude to the floodplain net ecological productivity. However, sediment being eroded from cutbanks and deposited as point bars had similar OC stocks (mean ± 1 SD of 125.3±13.1 kg OC m−2 in cutbanks versus 114.0±15.7 kg OC m−2 in point bars) whether or not the banks contained permafrost. We also observed radiocarbon-depleted biospheric OC in both cutbanks and permafrost-free point bars. These results indicate that a substantial fraction of aged biospheric OC that is liberated from floodplains by bank erosion is subsequently re-deposited in point bars rather than being oxidized. The process of aging, erosion, and re-deposition of floodplain organic material may be intrinsic to river–floodplain dynamics, regardless of permafrost content.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Advanced Self-Healing Polymer-Cement Composites for Geothermal Wellbore Application at 300 °C

Polymer-cement composites were formulated using two base cements and three polymers and evaluated as potential alternatives to conventional geothermal wellbore cementitious material. To mimic geothermal conditions these cement composites were cured at 300 °C and their mechanical properties, including compressive strength, Young modulus, shear bond strength to steel casing, and self-healing and re-adhering (to steel) capability were tested. To test thermal stability the samples were cured at 300 °C for up to 30 days followed by analysis of their mineralogy and chemical composition by X-ray diffraction spectroscopy (XRD), 13C NMR, and total organic carbon (TOC). These tests showed that all polymer composites formulated were thermally stable as supported by almost 100% TOC of the 300 ?C cured samples and presence of all the polymer signals in 13C NMR permeability tests performed before and after healing a longitudinal fracture base cements and polymer-cement composites gave lower (2nd/1st) permeability ratios with respect to base cements which suggests that introduction polymers result in self-healing composite materials. Curing two of the best performing polymer-cement composites for a period of 30 days at 300 °C maintained the self-healing capability. These advanced polymer-cement composites with higher mechanical stability, ductility and self-healing capability are promising alternatives to wellbore cement materials for geothermal and fossil energy applications.

polymer-cement, composite, wellbore, self-healing,↗

DOE OSTI2020

Solubility Predictions for Hanford Tank Concentrates with HSC - 20459

The commercially available Outotec HSC 9.9.0{sup R} provides excellent predictions for the solubilities of many species for Hanford waste tank concentrates. The HSC solubility predictions with a Harvie activity model agreed well with five boildowns that showed solubility limits for NaNO{sub 3}, NaNO{sub 2}, Na{sub 2}CO{sub 3}, NaF, Na{sub 2}SO{sub 4}, and Na{sub 3}PO{sub 4}. However, the HSC did not predict density and therefore water content very well and therefore we used the measured densities and derived water content from the difference between measured density and assays. Furthermore, we adjusted the HSC enthalpy for the minor species Na{sub 3}PO{sub 4}*NaF double salt in order to fit the five boildowns as well. Previous work has shown that gibbsite becomes and remains supersaturated in all of these boildowns and so there was no alumina precipitation despite supersaturation. Furthermore, an equilibrium model like HSC always shows complete oxidation of any TOC in the presence of nitrate and nitrite. We therefore suppressed the HSC oxidation of acetate and oxalate in order to fit measured acetate and oxalate solubilities as TOC. Space in Hanford waste tanks is very limited and therefore evaporator campaigns continue to recover needed tank space from dilute tank liquids. Prior to each evaporator campaign, a boildown of a sample of tank liquid for each campaign provides a basis for planning by measuring density, water activity, soluble species, and solids precipitation as a function of concentration at 18 deg. C. These boildowns then provide validations and calibrations for the HSC solubility prediction for Hanford wastes. Previous work has shown the solubilities of minor electrolytes in these five boildowns follow rather simple power law solubility products. Hanford's 222-S laboratory has reported each of five boildowns for concentrated liquids from five waste tanks and tank blends. All boildowns eventually showed the precipitation of the dominant electrolyte, NaNO{sub 3}, and overall solution activity largely drives all solubility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2026

Soil physical and chemical measurements for topsoils collected during NEON campaign in East River, CO (06/14/2018-06/28/2018)

The package is part of the DOE Watershed Function Science Focus Area (SFA) project and includes soil physical and chemical measurements from topsoils collected at the East River, Colorado, in conjunction with the National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP) survey conducted in June 2018. The soil measurements include soil bulk density, soil volumetric water content, soil microbial biomass C (Carbon), N (Nitrogen) and C:N (C to N ratio), soil DNA yield, soil total extractable organic C, soil total extractable N, soil extractable nitrate, soil extractable ammonium, soil dissolved inorganic N, soil dissolved organic N, soil pH, soil TOC400 (total organic carbon at 400°C), soil ROC (residual oxidizable carbon), soil TIC (total inorganic carbon), soil TOC (total organic carbon), soil TC (total carbon), soil N, soil OM (organic matter) loss on ignition. Additional associated site metadata can be found in the ESS-DIVE package 10.15485/1618130. The dataset includes (1) 2018_NEON_soil_physical_chemical_measurements.csv: soil physical and chemical measurements indexed by soil sample IGSNs; (2) samples.csv: sample metadata file used to register International Generic Sample Numbers (IGSNs); (3) flmd.csv: file level metadata file; and (4) dd.csv: data dictionary file. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

2018 NEON and 2025 CHESS (Catchment Hydrology and ↗

DOE OSTI2020

Paradox of sustainability in tobacco control in Thailand: A comprehensive assessment of three-decade experiences

Background: Over the past three decades of tobacco control, Thailand has gained international recognition as a middle-income country with sustained achievement of declining smoking prevalence. However, the number of key FCTC measures implementation is still far away from the highest-level implementation. As a result, we aim to explore explanatory factors for the paradoxical phenomenon of sustainability in tobacco control in Thailand, to understand what the paradox means, why it happens, and how to take further steps in minimizing the paradox. Methods: We used a mixed-method approach comprising qualitative (review of literature and documents plus Program Sustainability Assessment Tool (PSAT) guided key informant interviews) and semi-quantitative methods (PSAT scoring, Theory of change (TOC), and causal-loop diagram (CLD)) to synthesize all the findings from the qualitative data. Results: Across all eight domains, sustainability scores at the local level are lower than the national level. The highest total score was in three domains: political support, partnership, and organizational capacity. The lowest total score was for the strategic planning domain. We propose a set of key strategic elements and drivers for future strategic planning. Discussion: Using CLD, we capture a high-level view of tobacco control with dynamic interactions between contexts, mechanisms, interventions, and outcomes. Finally, we believe the deep understanding of tobacco control and the proposed strategy to counteract transnational tobacco companies in Thailand will guide future sustainable actions to reduce the prevalence of smoking, especially in the strategic planning domain that has the lowest PSAT score.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Synthesis and property of EPEG ‐based polycarboxylate ether superplasticizers via RAFT polymerization

Abstract Polycarboxylate ether superplasticizers (PCEs) with comb‐shaped molecular structures have attracted considerable attention in the area of admixtures for construction engineering. However, there are some contradictions in studying the relationship between the molecular structure and property of PCE due to its random structure based on traditional free radical polymerization, which is confused for designing and developing novel PCEs. In this article, a series of reversible addition fragmentation chain transfer (RAFT) polymerization‐based polycarboxylate ether superplasticizers (RPCs) were prepared by the copolymerization of acrylic acid (AA) and ethylene‐glycol monovinyl polyethylene glycol (EPEG). The chemical structure and composition of RPCs were characterized and their adsorption behavior and dispersion properties were conducted. The results demonstrate that the molecular weights of RPCs do not vary significantly with prolonging reaction time, and the actual monomer ratio in RPCs displays a significant change to the feed one due to the monomer reactivity and conversion at higher reaction temperature, which is different from conventional free radical polymerization. The dispersion and adsorption properties of RPCs to cement were evaluated by slurry fluidity tests and total organic carbon (TOC) experiments. The effect of polymerization temperature and time on the dispersion ability has been systematically studied. The results indicate that the dispersion ability and adsorption capacity of RPCs are closely related to their molecular structures. The dispersion ability of RPCs were enhanced with increasing carboxyl group density in a certain range of monomer molar ratios (≤6:1). This study will provide a new platform for designing and developing high‐performance and rational cost‐effective superplasticizers with well‐defined structure and controlled molecular weight.

Chen, Xiaodong↗

DOE OSTI2023

Lime slurry treatment of soils developing on abandoned coal mine spoil: Linking contaminant transport from the micrometer to pedon-scale

Historical and abandoned coal mine spoil continues to generate acid- and metal(loid)-rich porewaters and represents a geographically large and diffuse non-point source of contamination to local watersheds. A potentially inexpensive approach to treat these materials and soils developing on them is through the application of lime slurries, to neutralize acidity and encourage the (co)precipitation of metal(loids) with Fe(III)-(oxy)hydroxides, and potentially other metal-oxides and/or Ca-bearing phases. Here, the efficacy of this approach was evaluated through parallel field application and laboratory-based flow-through column experiments. The field site is Huff Run sub-watershed 25 located in Tuscarawas County, Ohio and was chosen in part because it was previously classified as one of the most highly AMD-impacted sub-watersheds in the region. Two locations with historical spoil were chosen and suction lysimeters were installed at 25 and 75 cm depth to monitor porewater composition on two sides at the base of each pile. Half of each slope received seven lime slurry treatments from June through October of 2017. A suite of aqueous (ICP-OES, IC, and TOC-L) and solid phase geochemical and mineralogical approaches (quantitative SEM-EDS and synchrotron μ-XRF) were used to determine how composition, texture, morphology, and spatial distribution of mineral coatings differ in pre- and post-lime treated soils, and how that impacts the distribution and transport of trace metal(loid)s. Mine spoil porewater at site 1 was slightly less alkaline (pH ranging from 7.04 to 7.37) than at site 2 (ranging from 7.55 to 7.71), and average electrical conductivity values at site 1 (316–405 μS cm —1 ) were slightly lower than at site 2 (358–464 μS cm —1 ), although differences between the sites were not significant. Porewater pH and electrical conductivity in all lysimeters decreased over the course of the field season but there was no obvious response to lime treatment at either site or any depth. At site 1, both treatment and depth were significant factors affecting Ca, K, Ni, SO 4 2— , and DOC concentrations while only treatment effects were significant for dissolved Al and Cu (p < 0.05). For all soils, there were no trends in metal concentration observed over time although DOC and SO 4 2— decreased over the field season. Pedon-scale changes in metal porewater concentrations in response to treatment were linked to micrometer-scale changes in mineral surface coatings; specifically, higher concentrations of Ca, Fe, Mn, and Zn were observed in the coatings and no changes were observed in Fe redox speciation, whereas total S decreased likely due to oxidation of S in coal fragments. In contrast to the field experiment, the column experiments exhibited a much greater response in effluent composition with respect to lime treatment. The untreated columns had approximately an order of magnitude more H + leached over the course of the experiment (p < 0.001) and resulted in greater Ca, Al, Cu, and DIC leached and less Mn, Zn, and SO 4 2— . Soils treated with the lime slurry in the column experiments exhibited larger and thicker secondary Fe-coatings, including the addition of Fe-sulfates. Despite clear trends in the laboratory-based column experiment where the lime-to-soil ratio was higher, the effects were either muted or undetected in the field pilot project, suggesting that a higher application rate of lime in the field is needed to achieve a similar effect. This work provides evidence that a less alkaline lime slurry could be a practical and inexpensive method of treating coal mine spoil-impacted soils and represents an important step in linking laboratory-based remediation studies to implemented field-based studies.

58 GEOSCIENCES↗

DOE OSTI2023

Using taxa-based approaches to delineate stream macroinvertebrate assemblage responses to stressor gradients in modified alluvial agroecosystems

Alluvial plain landscapes are some of the most agriculturally productive lands in the world but often have modified stream ecosystems due to cultivation history. This context requires consideration when establishing water quality management goals. We analyzed state water quality databases to demonstrate that Mississippi Alluvial Plain (MAP) ecoregion streams have elevated specific conductivity (SC) and nutrients and lower macroinvertebrate local and regional taxa pools compared to streams in other ecoregions, potentially reducing the efficacy of traditional biomonitoring approaches within the region. To overcome these challenges, we used threshold indicator taxa analysis (TITAN) to compare macroinvertebrate assemblage responses to water quality gradients among ecoregions in Mississippi. We identified individual taxa and assemblage-level responses to increasing water quality degradation in MAP streams. Observed responses occurred at higher concentrations for SC, total organic carbon (TOC) and total phosphorus (TP), but not total nitrogen (TN) relative to other ecoregions. These responses appeared to be driven by a large proportion of indicator taxa considered tolerant or unresponsive in other ecoregions, responding negatively to increasing water quality stressors in MAP streams. Our observed assemblage-level stressor responses to WQ gradients in MAP streams demonstrate shifting tolerance in highly altered ecosystems may require adjustments to recovery expectations but also provide useful measures for monitoring improvements in regional water quality. For example, our observed macroinvertebrate assemblage response to increasing TP identified a management goal similar to guidance based on distributional analysis of water quality data within the MAP ecoregion (0.11 vs 0.128 mg L –1 ) and thus provide some biological basis for previously identified nutrient goals for the region. Our approach can guide and monitor success of nutrient reduction efforts in MAP watersheds and other alluvial plain agroecosystems where reference conditions do not exist, and local and regional taxa pools are less diverse and may not support full recovery of ecological assemblages. While our results are promising, they should also be compared with more sensitive and less habitat-limited biological assemblages (e.g., algae or bacteria) to better understand complex ecological responses to best management practices designed to increase sustainability of high production agricultural regions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Microfracture-pore structure characterization and water-rock interaction in three lithofacies of the Lower Eagle Ford Formation

The microfracture-pore structures and water-rock interactions of eight samples of three typical lithofacies (three limestone, three wackestone, and two mudstone) from the Lower Eagle Ford Formation have been investigated using an integrated methodology. The methods used were X-ray diffraction (XRD), total organic carbon (TOC) content, pyrolysis, thin-section petrography, scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), spontaneous water imbibition, and water vapor & nitrogen physisorption. Petrophysical properties such as organic richness, maturity, mineral composition, types and patterns of microfractures and pores, porosity, pore-throat size distribution, pore size distribution, pore connectivity, water adsorption and desorption behavior were determined from these methods, and the results compared among the three lithofacies. For example, the three limestone EAS samples and three wackestone DM samples show a low porosity range from 2.02–3.35%, whereas the two mudstone VRU samples exhibit a much large average porosity of 11.7% by MIP results. Nitrogen physisorption results show that pore size distributions have a good similarity in N2 adsorption volume for the samples with similar lithology. Microfractures are morphologically divided into seven types, with their definitions & pictorial examples presented and possible formation mechanisms proposed. In addition, the water vapor physisorption behavior and their controlling factors are discussed. Here, the water adsorption capacity shows a positive relationship (R 2 = 0.90) with clay content and a negative relationship (R 2 = 0.99) with carbonate content. In general, this integrated study of microfracture-pore structure characterization and water-rock interaction provides some insights of water vapor adsorption behavior in different lithofacies and whether microfractures could be an important pathway for fluid flow.

58 GEOSCIENCES↗

DOE OSTI2022

Early diagenetic processes in an iron-dominated marine depositional system

The early diagenetic interplay between reactive iron, sulfur, and organic matter in the bathymetrically isolated Santa Monica Basin (SMB) sediments are investigated in this study. Here, we explore solid-phase and porewater profiles from the basin, supplemented with a transect from 71 to 907 m water depth that includes oxygenated (>60 μM O 2 ) bottom waters near the coast and oxygen-deficient waters (~4 µM O 2 ) in the basin. The geochemical data of the basin sediments are further scrutinized by means of reactive transport modeling. The results show that the basin sediments do not follow the traditional geochemical signatures of oxygen-deficient settings. A lack of dissolved sulfide accumulation and sulfurized iron persists despite the sediments being deposited under reducing conditions (without bioturbation/bioirrigation), strong organic carbon input (TOC up to 5.0 wt%), and active dissimilatory sulfate reduction. Not only did we find an exceptional enrichment in highly reactive Fe in the surface sediments (~45 % of total Fe), but the enrichment of reactive Fe, including ferrihydrite, persists downcore and coexists with high levels of dissolved Fe. The enhanced preservation of Fe oxides and lack of iron-sulfide precipitation is in part explained by detection via Mössbauer spectra of iron oxides bounded to organic matter (Fe[III]-OM coprecipitates). The modeled Fe budget shows that most of the Fe oxides in the surface sediments are internally recycled by upward diffusion and subsequent oxidation of Fe 2+ . Sulfide oxidation coupled to Fe reduction effectively precludes sulfide accumulation while enhancing build-up of dissolved Fe, fueling the Fe cycle within the first 5 cm depth. Continuous reoxidation of Fe 2+ enhances the formation of Fe(III)-OM coprecipitates, limiting the amount of reactive organic matter. In the unavailability of labile organic matter, other than within the uppermost layers, the organic-rich sediment profiles are dominated by Fe cycling that limits the production and preservation of sulfides and enhances the preservation of Fe oxides and organic carbon. Finally, this study highlights key local controls on Fe availability in marginal basins and describes an intricate biogeochemical C-Fe-S cycling in modern and possibly ancient marine systems with important implications for Fe availability in the marine realm.

58 GEOSCIENCES↗

DOE OSTI2021

Produced water softening using high-pH catholyte from brine electrolysis: reducing chemical transportation and environmental footprints

This study evaluates the benefits of using brine electrolysis for generating caustic soda (NaOH) and free chlorine for on-site produced water (PWs 1 ) treatment. A two-compartment electrochemical cell was shown to generate NaOH solutions (pH > 12, faradic efficiency 93%) and chlorine (faradic efficiency 32%) from a NaCl brine solution at a current density of 10 mA/cm2. The catholyte was used for softening field-collected PWs. The degree of Mg removal depends mostly on the catholyte/PW mixture pH with pH 11 achieving >90% removal. Ca removal is poor (<10%) due to low bicarbonate alkalinity in the PWs. Soda ash alone at a dose equivalent to the total hardness of the PWs helps CaCO3 precipitation and Ca removal (>90%). The combined treatment of the catholyte and a reduced quantity of soda ash achieves better or comparable Ca removal compared to the full stoichiometric amounts of soda ash alone. Ba and Sr removal patterns closely follow those of Ca, suggesting co-precipitation of these cations as the primary removal mechanism. Organic removal is negligible during chemical softening; however, activated carbon filtration achieves >90% of total organic carbon (TOC) removal in all PWs. A treatment scheme is proposed for field generation of caustic soda and chlorine from PW. The economic analysis demonstrates the significant cost-effectiveness of the approach compared to purchasing the NaOH.

42 ENGINEERING↗

DOE OSTI2022

Continuous electrocoagulation-membrane distillation unit for treating hydraulic fracturing produced water

Hydraulic fracturing oil and gas produced water is frequently highly impaired. While it is often deep well injected, there is great interest in treating this water for beneficial uses. Given the complexity of these produced waters, multiple unit operations are necessary. Electrocoagulation has been considered as a promising pretreatment technology. Here electrocoagulation is considered as a pretreatment prior to membrane distillation. The focus of this work is on understanding the electrocoagulation process in order to design an integrated unit operation. Electrocoagulation is used to remove organic compounds that will foul the membrane leading to membrane failure during membrane distillation. Using aluminum or iron electrodes, half-cell reactions in the electrocoagulation cell and electrode potentials have been calculated. Electrocoagulation was conducted using a continuous electrocoagulation reactor with actual produced water using aluminum, iron or mixed aluminum and iron electrodes. Here, the results obtained here indicate that electrocoagulation can obtain good removal efficiency of total organic carbon (TOC) by using different reaction conditions. Removal of organic compounds is essential to minimize fouling during membrane distillation. Further the performance of the electrocoagulation process depends strongly on the quality of the feed water. Insoluble species were more effectively coagulated than dissolved organic species. Continuous electrocoagulation shows great potential as a scalable unit operation for pretreating hydraulic fracturing produced water.

42 ENGINEERING↗

DOE OSTI2021

Factors controlling pore network development of thermally mature Early Palaeozoic mudstones from the Baltic Basin (N Poland)

Understanding the formation of pore space, especially in low porosity shales (as source rocks and as unconventional resources), is critical to the oil and gas industry, since pores control the space available for hydrocarbon and participate in hydrocarbon transport. We examined 87 Ordovician and Silurian mudstone samples collected from four wells located in the Pomeranian part of the Baltic Basin (northern Poland), one of the primary Polish targets for hydrocarbon exploration. These samples represent the Pelplin, the Paslek, the Jantar, the Prabuty, and the Sasino Formations, which still requires more detailed porosity studies. Our study aimed to identify factors controlling porosity development, by applying bulk techniques (organic petrology and TOC analyses, quantitative mineralogy, and porosimetry) as well as nano- to microscale techniques (thin section petrography, electron microscopy). The studied samples are mainly argillaceous mudstones. The results of porosimetry measurements, combined with image analysis, indicate that the pores of all studied rocks are dominated by micropores (pores < 2 nm in diameter), mesopores (2-50 nm in diameter) and small macropores. The SEM images showed three main pore types: a) voids related to clay mineral aggregates, b) pores inside organic matter particles, and c) pores between other mineral grains. In the Jantar and Sasino mudstones, the organic matter content and its thermal maturity control porosity. The occurrence of solid bitumen in the rocks from these formations reduces samples’ mesoporosity because of the pore-clogging effect. In contrast, in the Paslek and Prabuty Formations, there is low organic matter content and specific surface area and the volume of mesopores increase with clay minerals content. In the Pelplin mudstones, there are no prevailing factors controlling porosity. As a result, we suggest that a combination of SEM image analysis and dual liquid porosity (DLP) measurements is a powerful method to assess porosity available for petroleum flow in mudstones.

03 NATURAL GAS↗

DOE OSTI2025

Insights into determining pore size properties of ultrafiltration membranes

The selectivity of porous membranes is often characterized using solute rejection tests, where membranes are challenged with dilute aqueous solutions of neutral solutes at operating conditions that minimize concentration polarization and fouling. In single solute tests, a membrane is challenged with one molecular weight (MW) solute at a time from low to high MW. Since single solute methods are time-intensive, mixed solute tests have become more common, where a mixture of several MW solutes challenges a membrane at once. However, the presence of large solutes in a mixture increases the rejection of smaller solutes. Furthermore, there are no universally accepted operating conditions or standard methods used by membrane manufacturers or researchers for the experiments, leading to difficulty in pore size and pore characteristic comparisons. In this paper, commercial ultrafiltration membranes were challenged with single and mixed solute polyethylene glycol (PEG) and dextran aqueous solutions. First, rejection values determined using total organic carbon (TOC) and high-performance liquid chromatography (HPLC) from single solute filtration experiments are compared. Differences in rejection curves obtained by the two techniques are attributed to solute polydispersity. Mixed solute filtration experiments with binary mixtures of solutes showcased co-solute interactions, which increase with both the size and weight percent of large solute in the mixture. Mixed solute filtration experiments at varying operating conditions (i.e., stir speed and flux) were conducted to determine operating conditions that mitigate co-solute interactions. Stir speed had a minimal effect on co-solute interactions. In contrast, low flux conditions can help minimize co-solute interactions, leading to pore size distributions that closely resemble results observed in single solute filtration using narrowly dispersed solutes. Additionally, at low flux conditions, the predicted membrane pore size distributions utilizing mixed solute experiments with PEG and dextran were similar.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Controls on reservoir properties in organic-matter-rich shales: Insights from MICP analysis

Mercury injection capillary pressure (MICP) analysis was used to study organic-matter-rich Devonian shales varying in maturity from marginally mature to postmature to discuss controls on drainage and imbibition in shale reservoirs. Six samples come from the New Albany Shale; their total organic carbon (TOC) ranged from 3.3–8.4 % and vitrinite reflectance (R o ) from 0.54–1.42 %. One Marcellus Shale sample with R o 2.50 % was used to extend the maturity range to the advanced dry gas window. Three coal samples of varying rank were also included for comparison. Porosity of the shales ranges from 1.5–5.0 %, and MICP-derived permeability ranges from 0.17–9.9 mD. Injection capillary pressure curves have a range of entry pressures from 0.055 to0.421 MPa, and no relationship of entry pressure with maturity was revealed. Maturity, however, has an influence on pore size distribution, with the higher-maturity samples having significantly lower volumes of pores with throats less than 10 nm in diameter. Withdrawal capillary pressure curves document a wide range of withdrawal efficiencies from 55 % to almost 100 %, and pores having throats between 3–50 nm in diameter play a major role in the ability of mercury to be released from the pore system. The obtained data provide valuable information about shale properties and their behavior not only in the air-mercury system but also under reservoir conditions.

02 PETROLEUM↗