Quantification of rhenium oxide dispersion on zeolite: Effect of zeolite acidity and mesoporosity
Abstract not provided
Wu, Yiqing↗
SEARCH · Search NASA
Results for “Taylor dispersion”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Correlative STEM-APT characterization of radiation-induced segregation and precipitation of in-service BWR 304 stainless steel
In this study, radiation induced segregation and precipitation phenomena in an in-service boiling water reactor 304 stainless steel component were investigated using directly correlated 3D-atom probe tomography and scanning transmission electron microscopy. Significant quantitative differences in measured segregation at grain boundaries were found between the atom probe and energy dispersive spectroscopy measurements of the exact same locations. In particular, a much stronger Si segregation (~10 atomic% via atom probe versus ~4 atomic% via electron microscopy) and different Cr profile shapes were detected that are critical to models of radiation induced segregation and stress corrosion cracking behavior. These quantitative differences highlight the need for comparative microscopy and critical evaluation of limitations in each analytical method. Elemental segregation to dislocations and conjoined-clusters were also highlighted by atom probe; confirming and expanding upon what has been observed in test reactor neutron and accelerator-based ion irradiations.
36 MATERIALS SCIENCE↗
SALT2 versus SALT3: updated model surfaces and their impacts on type Ia supernova cosmology
ABSTRACT For the past decade, SALT2 has been the most common model used to fit Type Ia supernova (SN Ia) light curves for dark energy analyses. Recently, the SALT3 model was released, which upgraded a number of model features but has not yet been used for measurements of dark energy. Here, we evaluate the impact of switching from SALT2 to SALT3 for a SN cosmology analysis. We train SALT2 and SALT3 on an identical training sample of 1083 well-calibrated Type Ia supernovae, ensuring that any differences found come from the underlying model framework. We publicly release the results of this training (the SALT ‘surfaces’). We then run a cosmology analysis on the public Dark Energy Survey 3-Yr Supernova data sample (DES-SN3YR), and on realistic simulations of those data. We provide the first estimate of the SN + CMB systematic uncertainty arising from the choice of SALT model framework (i.e. SALT2 versus SALT3), Δw = + 0.001 ± 0.005 – a negligible effect at the current level of dark energy analyses. We also find that the updated surfaces are less sensitive to photometric calibration uncertainties than previous SALT2 surfaces, with the average spectral energy density dispersion reduced by a factor of two over optical wavelengths. This offers an opportunity to reduce the contribution of calibration errors to SN cosmology uncertainty budgets.
79 ASTRONOMY AND ASTROPHYSICS↗
Solutions of the Taylor-Green Vortex Problem Using High-Resolution Explicit Finite Difference Methods
A computational fluid dynamics code that solves the compressible Navier-Stokes equations was applied to the Taylor-Green vortex problem to examine the code s ability to accurately simulate the vortex decay and subsequent turbulence. The code, WRLES (Wave Resolving Large-Eddy Simulation), uses explicit central-differencing to compute the spatial derivatives and explicit Low Dispersion Runge-Kutta methods for the temporal discretization. The flow was first studied and characterized using Bogey & Bailley s 13-point dispersion relation preserving (DRP) scheme. The kinetic energy dissipation rate, computed both directly and from the enstrophy field, vorticity contours, and the energy spectra are examined. Results are in excellent agreement with a reference solution obtained using a spectral method and provide insight into computations of turbulent flows. In addition the following studies were performed: a comparison of 4th-, 8th-, 12th- and DRP spatial differencing schemes, the effect of the solution filtering on the results, the effect of large-eddy simulation sub-grid scale models, and the effect of high-order discretization of the viscous terms.
DeBonis, James R.↗
Measurement of the turbulence in a gaseous rocket combustion chamber
The intensity of turbulence and the Lagrangian correlation coefficient in a gaseous hydrogen (GH2)-gaseous oxygen (GOX) rocket combustion chamber are studied. A helium tracer gas was injected at an upstream point on the combustion chamber centerline. Samples collected downstream were analyzed for the spreading of the tracer gas concentration. Using Taylor's turbulent diffusion theory and Gosman's numerical method, turbulence parameters were found. In order to evaluate turbulence field inhomogeneity in the axial direction, Taylor's theory was extended. An exponential function was used to approximate the Lagrangian correlation coefficient. It was found that turbulence intensity varies from 15% near the injector to 4% at the nozzle entrance, and that the Lagrangian coefficient rapidly decreases when the dispersion time difference increases.
Tou, P. P.↗
Special Issue: To Commemorate the Legacy of Malcolm J. Andrews—Scientist, Educator, and Leader
This special issue celebrates the scientific legacy of Dr. Malcolm J. Andrews, former Editor of the ASME Journal of Fluids Engineering (2010–2018). Malcolm devoted his career to the development and applications of computational, experimental, and analytical tools to investigate and solve diverse, complex fluid dynamics, and heat transfer problems. Malcolm’s most notable research accomplishments include: (i) contributions to innovative experiments, simulations, and theory to understand buoyancydriven turbulent mixing due to Rayleigh–Taylor instability; (ii) development of the multiphase particle-in-cell method for understanding fragmentation in spray jets, coal-water slurry, and other dense particulate flows; (iii) mixing in nano- and biomaterials in applications ranging from protein glues to carbon nanotube composites; (iv) determining dispersion in proteins to improve therapeutic drug delivery via micro-encapsulation; (v) innovative methods for storing information using nanopinned dipole magnetic vortices in superconducting materials; and (vi) modeling and design modifications for shell-and-tube heat exchangers, as well as heat transfer in rotating systems such as turbine blades. The results of his research have been published in a long series of trend-setting journal and conference papers, book chapters, and patents.
42 ENGINEERING↗
Experimental segregation of iron-nickel metal, iron-sulfide, and olivine in a thermal gradient: Preliminary results
Speculation about the possible mechanisms for core formation in small asteroids raises more questions than answers. Petrologic evidence from iron meteorites, pallasites, and astronomical observations of M asteroids suggests that many small bodies were capable of core formation. Recent work by Taylor reviews the geochemical evidence and examines the possible physical/mechanical constraints on segregation processes. Taylor's evaluation suggests that extensive silicate partial melting (preferably 50 vol. percent or greater) is required before metal can segregate from the surrounding silicate and form a metal core. The arguments for large degrees of silicate partial melting are two-fold: (1) elemental trends in iron meteorites require that the metal was at is liquidus; and (2) experimental observations of metal/sulfide inclusions in partially molten silicate meteorites show that the metal/sulfide tends to form spherules in the liquid silicate due to surface tension effects. Taylor points out that for these metal spherules to sink through a silicate mush, high degrees of silicate partial melting are required to lower the silicate yield strength. Although some qualitative experimental data exists, little is actually known about the behavior of metals and liquid sulfides dispersed in silicate systems. In addition, we have been impressed with the ability of cumulative olivine to expel trapped liquid when placed in a thermal gradient. Consequently, we undertook to accomplish the following: (1) experimentally evaluate the potential for metal/sulfide/silicate segregation in a thermal gradient; and (2) obtain quantitative data of the wetting parameters of metal-sulfide melts among silicate grains.
Jurewicz, Stephen R.↗
Coccidioides undetected in soils from agricultural land and uncorrelated with time or the greater soil fungal community on undeveloped land
Coccidioidomycosis is a typically respiratory fungal disease that, in the United States, occurs primarily in Arizona and California. In California, most coccidioidomycosis cases occur in the San Joaquin Valley, a primarily agricultural region where the disease poses a risk for outdoor workers. We collected 710 soil samples and 265 settled dust samples from nine sites in the San Joaquin Valley and examined how Coccidioides detection varied by month, site, and the presence and abundance of other fungal species. We detected Coccidioides in 89 of 238 (37.4%) rodent burrow soil samples at five undeveloped sites and were unable to detect Coccidioides in any of 472 surface and subsurface soil samples at four agricultural sites. In what is the largest sampling effort undertaken on agricultural land, our results provide no evidence that agricultural soils in the San Joaquin Valley harbor Coccidioides . We found no clear association between Coccidioides and the greater soil fungal community, but we identified 19 fungal indicator species that were significantly associated with Coccidioides detection in burrows. We also did not find a seasonal pattern in Coccidioides detection in the rodent burrow soils we sampled. These findings suggest both the presence of a spore bank and that coccidioidomycosis incidence may be more strongly associated with Coccidioides dispersal than Coccidioides growth. Finally, we were able to detect Coccidioides in only five of our 265 near-surface settled dust samples, one from agricultural land, where Coccidioides was undetected in soils, and four from undeveloped land, where Coccidioides was common in the rodent burrow soils we sampled. Our ability to detect Coccidioides in few settled dust samples indicates that improved methods are likely needed moving forward, though raises questions regarding aerial dispersal in Coccidioides , whose key transmission event likely occurs over short distances in rodent burrows from soil to naïve rodent lungs.
59 BASIC BIOLOGICAL SCIENCES↗
Narrowing the Phase Distribution of Quasi-2D Perovskites for Stable Deep-Blue Electroluminescence
Solution-processed quasi-2D perovskites contain multiple quantum wells with a broad width distribution. Inhomogeneity results in the charge funneling into the smallest bandgap components, which hinders deep-blue emission and accelerates Auger recombination. Here, a synthetic strategy applied to a range of quasi-2D perovskite systems is reported, that significantly narrows the quantum well dispersity. It is shown that the phase distribution in the perovskite film is significantly narrowed with controlled, simultaneous evaporation of solvent and antisolvent. Modulation of film formation kinetics of quasi-2D perovskite enables stable deep-blue electroluminescence with a peak emission wavelength of 466 nm and a narrow linewidth of 14 nm. Light emitting diodes using the perovskite film show a maximum luminance of 280 cd m –2 at an external quantum efficiency of 0.1%. This synthetic approach will serve in producing new materials widening the color gamut of next-generation displays.
36 MATERIALS SCIENCE↗
The effect of local chemical ordering on Frank-Read source activation in a refractory multi-principal element alloy
In this work, we investigate the operation of Frank-Read (FR) sources in a refractory multi-principal element alloy (MPEA). Simulations of discrete dislocation motion in MPEAs is enabled by the development of a phase field dislocation dynamics model that treats the atomic-scale fluctuations in lattice energies across the glide plane, present due to local ordering in the chemical composition within the nominally random MPEA atomic structure. We consider, through simulation, a range of length scales over which ordering occurs, varying from short-range lengths, a few times dislocation core width, to long-range lengths, an order of magnitude longer than the core. Characteristic of this body-centered cubic MPEA, the simulations also include screw/edge character dependence in glide resistance, as informed by atomic scale simulation. The critical stresses to activate the source for the same source size are found to be statistically distributed, as a direct consequence of the underlying variation in lattice energy. Furthermore, analysis of critical state for activating edge and screw FR sources in the MPEA reveals that FR source operation occurs via a two-step mechanism, involving athermal kink-pair formation, unlike the conventional FR source operation in a material with no composition fluctuations. This mechanism lowers the average critical stress required to activate the FR source and causes the statistical dispersion in critical stress to depend on the range of composition ordering. More importantly, it leads to a more severe dependence of source strength on FR source length than predicted by line tension alone.
36 MATERIALS SCIENCE↗
Pulsar distances and the galactic distribution of free electrons
The present quantitative model for Galactic free electron distribution abandons the assumption of axisymmetry and explicitly incorporates spiral arms; their shapes and locations are derived from existing radio and optical observations of H II regions. The Gum Nebula's dispersion-measure contributions are also explicitly modeled. Adjustable quantities are calibrated by reference to three different types of data. The new model is estimated to furnish distance estimates to known pulsars that are accurate to about 25 percent.
Taylor, J. H.↗
Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy
The in-situ neutron diffraction technique, in combination with both the full-field crystal elasto-viscoplastic finite element model and microstructural characterization, was used to study the deformation-induced damage anisotropy in a commercial Al alloy, subjected to uniaxial tensile and cyclic loading. The simulations capture well the crystallographic-orientation-dependent lattice strain behavior. The hard grains, e.g. those orientated with the <111> and <422> orientations parallel with the uniaxial loading direction (LD), feature large Taylor factors and seem more prone to form damage-related band structures. Their effective elastic moduli decrease with the accumulation of damage, which are different from the soft grains orientated with the <200> orientation along the LD. Correlation between the distribution of voids and that of the residual lattice strain developed after failure may exist. The maximum tensile type residual lattice strain observed after failure may be resulted from the band structure formed in the hardest <111> grains. It was revealed that the band structure triggered by the hard particles could be one of sources of damage. In addition, while the specimen was obviously damaged, a fast stress relief was evidenced after unloading from the tension, especially at the beginning of unloading. Our present investigations provide a novel method for exploring the damage mechanisms of polycrystalline materials during plastic deformation.
36 MATERIALS SCIENCE↗
Improved analytic modeling of the linear Rayleigh–Taylor instability with plasma transport
The Rayleigh–Taylor (R–T) instability with transport effects has long been studied analytically in the neutral fluid regime. How this picture may differ in plasmas has been given less consideration, however. Leveraging previous numerical simulations with plasma viscosity and diffusion of R–T at a binary plasma interface, we show how plasma transport and kinetic effects alter the linear R–T dispersion relation. Our insight informs a much improved analytical dispersion relation, which better matches the simulation data than previously established models. Additionally, we demonstrate the importance of employing asymptotically correct viscosity coefficients in fluid codes for accurately capturing plasma R–T growth.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Evidence for dispersing 1D Majorana channels in an iron-based superconductor
The possible realization of Majorana fermions as quasiparticle excitations in condensed-matter physics has created much excitement. Most studies have focused on Majorana bound states; however, propagating Majorana states with linear dispersion have also been predicted. Here, we report scanning tunneling spectroscopic measurements of crystalline domain walls (DWs) in FeSe 0.45 Te 0.55 . We located DWs across which the lattice structure shifts by half a unit cell. These DWs have a finite, flat density of states inside the superconducting gap, which is a hallmark of linearly dispersing modes in one dimension. This signature is absent in DWs in the related superconductor, FeSe, which is not in the topological phase. Our joint data are consistent with the observation of dispersing Majorana states at a π-phase shift DW in a proximitized topological material.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Turbulence, Waves, and Taylor’s Hypothesis for Heliosheath Observations
Magnetic field fluctuations measured in the heliosheath by the Voyager spacecraft are often characterized as compressible, as indicated by a strong fluctuating component parallel to the mean magnetic field. However, the interpretation of the turbulence data faces the caveat that the standard Taylor’s hypothesis is invalid because the solar wind flow velocity in the heliosheath becomes subsonic and slower than the fast magnetosonic speed, given the contributions from hot pickup ions (PUIs) in the heliosheath. We attempt to overcome this caveat by introducing a 4D frequency-wavenumber spectral modeling of turbulence, which is essentially a decomposition of different wave modes following their respective dispersion relations. Isotropic Alfvén and fast mode turbulence are considered to represent the heliosheath fluctuations. We also include two dispersive fast wave modes derived from a three-fluid theory. We find that (1) magnetic fluctuations in the inner heliosheath are less compressible than previously thought, an isotropic turbulence spectral model with about 25% in compressible fluctuation power is consistent with the observed magnetic compressibility in the heliosheath; (2) the hot PUI component and the relatively cold solar wind ions induce two dispersive fast magnetosonic wave branches in the perpendicular propagation limit, PUI fast wave may account for the spectral bump near the proton gyrofrequency in the observable spectrum; (3) it is possible that the turbulence wavenumber spectrum is not Kolmogorov-like although the observed frequency spectrum has a −5/3 power-law index, depending on the partitioning of power among the various wave modes, and this partitioning may change with wavenumber.
79 ASTRONOMY AND ASTROPHYSICS↗
The Parallax of Pulsar 0950+08 and the Local Free Electron Density
A parallax of 7.9 + or - 0.8 mas for PSR 0950+08, corresponding to a distance of 130 + or - 15 pc is reported. The measured pulse dispersion of this pulsar implies an average free electron density of 0.023 + or 0.002/cu cm along the line of sight. This parallax measurement is subject to systematic errors and questions of interpretation which are not yet fully explored.
Gwinn, C. R.↗
LDEF SP-HVDE (Space Plasma-High Voltage Drainage Experiment) post-flight results: Leakage current and discharge
TRW designed and fabricated two identical SP-HVDE trays which were flown in the NASA LDEF (Long Duration Exposure Facility) for 5.75 years in the LEO (low earth orbit) environment. One tray was placed near the leading edge and one near the trailing edge, and investigations were performed to compare the environmental interactions on the dielectric samples of the two trays. Each tray consisted of six assemblies with Kapton dielectric samples of varying thicknesses (i.e., 2 mils, 3 mil, and 5 mils) biased under +/- 300 V, +/- 500 V, and +/- 1000 V. The original objective was successfully achieved by measuring the first in-flight average leakage current through the samples. Less than 5 percent of the post-flight coulometers behaved anomalously. The data should be valuable to the design and evaluation of spacecraft with high voltage systems. M/D (micrometeoroid and debris) impacts over the dielectric samples were examined using a SEM (Scanning Electron Microscope) and an EDS (Energy Dispersive x-ray Spectrometer). These impact sites were sprayed by silver which were most likely caused either by the impact or a 'local ESD' (electrostatic discharge).
Yaung, J. Y.↗
Different higher order kinematics between star-forming and quiescent galaxies based on the SAMI, MAGPI, and LEGA-C surveys
We present the first statistical study of spatially integrated non-Gaussian stellar kinematics spanning 7 Gyr in cosmic time. We use deep, rest-frame optical spectroscopy of massive galaxies (stellar mass $M_\star \gt 10^{10.5} \, \mathrm{M_\odot }$) at redshifts z = 0.05, 0.3, and 0.8 from the SAMI, MAGPI, and LEGA-C surveys, to measure the excess kurtosis h 4 of the stellar velocity distribution, the latter parametrized as a Gauss–Hermite series. We find that at all redshifts where we have large enough samples, h 4 anticorrelates with the ratio between rotation and dispersion, highlighting the physical connection between these two kinematic observables. In addition, and independently from the anticorrelation with rotation-to-dispersion ratio, we also find a correlation between h 4 and M ⋆ , potentially connected to the assembly history of galaxies. In contrast, after controlling for mass, we find no evidence of independent correlation between h 4 and aperture velocity dispersion or galaxy size. These results hold for both star-forming and quiescent galaxies. For quiescent galaxies, h 4 also correlates with projected shape, even after controlling for the rotation-to-dispersion ratio. At any given redshift, star-forming galaxies have lower h 4 compared to quiescent galaxies, highlighting the link between kinematic structure and star-forming activity.
79 ASTRONOMY AND ASTROPHYSICS↗