Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tech transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Technology Drives Exploration: How NASA Is Embracing Additive Manufacturing

NASA has over 60 years of technology development that enabled human space and space science exploration “for the benefit of all humankind”. This presentation will start with the overview of NASA’s organization structure; the roles NASA’s leadership plays as well as 10 regional centers’ focused areas and capabilities. It will also highlight NASA’s Mission Directorates –Science, Human, Aeronautics, and Technology. With the onset of the newer and still evolving procurement business model (NASA being a buyer, instead of maker), a question remains: which is the right framework under which NASA can best integrate the capabilities of commercial, international, and other US government entities into a coherent exploration strategy? Another critical consideration is identifying which critical technologies to invest in NASA and which capabilities are better suited for commercialization as NASA as a buyer. Additive Manufacturing (AM) is certainly changing the space industry and providing new opportunities to travel to low earth orbit and explore our universe. New design opportunities –not previously possible –for new high performance metal alloys, light-weighting, managing thermal, structural, and dynamic loads are being enabled by AM. This presentation will showcase the vast portfolio of NASA’s AM activities in the last 13 years; transportation from Earth to Destination, Habitat at Destination, Lander from Station to Surface, and Science mission spacecrafts. NASA’s technical excellence is being leveraged heavily in the AM and Commercial Space community through collaborative projects, partnership agreements, tech transfer program. Examples of challenges of AM implementation as well as opportunities will be discussed.

Alison Park↗
NASA NTRS2018

Airspace Technology Demonstration 3 (ATD-3) Traffic Aware Strategic Aircrew Requests (TASAR) Technology Transfer Document Summary Version 1.0

This summary document and accompanying technology artifacts satisfy the fourth of five Research Transition Products (RTPs) defined in the Applied Traffic Flow Management (ATFM) Research Transition Team (RTT) Plan. This transfer consists of NASA's Traffic Aware Strategic Aircrew Requests (TASAR). NASA's concept of TASAR offers onboard automation for the purpose of advising the pilot of traffic-compatible trajectory changes that would be beneficial to the flight.

tech transfer↗
NASA NTRS2021

Airspace Technology Demonstration 2 (ATD-2): Integrated Arrival/ Departure/Surface (IADS) System Demonstration - Technology Transfer Document Summary (ReadMe)Version 3 (Final Phase 3 Metroplex IADS)

Airspace Technology Demonstration – 2 (ATD-2) is part of NASA’s Airspace Technology Demonstrations (ATD) Project under its Airspace Operations and Safety Program (AOSP). ATD-2 is a multi-year research and development effort to improve the predictability and operational efficiency of the air traffic system in metroplex environments while maintaining or improving throughput by enhancing and integrating arrival, departure, and surface prediction, scheduling, and management systems. In order to ensure that the products of this knowledge and technology transfer are relevant and useful, NASA has created strong partnerships with the FAA and industry stakeholders. This summary document and accompanying artifacts satisfy the final delivery of research transition products (RTPs) defined in the IADS research transition team (RTT) plan.

ATD-2↗
NASA NTRS2018

Airspace Technology Demonstration 3 (ATD-3): Dynamic Weather Routes (DWR) Technology Transfer Document Summary Version 2.0

This summary document and accompanying technology artifacts satisfy the first of three Research Transition Products (RTPs) defined in the Applied Traffic Flow Management (ATFM) Research Transition Team (RTT) Plan. The original transfer, completed in September 2016, consisted of NASA's legacy Dynamic Weather Routes (DWR) work for efficient routing for en-route weather avoidance. This transfer updates the Concept of Operations document to a publicly-available NASA Technical Memorandum. Dynamic Weather Routes (DWR) is a ground-based trajectory automation system that continuously and automatically analyzes active in-flight aircraft in en route airspace to identify opportunities for simple corrections to flight plan routes that can save significant flying time, at least five minutes wind-corrected, while avoiding weather and considering traffic conflicts, airspace sector congestion, special use airspace, and FAA routing restrictions.

DWR↗
NASA NTRS2017

Airspace Technology Demonstration 3 (ATD-3): Multi-Flight Common Route (MFCR) Technology Transfer Document Summary Version 1.0

This summary document and accompanying technology artifacts satisfy the second of three Research Transition Products (RTPs) defined in the ATD-3 Applied Traffic Flow Management (ATFM) Research Transition Team (RTT) Plan. This transfer consists of NASA's Multi-Flight Common Route (MFCR) research for efficient route corrections for en-route weather avoidance. The MFCR concept builds on the experience of the legacy Dynamic Weather Routes (DWR) and focuses on a better balance of potential savings with ATC acceptability, common route corrections options for multiple flights on similar routings, and better use of existing and/or modern automation for communication and coordination of route change options. All of these capabilities are expected to improve system performance significantly in terms of actual delay-reducing clearances issued to flights compared to that of the DWR tool and operating concept.

tech transfer↗
NASA NTRS2018

On-Time Performance ASPM Non-Parametric Statistical Analysis

The purpose of this analysis is to provide a data-driven examination of two selected flight metrics, i.e., (1) total taxi-out time and (2) actual off time minus scheduled off block time. More specifically, Aviation System Performance Metrics (ASPM) data were analyzed to determine any possible differences in CLT (Charlotte Douglas International Airport) departure flights on these two metrics when comparing pre-IADS (Integrated Arrival, Departure, and Surface Operations) against post-IADS metering operations. This was originally presented to the ATD-2 (Airspace Technology Demonstration-2) Analytics team in August 2018.

tech transfer↗
NASA NTRS2018

Taxi Time Comparison Before and After Surface Metering Using ASPM Data

In this taxi time analysis, the ASPM data before and after surface metering were compared to see the effects of surface metering on taxi-out/in times. Results show that the surface metering from ATD-2 technologies did no harm in taxi-out times at CLT. This was originally presented to the ATD-2 Analytics team in April 2018.

ATD-2↗
NASA NTRSDate not supplied

Gateway Power Quality Lessons Learned

Power Quality is a physical description of the electrical characteristics that allow the system to function properly without significant loss of performance or life. This physical description includes steady state voltage limits, transient voltage limits in normal/abnormal conditions, ripple voltage, stability, fault conditions, and more. All which are vital for improving reliability, ensuring stable operation, defining proper fault recovery, and ensuring a ‘plug and play’ approach to design and integration. Typically, a specification for Power Quality is created based on expected system performance or an existing standard, such as the International Space Power System Interoperability Standards (ISPSIS). One example of such a specification is the Gateway Power Quality Specification. It defines the requirements and characteristics of the 120 Volt direct current electrical power system for the Gateway Electrical Power System (EPS) and the Gateway Electrical Power Consuming Equipment (EPCE). This specification also maintains a separate requirement verification section that defines test methods for requirement verification. The test methods include analysis, test, inspection, and demonstration. These test methodologies and requirements are used to ensure that the loads operate when connected to the specified power quality and performance as defined by this specification. The challenge with developing a specification is that desired system characteristics are not always fully matured before the specification is needed and many performance requirements may be application specific. This drives the need to utilize lessons learned through extensive analysis and testing as well as historical knowledge to finalize requirements. Some example requirements where this is important are Small and Large Signal Stability, Ripple Voltage, Inrush/Surge Currents, and Fault Containment. Lessons learned are also important in the testing, analysis, and verification to ensure consistent and accurate results to verify performance. This presentation will cover the lessons learned for power quality relative to ripple, inrush/surge, fault containment, testing/verification, and more.

Power Quality↗
NASA NTRS1973

Program for transfer research and impact studies

Research activities conducted under the program for Transfer Research and impact studies are reviewed. Programs include: Tech Brief - Technical Support Package (TSP) Program; transfer documentation; and technology transfer profiles. An analysis of user behavior patterns is made by studying questionnaires filled out by users of the Tech Brief - TSP program. The process of technology transfer is discussed in terms of improving its effectiveness.

Rusnak, J.↗
NASA NTRS1996

Observations and Analysis of Atmospheric Hydroxyl

Ground-based measurements of sunlight absorption at the OH P(sub 1)(l) resonance line at 308 nm have been made on a continuous basis at Fritz Peak, Colorado. The derived OH vertical column abundances show the persistence of a new seasonal regime which began in 1991. The fall minimum has been consistently depressed about 10-15% below the 1980-1990 average fall values. While the initial onset of depressed fall abundances occurred a few months after the Pinatubo eruption, there has been no fall OH recovery correlating with decreased amounts of volcanic aerosol found since spring 1993. The Colorado data also continues to exhibit an AM-PM asymmetry which varies seasonally, approximately in phase with local total ozone. These observations were presented at the Front Range AGU meeting in February 1996 and were published in Geophysical Research Letters in July 1996 (preprint enclosed). An update through the fall of 1996, when morning abundances were found to be extremely low, was presented at the Fall 1996 AGU meeting (abstract attached). A PEPSIOS instrument of identical design is currently operational and has been used since April 1996 for OH column measurements at New Mexico Tech, Socorro, NM. Title for both instruments was transferred from Florida Atlantic University to New Mexico Tech in February of 1996. Comparative measurements from the two instruments for April-July 1996 indicate small differences in OH column abundances, with New Mexico (34 deg N) abundances about 10% above Colorado (40 deg N) values for comparable solar zenith angles. A more detailed comparison will require at least one full year of data from both locations. New Mexico measurements were obtained on June 10, 1996, concurrently with a balloon launch of the NASA STRAT mission from Fort Sumner, New Mexico. We hope to make use of STRAT measurements H2O, CH4, and O3 which are particularly relevant to OH photochemistry. Additional work at New Mexico Tech involves a comparison of P(sub 1)(1) and Q(sub 1)(3) absorption by the method of Doppler shift of solar limb spectra. These are being used to infer path weighted temperatures and for validations studies on the standard method of analysis using the single P(sub 1)(1) line. Results were presented at the Fall 1996 AGU meeting (abstract attached). A graduate student in the Physics Department at New Mexico Tech has been supported since August 1996. The student is investigating column OH behavior using the NCAR 2-D model of the middle atmosphere. Graduate student support was not available until the start of the second year (Nov. 15, 1996), therefore funds have been transferred from the allocation for the research associate, who resigned from the project July 1, 1996.

Minschwaner, Ken R.↗
NASA NTRS1974

Bringing space technology down to earth

The direct transfer of space technology to terrestial applications is demonstrated by the use of fuel cells to augment existing electric power-generation facilities. The role of NASA's Technology Utilization Program is discussed in regard to indirect transfer of technology. The Tech Brief program for identifying and reporting innovations, the regional dissemination centers, and the Applications Teams working with other government agencies and the medical community are described. Projects discussed include the development of a lightweight breathing apparatus for firemen, a practical method for separating nonferrous metals from automobile scrap, and a rechargeable heart pacemaker.

Gray, E. Z.↗
NASA NTRS1994

NASA tech brief evaluations

A major step in transferring technology is to disseminate information about new developments to the appropriate sector(s). A useful vehicle for transferring technology from the government sector to industry has been demonstrated with the use of periodical and journal announcements to highlight technological achievements which may meet the needs of industries other than the one who developed the innovation. To meet this end, NASA has very successfully pursued the goal of identifying technical innovations through the national circulation publication; NASA Tech Briefs. At one time the Technology Utilization Offices of the various centers coordinated the selection of appropriate technologies through a common channel. In recent years, each NASA field center has undertaken the task of evaluating submittals for Tech Brief publication independently of the others. The University of Alabama in Huntsville was selected to assist MSFC in evaluating technology developed under the various programs managed by the NASA center for publication in the NASA Tech Briefs journal. The primary motivation for the NASA Tech Briefs publication is to bring to the attention of industry the various NASA technologies which, in general, have been developed for a specific aerospace requirement, but has application in other areas. Since there are a number of applications outside of NASA that can benefit from innovative concepts developed within the MSPC programs, the ability to transfer technology to other sectors is very high. In most cases, the innovator(s) are not always knowledgeable about other industries which might potentially benefit from their innovation. The evaluation process can therefore contribute to the list of potential users through a knowledgeable evaluator.

Workman, Gary L.↗
NASA NTRS1972

Program for transfer research and impact studies

The progress made in achieving TRIS research objectives during the first six months of 1972 is reviewed. The Tech Brief-Technical Support Package Program and technology transfer profiles are presented along with summaries of technology transfer in nondestructive testing, and visual display systems.

Kottenstette, J. P.↗
NASA NTRS2012

Modeling of Heat Transfer and Ablation of Refractory Material Due to Rocket Plume Impingement

CR Tech's Thermal Desktop-SINDA/FLUINT software was used in the thermal analysis of a flame deflector design for Launch Complex 39B at Kennedy Space Center, Florida. The analysis of the flame deflector takes into account heat transfer due to plume impingement from expected vehicles to be launched at KSC. The heat flux from the plume was computed using computational fluid dynamics provided by Ames Research Center in Moffet Field, California. The results from the CFD solutions were mapped onto a 3-D Thermal Desktop model of the flame deflector using the boundary condition mapping capabilities in Thermal Desktop. The ablation subroutine in SINDA/FLUINT was then used to model the ablation of the refractory material.

Harris, Michael F.↗