Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature inhomogeneities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ultrawide bandgap vertical β-(Al x Ga1 −x )2O3 Schottky barrier diodes on free-standing β-Ga2O3 substrates

Ultrawide bandgap β-(AlxGa1−x)2O3 vertical Schottky barrier diodes on (010) β-Ga2O3 substrates are demonstrated. The β-(AlxGa1−x)2O3 epilayer has an Al composition of 21% and a nominal Si doping of 2 × 1017 cm−3 grown by molecular beam epitaxy. Pt/Ti/Au has been employed as the top Schottky contact, whereas Ti/Au has been utilized as the bottom Ohmic contact. The fabricated devices show excellent rectification with a high on/off ratio of ∼109, a turn-on voltage of 1.5 V, and an on-resistance of 3.4 mΩ cm2. Temperature-dependent forward current-voltage characteristics show effective Schottky barrier height varied from 0.91 to 1.18 eV while the ideality factor from 1.8 to 1.1 with increasing temperatures, which is ascribed to the inhomogeneity of the metal/semiconductor interface. The Schottky barrier height was considered a Gaussian distribution of potential, where the extracted mean barrier height and a standard deviation at zero bias were 1.81 and 0.18 eV, respectively. A comprehensive analysis of the device leakage was performed to identify possible leakage mechanisms by studying temperature-dependent reverse current-voltage characteristics. At reverse bias, due to the large Schottky barrier height, the contributions from thermionic emission and thermionic field emission are negligible. By fitting reverse leakage currents at different temperatures, it was identified that Poole–Frenkel emission and trap-assisted tunneling are the main leakage mechanisms at high- and low-temperature regimes, respectively. Electrons can tunnel through the Schottky barrier assisted by traps at low temperatures, while they can escape these traps at high temperatures and be transported under high electric fields. This work can serve as an important reference for the future development of ultrawide bandgap β-(AlxGa1−x)2O3 power electronics, RF electronics, and ultraviolet photonics.

Materials Science↗
DOE OSTI2026

Stabilizing homogeneous CaMn6Sn6via oscillatory crystal growth: structural complexity in a kagome metal

CaMn6Sn6 is a member of the large family of Mn-based kagome metals derived by filling voids of the prototypical CoSn structure. We observed Ca-deficiency and structural complexity, with approximately 10% deficiency of calcium relative to the ideal 166 stoichiometry. These features are common in related Ca-based materials. We find that growth conditions stabilize different phases with varying Curie temperatures. Diffraction and magnetization measurements reveal that conventional growth profiles yield inhomogeneity both within and between crystals in a given batch, whereas an oscillatory temperature profile promotes homogeneous crystals that adopt a superstructure beyond the parent hexagonal structure type. We present the physical properties of crystals grown using the oscillatory approach. The crystals are highly conductive, with a c-axis residual resistivity ratio ρ(300 K)/ρ(2 K) exceeding 100 and a positive, linear magnetoresistance at base temperature. Magnetically, the crystals are quite similar to MgMn6Sn6, with easy-plane ferromagnetic behavior and a Curie temperature of TC ≈ 237 K. These results highlight the critical role of growth conditions in stabilizing homogeneous crystals of complex phases such as Ca0.9Mn6Sn6. The oscillatory growth approach provides an effective route for accessing the intrinsic properties of this complex material and may be broadly useful for the growth of related kagome systems.

May, Andrew [ORNL] (ORCID:0000000307778539)↗
DOE OSTI2022

Temperature-dependent charge barrier height of amorphous germanium contact detector

The exploration of germanium (Ge) detectors with amorphous Ge (a-Ge) contacts has drawn attention to the searches for rare-event physics such as dark matter and neutrinoless double-beta decay. The charge barrier height (CBH) of the a-Ge contacts deposited on the detector surface is crucial to suppress the leakage current of the detector in order to achieve a low-energy detection threshold and high-energy resolution. The temperature-dependent CBH of a-Ge contacts for three Ge detectors is analyzed to study the bulk leakage current (BLC) characteristics. The detectors were fabricated at the University of South Dakota using homegrown crystals. The CBH is determined from the BLC when the detectors are operated in the reverse bias mode with a guard-ring structure, which separates the BLC from the surface leakage current (SLC). Here the results show that CBH is temperature dependent. The direct relation of the CBH variation to temperature is related to the barrier inhomogeneities created on the interface of a-Ge and crystalline Ge. The inhomogeneities that occur at the interface were analyzed using the Gaussian distribution model for three detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Spin-Dependent Thermoelectric Power of Nanoislands

The Seebeck effect explains the generation of electric voltage as a result of a temperature gradient. Its efficiency, defined as the ratio of the generated electric voltage to the temperature difference, is sensitive to local inhomogeneities that alter the scattering rate and the density of the conduction electrons. Spin-polarized Seebeck tunneling generates a distinct thermovoltage in spin-up and spin-down charge transport channels, which, as a key to spin caloritronics, focuses on transport phenomena related to spin and heat. Here, we report spatially resolved measurement of the spin-dependent thermovoltage in a tunneling junction formed by ferromagnetic Co nanoislands and a Ni tip using spin-dependent scanning tunneling thermovoltage microscopy (SP-STVthM). We resolve the nanoscale thermoelectric powers with respect to spin polarization, nanoisland size, stacking order of Co layers on a Cu substrate, and local sample heterogeneities. The observed thermally generated spin voltages are supported by first-principles and model calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Frequency reproducibility of solid-state thorium-229 nuclear clocks

Solid-state thorium-229 ( 229 Th) nuclear clocks are set to provide new opportunities for precision metrology and fundamental physics. Taking advantage of inherent low sensitivity of a nuclear transition to its environment, orders of magnitude more emitters can be hosted in a solid-state crystal compared with current optical lattice atomic clocks. Furthermore, solid-state systems needing only simple thermal control are key to the development of field-deployable compact clocks. Here we explore and characterize the frequency reproducibility of the 229 Th:CaF 2 nuclear clock transition, a key performance metric for all clocks. We measure the transition linewidth and centre frequency as a function of the doping concentration, temperature and time. We report the concentration-dependent inhomogeneous linewidth of the nuclear transition, limited by the intrinsic host crystal properties. We determine an optimal working temperature for the 229 Th:CaF 2 nuclear clock at 196(5) K, at which the first-order thermal sensitivity vanishes. This would enable in situ temperature co-sensing using different quadrupole-split lines, reducing the temperature-induced systematic shift below the 10 −18 fractional frequency uncertainty level. At 195 K, the reproducibility of the nuclear transition frequency is 220 Hz (fractionally 1.1 × 10 −13 ) for two differently doped 229 Th:CaF 2 crystals over 7 months. Furthermore, these results form the foundation for understanding, controlling and harnessing the coherent nuclear excitation of 229 Th in solid-state hosts and for their applications in constraining temporal variations of fundamental constants.

Atomic and molecular physics↗
DOE OSTI2020

Amorphous nonstoichiometric oxides with tunable room-temperature ferromagnetism and electrical transport

Material functionalities strongly depend on the stoichiometry, crystal structure, and homogeneity. Here we demonstrate an approach of amorphous nonstoichiometric inhomogeneous oxides to realize tunable ferromagnetism and electrical transport at room temperature. In order to verify the origin of the ferromagnetism, we employed a series of structural, chemical, and electronic state characterizations. Combined with electron microscopy and transport measurements, synchrotron-based grazing incident wide angle X-ray scattering, soft X-ray absorption and circular dichroism clearly reveal that the room-temperature ferromagnetism originates from the In 0.23 Co 0.77 O 1-v amorphous phase with a large tunable range of oxygen vacancies. The room-temperature ferromagnetism is tunable from a high saturation magnetization of 500 emu cm -3 to below 25 emu cm -3 , with the evolving electrical resistivity from 5 × 10 3 μΩ cm to above 2.5 × 10 5 μΩ cm. Inhomogeneous nano-crystallization emerges with decreasing oxygen vacancies, driving the system towards non-ferromagnetism and insulating regime. Our work unfolds the novel functionalities of amorphous nonstoichiometric inhomogeneous oxides, which opens up new opportunities for developing spintronic materials with superior magnetic and transport properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Deposition-controlled phase separation in CuNb metallic alloys

Vapor co-deposited metal nanocomposites with immiscible components have shown to have several superior properties including mechanical performance, radiation tolerance, and enhanced functionalities. The morphology and structural design of these nanocomposites are important in determining the expression of these properties. The conditions used to deposit thin film nanocomposites are the governing factors in determining the final nanostructure. In this work, we link the effects of process gas pressure, substrate temperature, and sputtering target power on resultant Cu/Nb thin film nanostructures. Here, we find that for films with equiatomic phase fractions of Cu and Nb, inhomogeneous precipitate segregation dominated the structure at lower substrate temperature depositions while higher temperatures distributed the Cu and Nb phases more uniformly. Increasing process gas pressure during deposition lead to a spatially homogeneous, nanocrystalline structure of Cu/Nb. In situ annealing of this sample shows that the phase separated morphology of the two immiscible materials depends on the initial composition. Finally, compositions of Cu and Nb that were highly disparate lead to interface segregation of the minority phase. The morphological evolution observed in the Cu/Nb system is compatible with modified structural zone models for immiscible thin film systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effects of elevated temperature exposure on the residual stress state and microstructure of PVD Cr coatings on SiC investigated via in situ X-ray diffraction and transmission electron microscopy

Pure Cr coatings are being considered as corrosion-resistant layers for SiC-SiC f composite fuel cladding in light water reactors. The residual stress state and interdiffusion behavior of Cr coatings deposited on SiC substrates using bipolar high-power impulse magnetron sputtering (B-HiPIMS) and direct current impulse magnetron sputtering (DCMS) were studied using in situ X-ray diffraction experiments at 300 °C, 700 °C, and 1200 °C. After elevated temperature exposure, evolution of the coating microstructure and coating/substrate interdiffusion was characterized by transmission electron microscopy. The compressive residual stress of the dense B-HiPIMS coating at room temperature was gradually relieved at 300 °C, while the stress transitioned to a tensile state at 700 °C. Grain growth of the Cr coating and a Cr–SiC interdiffusion layer consisting of newly formed Cr–C and Cr–Si phases were observed in the B-HiPIMS coating after exposure at 700 °C. The phases in the interdiffusion layer were identified to be Cr 7 C 3 , Cr 3 Si, and Cr 5 Si 3 C x experimentally and by thermodynamic predictions. For the DCMS coating, however, changes in residual stress and microstructure at the elevated temperatures were limited by the inherent porosity and inhomogeneous structure of the as-deposited coating. At 1200 °C, both coating types interacted rapidly with the underlying SiC substrate in the early stages of the experiment. The results from this study suggest that the characteristics of the Cr coatings do not significantly change at the reactor operating temperature of 300 °C, while changes in microstructure and stress state are expected in off-normal conditions of 700 °C and 1200 °C. Finally the results from this study suggest the B-HiPIMS coating is best-suited as a protective coating for SiC fuel cladding.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Characterization of multi-regime reaction zones in a piloted inhomogeneous jet flame with local extinction

In this study, gradient free regime identification (GFRI) is applied to 1D Raman/Rayleigh/LIF measurements of temperature and major species from the intermediate velocity case of the Sydney piloted inhomogeneous jet flame series to better understand the structure of reaction zones and the downstream evolution of multi-regime characteristics. The GFRI approach allows local reaction zones to be detected and characterized as premixed, dominantly premixed, multi-regime, dominantly non-premixed, or non-premixed flame structures, based on flame markers (mixture fraction, chemical mode, and heat release rate) derived from the experimental data. The statistics of chemical mode zero-crossings, which mark premixed reaction zones, and the relative populations of flame structures are shown to be sensitive to the state of mixing in the near field of the flame and to the level of local extinction farther downstream. Multi-regime structures, where premixed and non-premixed reaction zones occur in close proximity and both contribute to overall heat release, account for nearly half the total population at streamwise locations within the first several jet diameters. There is a rapid transition within the near field whereby the relative population of non-premixed and dominantly non-premixed structures grows from 0.05 to nearly 0.5, and the population of premixed and dominantly premixed structures decreases correspondingly as fluid entering the reaction zone becomes progressively fuel-rich. Local extinction and re-ignition bring a resurgence in premixed-type structures, many of which occur at fuel-lean conditions. There are also modest populations of multi-regime structures, having chemical mode zero-crossings at lean conditions, which would not exist in a fully burning jet flame.

42 ENGINEERING↗
DOE OSTI2021

Cell dynamics simulations of coupled charge and magnetic phase transformation in correlated oxides

In this work, we present a comprehensive numerical study on the kinetics of phase transition that is characterized by two nonconserved scalar order parameters coupled by a special linear-quadratic interaction. This particular Ginzburg-Landau theory has been proposed to describe the coupled charge and magnetic transition in nickelates and the collinear stripe phase in cuprates. The inhomogeneous state of such systems at low temperatures consists of magnetic domains separated by quasimetallic domain walls where the charge order is reduced. By performing large-scale cell dynamics simulations, we find a two-stage phase-ordering process in which a short period of independent evolution of the two order parameters is followed by a correlated coarsening process. The long-time growth and coarsening of magnetic domains is shown to follow the Allen-Cahn power law. We further show that the nucleation-and-growth dynamics during phase transformation to the ordered states is well described by the Kolmogorov-Johnson-Mehl-Avrami theory in two dimensions. On the other hand, the presence of quasimetallic magnetic domain walls in the ordered states gives rise to a very different kinetics for transformation to the high-temperature paramagnetic phase. In this scenario, the phase transformation is initiated by the decay of magnetic domain walls into two insulator-metal boundaries, which subsequently move away from each other. Implications of our findings to recent nano-imaging experiments on nickelates are also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Cluster spin glass correlations and dynamics in Zn 0.5⁢ Mn 0.5⁢ Te

Here, we present a combined magnetometry, muon spin-relaxation (𝜇⁢SR), and neutron-scattering study of the insulating spin glass Zn 0.5 ⁢Mn 0.5 ⁢Te, for which magnetic Mn 2+ and nonmagnetic Zn 2+ ions are randomly distributed on a face-centered cubic lattice. The magnetometry and 𝜇⁢SR results confirm a spin freezing transition around 𝑇 𝑓 ≈ 23 K, with the spin-fluctuation rate decreasing gradually and somewhat inhomogeneously through the sample volume as the temperature decreases toward 𝑇 𝑓 . Characteristic spin-correlation times well above 𝑇 𝑓 are on the order of 10 −10 s, much slower than typically observed in canonical spin glasses but in line with expectations for a cluster spin glass. Using magnetic pair distribution function (mPDF) analysis and reverse Monte Carlo (RMC) modeling of the magnetic diffuse neutron-scattering data, we show that the spin-glass ground state consists of clusters of spins exhibiting short-range-ordered type-III antiferromagnetic correlations with a locally ordered moment of 3.1⁢(1)⁢𝜇 B between nearest-neighbor spins. The type-III correlations decay exponentially as a function of spin separation distance with a correlation length of approximately 5 Å. The diffuse magnetic scattering and corresponding mPDF show no significant changes across 𝑇 𝑓 , indicating that the dynamically fluctuating short-range spin correlations in the paramagnetic state retain the same basic type-III configuration that characterizes the spin-glass state; the only change apparent from the neutron-scattering data is a gradual reduction of the correlation length and locally ordered moment with increasing temperature. Taken together, these results paint a unique and detailed picture of the local magnetic structure and dynamics in Zn 0.5 ⁢Mn 0.5⁢ Te and provide strong evidence that this material is best described as a cluster spin glass. In addition, this work showcases a statistical method for extracting diffuse scattering signals from neutron powder diffraction data, which we developed to facilitate the mPDF and RMC analysis of the neutron data. This method has the potential to be broadly useful for neutron powder diffraction experiments on a variety of materials with short-range atomic or magnetic order.

magnetism↗
DOE OSTI2022

Effect of substrate temperature on sputter-deposited boron carbide films

Sputter deposition of B4C films with tailored physical properties remains a challenge. Here, we systematically study how substrate temperature influences the properties of B4C films deposited by direct current magnetron sputtering onto planar substrates held at temperatures in the range of 100-510°C. Results show that all films are amorphous stoichiometric B4C, with low O content of ~1 at. %. Films deposited onto substrates at 100°C exhibit high compressive residual stress and decreased mechanical properties. Therefore, for elevated substrate temperatures in the range of 180-510°C, film mass density, surface roughness, Young’s modulus, and hardness are weakly dependent on substrate temperature. However, in this temperature range, an increase in substrate temperature leads to larger residual compressive stress accompanied by a corresponding reduction in the concentration of nanoscale inhomogeneities. At least for the landing atom ballistics conditions studied here, a substrate temperature range of ~185-250°C is optimum for growing films with near-zero intrinsic residual stress. The overall weak substrate temperature dependence of film properties revealed in this work is favorable for the development of a robust deposition process, particularly for the case of deposition onto non-planar substrates where temperature control is often challenging.

36 MATERIALS SCIENCE↗
DOE OSTI2024

AmeriFlux Measurement Component Instrument Handbook

An AMC system was installed at the Atmospheric Radiation Measurement (ARM) Climate Research Facility’s North Slope Alaska (NSA) Barrow site, also known as NSA C1 at the ARM Data Archive, in August 2012. A second AMC system was installed at the third ARM Mobile Facility deployment at Oliktok Point, also known as NSA M1. This in situ system consists of 12 combination soil temperature and volumetric water content (VWC) reflectometers and one set of upwelling and downwelling PAR sensors, all deployed within the fetch of the Eddy Correlation Flux Measurement System. Soil temperature and VWC sensors placed at two depths (10 and 30 cm below the vegetation layer) at six locations (or microsites) allow soil property inhomogeneity to be monitored across a landscape. The soil VWC and temperature sensors used at NSA C1 are the Campbell Scientific CS650L and the sensors at NSA M1 use the Campbell Scientific CS655. The two sensors are nearly identical in function, and vendor specifications are based on the CS650 unless otherwise stated.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

An experimental investigation of flame and autoignition behavior of propane

We report autoignition delay time data are one important means to develop, quantify, and validate fundamental understanding of combustion chemistry at low temperatures (T<1200 K). However, low-temperature chemistry often has higher uncertainties and scatter in the experimental data compared with high-temperature ignition data (T>1200 K). In this study, autoignition properties of propane and oxygen mixtures were investigated using the University of Michigan rapid compression facility in order to understand the effects of ignition regimes on low-temperature ignition data. For the first time for propane, autoignition delay times were determined from pressure histories, and autoignition characteristics were simultaneously recorded using highspeed imaging of the test section through a transparent end-wall. Propane mixtures with fuel-to-O 2 equivalence ratios of φ = 0.25 and φ = 0.5 and O 2 -to-inert gas molar ratios of 1:3.76 were studied over the pressure range of 8.9 to 11.3 atm and the temperature range of 930 – 1070 K. The results showed homogeneous or strong autoignition occurred for all φ = 0.25 experiments, and inhomogeneous or mixed autoignition occurred for all φ = 0.5 experiments. While a limited temperature range is covered in the study, importantly the data span predicted transitions in autoignition behavior, allowing validation of autoignition regime hypotheses. Specifically, the results agree well with strong-autoignition limits proposed based on the Sankaran Criterion. The autoignition delay time data at the strong-ignition conditions are in excellent agreement with predictions using a well-validated detailed reaction mechanism from the literature and a zerodimensional modeling assumption. However, the experimental data at the mixed autoignition conditions were systematically faster than the model predictions, particularly at lower temperatures (T< ~970 K). The results are an important addition to the growing body of data in the literature that show mixed autoignition phenomena are important sources of the higher scatter observed in the low-temperature autoignition data for propane and other fuels. The results are discussed in terms of different methods to capture the effects of pre-autoignition heat release associated with mixed autoignition conditions and thereby address some of the discrepancies between kinetic modeling and experimental measurements.

42 ENGINEERING↗
DOE OSTI2024

Optical characterizations of densely doped Tm 3+ :KYW crystals at low temperatures

Abstract We investigate the optical lifetime, decay characteristics, spectral linewidth and energy level properties of thulium ions doped in a KY(WO 4 ) 2 crystal at 4 K temperature. High doping concentration of thulium ions with inhomogeneous broadening allow us to study nonradiative behaviors, instantaneous spectral diffusion, and spectral power broadening in this solid-state material. The theoretical consideration of ion–ion interactions is shown to accurately characterize the absorption, decay and other spectral behaviors of Tm 3 + ions. We observe more than ten-fold reduction in the decay time of 3 H 4 state and about three-fold reduction in the spectral-hole lifetime as we approach the center of the inhomogeneous broadening, corresponding to higher optical densities.

Lei, Yisheng (ORCID:0009000410141189)↗
DOE OSTI2021

Temperature-dependent Spectral Emission of Hexagonal Boron Nitride Quantum Emitters on Conductive and Dielectric Substrates

We report a reduction in the linewidth and suppression of spectral diffusion of quantum emitters in hexagonal boron nitride supported on a conductive substrate. In this work, we observe a temperature-dependent reduction in the spectral emission linewidth for CVD-grown and exfoliated crystals on conductive ITO relative to those seen on silicon dioxide (SiO 2 ) substrates. We show that the inhomogeneous linewidth can be suppressed by 45% as a result of using a conductive substrate. We investigate the zero-phonon line profile at temperatures ranging from 4 to 300 K and decompose the effects of thermal broadening and spectral diffusion at each temperature by Voigt fitting. The temperature dependence of homogeneous and inhomogeneous components of the broadening is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Measurements of nematic susceptibility with phase sensitive nuclear magnetic resonance in pulsed strain fields

Here, we present nuclear magnetic resonance data in BaFe 2 As 2 in the presence of pulsed strain fields that are interleaved in time with the radio frequency excitation pulses. In this approach, the preceding nuclear magnetization acquires a phase shift that is proportional to the strain and pulse time. The sensitivity of this approach is limited by the homogeneous decoherence time, T 2 , rather than the inhomogeneous linewidth. We measure the nematic susceptibility as a function of temperature and demonstrate a three orders of magnitude improvement in sensitivity. This approach will enable studies of the strain response in a broad range of materials that previously were inaccessible due to inhomogeneous broadening.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stripe order enhanced superconductivity in the Hubbard model

Unidirectional (“stripe”) charge density wave order has now been established as a ubiquitous feature in the phase diagram of the cuprate high-temperature superconductors, where it generally competes with superconductivity. Nonetheless, on theoretical grounds it has been conjectured that stripe order (or other forms of “optimal” inhomogeneity) may play an essential positive role in the mechanism of high-temperature superconductivity. Here, we report density matrix renormalization group studies of the Hubbard model on long four- and six-leg cylinders, where the hopping matrix elements transverse to the long direction are periodically modulated—mimicking the effect of putative period 2 stripe order. We find that even modest amplitude modulations can enhance the long-distance superconducting correlations by many orders of magnitude and drive the system into a phase with a substantial spin gap and superconducting quasi–long-range order with a Luttinger exponent, K sc ~ 1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗