Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transition Detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Detection by Transit Photometry

A periodic sequence of planetary transits provides a valid detection of an orbiting planet and provides the relative size of the planet and its orbital period. Ancillary measurements of the stellar spectrum and the variations of the star's radial velocity or position combined with stellar models allow the absolute size of the planet and its mass to be obtained. The results of this approach have already shown that the planet orbiting HD209458 has only 70% of the mass of Jupiter, but is nearly 50% larger in radius. Based on models of planetary structure, these results imply that the planet must have spent most of its lifetime so close to the star that it has not been able to cool and contract as have the giant planets in our Solar System. Thus its density is much less than Jupiter and Saturn and is actually less than that of water; i.e., about 0.4 gr/cu cm. If more sensitive measurements of the light curve of stars with closely orbiting planets can be made that provide the varying amplitude of the light reflected by the planet at various phases in its orbit, then characteristics of the planetary atmosphere can be obtained. Potentially, these data can identify major molecular species present in the atmosphere and tell us if clouds are present and yield the phase function of the aerosols. Although such detail cannot be obtained for Earth-size planets because their signal amplitudes are too small, it is possible to get data critical to the determination of the structure of extrasolar planetary systems. In particular, the size distributions and their orbital distributions can be measured by the transit photometry missions now in development. The COROT mission should be able to find large terrestrial planets in short-period orbits while the more ambitious Kepler and Eddington missions should be able to detect planets even smaller than the Earth and at orbital distances that place them in the habitable zone of their stars.

Borucki, William J.↗
DOE OSTI2020

Effects of cluster expansion on the locations of phase transition boundary as a first step to quantify uncertainty in first principles statistical mechanics framework

Predicting phase diagrams from first principle calculations eliminates the need of tedious experimental trials and errors. Fully automating first principle phase diagram calculations without any sort of human intervention has been a long daunting task and troubling scientific communities for decades. This grand problem remains not fully resolved, largely due to the vastly high-dimensional parameter space associated with density functional theory, cluster expansion, lattice Monte Carlo, and the substantial uncertainty propagating through a set of complex simulations. As a first step to tackle this grand problem, we reported a first demonstration of how sensitive phase boundary locations can be to various cluster expansion fittings and input DFT training data. To the best knowledge of the authors, this study reported the first ever attempt to quantify uncertainty in first principles statistical mechanics framework. In addition, a semi-automated phase transition detection algorithm has been devised in this paper to deal with the associated statistical errors and uncertainties from Monte Carlo method and its predecessor DFT calculations and cluster expansions. This algorithm has been applied in a classical cluster expansion Mg-Cd binary alloy system to detect phase transitions at various locations of phase diagram using different cluster expansions to demonstrate its predictive power and quantify uncertainties. The results suggested that using Chebyshev basis function shifted the transition locations toward the dilute solid solution phase and expanded the phase stability of concentrated ordered phases to wider composition range. The addition of perturbed defect configurations into training data set lowered the order-disorder transition temperature to be away from true transition temperature, suggesting the transition nature is indeed configurational disorder dominated rather than defect assisted. Finally, we found that the weighting has negligible effect on the transition locations, except for the case of using Chebyshev basis function to fit all non-weighted configurations that can be susceptible to Monte Carlo sampling hysteresis.

36 MATERIALS SCIENCE↗
NASA NTRS2018

The Impact of Stellar Variability on the Detection of Transiting Earth-Like Planets

Stellar variability represents a key limitation on the detectability of weak transit signatures of small, Earth-size planets with space-based missions such as NASA's Kepler Mission or ESA's PLATO Mission. The expectations for the performance of the Kepler Mission in the face of solar-like variability were predicated on observations of the Sun with the Variability of Solar Irradiance and Gravity Oscillations (VIRGO) instrument aboard NASA and ESA's joint Solar and Heliospheric Observatory (SOHO) mission, which was launched in December 1995. Analyses of SOHO data indicated that solar-like variability would contribute ~10 ppm to Kepler's noise budget at 6.5 ours, a typical grazing transit timescale. This proved to be optimistic as the typical 12th mag G2V star in the Kepler field of view exhibited 20 ppm of stellar variability-related noise at 6.5 hours, making the detection of true Earth-Sun analogs more difficult. While the consequent increase in the total noise at 6.5 hours from 20 ppm to 30 ppm could have been overcome by extending the mission to a total duration of 7 to 8 years. Unfortunately, a second reaction wheel failed in May 2013, ending the Kepler primary mission. Nevertheless, Kepler proved to be a veritable cornucopia of science results, both for exoplanets and for astrophysics. The phenomenal photometric precision and continuous observations required in order to identify small, rocky transiting planets enables the study of a large range of phenomena contributing to stellar variability for many thousands of solar-like stars in Kepler's field of view in exquisite detail. These effects range from <1 ppm acoustic oscillations on timescales from a few minutes and longward, to flares on timescales of hours, to spot-induced modulation on timescales of days to weeks to activity cycles on timescales of months to years. Kepler discovered over 2600 validated and confirmed exoplanets, and measured the pressure-mode oscillations of over 15000 stars over the course of its mission and the reconstituted K2 mission. We present the adaptive, wavelet-based matched filter used for both the Kepler and the TESS missions, and discuss the connections between this detection algorithm and fundamental detection theory, which allows the detector to function as a noise characterization engine. This provides a dynamical measurement of the photometric noise at transit timescales and thus, a key performance metric for missions like PLATO and Kepler. We give an overview of the stellar variability we see across the full range of spectral types observed by Kepler, from the cool, small red M stars to the hot, large late A stars, both in terms of amplitude as well as timescale.

exoplanets↗
NASA NTRS2018

The Impact of Stellar Variability on the Detection of Transiting Earth-like Planets

Stellar variability represents a key limitation on the detectability of weak transit signatures of small, Earth-size planets with space-based missions such as NASA's Kepler Mission or ESA's PLATO Mission. The expectations for the performance of the Kepler Mission in the face of solar-like variability were predicated on observations of the Sun with the Variability of Solar Irradiance and Gravity Oscillations (VIRGO) instrument aboard NASA and ESA's joint Solar and Heliospheric Observatory (SOHO) mission, which was launched in December 1995. Analyses of SOHO data indicated that solar-like variability would contribute approx.10 ppm to Kepler's noise budget at 6.5 ours, a typical grazing transit timescale. This proved to be optimistic as the typical 12th mag G2V star in the Kepler field of view exhibited 20 ppm of stellar variability-related noise at 6.5 hours, making the detection of true Earth-Sun analogs more difficult. While the consequent increase in the total noise at 6.5 hours from 20 ppm to 30 ppm could have been overcome by extending the mission to a total duration of 7 to 8 years. Unfortunately, a second reaction wheel failed in May 2013, ending the Kepler primary mission. Nevertheless, Kepler proved to be a veritable cornucopia of science results, both for exoplanets and for astrophysics. The phenomenal photometric precision and continuous observations required in order to identify small, rocky transiting planets enables the study of a large range of phenomena contributing to stellar variability for many thousands of solar-like stars in Kepler's field of view in exquisite detail. These effects range from less than 1 ppm acoustic oscillations on timescales from a few minutes and longward, to flares on timescales of hours, to spot-induced modulation on timescales of days to weeks to activity cycles on timescales of months to years. Kepler discovered over 2600 validated and confirmed exoplanets, and measured the pressure-mode oscillations of over 15000 stars over the course of its mission and the reconstituted K2 mission. We present the adaptive, wavelet-based matched filter used for both the Kepler and the TESS missions, and discuss the connections between this detection algorithm and fundamental detection theory, which allows the detector to function as a noise characterization engine. This provides a dynamical measurement of the photometric noise at transit timescales and thus, a key performance metric for missions like PLATO and Kepler. We give an overview of the stellar variability we see across the full range of spectral types observed by Kepler, from the cool, small red M stars to the hot, large late A stars, both in terms of amplitude as well as timescale.

transit surveys↗
NASA NTRSDate not supplied

Detectability of Transiting Terrestrial Planets in the Habitable Zone with TESS

In the Revised TESS Habitable Zone Catalog, Kaltenegger et al. (2021) identified the 2-min TESS target stars that were observed for sufficient duration over consecutive primary mission sectors to unambiguously capture a transit signature of planets orbiting in the Habitable Zone (HZ). The Catalog did not, however, identify the host stars for which transiting planets with HZ orbits and specified radii would be detectable based on the photometric precision of the retrieved light curves. We employ the Combined Differential Photometric Precision (CDPP) computed at 15 pulse durations in the Science Processing Operations Center (SPOC) transit searches of the primary mission light curves to estimate the signal-to-noise ratio (S/N) associated with transiting terrestrial planets (1.0 Re <= Rp<= 2.0 Re) in the HZ of the Catalog stars. We consider orbital periods under three HZ scenarios: Recent Venus, Earth Analog, and Early Mars. Given S/N, we further estimate the probability of detection of transiting terrestrial planets for each Catalog star and HZ scenario in the primary mission SPOC transit searches. We also present the expected yield by HZ scenario and planet radius under the assumption that all Catalog stars host such planets.

TESS↗
NASA NTRS1998

Obtaining the Mass and Radius of Extra-Solar Giant Planets

The scientific utility and feasibility of detecting transits of the 9 known extrasolar planets is explored. A transit of a solar-like star by a Jupiter mass planet produces a 1% decrease in the amount of light received from the star. Transit observation will remove the ambiguity in the measurement of the planetary mass inherent in the radial velocity method and confirm the planet's existence. The 9 known planets have a 33% chance of producing at least one observable transit. Additional extrasolar planet detections from the radial velocity surveys will increase this probability to greater than 90%. The radius of the planet can be determined by the fractional decrease in light received during transit. The mass and radius may distinguish rocky or gas giant planets from brown dwarfs. The probability of detection, the transit signal size and duration, and predictions of the transit times (including errors) are calculated for circular and elliptical orbits. Observational limits are investigated and it is shown that small telescopes and existing detectors are adequate enough to achieve the 0.1% photometry necessary to detect transits of the known extrasolar planets.

Castellano, Tim↗
NASA NTRS1989

In-flight boundary-layer transition measurements on a swept wing

Flight tests were conducted at three different altitudes to detect transition on a smoothed test region of a swept-wing business jet wing using surface hot-film sensors and sublimating chemicals. Strong influence of sweep angle on transition location was observed when the aircraft was flown at some sideslip conditions to simulate changes in effective wing sweep angle. No effects of engine noise on transition were measured when different engine power settings were used. Flight instrumentation and ground data analysis techniques are described. Correlation was obtained between the hot-film sensor signals and sublimating chemicals for transition detection. Crossflow vortices were observed for one flight condition. Results of analyzed data for various flight-test conditions are presented.

Ahmed, Anwar↗
NASA NTRS2016

Boundary-Layer Detection at Cryogenic Conditions Using Temperature Sensitive Paint Coupled with a Carbon Nanotube Heating Layer

Detection of flow transition on aircraft surfaces and models can be vital to the development of future vehicles and computational methods for evaluating vehicle concepts. In testing at ambient conditions, IR thermography is ideal for this measurement. However, for higher Reynolds number testing, cryogenic facilities are often used, in which IR thermography is difficult to employ. In these facilities, temperature sensitive paint is an alternative with a temperature step introduced to enhance the natural temperature change from transition. Traditional methods for inducing the temperature step by changing the liquid nitrogen injection rate often change the tunnel conditions. Recent work has shown that adding a layer consisting of carbon nanotubes to the surface can be used to impart a temperature step on the model surface with little change in the operating conditions. Unfortunately, this system physically degraded at 130 K and lost heating capability. This paper describes a modification of this technique enabling operation down to at least 77 K, well below the temperature reached in cryogenic facilities. This is possible because the CNT layer is in a polyurethane binder. This was tested on a Natural Laminar Flow model in a cryogenic facility and transition detection was successfully visualized at conditions from 200 K to 110 K. Results were also compared with the traditional temperature step method.

Goodman, Kyle Z.↗
NASA NTRSDate not supplied

Transition Measurements on the SWiFT Model in the National Transonic Facility

Boundary layer transition locations on the Swept Wing Flow Test (SWiFT) Hybrid Wing Body model were measured in the National Transonic Facility (NTF) at the NASA Langley Research Center using several different methods. These methods include sublimating chemical flow visualization for a limited number of low Reynolds number conditions, as well as mean static pressure and dynamic pressure measurements. Results are presented for a range of conditions in the NTF, demonstrating Mach and Reynolds number effects. The transition front locations obtained from the different techniques agree well. A variation of the static pressure transition detection method is described in which continuous angle of attack polars are performed. This approach enables detection of the transition front at more challenging (high Reynolds number) conditions than is possible with sparser data from pitch-pause angle-of-attack polars. The trip dot effectiveness is also verified using all of the available diagnostics. Additionally, low Reynolds number results are compared with those acquired on the same model at the Aircraft Research Association (ARA) facility, and these results show good agreement overall, suggesting similar freestream flow quality conditions of the two facilities.

National Transonic Facility↗
NASA NTRSDate not supplied

Transition Measurements on the SWiFT Model in the National Transonic Facility

Boundary layer transition locations on the Swept Wing Flow Test (SWiFT) Hybrid Wing Body model were measured in the National Transonic Facility (NTF) at the NASA Langley Research Center using several different methods. These methods include sublimating chemical flow visualization for a limited number of low Reynolds number conditions, as well as mean static pressure and dynamic pressure measurements. Results are presented for a range of conditions in the NTF, demonstrating Mach and Reynolds number effects. The transition front locations obtained from the different techniques agree well. A variation of the static pressure transition detection method is described in which continuous angle of attack polars are performed. This approach enables detection of the transition front at more challenging (high Reynolds number) conditions than is possible with sparser data from pitch-pause angle-of-attack polars. The trip dot effectiveness is also verified using all of the available diagnostics. Additionally, low Reynolds number results are compared with those acquired on the same model at the Aircraft Research Association (ARA) facility, and these results show good agreement overall, suggesting similar freestream flow quality conditions of the two facilities.

National Transonic Facility↗
NASA NTRS1999

Unified Model Deformation and Flow Transition Measurements

The number of optical techniques that may potentially be used during a given wind tunnel test is continually growing. These include parameter sensitive paints that are sensitive to temperature or pressure, several different types of off-body and on-body flow visualization techniques, optical angle-of-attack (AoA), optical measurement of model deformation, optical techniques for determining density or velocity, and spectroscopic techniques for determining various flow field parameters. Often in the past the various optical techniques were developed independently of each other, with little or no consideration for other techniques that might also be used during a given test. Recently two optical techniques have been increasingly requested for production measurements in NASA wind tunnels. These are the video photogrammetric (or videogrammetric) technique for measuring model deformation known as the video model deformation (VMD) technique, and the parameter sensitive paints for making global pressure and temperature measurements. Considerations for, and initial attempts at, simultaneous measurements with the pressure sensitive paint (PSP) and the videogrammetric techniques have been implemented. Temperature sensitive paint (TSP) has been found to be useful for boundary-layer transition detection since turbulent boundary layers convect heat at higher rates than laminar boundary layers of comparable thickness. Transition is marked by a characteristic surface temperature change wherever there is a difference between model and flow temperatures. Recently, additional capabilities have been implemented in the target-tracking videogrammetric measurement system. These capabilities have permitted practical simultaneous measurements using parameter sensitive paint and video model deformation measurements that led to the first successful unified test with TSP for transition detection in a large production wind tunnel.

Burner, Alpheus W.↗
NASA NTRS2001

Detection of Terrestrial Planets Using Transit Photometry

Transit photometry detection of planets offers many advantages: an ability to detect terrestrial size planets, direct determination of the planet's size, applicability to all main-sequence stars, and a differential brightness change of the periodic signature being independent of stellar distance or planetary orbital semi-major axis. Ground and space based photometry have already been successful in detecting transits of the giant planet HD209458b. However, photometry 100 times better is required to detect terrestrial planets. We present results of laboratory measurements of an end-to-end photometric system incorporating all of the important confounding noise features of both the sky and a space based photometer including spacecraft jitter. In addition to demonstrating an instrumental noise of less than 10 ppm (an Earth transit of a solar-like star is 80 ppm), the brightnesses of individual stars were dimmed to simulate Earth-size transit signals. These 'transits' were reliably detected as part of the tests.

Koch, David↗
NASA NTRS1984

Natural laminar flow flight experiments on a swept-wing business jet

Flight test experiments have been conducted to measure the extent and nature of laminar flow on a smoothed test region of a swept-wing business jet. Surface hot film anemometers and sublimating chemicals were used for transition detection. Surface pressure distributions were measured using pressure belts. Instrumentation techniques and problems are presented. Correlation was obtained between the hot film and sublimating chemicals for transition detection. Taylor-Goertler vortices were observed for some flight conditions. Boundary layer stability analysis is being conducted using measured pressure distributions to determine the correlation possible for transition prediction on swept wings.

Wentz, W. H., Jr.↗
NASA NTRS1989

Comparisons of boundary-layer transition measurement techniques in the Langley Unitary Plan wind tunnel

Four different boundary-layer transition detection techniques, namely liquid crystals, very thin hot films, IR photography, and an optical interferometer, were compared using the same flat plate model for the same tunnel conditions. The comparisons, conducted at NASA-Langley, involved not only their sensitivity to transition but also their ease of use. The thin films, as expected, gave excellent quantitative information and were used as the standard for evaluating the other techniques. Both the liquid crystals and IR photography were able to detect transition before the boundary-layer intermittency factor had reached 50 percent. The optical interferometer was unsuccessful. Conditions sampled included a range of Mach numbers from 1.5 to 2.5 and unit Reynolds numbers from 1.0 to 4.0 million/foot.

Hall, R. M.↗
DOE OSTI2025

In-Situ FTIR Detection of Transition Metal (TM)-Ion Dissolution From Cathodes in Li-Ion Batteries

Transition metal (TM) ions, commonly Ni and Mn, play a crucial role in Li-ion battery cathodes as the reaction centers for rapid redox reactions. A major challenge with TM-based cathodes is capacity degradation, particularly at higher operating voltages. This degradation is closely linked to the dissolution of TMs from the cathode materials and their subsequent deposition on the anode. This process not only modifies the surface structure of the cathode but, more significantly, alters the SEI composition on the anode [1-2]. The dissolution of TMs cations into a liquid electrolyte from cathode materials, such as Mn-ion dissolution from Mn-rich cathode (LMR), is detrimental to the cycling performance of Li-ion batteries [3-4]. Much attention has been paid to this issue but there remains a lack of characterization techniques which can detect the TM-ion dissolution from the cathode during electrochemical measurements. In our study, we use in-situ ATR-FTIR as an effective technique to probe the TM-ion dissolution from the cathode. We have first demonstrated the detrimental effects of TM ions on the electrochemical performance of Li-ion batteries by adding a small amount of TM salt (50 mM Mn(PF6)) to the electrolyte of a Li-ion coin cell with LFP and graphite electrode. We observed a rapid capacity fade after the first delithiation cycle. To investigate TM ion dissolution, we established a baseline IR spectrum for various TM solvation states (such as Mn and Ni) by measuring concentration-dependent IR spectra. This baseline spectrum helps us detect TM ion dissolution during battery cycling. In this work, we discuss in detail the effect of TM ions on the electrochemical performance of Li-ion batteries and the detection of TM ions during battery cycling using in-situ FTIR spectroscopy. We will compare TM dissolution between coated and uncoated cathodes to examine the effect of cathode coatings to mitigate degradation due to TM dissolution and cross-over from cathode to anode. References: (1) Zhan, C.; Wu, T.; Lu, J.; Amine, K. Dissolution, migration, anddeposition of transition metal ions in Li-ion batteries exemplified byMn-based cathodes - a critical review. Energy Environ. Sci. 2018, 11,243-257. (2) Jung, R.; Linsenmann, F.; Thomas, R.; Wandt, J.; Solchenbach,S.; Maglia, F.; Stinner, C.; Tromp, M.; Gasteiger, H. A. Nickel,Manganese, and Cobalt Dissolution from Ni-Rich NMC and TheirEffects on NMC622-Graphite Cells. J. Electrochem. Soc. 2019, 166,A378-A389. (3) Zhao, L.; Chenard, E.; Capraz, O. O.; Sottos, N. R.; White, S.R. Direct Detection of Manganese Ions in Organic Electrolyte by UV-Vis Spectroscopy. J. Electrochem. Soc. 2018, 165, A345-A348 (4) Zhang, Y.; Hu, A.; Xia, D.; Hwang, S.; Sainio, S.; Nordlund, D.;Michel, F. M.; Moore, R. B.; Li, L.; Lin, F. Operando characterization and regulation of metal dissolution and redeposition dynamics nearbattery electrode surface. Nat. Nanotechnol. 2023, 18, 790.

25 ENERGY STORAGE↗
NASA NTRS1985

Further results of natural laminar flow flight test experiments

Flight test experiments were conducted to measure the extent and nature of natural laminar flow on a smoothed test region of a swept-wing business jet wing. Surface hot film anemometry and sublimating chemicals were used for transition detection. Surface pressure distributions were measured using pressure belts. Engine noise was monitored by a microphone attached to the wing surface to study possible acoustic effects on stability of the laminar boundary layer. Side-slip conditions were flown to simulate changes in effective wing sweep. Flight instrumentation and ground data analysis techniques and a method for measuring intermittency of turbulence are described. Correlation was obtained between the hot film gage signals and chemicals for transition detection. Cross-flow vortices were observed for some flight conditions. Results of spectral and statistical analysis of the hot film signals for various flight test conditions are presented.

Wentz, W. H., Jr.↗
NASA NTRS1997

In-Flight Flow Visualization Using Infrared Thermography

The feasibility of remote infrared thermography of aircraft surfaces during flight to visualize the extent of laminar flow on a target aircraft has been examined. In general, it was determined that such thermograms can be taken successfully using an existing airplane/thermography system (NASA Dryden's F-18 with infrared imaging pod) and that the transition pattern and, thus, the extent of laminar flow can be extracted from these thermograms. Depending on the in-flight distance between the F-18 and the target aircraft, the thermograms can have a spatial resolution of as little as 0.1 inches. The field of view provided by the present remote system is superior to that of prior stationary infrared thermography systems mounted in the fuselage or vertical tail of a subject aircraft. An additional advantage of the present experimental technique is that the target aircraft requires no or minimal modifications. An image processing procedure was developed which improves the signal-to-noise ratio of the thermograms. Problems encountered during the analog recording of the thermograms (banding of video images) made it impossible to evaluate the adequacy of the present imaging system and image processing procedure to detect transition on untreated metal surfaces. The high reflectance, high thermal difussivity, and low emittance of metal surfaces tend to degrade the images to an extent that it is very difficult to extract transition information from them. The application of a thin (0.005 inches) self-adhesive insulating film to the surface is shown to solve this problem satisfactorily. In addition to the problem of infrared based transition detection on untreated metal surfaces, future flight tests will also concentrate on the visualization of other flow phenomena such as flow separation and reattachment.

vanDam, C. P.↗