Search NASA⌕ Search

SEARCH · Search NASA

Results for “UAM Vehicle Noise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Acoustic Measurements for the Moog S-250 Vehicle in Hover

Acoustic measurements for hover conditions and electric motor noise tests were conducted for the Moog S-250 research aircraft, an RPM-controlled quadcopter-type Urban Air Mobility (UAM) vehicle with four sets of contra-rotating rotors. The objectives of the study included determining the minimum far-field distance, the noise characteristics, and the potential for electric motor noise to contribute to the overall acoustic radiation for the full-scale UAM vehicle. Acoustic data for full-scale aircraft are critical for determining the impact of these vehicles on the surrounding communities. The results showed the far-field was reached by 8.1 single rotor diameters or 2.7 vehicle diameters as defined by the longest tip-to-tip rotor dimension for the vehicle. In hover, the peak acoustic radiation occurred at a declination angle of roughly 29° below the midplane between the upper and lower rotors. The lowest acoustic levels occurred below the aircraft. The electric motor noise studies, conducted with the rotors removed, showed motor noise radiated at shaft orders 17 – 20, whereas rotor noise covered the range of 2 – 24 shaft orders. There was some evidence that electric motor noise was present in previous ground run-up measurements.

Urban Air Mobility Noise↗
NASA NTRS2024

UAM Source Noise Hemisphere Flight Test Measurement Protocol

The overall goal of the NASA Urban Air Mobility Noise Working Group (UNWG) Ground and Flight Test Subgroup (SG2) is to develop a research measurement protocol, or set of guidelines, which can be used to adequately quantify the Urban Air Mobility (UAM) community noise impact via the creation of acoustic profiles that describe the vehicle source emission characteristics. This document lays out a measurement protocol for acquiring data suitable for the development of compact noise hemispheres that characterize the source acoustic emissions from full-scale UAM or Advanced Air Mobility (AAM) vehicles in outdoor flight. It also provides a narrative describing the numerous aspects of outdoor flight test design and execution that will hopefully prove useful to flight test engineers and practitioners.

Acoustics↗
NASA NTRSDate not supplied

An Overview of Nasa Research on Aam Noise and A Recent Noise and Number Study

NASA conducts psychoacoustic research on the human response to Urban Air Mobility (UAM) vehicles as part of its Advanced Air Mobility (AAM) mission. This presentation provides an overview of NASA’s role in AAM research with an emphasis on recent work investigating people’s response to frequent UAM vehicle flyover sounds.

UAM↗
NASA NTRS2021

Noise Exposure Maps of Urban Air Mobility

A noise exposure map is “a scaled geographic depiction of an airport, its noise exposure contours, noise-sensitive facilities, and land uses in the airport surrounding area” developed in accordance with the FAA’s 14 Code of Federal Regulation Part 150. This paper is the first to explore the applicability of airport noise exposure maps to Urban Air Mobility (UAM). The FAA’s airport noise compatibility planning program is first described. Then the applicability of the noise exposure map to Urban Air Mobility (UAM) is explored. Finally, new airspace infrastructure, including vertiport locations and UAM routes from NASA’s UAM engineering simulations, and local noise-sensitive facility locations and land use information were collected and processed to develop the noise exposure maps of UAM near the Dallas-Fort Worth area. The DNL noise contours resulting from a six-passenger electric quadrotor prototype vehicle are predicted using NASA’s AIRNOISEUAM software. The noise exposure maps of UAM are generated automatically using Python’s data analysis and visualization libraries. The results have applications for UAM’s noise compatibility planning, noise-reducing route planning, and vertiport location selection

Urban Air Mobility↗
NASA NTRS2021

Noise Exposure Map of Urban Air Mobility

A noise exposure map is “a scaled geographic depiction of an airport, its noise exposure contours, noise-sensitive facilities, and land uses in the airport surrounding area” developed in accordance with the FAA’s 14 Code of Federal Regulation Part 150. This paper is the first to explore the applicability of airport noise exposure maps to Urban Air Mobility (UAM). The FAA’s airport noise compatibility planning program is first described. Then the applicability of the noise exposure map to Urban Air Mobility (UAM) is explored. Finally, new airspace infrastructure, including vertiport locations and UAM routes from NASA’s UAM engineering simulations, and local noise-sensitive facility locations and land use information were collected and processed to develop the noise exposure maps of UAM near the Dallas-Fort Worth area. The DNL noise contours resulting from a six-passenger electric quadrotor prototype vehicle are predicted using NASA’s AIRNOISEUAM software. The noise exposure maps of UAM are generated automatically using Python’s data analysis and visualization libraries. The results have applications for UAM’s noise compatibility planning, noise-reducing route planning, and vertiport location selection. (To hear the voice please utilize the video uploaded to the record)

Urban Air Mobility↗
NASA NTRSDate not supplied

UAM Noise Working Group Meeting Subgroup 2: Ground & Flight Testing

The Urban Air Mobility Noise Working Group (UNWG) Sub-Group 2 is tasked with development of a research measurement protocol for UAM vehicle ground and flight testing to determine the impact of representative vehicles on community noise. This briefing is a bi-annual update to the UNWG participants at large regarding the activities of SG2, specifically the status of the group’s measurement protocols document under development.

Urban Air Mobility↗
NASA NTRSDate not supplied

Conceptual Design Trade Studies for Acoustic Predictions of the NASA UAM Tiltrotor Reference Vehicle

A toolchain of low-and mid-fidelity tools is applied to NASA’s Urban Air Mobility tiltrotor reference vehicle to quantify trades in sizing, performance, and noise at the conceptual design level. The process includes conceptual sizing, comprehensive analysis, and acoustic analysis to design and analyze versions of the concept tiltrotor with differing design variables. Rotor tip speed is the primary design variable studied, with blade twist, blade taper, and blade number also considered. The noise metrics used are the FAA/EASA certification Effective Perceived Noise Levels for takeoff, flyover, and approach. Certification condition noise is calculated for all conditions in both conversion and airplane flight modes, with airplane mode flight resulting in noise 10-25EPNdB quieter than conversion mode and tip speed variation providing noise reduction up to 9EPNdB.

Acoustic↗
NASA NTRSDate not supplied

Community Noise Impact of Urban Air Mobility Vehicle Operations

Advanced air mobility (AAM) missions, carried out by electrically driven air vehicles, are characterized by ranges of less than about 300-500 nm (about 500-900 km) and include both rural and urban operations. The missions may include public transportation, cargo delivery, air taxi, and emergency response. While the urban air mobility (UAM) subset of AAM is projected to have high economic benefit, it is also the most difficult to develop because it must overcome many barriers, including those associated with the airspace system, safety, and community noise. This presentation focuses on the utilization of UAM source noise data for assessment of community noise impact. Although a limited number of acoustic flight measurement campaigns have been made to characterize the source noise of prototype and preproduction UAM aircraft, prediction-based approaches are primarily considered herein. Following conceptual design, in which the vehicle is appropriately sized for its intended mission, a comprehensive analysis must be performed for a range of operating conditions spanning the flight envelope to determine the corresponding configurations of the vehicle, that is, the trimmed states. For each trimmed state, the noise produced by each source, for example, steady and unsteady rotor noise, may be computed and so-called source noise (hemi)spheres generated. These source data may subsequently be used in various community noise impact analyses. Several use cases are presented including those supporting noise certification and those for auralizations that may, in turn, be used as part of a perception-influenced design process. Land use planning tools for generating noise exposure maps, including those using simulation and integrated modeling approaches, are also presented. Finally, use cases supporting development of low noise flight operations, including an acoustic flight simulator and acoustically aware flight control, are considered.

aircraft community noise↗
NASA NTRSDate not supplied

Psychoacoustic Measures for UAM noise in the Context of Ambient Sound

The noise component of future aircraft and operations from Urban Air Mobility (UAM) vehicles is widely recognized as a challenge to community acceptance. NASA’s RVLT (Revolutionary Vertical Lift Technology) program is currently supporting research in the area of human response and psychoacoustics in an effort to augment current metrics for traditional aircraft. This talk will review current work at NASA Ames’ Human Systems Integration Division to evaluate detection, annoyance, and acceptability of UAM sound, in the context of expected ambient sound conditions.

aircraft noise disturbance↗
NASA NTRSDate not supplied

Community Noise Assessment of Urban Air Mobility Vehicle Operations using the FAA Aviation Environmental Design Tool

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses the initial development of a method to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed using fixed-point flight profiles and user-supplied noise data in a manner that avoids unwanted behavior in AEDT. A set of 32 routes in the Dallas-Ft. Worth area were assessed for single and multiple (fleet) operations for two concept vehicles.

urban air mobility↗
NASA NTRSDate not supplied

Community Noise Assessment of Urban Air Mobility Vehicle Operations using the FAA Aviation Environmental Design Tool

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate in communities close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration’s Aviation Environmental Design Tool (AEDT), does not support analysis of such operations due to a combined lack of a UAM aircraft performance model and aircraft noise data. This paper discusses the initial development of a method to assess the acoustic impact of UAM fleet operations on the community using AEDT and demonstrates its use for representative UAM operations. In particular, methods were developed using fixed-point flight profiles and user-supplied noise data in a manner that avoids unwanted behavior in AEDT. A set of 32 routes in the Dallas-Ft. Worth area were assessed for single and multiple (fleet) operations for two concept vehicles.

urban air mobility↗
NASA NTRS2023

Prediction of Noise-Power-Distance Data for Urban Air Mobility Vehicles

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate within communities and be close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration (FAA) Aviation Environmental Design Tool (AEDT), does not directly support analysis of such operations due to a combined lack of UAM aircraft flight performance model data and aircraft noise data. This paper addresses the latter by offering two prediction-based approaches for generation of noise-power-distance (NPD) data for use within AEDT. One utilizes the AEDT fixed-wing aircraft modeling approach and the other utilizes the AEDT rotary-wing aircraft modeling approach.

noise-power-distance↗
NASA NTRSDate not supplied

Urban Aerial Mobility Networks using Amphibious Vertical Takeoff and Landing Vehicles

This study considers novel urban aerial mobility (UAM) networks that address some of the key operator and community acceptance challenges inherent in proposed UAM operations. This paper seeks to examine three possible approaches to improve operator and community acceptance – specifically targeting cost, safety, and noise. First, the conceptual design space will be examined for VTOL amphibious vehicle technologies, including the implications of onwater versus in-flight time/speed. Second, the implications of minimizing community overflights by flying over-water will be examined. Third, the implications of the partial use of onwater, or near-shore/littoral, vertiports on UAM network performance will be examined. This study considers an alternate design trade space for urban aerial mobility systems. A large number of cities in the United States are located near or surround large bodies of water. Many of these same cities are considered to be candidates for metropolitan aerial transportation systems so as to moderate the impact of urban ground-transportation congestion. This paper will expand discussion and study of notional amphibious VTOL vehicles. There is nothing particularly new with regards to helicopters with amphibious takeoff and landing capability. For example, light rotorcraft have been outfitted with pontoons since the 1950s. Larger utility helicopters – used for carrying offshore oil-rig crew – have been designed, with varying degrees of success, to emergency land in rough waters in case of onboard mechanical system failures. The unique difference for the proposed amphibious UAM vehicles, as compared to these earlier amphibious rotorcraft, is that water operation is the norm rather than the exception and that, further, the water-born operation (and design) of such vehicles can be optimized to yield significant economic and operational benefits over solely UAM land-based stations and operations. Various different amphibious UAM networks will be discussed. A first-order set of analyses – employing novel mission metrics – is presented in this paper that will examine the operational performance of these amphibious networks. In particular, amphibious operations might address critical safety and community acceptance issues. An examination of the aerodynamic and hydrodynamic characteristics of amphibious VTOL UAM vehicles will be presented in this paper. One possible conceptual design for an amphibious UAM vehicle is a hybrid synchropter/hydroplane vehicle. As interest in urban aerial mobility grows, it is worthwhile to consider whether or not amphibious vertical takeoff and landing vehicles can play an important role in providing such mobility.

Urban Aerial Mobility↗
NASA NTRSDate not supplied

Prediction-Based Approaches for Generation of Noise-Power-Distance Data with Application to Urban Air Mobility Vehicles

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate within communities and be close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration (FAA) Aviation Environmental Design Tool (AEDT), does not directly support analysis of such operations due to a combined lack of UAM aircraft flight performance model data and aircraft noise data. This paper addresses the latter by offering two prediction-based approaches for generation of noise-power-distance (NPD) data for use within AEDT. One utilizes AEDT’s fixed-wing aircraft modeling approach and the other utilizes the rotary-wing aircraft modeling approach.

noise-power-distance↗
NASA NTRS2021

Noise Measurements from Ground Tests of the Moog SureFly Vehicle

Noise measurements from a ground test of a small vertical lift research vehicle are presented. The proof-of-concept all-electric vehicle called “SureFly” was developed by Moog, Inc. A cooperative effort between NASA and Moog, Inc. has led to one of the first acoustic test datasets from an Urban Air Mobility (UAM) vehicle being developed for passenger and cargo. Results show propeller and possibly motor tones are important for the overall noise levels. The vehicle has four support arms each with a pair of contra-rotating propellers. Noise measurements show higher noise levels from the lower propellers, likely due to inflow distortion from the arms and top propellers. Possible motor noise was identified by calculating harmonics of the line frequency and comparing to the tones in the narrowband acoustic spectra and phased microphone array data. The acoustic far field was found to be about 100 ft away from the vehicle, but additional microphones are needed to provide a better assessment. Results show the presence of modulation for some test conditions. The work reported here is only for ground tests.

Acoustics↗
NASA NTRSDate not supplied

Noise Measurements from Ground Tests of the Moog SureFly Vehicle

Noise measurements from a ground test of a small vertical lift research vehicle are presented. The proof-of-concept all-electric vehicle called “SureFly” was developed by Moog, Inc. A cooperative effort between NASA and Moog, Inc. has led to one of the first acoustic test datasets from an Urban Air Mobility (UAM) vehicle being developed for passenger and cargo. Results show propeller and possibly motor tones are important for the overall noise levels. The vehicle has four support arms each with a pair of contra-rotating propellers. Noise measurements show higher noise levels from the lower propellers, likely due to inflow distortion from the arms and top propellers. Possible motor noise was identified by calculating harmonics of the line frequency and comparing to the tones in the narrowband acoustic spectra and phased microphone array data. The acoustic far field was found to be about 100 feet away from the vehicle, but additional microphones are needed to provide a better assessment. Results show the presence of modulation for some test conditions. The work reported here is only for ground tests.

Acoustics↗