Search NASA⌕ Search

SEARCH · Search NASA

Results for “UV−visible”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Remote sensing of ocean currents

The author has identified the following significant results. Monthly field experiments in support of the NOAA investigation of ocean color boundary determination using ERTS-1 data have been conducted since June 1972. The boundary between coastal waters and the Loop Current has been detected by ERTS-1 as a result of sea state changes as well as color differences. Ocean information is contained in all 24 channels of the Bendix MSS flown on the C-130 in June 1972; this includes UV, visible, reflected IR, and emitted IR. Computer enhancement of MSS data is revealing many features not shown in the NDPF product.

Maul, G. A.↗

High-resolution imaging X-ray detector

The paper describes an X-ray detector using microchannel plates as a photocathode surface and imaging photoelectron multiplier, and a crossed wire grid as a two-dimensional position-sensitive detector. The position resolution is 10 microns. The crossed wire grid consists of 100-micron-diam wires on 200-micron centers. Position sensing is accomplished by electronic interpolation to 1/20 of the wire spacing. The quantum efficiency of the microchannel plates varies from 29% at 0.28 keV to 5% at 3 keV. This detector will provide second-of-arc X-ray imaging in the focal plane of the 342.9-cm focal length grazing-incidence telescope being prepared for the HEAO-B observatory. By addition of suitable photocathodes, it can be used for single-photon imaging light detection in the UV, visible, and near-IR-ranges. In all cases, it gives a very low dark counting rate, allows timing of individual events to 1 microsec or less, and can handle counting rates up to 10,000 per sec.

Kellogg, E.↗

The IUE spacecraft and instrumentation

The paper describes the general design, instrumentation, and ground control system of the International Ultraviolet Explorer (IUE) satellite, which will serve as an astronomical observatory providing both high and low resolution UV spectra of sources other than the sun. Basic data are given on the telescope, the UV-visible converter, the spectrograph optics, the camera response, and the communications systems.

Boggess, A.↗

Organic chemistry on Titan

Observations of nonequilibrium phenomena on the Saturn satellite Titan indicate the occurrence of organic chemical evolution. Greenhouse and thermal inversion models of Titan's atmosphere provide environmental constraints within which various pathways for organic chemical synthesis are assessed. Experimental results and theoretical modeling studies suggest that the organic chemistry of the satellite may be dominated by two atmospheric processes: energetic-particle bombardment and photochemistry. Reactions initiated in various levels of the atmosphere by cosmic ray, Saturn wind, and solar wind particle bombardment of a CH4 - N2 atmospheric mixture can account for the C2-hydrocarbons, the UV-visible-absorbing stratospheric haze, and the reddish color of the satellite. Photochemical reactions of CH4 can also account for the presence of C2-hydrocarbons. In the lower Titan atmosphere, photochemical processes will be important if surface temperatures are sufficiently high for gaseous NH3 to exist. Hot H-atom reactions initiated by photo-dissociation of NH3 can couple the chemical reactions of NH3 and CH4 and produce organic matter.

Chang, S.↗

Proton-induced coloring of multicomponent glasses

The paper describes the coloring induced by 85-MeV protons in three Schott glasses representative of glass types used as focusing elements in the International Ultraviolet Explorer Fine Error Sensor. It is shown that the absorption (i.e., coloring) induced in each glass by the radiation can be resolved into three optical absorption bands in the near UV-visible range. It is also discussed how that absorption grows with increasing dosages of protons, thus providing the means to predict degradation in any of the three glasses for a particular fluence of proton radiation.

Bartusiak, M. F.↗

Organic chemistry on Titan

Features taken from various models of Titan's atmosphere are combined in a working composite model that provides environmental constraints within which different pathways for organic chemical synthesis are determined. Experimental results and theoretical modeling suggest that the organic chemistry of the satellite is dominated by two processes: photochemistry and energetic particle bombardment. Photochemical reactions of CH4 in the upper atmosphere can account for the presence of C2 hydrocarbons. Reactions initiated at various levels of the atmosphere by cosmic rays, Saturn 'wind', and solar wind particle bombardment of a CH4-N2 atmospheric mixture can account for the UV-visible absorbing stratospheric haze, the reddish appearance of the satellite, and some of the C2 hydrocarbons. In the lower atmosphere photochemical processes will be important if surface temperatures are sufficiently high for gaseous NH3 to exist. It is concluded that the surface of Titan may contain ancient or recent organic matter (or both) produced in the atmosphere.

Chang, S.↗

Forbidden lines of np/q/ ions. I - Detailed balance and line intensity ratios

The detailed balance equations are solved in the ground state terms of 37 ions of C, N, O, Ne, Mg, Si, S and Fe; atomic data for 235 transitions of these ions are tabulated, and 14 line ratios of q = 2,4 ions and eight line ratios of q = 3 ions are graphed. Forbidden emission lines of these ions are in the far and near UV, visible, and near and far IR regions of the spectrum. In addition, detailed calculations of the relative populations of the levels of the ground state are presented as a function of temperature and density.

Kafatos, M.↗

Flare models

The current status of solar flare modeling is reviewed. Primary and secondary observational features that a proposed flare model should be capable of explaining are discussed, including energy storage and release, particle acceleration, mass ejection, heating of the temperature minimum region, X-ray, EUV, UV, visible and radio emission and mass flow. Consideration is then given to the twisted flux tube paramagnetic recombination model of Gold and Hoyle (1960), the current model of Alfven and Carlqvist (1967), closed current-sheet models such as those of Syrovatskii (1966, 1969, 1977) and Uchida and Sakurai (1977), open-field models such as those of Carmichael (1964) and Barnes and Sturrock (1972), the emerging flux model of Heyvaerts and Priest (1974, 1977, 1978) and the loop-flare models of Spicer (1977) and Colgate (1978). It is noted that no one model can yet account for all the observational features, and that there may turn out to be several types of flare, each requiring its own explanation.

Sturrock, P. A.↗

Solar extinction radiometry

Work on the spectral line parameters of hydroxyl radical band was completed. The UV-visible data obtained during 1977 balloon flights were used for zone quantification. The region between from 3100 A to 3500 A appears to be the best region to use for determining ozone columns with the three wavelength method. Ozone volume mixing ratios determined for the 1977 data were compared with standard middle latitude ozone profiles. Numerous high and low Sun scans were obtained during ascent and from float altitude (1981 balloon flight) at 0.003 A resolution in the 3068 A to 3089 A region. The spectra are being studied for OH identification and quantification.

Goldman, A.↗

The emission/absorption FE 2 spectrum of HD 45677

The complex behavior of the emission/absorption spectrum of Fe II is analyzed. The far UV spectrum is characterized almost solely by absorption lines, while, in the near UV, strong emissions are predominant. Radiative excitation from the ground to the highest levels (chi is approximately 10 eV) with re-emission in the near UV, visible and I.R. seems to be the main mechanism capable of explaining the observed spectral features.

Stalio, R.↗

The Spectroscopy of Venus

Problems in the spectroscopy of the planet are discussed. Two major problems are focused on: the almost total domination of the spectrum by CO2 (including almost every conceivable isotropic combination) makes the search for other species difficult; and the knowledge that no wavelengths short of the the microwave penetrate through the Venus cloud decks, which means that UV, visible, and IR remote sensing can investigate only the middle and upper atmosphere. The problem of intense multiple scattering is also considered.

Beer, R.↗

Laser reflection from oxide-coated aluminum

The theory of reflection from an oxide-coated metal is combined with experimentally measured parameters of aluminum to produce useful amplitude and phase shift information applicable to the concentration and direction of laser light. Amplitude and phase are plotted vs angle of incidence for several important laser wavelengths in the near UV, visible, and IR spectral regions.

Williams, M. D.↗

Extreme ultraviolet imaging spectrometer for thermospheric emissions

One of the instruments that has been developed to fly on the Space Shuttle is the Imaging Spectrometric Observatory, an array of five imaging spectrometers to cover the 300-12,000-A wavelength range. In this paper the spectrometer designed to operate in the extreme ultraviolet is described. The instrument is intended for studies of the thermosphere and magnetosphere and support of various plasma experiments to be performed from the Shuttle. The design is modular so that various components such as gratings and detectors can be changed and optimized for a range of specific studies following the first survey mission. The detector is an intensified 2-D CCD which permits simultaneous spectral and spatial imaging. The spectral multiplexing gives the spectrometer a considerable speed advantage. The instrument has a small field of view and is thus capable of obtaining much needed scale height information on the atmospheric EUV emissions. Operating from the Shuttle, global and temporal coverage will be obtained, and the EUV data will be enhanced by the simultaneously acquired UV, visible, and near-IR observations.

Torr, M. R.↗

Evaluation of colorless polyimide film for thermal control coating applications

A series of essentially colorless aromatic polyimide films was synthesized and characterized with the objective of obtaining maximum optical transparency for applications in space. Optical transparency is a requirement for high performance polymeric films used in second surface mirror coatings on thermal control systems. The intensity in color of aromatic polyimide films was lowered by reducing the electronic interaction between chromophoric centers in the polymer molecular structure and by using highly purified monomers. The resulting lightly colored to colorless polyimide films were characterized by UV-visible and infrared spectroscopy before and after exposure to 300 equivalent solar hours UV irradiation and varying doses of 1 MeV electron irradiation. After irradiation, the films were found to be 2 to 2.5 times more transparent than commercial polyimide film of the same thickness.

St.clair, A. K.↗

The effects of the diffuse radiation fields due to multiple scattering and thermal reradiation by dust on the dynamics and thermodynamics of a dusty cometary atmosphere

A self-consistent model of a dirty, clathrate cometary nucleus is extended to account for diffuse radiation fields caused by multiple scattering and thermal reradiation of the solar continuum by dust. The model is configured to fit conditions expected for the various spacecraft which will encounter Halley's comet at 0.89 AU. The atmosphere is assumed a chemically reactive dust-gas mixture in quasi-steady spherically symmetric expansion. The effect of electron-neutral ion collisions is accounted for, along with rate constants of the various species of clathrate ice particles and radiative transfer of the solar input in the UV, visible and near-IR intervals. The opacity of the circumnuclear dust is projected to be an order of magnitude greater than previous estimates, which severely impacts the potential visibility of the nucleus to the cameras of the flyby satellites.

Marconi, M. L.↗

Evaluation of colorless polyimide film for thermal control coating applications

A series of essentially colorless aromatic polyimide films was synthesized and characterized with the objective of obtaining maximum optical transparency for applications in space. Optical transparency is a requirement for high performance polymeric films used in second surface mirror coatings on thermal control systems. The intensity in color of aromatic polyimide films was lowered by reducing the electronic interaction between chromophoric centers in the polymer molecular structure and by using highly purified monomers. The resulting lightly colored to colorless polyimide films were characterized by UV-visible and infrared spectroscopy before and after exposure to 300 equivalent solar hours UV irradiation and varying doses of 1 MeV electron irradiation. After irradiation, the films were found to be 2 to 2.5 times more transparent than commercial polyimide film of the same thickness.

St. Clair, A. K.↗

Laboratory Methods for the Measurement of Pollutants in Water and Waste Effluents

The requirement for accurate, precise, and rapid analytical procedures for the examination of water and waste samples requires the use of a variety of instruments. The instrumentation in water laboratories includes atomic absorption, UV-visible. and infrared spectrophotometers, automatic colorimetric analyzers, gas chromatographs and mass spectrometers. Because of the emphasis on regulatory action, attention is being directed toward quality control of analytical results. Among the challenging problems are the differentiation of metallic species in water at nanogram concentrations, rapid measurement of free cyanide and free ammonia, more sensitive methods for arsenic and selenium and improved characterization of organic contaminants.

Ballinger, Dwight G.↗

Neutron detection efficiency measurements of organic glass scintillator arrays

We characterize the neutron detection efficiency of pixelated organic glass scintillator (OGS) arrays manufactured in two ways: an additive method in which the OGS is cast in place in a pixelated mold, and a subtractive method in which the scintillator is first cast as a large block before being cut in bars and bonded together to form the array. The cast-in-place array utilizes a mixture of “bis(9,9-dimethyl-9H-fluoren-2-yl)diphenylsilane” (P2), “tri([1,1'-biphenyl]-4-yl)(phenyl)silane” (PB3), and “4-bis(2-methylstyryl)benzene” (MSB), and 50% by weight of polystyrene is added to the mixture for subtractive manufactured array. We compare the performance of the OGS arrays to that of an EJ-299-33M plastic scintillator array that was manufactured using a subtractive process similar to that of the second OGS array.

Neutron detectors (cold, thermal, fast neutrons)↗