Search NASA⌕ Search

SEARCH · Search NASA

Results for “Unmodeled Dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

An estimator-predictor approach to PLL loop filter design

An approach to the design of digital phase locked loops (DPLLs), using estimation theory concepts in the selection of a loop filter, is presented. The key concept is that the DPLL closed-loop transfer function is decomposed into an estimator and a predictor. The estimator provides recursive estimates of phase, frequency, and higher order derivatives, while the predictor compensates for the transport lag inherent in the loop. This decomposition results in a straightforward loop filter design procedure, enabling use of techniques from optimal and sub-optimal estimation theory. A design example for a particular choice of estimator is presented, followed by analysis of the associated bandwidth, gain margin, and steady state errors caused by unmodeled dynamics. This approach is under consideration for the design of the Deep Space Network (DSN) Advanced Receiver Carrier DPLL.

Statman, J. I.↗
NASA NTRS1986

VEGA Pathfinder navigation for Giotto Halley encounter

Results of the VEGA Pathfinder concept which was used to successfully target the European Space Agnecy's Giotto spacecraft to a 600 km encounter with the comet Halley are presented. Pathfinder was an international cooperative navigation activity involving USSR, European and U.S. space agencies. The final Giotto targeting maneuver was based on a comet location determined from optical data acquired by the earlier arriving Soviet VEGA spacecraft. Inertial pointing angles extracted from optical images of the comet nucleus were combined with a precise estimate of the VEGA encounter orbits determined using VLBI data acquired by NASA's Deep Space Network to predict the location of Halley at Giotto encounter. This article describes the VLBI techniques used to determine the VEGA orbits and shows that the insensitivity of the VLBI data strategy to unmodeled dynamic error sources resulted in estimates of the VEGA orbits with an accuracy of 50 km.

Ellis, J.↗
NASA NTRS1986

Inherent robustness of discrete-time adaptive control systems

Global stability robustness with respect to unmodeled dynamics, arbitrary bounded internal noise, as well as external disturbance is shown to exist for a class of discrete-time adaptive control systems when the regressor vectors of these systems are persistently exciting. Although fast adaptation is definitely undesirable, so far as attaining the greatest amount of global stability robustness is concerned, slow adaptation is shown to be not necessarily beneficial. The entire analysis in this paper holds for systems with slowly varying return difference matrices; the plants in these systems need not be slowly varying.

Ma, C. C. H.↗
NASA NTRS1987

Robust time and frequency domain estimation methods in adaptive control

A robust identification method was developed for use in an adaptive control system. The type of estimator is called the robust estimator, since it is robust to the effects of both unmodeled dynamics and an unmeasurable disturbance. The development of the robust estimator was motivated by a need to provide guarantees in the identification part of an adaptive controller. To enable the design of a robust control system, a nominal model as well as a frequency-domain bounding function on the modeling uncertainty associated with this nominal model must be provided. Two estimation methods are presented for finding parameter estimates, and, hence, a nominal model. One of these methods is based on the well developed field of time-domain parameter estimation. In a second method of finding parameter estimates, a type of weighted least-squares fitting to a frequency-domain estimated model is used. The frequency-domain estimator is shown to perform better, in general, than the time-domain parameter estimator. In addition, a methodology for finding a frequency-domain bounding function on the disturbance is used to compute a frequency-domain bounding function on the additive modeling error due to the effects of the disturbance and the use of finite-length data. The performance of the robust estimator in both open-loop and closed-loop situations is examined through the use of simulations.

Lamaire, Richard Orville↗
NASA NTRS1987

Robust controller synthesis for a large flexible space antenna

The linear-quadratic Gaussian/loop-transfer-recovery method is used to synthesize a fine-pointing control system for a large space antenna. A finite-element model for the 122-m hoop/column antenna is employed, and a compensator, utilizing attitudes sensors and torque actuators, is designed which achieves pointing performance while maintaining stability robustness to unmodeled dynamics. Inclusion of the rigid-body modes plus the first three elastic modes is found to be necessary to achieve a 0.1-rad/s bandwidth. Results are obtained by employing a modification of the standard robustness recovery procedure, which reduces the conservative nature of the design methodology. Performance degradation is encountered due to the presence of unavoidable invariant zeros within the design bandwidth.

Sundararajan, N.↗
NASA NTRS1986

VEGA Pathfinder navigation for Giotto Halley encounter - An application of VLBI techniques

Results of the VEGA Pathfinder concept which was used to successfully target the European Space Agency's Giotto spacecraft to a 600 km encounter with the comet Halley are presented. Pathfinder was an international cooperative navigation activity involving USSR, European and U.S. space agencies. The final Giotto targeting maneuver was based on a comet location determined from optical data acquired by the earlier arriving Soviet VEGA spacecraft. Inertial pointing angles extracted from optical images of the comet nucleus were combined with a precise estimate of the VEGA encounter orbits determined using VLBI data acquired by NASA's Deep Space Network to predict the location of Halley at Giotto encounter. This article describes the VLBI techniques used to determine the VEGA orbits and shows that the insensitivity of the VLBI data strategy to unmodeled dynamic error sources resulted in estimates of the VEGA orbits with an accuracy of 50 km.

Ellis, Jordan↗
NASA NTRS1988

Robust adaptive regulation without persistent excitation

A globally convergent adaptive regulator for minimum or nonminimum phase systems subject to bounded distrubances and unmodeled dynamics is presented. The control strategy is designed for a particular input-output representation obtained from the state space representation of the system. The leading coefficient of the new representation is the product of the observability and controllability matrices of the system. The controller scheme uses a Least Squares identification algorithm with a dead zone. The dead zone is chosen to obtain convergence properties on the estimates and on the covariance matrix as well. This allows the definition of modified estimates which secure well-conditioned matrices in the adaptive control law. Explicit bounds on the plant output are given.

Lozano-Leal, Rogelio↗
NASA NTRS1986

Averaging analysis for discrete time and sampled data adaptive systems

Earlier continuous time averaging theorems are extended to the nonlinear discrete time case. Theorems for the study of the convergence analysis of discrete time adaptive identification and control systems are used. Instability theorems are also derived and used for the study of robust stability and instability of adaptive control schemes applied to sampled data systems. As a by product, the effects of sampling on unmodeled dynamics in continuous time systems are also studied.

Fu, Li-Chen↗
NASA NTRS1988

Implementation of adaptive proximate time-optimal controllers

Following a review of the Proximate Time-Optimal Servomechanism (PTOS) and the adaptive version of PTOS (APTOS), implementation techniques are described which make both algorithms practical for discrete-time control of second-order plants with real roots. The double integrator plant and the real pole plus an integrator plant are both used as examples. The effects of unmodeled dynamics on the algorithms are discussed and illustrated by simulation and experiment.

Workman, M. L.↗
NASA NTRS1988

Robustness with real parametric and structured complex uncertainty

The problem of robust stability and performance in feedback control systems with n real (possibly related) uncertain parameters and structured unmodeled dynamics (the latter taking the form of m complex blocks dynamic uncertainties) is considered. A robustness margin rm is defined with respect to such model uncertainty structure and an algorithm is developed to compute it. Robust stability and performance are characterized in terms of r sub m or the structured singular value mu. An iterative procedure using the above algorithm is given to compute tight bounds on k sub m and mu. These bounds are exact for the case m = 3 or less.

Pena, Ricardo S. Sanchez↗
NASA NTRS1989

Stabilizing hierarchical compensation for locally controlled large flexible structures

A two-level hierarchical control strategy is proposed for large flexible space structures. The lower level consists of a set of local controllers. The higher level is a stabilizing compensator to account for any instabilities caused by controller-structure interaction with unmodeled dynamics. The advantage of this hierarchical strategy is that the lower level can be designed to meet the performance requirements, and the higher level can be designed independently to produce overall stability.

Das, B.↗
NASA NTRS1989

Robust adaptive regulation without persistent excitation

A globally convergent adaptive regulator for minimum- or nonminimum-phase systems subject to bounded disturbances and unmodeled dynamics is presented. The control strategy is designed for a particular input-output representation obtained from the state space representation of the system. The leading coefficient of the representation is the product of the observability and controllability matrices of the system. The controller scheme uses a Least-Squares identification algorithm a with dead zone. The dead zone is chosen to obtain convergence properties on the estimates and on the covariance matrix as well. This allows the definition of modified estimates which secure well-conditioned matrices in the adaptive control law. Explicit bounds on the plant output are given.

Lozano-Leal, Rogelio↗
NASA NTRS1990

Characteristic-Wave Approach Complements Modal Analysis

Aspects of estimation of unmodeled dynamics discussed. Report discusses solution of nonhomogeneous governing matrix equation for dynamics of short vibrational pulses propagating as characteristic waves in large structure. Applied to analyze response, to repeated pulses, of beam clamped at one end and free at other. Shows all qualitative characteristics occuring under arbitrary periodic excitations of beam and those of quasi-periodic excitations, in as much as such excitations obtained by linear superpositions of periodic excitations.

Zak, Michail↗
NASA NTRS1989

A methodology for formulating a minimal uncertainty model for robust control system design and analysis

In the design and analysis of robust control systems for uncertain plants, the technique of formulating what is termed an M-delta model has become widely accepted and applied in the robust control literature. The M represents the transfer function matrix M(s) of the nominal system, and delta represents an uncertainty matrix acting on M(s). The uncertainty can arise from various sources, such as structured uncertainty from parameter variations or multiple unstructured uncertainties from unmodeled dynamics and other neglected phenomena. In general, delta is a block diagonal matrix, and for real parameter variations the diagonal elements are real. As stated in the literature, this structure can always be formed for any linear interconnection of inputs, outputs, transfer functions, parameter variations, and perturbations. However, very little of the literature addresses methods for obtaining this structure, and none of this literature addresses a general methodology for obtaining a minimal M-delta model for a wide class of uncertainty. Since have a delta matrix of minimum order would improve the efficiency of structured singular value (or multivariable stability margin) computations, a method of obtaining a minimal M-delta model would be useful. A generalized method of obtaining a minimal M-delta structure for systems with real parameter variations is given.

Belcastro, Christine M.↗
NASA NTRS1988

Model based trajectory planning using preview

The control of manipulators is seen here as a two-level process. A method is described to convert information available at the programming level into trajectories suitable to be tracked by a servo control system. The goal of the servo is to absorb the unmodeled dynamics. Tracking accuracy will depend mainly on the acceleration demand of the nominal trajectory setpoint, in particular, the actuator output demand must remain bounded. Our scheme adaptively takes into consideration at the trajectory computation level the dynamics of the underlying system, dynamically available information acquired through sensors, various types of constraints, such as path accuracy, and manipulator optimization. This scheme is meant to be implemented on-line, to drive mechanical systems such as manipulators. It is developed in the context of a multi-manipulator programming and control environment for space applications developed as part of a collaborative effort between McGill University and the Jet Propulsion Laboratory.

Hayward, Vincent↗
NASA NTRS1991

On the formulation of a minimal uncertainty model for robust control with structured uncertainty

In the design and analysis of robust control systems for uncertain plants, representing the system transfer matrix in the form of what has come to be termed an M-delta model has become widely accepted and applied in the robust control literature. The M represents a transfer function matrix M(s) of the nominal closed loop system, and the delta represents an uncertainty matrix acting on M(s). The nominal closed loop system M(s) results from closing the feedback control system, K(s), around a nominal plant interconnection structure P(s). The uncertainty can arise from various sources, such as structured uncertainty from parameter variations or multiple unsaturated uncertainties from unmodeled dynamics and other neglected phenomena. In general, delta is a block diagonal matrix, but for real parameter variations delta is a diagonal matrix of real elements. Conceptually, the M-delta structure can always be formed for any linear interconnection of inputs, outputs, transfer functions, parameter variations, and perturbations. However, very little of the currently available literature addresses computational methods for obtaining this structure, and none of this literature addresses a general methodology for obtaining a minimal M-delta model for a wide class of uncertainty, where the term minimal refers to the dimension of the delta matrix. Since having a minimally dimensioned delta matrix would improve the efficiency of structured singular value (or multivariable stability margin) computations, a method of obtaining a minimal M-delta would be useful. Hence, a method of obtaining the interconnection system P(s) is required. A generalized procedure for obtaining a minimal P-delta structure for systems with real parameter variations is presented. Using this model, the minimal M-delta model can then be easily obtained by closing the feedback loop. The procedure involves representing the system in a cascade-form state-space realization, determining the minimal uncertainty matrix, delta, and constructing the state-space representation of P(s). Three examples are presented to illustrate the procedure.

Belcastro, Christine M.↗
NASA NTRS1992

On-line implementation of nonlinear parameter estimation for the Space Shuttle main engine

We investigate the performance of a nonlinear estimation scheme applied to the estimation of several parameters in a performance model of the Space Shuttle Main Engine. The nonlinear estimator is based upon the extended Kalman filter which has been augmented to provide estimates of several key performance variables. The estimated parameters are directly related to the efficiency of both the low pressure and high pressure fuel turbopumps. Decreases in the parameter estimates may be interpreted as degradations in turbine and/or pump efficiencies which can be useful measures for an online health monitoring algorithm. This paper extends previous work which has focused on off-line parameter estimation by investigating the filter's on-line potential from a computational standpoint. ln addition, we examine the robustness of the algorithm to unmodeled dynamics. The filter uses a reduced-order model of the engine that includes only fuel-side dynamics. The on-line results produced during this study are comparable to off-line results generated previously. The results show that the parameter estimates are sensitive to dynamics not included in the filter model. Off-line results using an extended Kalman filter with a full order engine model to address the robustness problems of the reduced-order model are also presented.

Buckland, Julia H.↗
NASA NTRS1993

Robust controller design for flexible structures using normalized coprime factor plant descriptions

Stabilization is a fundamental requirement in the design of feedback compensators for flexible structures. The search for the largest neighborhood around a given design plant for which a single controller produces closed-loop stability can be formulated as an H(sub infinity) control problem. The use of normalized coprime factor plant descriptions, in which the plant perturbations are defined as additive modifications to the coprime factors, leads to a closed-form expression for the maximum neighborhood boundary allowing optimal and suboptimal H(sub infinity) compensators to be computed directly without the usual gamma iteration. A summary of the theory on robust stabilization using normalized coprime factor plant descriptions is presented, and the application of the theory to the computation of robustly stable compensators for the phase version of the Control-Structures Interaction (CSI) Evolutionary Model is described. Results from the application indicate that the suboptimal version of the theory has the potential of providing the bases for the computation of low-authority compensators that are robustly stable to expected variations in design model parameters and additive unmodeled dynamics.

Armstrong, Ernest S.↗