Search NASA⌕ Search

SEARCH · Search NASA

Results for “V&V”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

CdSexTe1-x/CdTe Devices with Reduced Interface Recombination Through Novel Back Contacts and Group-V Doping

Since excellent carrier lifetimes and front interface electronic quality are now achieved, rear interface recombination can limit V OC in CdSexTe1-x/CdTe solar cells. Several back-contact structures for devices were fabricated using combinations of tellurium, aluminum oxide, amorphous silicon, and indium tin oxide (ITO). Time-resolved photoluminescence was used to characterize such structures. We show increasingly improved interface passivation through the subsequent use of aluminum oxide, amorphous silicon, and ITO. Additionally, we show that arsenic-doped absorbers form a more passive interface with numerous back contact structures.

aluminum oxide↗
DOE OSTI2021

FY2021 Progress Report on BISON Metallic Fuel Model Development and V&V Using EBR-II Legacy Data

In this report, the activities and achievements made by Argonne National Laboratory for the Nuclear Energy Advanced Modeling and Simulation (NEAMS) BISON code metallic fuel validation and verification project in FY2021 are summarized. The cladding degradation model based on the FCCI/CCCI wastage calculations has been developed and implemented into BISON. A comprehensive evaluation of the cladding degradation model was performed based on FIPD data of the IFR experiment X447. BISON objects were also developed to enable direct use of time-varying cladding outer surface temperature profile as temperature boundary conditions, which proved to provide more accurate temperature predictions for the metallic fuel pins irradiated in EBR-II. Additionally, a new BISON object was implemented to enable direct comparison between BISON predicted data and FIPD-based post-irradiation examination (PIE) results, which would significantly facilitate BISON metallic fuel verification and validation (V&V) activities. These new BISON-FIPD integration features were used in the establishment of a low-burnup fuel swelling evaluation framework as demonstration. The framework was successfully used to evaluate current fuel swelling models based on the IFR experiment X423.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

The ASC-V&V Program [Slides]

The fundamental goal of the ASC-V&V Program is to obtain a quantitative understanding of our customers’ needs and priorities, and use it to assess applicability of numerical models of physical phenomena to physics questions, sensitivity of physics questions to physical phenomena, fidelity of a numerical implementation to the theory, the bounds of validity of theories, fidelity and coverage of experimental data relative to regimes of interest for physics questions, in order to warn users of IC codes and PEM data when simulations may lead to unsupported conclusions, and provide estimates of uncertainties on figures of merit calculated by the simulations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Molecular structures of dissolved and colloidal As V –Fe III complexes and their roles in the mobilization of As V under strongly acidic conditions

The effect of high concentration of iron (Fe III ) on the speciation and mobility of arsenic (As) under strongly acidic conditions remains unclear. This work studied the redistribution and speciation of As V and Fe III at Fe/As molar ratio of 1–14 and pH 1.5–2.0 in the dissolved, colloidal, and solid phases. Results showed that the elevated Fe III induced the decomposition of the precipitated poorly crystalline ferric arsenate by forming dissolved (< 3 kDa) and colloidal (3 kDa–0.1 µm) As–Fe complexes. The fraction of particulate As (> 0.1 µm) decreased from 70–90% to less than 20% when the Fe/As molar ratio increased from 1 to 14. The particle size of the bulk samples decreased significantly with the increase of Fe III concentration. The FTIR results suggested that AsV in dissolved/colloidal As–Fe complexes dominantly occurred as HAsO 4 2– species. The EXAFS results indicated that each HAsO 4 2– coordinated with approximately two Fe atoms in dissolved/colloidal As–Fe complexes at Fe/As ≥ 2. Furthermore, the findings suggest that high aqueous Fe III concentration can promote the mobility of As by forming dissolved/colloidal Fe–As complexes in acidic waters, potentially accelerating As transport from source to downstream in acid mine drainage systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Large Single Crystals of V 1– x Mo x O 2 from a Two-Step Chemical Vapor Transport Synthesis

This article details the synthesis of single crystals with the chemical formulas V 1-x Mo x O 2 ( 0 ≤ x ≤ 0.6) using the chemical vapor transport method at high temperatures (850 to 950 °C). These compounds are of interest due to the special relationship between their structure and electronic properties. Understanding this relationship will help guide future efforts in designing energy-saving devices. While some of these compounds have been synthesized before, this is the first time their synthesis has been reported for such a wide range of compounds in the form of bulk single crystals. The single crystal form is required for detailed characterization of the compounds. The materials were characterized chemically and structurally in order to validate the precise chemical compositions that were reported. Characterization methods included x-ray diffraction, inductively-coupled plasma atomic emission spectroscopy, and electron dispersive spectroscopy. The synthesis method is tunable, and the introduction of multiple steps both overcome the previous chemical challenges precluding synthesis of high molybdenum content crystals and allow for the creation of larger single crystals that were otherwise possible. The crystals synthesized this way are suitable for specialized measurements for determining the precise physical properties and atomic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

𝐵 → 𝜌⁢ℓ⁢$\bar{v}$ Resonance Form Factors from 𝐵→ 𝜋⁢𝜋⁢ℓ⁢$\bar{v}$ in Lattice QCD

The decay 𝐵 → 𝜌⁢ℓ⁢$\bar{v}$ is an attractive process for determining the magnitude of the smallest Cabibbo-Kobayashi-Maskawa matrix element, |𝑉 𝑢⁢𝑏 |, and can provide new insights into the origin of the long-standing exclusive-inclusive discrepancy in determinations of this standard-model parameter. This requires a nonperturbative QCD calculation of the 𝐵 → 𝜌 form factors 𝑉, 𝐴 0 , 𝐴 1 , and 𝐴 12 . The unstable nature of the 𝜌 resonance has prevented precise lattice QCD calculations of these form factors to date. Here, we present the first lattice QCD calculation of the 𝐵 → 𝜌 form factors in which the 𝜌 is treated properly as a resonance in 𝑃-wave 𝜋⁢𝜋 scattering. To this end, we use the Lellouch-Lüscher finite-volume formalism to compute the 𝐵 → 𝜋⁢𝜋 form factors as a function of both momentum transfer and 𝜋⁢𝜋 invariant mass, and then analytically continue to the 𝜌 resonance pole. This calculation is performed with 2 + 1 dynamical quark flavors at a pion mass of approximately 320 MeV, and demonstrates a clear path toward results at the physical point.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

SBIR Phase I Final Technical Report MODULAR NEUTRON DETECTOR ARRAY FOR PROTEIN CRYSTALLOGRAPHY BEAM LINES Award Number DE-SC0024828 Prepared for U.S. Department of Energy, Office of Science, SC-1 For the Period July 22, 2024 – April 21, 2025 Report Date November 22, 2024 Submitted by Vivek V. Nagarkar, Ph.D., Principal Investigator Report Contributors Mr. Nicholas Anastasi, Dr. Charles Sosa, Dr. Jun Wang, Dr. Lakshmi Soundara Pandian and Dr. Vivek V. Nagarkar

Explore the source record for details and available documents.

Nagarkar, Vivek V.↗
DOE OSTI2020

Automated Construction of Potential Energy Surfaces Suitable to Describe van der Waals Complexes with Highly Excited Nascent Molecules: The Rotational Spectra of Ar–CS( v ) and Ar–SiS( v )

Some reactions produce extremely hot nascent products which nevertheless can form sufficiently long-lived van der Waals (vdW) complexes—with atoms or molecules from a bath gas—as to be observed via microwave spectroscopy. Theoretical calculations of such unbound resonance states can be much more challenging than ordinary bound-state calculations depending on the approach employed. One encounters not just the floppy, and perhaps multiwelled potential energy surface (PES) characteristic of vdWs complexes, but in addition, one must contend with excitation of the intramolecular modes and its corresponding influence on the PES. Straightforward computation of the (resonance) rovibrational levels of interest, involves the added complication of the unbound nature of the wave function, often treated with techniques such as introducing a complex absorbing potential. Here, we have demonstrated that a simplified approach of making a series of vibrationally effective PESs for the intermolecular coordinates—one for each reaction product vibrational quantum number of interest—can produce vdW levels for the complex with spectroscopic accuracy. This requires constructing a series of appropriately weighted lower-dimensional PESs for which we use our freely available PES-fitting code AUTOSURF. The applications of this study are the Ar–CS and Ar–SiS complexes, which are isovalent to Ar–CO and Ar–SiO, the latter of which we considered in a previously reported study. Using a series of vibrationally effective PESs, rovibrational levels and predicted microwave transition frequencies for both complexes were computed variationally. A series of shifting rotational transition frequencies were also computed as a function of the diatom vibrational quantum number. The predicted transitions were used to guide and inform an experimental effort to make complementary observations. Comparisons are given for the transitions that are within the range of the spectrometer and were successfully recorded. Calculations of the rovibrational level pattern agree to within 0.2% with experimental measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lithium vanadium oxide (Li 1.1 V 3 O 8 ) thick porous electrodes with high rate capacity: utilization and evolution upon extended cycling elucidated via operando energy dispersive X-ray diffraction and continuum simulation

The phase distribution of lithiated LVO in thick (~500 μm) porous electrodes (TPEs) designed to facilitate both ion and electron transport was determined using synchrotron-based operando energy dispersive X-ray diffraction (EDXRD). Probing 3 positions in the TPE while cycling at a 1C rate revealed a homogeneous phase transition across the thickness of the electrode at the 1st and 95th cycles. Additionally, continuum modelling indicated uniform lithiation across the TPE in agreement with the EDXRD results and ascribed decreasing accessible active material to be the cause of loss in delivered capacity between the 1st and 95th cycles. The model was supported by the observation of significant particle fracture by SEM consistent with loss of electrical contact. Overall, the combination of operando EDXRD, continuum modeling, and ex situ measurements enabled a deeper understanding of lithium vanadium oxide transport properties under high rate extended cycling within a thick highly porous electrode architecture.

25 ENERGY STORAGE↗