Search NASA⌕ Search

SEARCH · Search NASA

Results for “Variable Rate Fracturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Chlorite, Biotite, Illite, Muscovite, and Feldspar Dissolution Kinetics at Variable pH and Temperatures up to 280 C

Summary Sheet silicates and clays are ubiquitous in geothermal environments. Their dissolution is of interest because this process contributes to scaling reactions along fluid pathways and alteration of fracture surfaces, which could affect reservoir permeability. In order to better predict the geochemical impacts on long-term performance of engineered geothermal systems, we have measured chlorite, biotite, illite, and muscovite dissolution and developed generalized kinetic rate laws that are applicable over an expanded range of solution pH and temperature for each mineral. This report summarizes the rate equations for layered silicates where data were lacking for geothermal systems.

15 GEOTHERMAL ENERGY↗

Constraining Bedrock Groundwater Residence Times in a Mountain System With Environmental Tracer Observations and Bayesian Uncertainty Quantification

Groundwater residence time distributions provide fundamental insights on the hydrological processes within watersheds. Yet, observations that can constrain groundwater residence times over broad timescales remain scarce in mountain catchment studies. We use environmental tracers (CFC-12, SF 6 , 3 H, and 4 He) to investigate groundwater residence times along a hillslope in the East River Watershed, Colorado, USA. We develop a Bayesian inference framework that applies a Markov-chain Monte Carlo (MCMC) approach to estimate noble gas recharge temperature, elevation, and excess-air parameters and the resulting environmental tracer concentrations. MCMC is then used to propagate the environmental tracer uncertainties to estimates of groundwater mean residence times inferred with lumped parameter models. All samples contain 3 H, CFC-12, and SF 6 in addition to terrigenic 4 He, suggesting a mixture of water characterized by modern and premodern residence times. 4He exponential mean residence times range from hundreds of years at the upslope well to thousands of years at the toe-slope well assuming average crustal production rates. We find that binary mixing residence time distributions with separate young and old mixing fractions are needed to predict the 4 He, CFC-12, SF 6 , and 3 H observations, supporting the importance of flow path mixing in this bedrock system. Our findings that the fractured bedrock hosts groundwater with a mixture of residence times ranging from decades to millennia suggest variable recharge dynamics and flow path mixing along the hillslope and highlight the importance of characterizing groundwater systems with observations that are sensitive to transport over a broad range of residence times.

54 ENVIRONMENTAL SCIENCES↗

Influence of Microbial Membranes on Biofilm Formation, Scaling Reactions, and Production Chemistry in Engineered Energy Systems (Final Report)

Humans are engineering the deep subsurface for the purposes of energy-capture, energy-storage, and environmental mitigation. Despite the potential for microbial communities to significantly alter the effectiveness of these technologies, we have historically lacked a clear understanding of how microbial cells interact in a fractured shale system. Existing knowledge has been heavily based on genomic information, lacking studies on in situ physiologies, kinetic rates, and attachment mechanisms governing biogeochemical reactions in the system. The overarching goal of this research was to advance understanding of engineered hydrocarbon extraction systems as they evolve from newly developed environments to mature use. Plasma membranes protect microbial cells, mediate many critical functions, and respond to intracellular cues and ecological perturbations through physicochemical modifications. The project objectives were to 1) characterize variables influencing growth and membrane features of shale taxa, 2) characterize the interactions between shale matrices and microorganisms and 3) elucidate engineered and environmental processes driving biogeochemical signatures at the field scale. Objectives were realized through laboratory experiments involving growth of pure cultures and enrichments in continuous culture and biofilms; access to samples from two DOE-NETL funded energy-capture sites: Marcellus Shale Energy and Environmental Laboratory (MSEEL and MSEEL II); and through collaborations with scientists and engineers at the Environmental Molecular Science Laboratory (EMSL) and National Energy Technology Laboratory (NETL). Key findings showed (a) Halanaerobium congolense WG10 makes its membrane more fluid and thicker through increasing its polyunsaturated fatty acid (PUFA) composition under non-optimal salinities (7% and 20%) compared to the optimum (13% NaCl); (b) anionic phospholipids within the plasma membrane are important for high salinity tolerance in H. congolense WG10 while zwitterionic species modulate biofilm physiologies in both isolate and mixed cultures, and (c) tyrosine accumulation with overexpression of Na+/H+ antiporters are essential for osmoprotection in H. congolense WG10 under high salinity while upregulation of aromatic amino acid synthesis and cell envelope maintenance underpin biofilm formation. It is clear from these results that microbial persistence in fractured shale reservoirs under environmental and engineered perturbations requires strategic plasma membrane lipid chemistry adjustments and metabolic restructuring, with implications for improved shale microbiology management and more efficient hydrocarbon extraction approaches targeting microorganisms.

03 NATURAL GAS↗

Fracture Resistance of Cast Stainless Steels after Thermal Aging for up to 10000 Hours

This work package, Cast Stainless Steel Aging, aims to achieve a comprehensive scientific understanding on the aging and failure phenomena in cast austenitic stainless steels (CASSs) using holistic experimental and modeling means and to provide a practical and science-based model to predict the degree of thermal degradation of CASS components in extended-term operations. The test materials in the project include four model CASSs (CF3, CF3M, CF8, and CF8M), four EPRI-provided CASSs (CF3, two CF8s, and CF8M), and two reference wrought materials (304L and 316L), which contain a wide variety of d-ferrite contents (2–33%). These materials have been thermally aged at two light water reactor (LWR)-relevant temperatures (290 and 330°C) and at two accelerated-aging temperatures (360 and 400°C) for up to three years. In the fiscal year, the fracture toughness testing and J-R curve calculation were completed for the ten CASS and wrought materials aged up to 10,000 hours. This report is to present the results of the static fracture (J-R) testing for the model and EPRI-provided CASS materials after thermal aging up to 10,000 hours. First, a new aging parameter (A) was defined to present the aging degradation of mechanical properties against the common variable. This definition is used to scale an aging time at a temperature to the effective aging time at a reference temperature based on Arrhenius equation, which is a rate theory equation for thermally activated mechanisms.

36 MATERIALS SCIENCE↗

Controls on Barite (BaSO 4 ) Precipitation in Unconventional Reservoirs

Barite (BaSO 4 ) precipitation is one of the most ubiquitous examples of secondary sulfate mineral scaling in shale oil and gas reservoirs. Often, a suite of chemical additives is used during fracturing operations to inhibit the accumulation of mineral scales, though their efficacy is widely varied and poorly understood. This study combines experimental data and multi-component numerical reactive transport modeling to offer a more comprehensive understanding of the geochemical behavior of barite accumulation in shale matrices under conditions typical of fracturing operations. A variety of additives and conditions are individually tested in batch reactor experiments to identify the factors controlling barite precipitation. Our experimental results demonstrate a pH dependence in the rate of barite precipitation, which we use to develop a predictive model including a pH-dependent term that satisfactorily reproduces our observations. Further, this model is then extended to consider the behavior of three major shale samples of highly variable mineralogy (Eagle Ford, Marcellus, and Barnett). This data-validated model offers a reliable tool to predict and ultimately mitigate against secondary mineral accumulation in unconventional shale reservoirs.

54 ENVIRONMENTAL SCIENCES↗

Bayesian calibration and uncertainty quantification of a rate-dependent cohesive zone model for polymer interfaces

In this work we present a rate-dependent cohesive zone model for the fracture of polymeric interfaces and performs a Bayesian calibration, an uncertainty quantification, and a sensitivity analysis for the model. The proposed cohesive zone model accounts for both reversible elastic and irreversible rate-dependent separation sliding deformation at the interface. The viscous dissipation due to the irreversible opening at the interface is modeled using elastic-viscoplastic kinematics that incorporates the effects of strain rate. Inverse calibration of parameters for such complex models through trial and error is challenging due to the large number of parameters of the model. Moreover, the calibrated parameter values are often non-unique and uncertain when the available experimental data is limited. To tackle this challenge, we employ a Bayesian calibration approach to identify parameters from experimental data, the resulting parameters significantly enhance the accuracy of the model. To quantify the uncertainty associated with the inverse parameter estimation, a modular Bayesian approach is employed to calibrate the unknown model parameters, accounting for the parameter uncertainty of the cohesive zone model. The advantages of the Bayesian calibration over a deterministic parameter fit are demonstrated. Further, to quantify the model uncertainties, such as incorrect assumptions or missing physics, a discrepancy function is introduced, which significantly improves the model’s prediction. Finally, the total uncertainty of the model is quantified in a predictive setting. A sensitivity analysis is performed to assess how changes in the input variables of the model affect the peak load, facilitating the identification of a concise set of highly influential parameters. The present approach can be used for calibration and uncertainty quantification for other complex computational mechanics models. It should also facilitate the designing of interface materials under uncertainty.

42 ENGINEERING↗

Wide-range simulation of elastoplastic wave fronts and failure of solids under high-speed loading

The aim of this paper is numerical study of deformation processes and failure of vanadium under shock-wave loading. According developed statistical theory of solid with mesoscopic defects the constitutive equations were proposed in terms of two structural variables characterizing behavior of defects ensembles: defect density tensor and structural scaling parameter. On the basis of wide-range constitutive equations the mathematical model of deformation behavior and failure of vanadium was developed taking into account the bond relaxation mechanisms, multistage of fracture and nonlinearity kinetic of defects. Results of numerical simulation allow the description of the major effects of shock wave propagation (elastic precursor decay, grow of spall strength under grow strain rate)

42 ENGINEERING↗

Phase-field modeling and experiments of dynamic fracture in single crystal quartz

Predicting the onset and characteristics of brittle fracture is important for a wide range of engineering and geological material applications. In this paper, we study important aspects of brittle fracture in α-quartz by phase-field modeling and experiments using a top-down approach. In the modeling framework, the work term in the Griffith energy balance is replaced with internal energy contributions that represent surface energy, thermal energy, and elastic strain energy stored in defects. This allows parametrization of individual energy contributions in terms of internal state variables and keeps track of energy partitioning after the onset of fracture. The path and history dependence of fracture is included in evolution laws for internal state variables, e.g., entropy evolution, while the energy remains a true potential. In the experimental part, dynamic compression experiments coupled with X-ray phase contrast imaging are performed on cube-like samples with a hole. In the top-down analysis, dynamic compression and three point bending experiments from the literature are simulated with the developed phase-field damage model. In conclusion, the fitted model highlights the strain rate, size, and stress state dependence of damage nucleation and evolution in single crystal α-quartz.

36 MATERIALS SCIENCE↗

Dynamic development of geochemical reaction fronts during hydraulic stimulation of shale

Injection of acidic hydraulic fracture fluid (HFF) into shale formations for unconventional oil/gas production results in chemical reactions in the shale matrix that can alter fluid transport. Here, we report the results of set of experiments designed to evaluate the impact of calcite dissolution as a function of carbonate mineral content on matrix chemical reactivity and pore-space modification concomitant with imbibition. In this study, we tracked acidic HFF transport in four samples of Wolfcamp shale with calcite contents varying from 4% to 59% by monitoring the rate and spatial extent of bromide tracer transport using synchrotron-based X-ray fluorescence microprobe (XFM) imaging. Concurrently, we also carried out XFM imaging of the spatial distribution of Ca in the Wolfcamp shale cores (as a proxy of calcite distribution). Our approach thus yields a direct record of time-resolved selective ion transport resulting from the penetration of acidic HFF and the associated mineral transformations in the shale cores. We show that the variability in calcite content of Wolfcamp shale samples can directly affect the rate and spatial extent of imbibition. Although reaction of the acidic HFF with carbonates in shales enhances calcite dissolution and increases porosity, the spatial extent of calcite dissolution in the shale matrix is limited due to a rapid neutralization of pH. The relative abundance and spatial distribution of calcite control the chemical saturation state of the HFF progressing into the matrix. As a result, calcite has a major impact on the spatial extent and rate of matrix alteration and thus on HFF transport during subsurface reservoir stimulation. Consequently, increased calcite content in the shale matrix inhibits the spatial extent of the pore-volume increase and, by extension, the spatial extent and rate of imbibition. Our results thus show that the overall rates of calcite dissolution approach the rates of acidic HFF transport (i.e., Damköhler number ~1), which could contribute to the efficiency of subsurface reservoir stimulation. A better understanding of HFF-calcite reaction rates is crucial for improving the prediction and optimization of fluid transport across HFF-shale interfaces during hydraulic fracturing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Minimizing exposure to legacy wells and avoiding conflict between storage projects: Exploring area of review as a screening tool

Elevated pressure from large-volume injection is a key driver of risk and project cost. If transmissive features (e.g., non-isolating wells or fracture systems) are present, increased injection-zone pressure can drive fluids from depth toward protected freshwater resources. In US Carbon Capture and Storage (CCS) law, the area at risk is known as the Area of Review (AoR). The size and number of potentially transmissive features to be evaluated and possibly remediated or managed is a function of the size and location of the AoR. The size of the AoR depends on several variables, including properties of the injection zone, properties of protected resources, and injection rate and duration. Evaluation of the intersection of these variables across a portfolio of sites highlights the injection zone depth and boundary conditions as top-level controls. Deep injection, use of multiple stacked injection zones, reduced injection rate and choice of injection well location can all be used to minimize AoR and the number of potentially transmissive features within it. Here, we introduce the concept of pressure space (defined as connected pore volume times pressure) as the key subsurface commodity for CO 2 storage and we suggest that it forms a more robust basis for leasing and regulation than pore space alone.

58 GEOSCIENCES↗

Survey of four damage models for concrete.

Four conventional damage plasticity models for concrete, the Karagozian and Case model (K&C), the Riedel-Hiermaier-Thoma model (RHT), the Brannon-Fossum model (BF1), and the Continuous Surface Cap Model (CSCM) are compared. The K&C and RHT models have been used in commercial finite element programs many years, whereas the BF1 and CSCM models are relatively new. All four models are essentially isotropic plasticity models for which 'plasticity' is regarded as any form of inelasticity. All of the models support nonlinear elasticity, but with different formulations. All four models employ three shear strength surfaces. The 'yield surface' bounds an evolving set of elastically obtainable stress states. The 'limit surface' bounds stress states that can be reached by any means (elastic or plastic). To model softening, it is recognized that some stress states might be reached once, but, because of irreversible damage, might not be achievable again. In other words, softening is the process of collapse of the limit surface, ultimately down to a final 'residual surface' for fully failed material. The four models being compared differ in their softening evolution equations, as well as in their equations used to degrade the elastic stiffness. For all four models, the strength surfaces are cast in stress space. For all four models, it is recognized that scale effects are important for softening, but the models differ significantly in their approaches. The K&C documentation, for example, mentions that a particular material parameter affecting the damage evolution rate must be set by the user according to the mesh size to preserve energy to failure. Similarly, the BF1 model presumes that all material parameters are set to values appropriate to the scale of the element, and automated assignment of scale-appropriate values is available only through an enhanced implementation of BF1 (called BFS) that regards scale effects to be coupled to statistical variability of material properties. The RHT model appears to similarly support optional uncertainty and automated settings for scale-dependent material parameters. The K&C, RHT, and CSCM models support rate dependence by allowing the strength to be a function of strain rate, whereas the BF1 model uses Duvaut-Lion viscoplasticity theory to give a smoother prediction of transient effects. During softening, all four models require a certain amount of strain to develop before allowing significant damage accumulation. For the K&C, RHT, and CSCM models, the strain-to-failure is tied to fracture energy release, whereas a similar effect is achieved indirectly in the BF1 model by a time-based criterion that is tied to crack propagation speed.

36 MATERIALS SCIENCE↗

Anodic Interfacial Evolution in Extremely Fast Charged Lithium-Ion Batteries

Interfacial reaction mechanisms at the anode/separator interface play a central role in the performance and safety of lithium-ion batteries during fast charging. We report a mechanistic study on the evolution and interactions of the aging mechanisms at the anode/separator interface in lithium cobalt oxide/graphite pouch cells charged with variable charging rates (1–6C) over 10 cycles. In situ electrochemical measurements, including voltage relaxation, Coulombic efficiency, and direct current internal resistance, indicated an incremental lithium loss until the C rates were ≤5C. A substantial capacity fade is observed in the first few cycles of fast charging, but the magnitude of capacity fade progressively diminishes with the number of cycles, indicating a suppression in the lithium deposition mechanism. Post-mortem film thickness, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) analyses were performed to elucidate the evolution of electrolyte decomposition, the solid–electrolyte interface (SEI), lithium plating, and film fracture mechanisms with C rate. XPS measurements confirmed an increasing lithium concentration in an SEI film with an increase in the C rate. SEM images showed a growth of dendritic lithium on the anode surface from 1C to 3C. Precrack formation leading to an interfacial film fracture was observed at higher C rates. Furthermore, a differential analysis of the discharge capacity indicated a possible two-phase delithiation from the anode and reduced cathodic lithiation due to lithium loss at high C rates.

36 MATERIALS SCIENCE↗

Mortality and injury assessment for three species of fish exposed to simulated turbine blade strike

Injury and mortality of fish during downstream passage through hydropower turbines is among the leading direct impacts of hydropower. Understanding the relationships among various strike variables and injury and mortality rates are necessary for improvements in turbine design. We subjected three species of fish to simulated blade strike in laboratory studies with different blade thicknesses, impact velocities, and body orientations to develop relationships between these variables and probability of injury and mortality. Midbody strikes resulted in higher mortality than head strikes, and tail strikes produced the least mortality. Lateral strikes caused more mortality than dorsal and ventral strikes, and higher strike velocities and thinner blades contributed to increased mortality. Several injury types were significantly associated with increased mortality, including injuries to the operculum, gills, viscera, heart, liver, swim bladder, muscle, and bone fractures. Here, the results from this study will be used to define biologically based design criteria that can be used by turbine designers to improve designs (e.g., increased leading-edge thickness and slower turbine speeds) to minimize the probability and impact of blade strike.

60 APPLIED LIFE SCIENCES↗

Energy Intensity and Greenhouse Gas Emissions from Tight Oil Production in the Bakken Formation

The Bakken formation has contributed to the recent rapid increase in U.S. oil production, reaching a peak production of >1.2 × 106 barrels per day in early 2015. In this study, we estimate the energy intensity and greenhouse gas (GHG) emissions from 7271 Bakken wells drilled from 2006 to 2013. We model energy use and emissions using the Oil Production Greenhouse Gas Emissions Estimator (OPGEE) model, supplemented with an open-source drilling and fracturing model, GHGfrack. Overall well-to-refinery-gate (WTR) consumption of natural gas, diesel, and electricity represent 1.3%, 0.2%, and 0.005% of produced crude energy content, respectively. Fugitive emissions are modeled for a “typical” Bakken well using previously published results of atmospheric measurements. Flaring is a key driver of emissions: wells that flared in 2013 had a mean flaring rate that was ≈500 standard cubic feet per barrel or ≈14% of the energy content of the produced crude oil. Resulting production-weighted mean GHG emissions in 2013 were 10.2 g of CO2 equivalent GHGs per megajoule (henceforth, gCO2eq/MJ) of crude. Between-well variability gives a 5–95% range of 2–28 gCO2eq/MJ. If flaring is completely controlled, Bakken crude compares favorably to conventional U.S. crude oil, with 2013 emissions of 3.5 gCO2eq/MJ for nonflaring wells, compared to the U.S. mean of ≈8 gCO2eq/MJ.

Brandt, Adam R.↗

Evolution of microstructure and strength of a high entropy alloy undergoing the strain-induced martensitic transformation

In a recent work, we have reported outstanding strength and work hardening exhibited by a metastable high entropy alloy (HEA), Fe 42 Mn 28 Co 10 Cr 15 Si 5 (in at. %), undergoing the strain-induced martensitic transformation from metastable gamma austenite (γ) to stable epsilon martensite (ε). However, the alloy exhibited poor ductility, which was attributed to the presence of the brittle sigma (σ) phase in its microstructure. The present work reports the evolution of microstructure, strength, and ductility of a similar HEA, Fe 38.5 Mn 20 Co 20 Cr 15 Si 5 Cu 1.5 (in at. %), designed to suppress the formation of σ phase. A cast and then rolled plate of the alloy was processed into four conditions by annealing for 10 and 30 min at 1100 °C and by friction stir processing (FSP) at tool rotation rates of 150 and 400 revolutions per minute (RPM) to facilitate detailed examinations of variable initial grain structures. Neutron diffraction and electron microscopy were employed to characterize the microstructure and texture evolution. The initial materials had variable grain size but nearly 100% γ structure. Diffusionless strain induced γ→ε phase transformation took place under compression with higher rate initially and slower rate at the later stages of deformation, independent on the initial grain size. The transformation facilitated part of plastic strain accommodation and rapid strain hardening owing to a transformation-induced dynamic Hall-Petch-type barrier effect, increase in dislocation density, and texture. Here, the peak strength of nearly 2 GPa was achieved under compression using the structure created by double pass FSP (150 RPM followed by 150 RPM). Remarkably, the tensile elongation exhibited by the alloy was nearly 20% with fracture surfaces featuring a combination of ductile dimples and cleavage.

36 MATERIALS SCIENCE↗

A degradation function consistent with Cocks–Ashby porosity kinetics

Here, the load carrying capacity of ductile materials degrades as a function of porosity, stress state and strain-rate. The effect of these variables on porosity kinetics is captured by the Cocks–Ashby model; however, the Cocks–Ashby model does not account for material degradation directly. This work uses a yield criteria to form a degradation function that is consistent with Cocks–Ashby porosity kinetics and is a function of porosity, stress state and strain-rate dependence. Approximations of this degradation function for pure hydrostatic stress states are also explored.

36 MATERIALS SCIENCE↗

The importance of parameter variances, correlations lengths, and cross-correlations in reactive transport models: key considerations for assessing the need for microscale information

A process-oriented modeling approach is implemented to examine the importance of parameter variances, correlation lengths, and especially cross-correlations in contaminant transport predictions over large scales. It is shown that the most important consideration is the correlation between flow rates and retardation processes (e.g., sorption, matrix diffusion) in the system. lf flow rates are negatively correlated with retardation factors in systems containing multiple flow pathways, then characterizing these negative correlation(s) may have more impact on reactive transport modeling than microscale information. Such negative correlations are expected in porous-media systems where permeability is negatively correlated with clay content and rock alteration (which are usually associated with increased sorption). Likewise, negative correlations are expected in fractured rocks where permeability is positively correlated with fracture apertures, which in turn are negatively correlated with sorption and matrix diffusion. Parameter variances and correlation lengths are also shown to have important effects on reactive transport predictions, but they are less important than parameter cross-correlations. Microscale information pertaining to contaminant transport has become more readily available as characterization methods and spectroscopic instrumentation have achieved lower detection limits, greater resolution, and better precision. Obtaining detailed mechanistic insights into contaminant-rock-water interactions is becoming a routine practice in characterizing reactive transport processes in groundwater systems (almost necessary for high-profile publications). Unfortunately, a quantitative link between microscale information and flow and transport parameter distributions or cross-correlations has not yet been established. One reason for this is that quantitative microscale information is difficult to obtain in complex, heterogeneous systems. So simple systems that lack the complexity and heterogeneity of real aquifer materials are often studied. Another is that instrumentation used to obtain microscale information often probes only one variable or family of variables at a time, so linkages to other variables must be inferred by indirect means from other lines of evidence. Despite these limitations, microscale information can be useful in the development and validation of reactive transport models. For example, knowledge of mineral phases that have strong affinities for contaminants can help in the development of cross-correlations between flow and sorption parameters via characterization of permeability and mineral distributions in aquifers. Likewise, microscale information on pore structures in low-permeability zones and contaminant penetration distances into these zones from higher-permeability zones (e.g., fractures) can provide valuable constraints on the representation of diffusive mass transfer processes between flowing porosity and secondary porosity. The prioritization of obtaining microscale information in any groundwater system can be informed by modeling exercises such as those conducted for this study.

54 ENVIRONMENTAL SCIENCES↗

An anisotropic damage model based on dislocation-mediated nucleation of cracks under high-rate compression

In this report, we developed a thermodynamically-consistent, rate-dependent micromechanics model for brittle damage nucleated by dislocation plasticity applicable for large deformations. Dislocation substructure evolution was used to inform a nucleation criterion for a microcrack. Under global compression, the sliding of a microcrack induces formation of wing cracks. Effective stress drives dynamic growth of these cracks under a 3D stress state, resulting in an anisotropic material stiffness. The model was also advanced to predict grain size dependence of a polycrystalline solid. Internal variables were constrained based on the laws of thermodynamics. Material constants were calibrated for polycrystalline beryllium to demonstrate the applicability of the model to simulate dynamic failure under compression. We demonstrate the versatility of the model to capture brittle to ductile transition governed by temperature and strain rate. The predictive capability of the model to simulate failure stress and failure strain is compared with dynamic and quasistatic data on beryllium.

36 MATERIALS SCIENCE↗