Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water Splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Investigation of Pristine and (Mo, W)-Doped Cu 11 V 6 O 26 for Use as Photoanodes for Solar Water Splitting

The development of new and inexpensive semiconductor electrodes that possess suitable bandgap energies and band positions for solar water splitting is of great interest in the field of solar fuel production. In this study, n-type Cu 11 V 6 O 26 that has a bandgap energy of 1.9 eV was produced as a pure, high quality photoanode and its properties and stability for photoelectrochemical water splitting were systematically investigated in pH 9.2 and pH 13 solutions. As Cu 11 V 6 O 26 photoanodes appeared to suffer from poor charge transport properties, Mo and W-doping into the V site were also examined, which considerably improved the photocurrent generation of Cu 11 V 6 O 26 . Furthermore, the bandgap energy, band edge positions, flatband potential, photocurrent generation, and photostability of pristine and doped Cu 11 V 6 O 26 electrodes are discussed in comparison to elucidate the effect of Mo- and W-doping and to evaluate the promise and limitations of Cu 11 V 6 O 26 as a photoanode for use in a water splitting photoelectrochemical cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Mapping of Band Positions in Doped and Undoped Hematite during Photoelectrochemical Water Splitting

Photoelectrochemical water splitting is a promising pathway for the direct conversion of renewable solar energy to easy to store and use chemical energy. The performance of a photoelectrochemical device is determined in large part by the heterogeneous interface between the photoanode and the electrolyte, which we here characterize directly under operating conditions using interface-specific probes. Utilizing X-ray photoelectron spectroscopy as a noncontact probe of local electrical potentials, we demonstrate direct measurements of the band alignment at the semiconductor/electrolyte interface of an operating hematite/KOH photoelectrochemical cell as a function of solar illumination, applied potential, and doping. Here, we provide evidence for the absence of in-gap states in this system, which is contrary to previous measurements using indirect methods, and give a comprehensive description of shifts in the band positions and limiting processes during the photoelectrochemical reaction.

14 SOLAR ENERGY↗

Progress on ternary oxide-based photoanodes for use in photoelectrochemical cells for solar water splitting

Solar water splitting using photoelectrochemical cells (PECs) has emerged as one of the most promising routes to produce hydrogen as a clean and renewable fuel source. Among various semiconductors that have been considered as photoelectrodes for use in PECs, oxide-based photoanodes are particularly attractive because of their stability in aqueous media in addition to inexpensive and facile processing compared to other types of semiconductors. However, they typically suffer from poor charge carrier separation and transport. In the past few years, there has been tremendous progress in developing ternary oxide-based photoelectrodes, specifically, photoanodes. The use of ternary oxides provides more opportunities to tune the composition and electronic structure of the photoelectrode compared to binary oxides, thus providing more freedom to tune the photoelectrochemical properties. In this article, we outline the important characteristics to analyze when evaluating photoanodes and review the major recent progress made on the development of ternary oxide-based photoanodes. For each system, we highlight the favorable and unfavorable features and summarize the strategies utilized to address the challenges associated with each material. Finally, by combining our analyses of all the photoanodes surveyed in this review, we provide possible future research directions for each compound and an outlook for constructing more efficient oxide-based PECs. Overall, this review will provide a critical overview of current ternary oxide-based photoanodes and will serve as a platform for the design of future oxide-based PECs.

25 ENERGY STORAGE↗

Structural basis of photosynthetic water-splitting

Photosynthetic water-splitting takes place in photosystem II (PSII), a membrane protein complex consisting of 20 subunits with an overall molecular mass of 350 kDa. The light-induced water-splitting reaction catalyzed by PSII not only converts light energy into biologically useful chemical energy, but also provides us with oxygen indispensible for sustaining oxygenic life on the earth. We have solved the structure of PSII at a 1.9 Å resolution, from which, the detailed structure of the Mn{sub 4}CaO{sub 5}-cluster, the catalytic center for water-splitting, became clear. Based on the structure of PSII at the atomic resolution, possible mechanism of light-induced water-splitting was discussed.

60 APPLIED LIFE SCIENCES↗

Role of Interfaces in Two-Dimensional Photocatalyst for Water Splitting

Here, we report hydrogen generation from the direct splitting of water by photocatalysis is regarded as a promising and renewable solution for the energy crisis. The key to realize this reaction is to find an efficient and robust photocatalyst that ideally makes use of the energy from sunlight. Recently, due to the attractive properties such as appropriate band structure, ultrahigh specific surface area, and more exposed active sites, two-dimensional (2D) photocatalysts have attracted significant attention for photocatalytic water splitting. This Review attempts to summarize recent progress in the fabrication and applications of 2D photocatalysts including graphene-based photocatalysts, 2D oxides, 2D chalcogenides, 2D carbon nitride, and some other emerging 2D materials for water splitting. The construction strategies and characterization techniques for 2D/2D photocatalysts are summarized. Particular attention has been paid to the role of 2D/2D interfaces in these 2D photocatalysts as the interfaces and heterojunctions are critical for facilitating charge separation and improving photocatalysis efficiency. We also critically discuss their stability as photocatalysts for water splitting. Lastly, we highlight the ongoing challenges and opportunities for the future development of 2D photocatalysts in this exciting and still emerging area of research.

08 HYDROGEN↗

Visualizing Overall Water Splitting on Single Microcrystals of Phosphorus-Doped BiVO 4 by Photo-SECM

Particulate bismuth vanadate (BiVO4) has attracted considerable interest as a promising photo(electro)catalyst for visible-light-driven water oxidation, however, overall water splitting (OWS) has been difficult to attain because its conduction band is too positive for efficient hydrogen evolution. Using photo-scanning electrochemical microscopy (photo-SECM) with a chemically modified nanotip, we visualized for the first time the OWS at a single truncated bipyramidal microcrystal of phosphorus-doped BiVO 4 . The tip simultaneously served as a light guide to illuminate the photocatalyst and as an electrochemical nanoprobe to observe and quantitatively measure local oxygen and hydrogen fluxes. The obtained current patterns for both O 2 and H 2 agree well with the accumulation of photogenerated holes and electrons on {010} basal and {110} lateral facets, respectively. Furthermore, the developed experimental approach is an important step towards nanoelectrochemical mapping of the activity of photocatalyst particles at the sub-facet level.

bismuth vanadate↗

One of the Substrate Waters for O 2 Formation in Photosystem II Is Provided by the Water-Splitting Mn 4 CaO 5 Cluster’s Ca 2+ Ion

During the catalytic step immediately prior to O–O bond formation in Photosystem II, a water molecule deprotonates and moves next to the water-splitting Mn 4 CaO 5 cluster’s O5 oxo bridge. Considerable evidence identifies O5 as one of the two substrate waters that ultimately form O 2 . The relocated oxygen, known as O6 or Ox, may be the second. It is currently debated whether O6 or Ox originates as the Mn-bound water denoted W2 or as the Ca 2+ -bound water denoted W3. To distinguish between these two possibilities, we analyzed the D–O–D bending mode of the water molecule that deprotonates/relocates to become O6/Ox. Here, we show that this D–O–D bending mode is not altered by the D1-S169A mutation. Previously, we showed that this D–O–D bending mode is altered substantially when Sr 2+ is substituted for Ca 2+ . Because Sr 2+ /Ca 2+ substitution alters this D–O–D bending mode but the D1-S169A mutation does not, we conclude that the water-derived oxygen that relocates and becomes O6/Ox derives from the Ca 2+ -bound W3. This conclusion provides an important constraint for proposed mechanisms of O–O bond formation in Photosystem II.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical limits of multiple exciton generation and singlet fission tandem devices for solar water splitting

Photoelectrochemical (PEC) water splitting is one of the most important approaches being investigated for solar fuel generation. In this study, we determine the maximum thermodynamic power conversion efficiencies (PCEs) of PEC water splitting two-bandgap tandem devices that produce multiple carriers per photon absorbed via Multiple Exciton Generation (MEG) or Singlet Fission (SF) and in the presence of solar concentration. Here, we employ a detailed balance thermodynamic analysis to determine the effects of top cell thickness, solar concentration, carrier multiplication, electrode overvoltage (VO), and water absorption on PEC power conversion efficiency for water splitting cells. We have found a maximum PEC power conversion efficiency of 62.9% in cells using two ideal tandem MEG absorbers with bandgaps of 0.3 and 1.2 eV at 1000-suns solar concentration and 0 overvoltage; the maximum PCE for two tandem SF absorbers under the same conditions is nearly the same at 59% with the same values for the absorption thresholds. A very interesting and important result was that, upon thinning the top cell, the range of viable bandgaps for both the top and bottom cells is extended by as much as 0.5-1 eV while still maintaining high maximum conversion efficiency (60-63%). The effects of imposing different solar concentrations from 1X to 1000X and having different tandem configurations of SF and MEG layers were also studied.

14 SOLAR ENERGY↗

Enhancing Mo:BiVO 4 Solar Water Splitting with Patterned Au Nanospheres by Plasmon-Induced Energy Transfer [Rational Nanopositioning for BiVO 4 Solar Water Splitting by Plasmon-induced Energy Transfer]

Here, plasmonic metal nanostructures have been extensively investigated to improve the performance of metal oxide photoanodes for photoelectrochemical (PEC) solar water splitting cells. Most of these studies have focused on the effects of those metal nanostructures on enhancing light absorption and enabling direct energy transfer via hot electrons. However, several recent studies have shown that plasmonic metal nanostructures can improve the PEC performance of metal oxide photoanodes via another mechanism known as plasmon–induced resonant energy transfer (PIRET). However, this PIRET effect has not yet been tested for the molybdenum–doped bismuth vanadium oxide (Mo:BiVO 4 ), regarded as one of the best metal oxide photoanode candidates. Here, this study constructs a hybrid Au nanosphere/Mo:BiVO 4 photoanode interwoven in a hexagonal pattern to investigate the PIRET effect on the PEC performance of Mo:BiVO 4 . This study finds that the Au nanosphere array not only increases light absorption of the photoanode as expected, but also improves both its charge transport and charge transfer efficiencies via PIRET, as confirmed by time–correlated single photon counting and transient absorption studies. As a result, incorporating the Au nanosphere array increases the photocurrent density of Mo:BiVO 4 at 1.23 V versus RHE by ≈2.2–fold (2.83 mA cm –2 ).

36 MATERIALS SCIENCE↗

Wide Band Gap CuGa(S,Se) 2 Thin Films on Transparent Conductive Fluorinated Tin Oxide Substrates as Photocathode Candidates for Tandem Water Splitting Devices

Theaim of this report was to explore the potential of CuGa(S,Se)2 thin films as wide-E G top cell absorbers for photoelectrochemical (PEC) water splitting. A synthesis was developed on fluorinated tin oxide (FTO) photocathodes by converting copper-rich co-evaporated CuGaSe2 into CuGa(S,Se)2 via a post-deposition annealing. We found it necessary to first anneal CuGaSe2 at low-temperature in sulfur then at high-temperature in nitrogen to preserve the transparency and conductivity of the FTO. Using this two-step synthesis, we fabricated a 1.72eV CuGa(S,Se) 2 photocathode with a saturation current density and photocurrent onset potential of 10mA/cm 2 and -0.20V vs. RHE, respectively. Yet we found that the PEC performance and sub-E G transmittance, worsened with increasing copper content. Using flatband potential measurements and the Gerischer model, we show that divergences in PEC performance of CuGa(S,Se) 2 photocathodes can be explained by differences in conduction band minimums and Fermi levels. We also explain that sub-E G transmittance is likely hampered by a defect band 100-400 meV below E C . Additional external quantum efficiency measurements of a high-efficiency 1.1 eV Cu(In,Ga)Se 2 photovoltaic driver, while shaded by the CuGa(S,Se) 2 photocathode, yielded a short-circuit current density of 4.14 mA/cm 2 revealing that CuGa(S,Se) 2 reflects promise as a top cell for PEC water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum Theory of Semiconductor Photo-Catalysis and Solar Water Splitting / Theory and Computation for Semiconductor Catalysis of Solar Water Splitting / Static and Dynamic Thermal Effects in Solids. Final Report

This is the final report. The finished research was published in 27 journal papers listed below. The topics fall roughly into seven categories: Photochemistry of water at the GaN ($10\bar{1}0$) surface; Quasiparticles: Band electrons and Anharmonic phonons; Quasiharmonic theory; Anharmonic lattice thermal conductivity; Water and Ice; Electron-phonon effects; and, Alloy theory.

36 MATERIALS SCIENCE↗

Thin film photoelectrodes for solar water splitting

Photoelectrochemical (PEC) water splitting has been intensively studied in the past decades as a promising method for large-scale solar energy storage. Among the various issues that limit the progress of this field, the lack of photoelectrode materials with suitable properties in all aspects of light absorption, charge separation and transport, and charge transfer is a key challenge, which has attracted tremendous research attention. A large variety of compositions, in different forms, have been tested. This review aims to summarize efforts in this area, with a focus on materials-related considerations. Issues discussed by this review include synthesis, optoelectronic properties, charge behaviors and catalysis. In the recognition that thin-film materials are representative model systems for the study of these issues, we elected to focus on this form, so as to provide a concise and coherent account on the different strategies that have been proposed and tested. Because practical implementation is of paramount importance to the eventual realization of using solar fuel for solar energy storage, we pay particular attention to strategies proposed to address the stability and catalytic issues, which are two key factors limiting the implementation of efficient photoelectrode materials. To keep the overall discussion focused, all discussions were presented within the context of water splitting reactions. Finally, how the thin-film systems may be applied for fundamental studies of the water splitting chemical mechanisms and how to use the model system to test device engineering design strategies are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗