Search NASA⌕ Search

SEARCH · Search NASA

Results for “Well Performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Irradiation performance of a U-7Mo in Al-Si matrix dispersion full-size fuel plate assembly

The Korea Atomic Energy Research Institute (KAERI) is leading the Ki-Jang Research Reactor (KJRR) project with the intent to develop a new reactor for medical isotope production and other nuclear research purposes. The KJRR core is designed to use high density fuel system where uranium alloyed with 7 wt% molybdenum (U-7Mo) particles are dispersed in a matrix of aluminum alloyed with 5 wt% silicon (Al-5Si) and clad in aluminum alloy 6061 (Al-6061) to form fuel plates. KAERI developed a fabrication facility to construct KJRR fuel assemblies and partnered with the Idaho National Laboratory (INL) to irradiate a full-size fuel assembly, with 21 total fuel plates, in the Advanced Test Reactor (ATR). Irradiation testing and subsequent Post Irradiation Exam (PIE) campaigns were performed successfully over a multi-year project. Monte Carlo neutronic calculations, coupling with a depletion code, were performed based on ATR’s as-run power history which showed that the highest power plate (plate 20) reached 83.1 % end-of-life (EOL) local burnup based on initial 235 U content. Additionally, finite element thermal modeling was performed based as-run power history which showed a beginning-of-life (BOL) peak local heat flux of 184 W/cm 2 . No anomalous fuel performance was observed during the irradiation and target test conditions were achieved. PIE showed favorable performance of the fuel assembly regarding all important phenomena. This paper describes the KJRR fuel assembly irradiation conditions and PIE data to support the conclusion that it performed well, without evidence of unexpected or problematic fuel performance, within an irradiation test designed to bound the KJRR design environment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

A Technology Roadmap for Advanced Geothermal Well Construction

Recent analysis has shown that by 2050, geothermal energy can supply up to 90 GW of power to the U.S. electrical grid. Reducing the lifecycle cost of geothermal wells is critical to achieving this level of adoption. While time-related costs of drilling remain an important issue, there is also a need to focus on the costs associated with casing and cementing of geothermal wells. This report provides a roadmap of R&D activities needed to reduce the life cycle cost of casing and cementing while improving life-of-well performance. The purpose of the roadmap is to develop priorities for R&D in the areas of (1) high-performance and cost-effective materials for target geothermal well conditions, (2) well construction methods and techniques to reduce construction costs, and (3) methods and techniques to decrease to decrease long-term operating costs. The roadmap sets targets for the next 10-year period and purposely excludes R&D efforts into improved rock reduction. The roadmap was developed by a joint working group of experts from Oak Ridge National Laboratory, Brookhaven National Laboratory, and Sandia National Laboratories as well as 35 experts from industry and academia. Input from a series of information gathering sessions was used to inform and guide the development of the roadmap.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Thermo-physical Properties of U-10Mo Monolithic Fuel

Monolithic fuel is a candidate fuel form that is being considered for the conversion of high-performance research reactors. This plate-type fuel consists of a high-density, U-Mo fuel in a monolithic form that is sandwiched between zirconium diffusion barriers and encapsulated in an aluminum cladding. To date, many plates were irradiated with a satisfactory irradiation performance, demonstrating that the conceptual design works. The program is now moving to the qualification phase, a predecessor to the timely conversion of the target reactors. To qualify this fuel system, the program must show that the fuel plates have predictable behavior, meet the safety standards, and perform well in reactors. The requirement of a satisfactory irradiation performance under normal operating conditions is primarily demonstrated by a successful testing. To demonstrate that the fuel system has a predictable behavior, the several key material properties should be quantified accurately since these properties are needed to estimate the thermal and mechanical behavior of the fuel system. Although, there is a large set of thermophysical property data available for unirradiated material, the property data for irradiated fuel is scarce. Since irradiation causes drastic effects in material, a significant change in material properties occurs. Consequently, using representative degradation models becomes essential for accurate performance assessments. This work examines thermal conductivity of U-10Mo, by evaluating recent experimental data from the literature and available theoretical models. The study has discovered inconsistencies in the literature data, revealing that previously developed theoretical models fail to predict the thermal conductivity of irradiated fuel.

42 ENGINEERING↗
DOE OSTI2022

Development of a Kollidon 90F-PEG300-Glycerin Binder for PZT 95/5 Ceramic Processing

This SAND Report documents the development of organic binder system for PZT 95/5 consisting of Kollidon 90F, PEG300, and glycerin. Binders are a critical component in the manufacture of ceramic components. Low performing binders can result in poor yield and lower performance of ceramic components. This study sought to develop a well performing binder system for PZT 95/5 ceramics to support Ferroelectric Neutron Generator manufacturing. The study explored the glass transition temperature, powder compaction properties, green strengths, and thermal decomposition over a wide composition range. An optimal composition was found consisting of 1.3 wt.% Kollidon 90F, 0.5 wt.% PEG300, and 0.2 wt.% glycerin, and incorporating humidity conditioning . The results showed that the optimized binder exhibited improved compaction performance and enhanced green strength compared to a baseline binder and at lower loading. Further, sintered PZT 95/5 parts prepared using the optimized binder exhibited ~5% improved polarization performance without alteration to the microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Using Graph Edit Distance for Noisy Subgraph Matching of Semantic Property Graphs

The subgraph matching problem is a fundamental problem in graph theory that is known to be NP-complete. In this study, performers were asked to develop algorithms to search for semantic property graphs that were subgraphs of a large knowledge graph. The templates provided contained structural information about the subgraphs and some attributes for each node and edge. There also exists a similarity measure between a set of attribute values that occurs on every node and edge. Algorithms performed well in the case where an exact match existed, but performers were also provided templates that had noise added such that there existed no match in the knowledge graph. Performers were asked to find the closest matches to those noisy subgraphs. To evaluate performance on this task, we developed a version of the graph edit distance algorithm to measure the cost of editing the template graph so that it is isomorphic in structure and attributes to the performer submission.

Ebsch, Christopher L.↗
DOE OSTI2025

Structural Evolution of the Hogback Monocline and Its Tectonic Significance in the San Juan Basin

The San Juan Basin is recognized as a Laramide foreland basin. It is located within the Colorado Plateau, a broad tectonic province characterized by a thick sedimentary sequence that was segmented into smaller sub basins during the Late Cretaceous to Paleogene Laramide orogeny. The Hogback Monocline lies along the northwestern margin of the San Juan Basin and is considered a Laramide-age structure formed in response to compressional stress. In this study, we interpret surface and subsurface datasets to construct a structural geological model and evaluate its tectonic significance. Through seismic data, we identify key fault and fold geometries at depth. The seismic dataset used in this study was reprocessed in depth and constrained with well log velocity data to enhance seismic imaging quality. Additionally, we performed well log correlations to identify formation tops and assess variations in basin infill and thickness geometry. A series of structural cross-sections, constructed using seismic data and a high density of boreholes, are presented to evaluate geometric variations along the structure and its evolution during basin development. Furthermore, kinematic restoration and forward modeling analyses were conducted to validate our structural interpretation. This work suggests that the Hogback Monocline formed through fault-propagation folding and flexural slip affecting the pre-Laramide sedimentary sequence under compressional stresses associated with the Laramide orogeny. This structure is interpreted as a high-angle reverse fault that influenced the geometry of the late basin infill. Additionally, monocline bending along the structure may have been controlled by fault relay systems and, in some cases, influenced by strike-slip faulting.

Reyes, Martin [New Mexico Bureau o fGeology and Mi↗
DOE OSTI2025

Marcellus assessment shows continued expansion

Increasing uncertainty regarding the remaining volume of recoverable gas in Appalachian shale plays provided the original motivation for this study. Assessments of the Marcellus and Utica shale plays published by the US Geological Survey (USGS) in 2019 established resource volumes dramatically lower than ongoing well performance would indicate. Further, as production in the Marcellus increased and wells matured, operators observed that wells were producing more than the estimated gas-in-place (GIP).

03 NATURAL GAS↗
DOE OSTI2021

Multi-scale assessment of a grassland productivity model

Grasslands provide many important ecosystem services globally, and projecting grassland productivity in the coming decades will provide valuable information to land managers. Productivity models can be well calibrated at local scales but generally have some maximum spatial scale in which they perform well. Here we evaluate a grassland productivity model to find the optimal spatial scale for parameterization and thus for subsequently applying it in future productivity projections for North America. We also evaluated the model on new vegetation types to ascertain its potential generality. We find the model most suitable when incorporating only grasslands, as opposed to also including agriculture and shrublands, and only in the Great Plains and eastern temperate forest ecoregions of North America. The model was not well suited to grasslands in North American deserts or northwest forest ecoregions. It also performed poorly in agriculture vegetation, likely due to management activities, and shrubland vegetation, likely because the model lacks representation of deep water pools. This work allows us to perform long-term projections in areas where model performance has been verified, with gaps filled in by future modeling efforts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluating proxies for the drivers of natural gas productivity using machine-learning models

We report the extensive development of unconventional reservoirs using horizontal drilling and multistage hydraulic fracturing has generated large volumes of reservoir characterization and production data. The analysis of this abundant data using statistical methods and advanced machine-learning (ML) techniques can provide data-driven insights into well performance. Most predictive modeling studies have focused on the impact that different well completion and stimulation strategies have on well production but have not fully exploited the available in situ rock property data to determine its role in reservoir productivity. We have used machine-learning techniques to rank rock mechanical properties, microseismic attributes, and stimulation parameters in the order of their significance for predicting natural gas production from an unconventional reservoir. The data for this study came from a hydraulically fractured well in the Marcellus Shale in Monongalia County, West Virginia. The data classes included measurements aggregated by well completion stage that included (1) gas production, (2) well-log-derived measurements including bulk density, elastic moduli, shear impedance, compressional impedance, brittleness, and gamma measurements, (3) microseismic attributes, (4) long-period long-duration (LPLD) event counts, (5) fracture counts, and (6) stimulation parameters that included the fluid injection volume and average pumping pressure. To identify observable proxies for the drivers of gas production, we evaluated five commonly used ML approaches including multivariate adaptive regression spline, Gaussian mixture model, random forest, gradient boosting, and neural network. We selected five variables including LPLD event count, seismogenic b-value, hydraulic diffusivity, cumulative moment, and fluid volume as the features most likely to impact gas productivity at the stage level in the study area. The data-driven selection of these parameters for their importance in determining gas production can help reservoir engineers design more effective hydraulic-fracture treatments in the Marcellus Shale and other similar unconventional reservoirs. Plain language summary: We use machine-learning methods and data-driven selection of reservoir parameters to rank and better understand their importance in determining gas production, which can help reservoir engineers design more effective hydraulic-fracture treatments in the Marcellus Shale and other similar unconventional reservoirs.

58 GEOSCIENCES↗
DOE OSTI2025

Organic Electrochemical Transistor Channel Materials: Copolymerization Versus Physical Mixing of Glycolated and Alkoxylated Polymers

Organic electrochemical transistors (OECTs) feature a polymer channel capable of conducting both ions and electronic charges. The choice of the channel material is critical for OECT performance. Many efforts have focused on improving performance via the chemical tunability of conjugated polymers – through backbone, side chain, and molar mass engineering – leading to useful design principles for accumulation-mode OECT materials. However, tuning the chemical structure of conjugated polymers often requires time-consuming optimization of the synthesis route. Meanwhile, variations in molar mass, dispersity, structural defects, and metal content present challenges when attempting to analyze the detailed effects of structural modifications, as multiple performance-determining factors are often (unintentionally) changed at the same time. Therefore, this study explores blended channel materials obtained by physically mixing glycolated and alkoxylated polymers in different ratios, and compares their OECT performance with the corresponding statistical copolymers. It is shown that mixing two well-performing materials creates blends that enable rational tuning of the transistor properties without compromising on performance. Thus, channels based on blends of alkoxylated and glycolated polymers hold promise for OECT technology with tailored response, as only two materials are needed to achieve any desired side chain ratio, simplifying the optimization of OECT characteristics.

copolymerization↗
DOE OSTI2021

Assessment of Cladding-Cladding Delamination Failures in U-Mo Fuel Plates

Monolithic fuel is a candidate fuel form for the conversion of high-performance research reactors. This plate-type fuel consists of a high-density, U-Mo alloy-based fuel in a monolithic form that is sandwiched between zirconium diffusion barriers and encapsulated in an aluminum cladding. To qualify this fuel system, the program must demonstrate that the fuel meets the safety standards, has a predictable behavior, and performs well in a reactor. Although many plates have shown satisfactory thermo-mechanical performance in reactor, a small number of experimental plates exhibited failures, rendering performance of these plates unacceptable. Post-irradiation examinations of failed plates have revealed that various failures modes are present, including pillowing, blistering, buckling, warping, delamination, fracture, rupture, oxide spallation, etc. Previous studies have implied that such various operational and loading conditions could generate a complex stress-strain state, facilitating distinct failure modes that could impact the structural integrity. To understand such various failure modes, a comprehensive set of studies focusing on failure modes is being performed. As a part of these studies, this work studies the cladding-cladding separation failures that were observed in some of previous irradiation tests. To understand the root cause of cladding separation failures, selected plates from previous irradiation experiments were simulated under comparable operational conditions. Stress-strain state of the plates at the interface were examined. The results were comparatively evaluated to understand possible effects of stress state of the bond-line on delamination failures. This paper presents these findings, discusses such failure modes, and examines the influence of various factors on previously observed cladding delamination failures.

42 ENGINEERING↗
DOE OSTI2022

Dynamic Frequency Regulation Improvement in Hydropower-Hybrid System using Variational Mode Decomposition

Providing frequency response, especially fast frequency response such as Red D in the Pennsylvania-New Jersey-Maryland Interconnection (PJM) market, is challenging for many generation plants to deliver on their own. If they have adequate flexibility, hydropower plants are typically able to provide slower regulation support (e.g., Reg A in PJM), but do not respond fast enough to provide Reg D. The ability to provide Reg D would improve their revenue because this service is typically more valuable. This work presents a control approach to use hydropower, battery, and ultracapacitor systems to provide fast regulation in a way that uses the response contribution of each asset. In particular, the proposed control architecture applies a variational mode decomposition (VMD) technique on the incoming Reg D signal to extract multiple dynamic-regulation components with non-overlapping frequencies. With the response-speed dependent alignment, these regulation components are fed to the hydrogenator and hybrid energy storage system (HESS). The paper evaluates the proposed approach on a direct-current (DC)-coupled active system by computing several performance measures and analyzing sensitivity based on HESS component proportional capacities. The results reveal that the proposed VMD-based signal conditioning performs well and that optimizing the sizing of the battery and ultracapacitor components further enhances performance.

13 HYDRO ENERGY↗
DOE OSTI2021

The Value of Diversity in the Renewable Energy Industry and Research Community

Part of creating a successful solar industry is developing a capable workforce. It has been repeatedly shown that organizations and companies are more productive when they have diverse and inclusive cultures. The solar industry in the U.S. performs well in some aspects (non-white workforce, positive work environment) but drastically under-performs in many others. We discuss these metrics and how this impacts the renewable energy industry and the solar research community. We highlight some initial actions which are necessary to begin to remediate these deficiencies, such as demographic tracking, recruiting strategies, and mentoring. We also present the historical and ongoing efforts to improve the diversity and inclusion of the Photovoltaic Specialists Conference, particularly through the work of this year’s Diversity and Inclusion (D&I) oversight committee. This year’s D&I committee is implementing diversity tracking, a women’s lunch, a diversity lunch, childcare resources, pronouns on badges, gender-neutral restrooms, addressing accessibility issues, and publishing a diversity statement and code of conduct to the PVSC website.

diversity↗
DOE OSTI2024

How well do one-electron self-interaction-correction methods perform for systems with fractional electrons?

Recently developed locally scaled self-interaction correction (LSIC) is a one-electron SIC method that, when used with a ratio of kinetic energy densities (z σ ) as iso-orbital indicator, performs remarkably well for both thermochemical properties as well as for barrier heights overcoming the paradoxical behavior of the well-known Perdew–Zunger self-interaction correction (PZSIC) method. In this work, we examine how well the LSIC method performs for the delocalization error. Our results show that both LSIC and PZSIC methods correctly describe the dissociation of $H$$^{+}_{2}$ and $H$$^{+}_{2}$ but LSIC is overall more accurate than the PZSIC method. Likewise, in the case of the vertical ionization energy of an ensemble of isolated He atoms, the LSIC and PZSIC methods do not exhibit delocalization errors. For the fractional charges, both LSIC and PZSIC significantly reduce the deviation from linearity in the energy vs number of electrons curve, with PZSIC performing superior for C, Ne, and Ar atoms while for Kr they perform similarly. The LSIC performs well at the endpoints (integer occupations) while substantially reducing the deviation. The dissociation of LiF shows both LSIC and PZSIC dissociate into neutral Li and F but only LSIC exhibits charge transfer from Li + to F – at the expected distance from the experimental data and accurate ab initio data. Overall, both the PZSIC and LSIC methods reduce the delocalization errors substantially.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Global 1 km land surface parameters for kilometer-scale Earth system modeling

Earth system models (ESMs) are progressively advancing towards the kilometer scale (“k-scale”). However, the surface parameters for land surface models (LSMs) within ESMs running at the k-scale are typically derived from coarse-resolution and outdated datasets. This study aims to develop a new set of global land surface parameters with a resolution of 1 km for multiple years from 2001 to 2020, utilizing the latest and most accurate available datasets. Specifically, the datasets consist of parameters related to land use and land cover, vegetation, soil, and topography. Differences between the newly developed 1 km land surface parameters and conventional parameters emphasize their potential for higher accuracy due to the incorporation of the most advanced and latest data sources. To demonstrate the capability of these new parameters, we conducted 1 km resolution simulations using the E3SM Land Model version 2 (ELM2) over the contiguous United States. Our results demonstrate that land surface parameters contribute to significant spatial heterogeneity in ELM2 simulations of soil moisture, latent heat, emitted longwave radiation, and absorbed shortwave radiation. On average, about 31 % to 54 % of spatial information is lost by upscaling the 1 km ELM2 simulations to a 12 km resolution. Using eXplainable Machine Learning (XML) methods, the influential factors driving the spatial variability and spatial information loss of ELM2 simulations were identified, highlighting the substantial impact of the spatial variability and information loss of various land surface parameters, as well as the mean climate conditions. The comparison against four benchmark datasets indicates that ELM generally performs well in simulating soil moisture and surface energy fluxes. The new land surface parameters are tailored to meet the emerging needs of k-scale LSM and ESM modeling with significant implications for advancing our understanding of water, carbon, and energy cycles under global change. The 1 km land surface parameters are publicly available at https://doi.org/10.5281/zenodo.10815170 (Li et al., 2024).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Optimization and Portability of a Fusion OpenACC-based FORTRAN HPC Code from NVIDIA to AMD GPUs

NVIDIA has been the main provider of GPU hardware in HPC systems for over a decade. Most applications that benefit from GPUs have thus been developed and optimized for the NVIDIA software stack. Recent exascale HPC systems are, however, introducing GPUs from other vendors, e.g. with the AMD GPU-based OLCF Frontier system just becoming available. AMD GPUs cannot be directly accessed using the NVIDIA software stack, and require a porting effort by the application developers. This paper provides an overview of our experience porting and optimizing the CGYRO code, a widely-used fusion simulation tool based on FORTRAN with OpenACC-based GPU acceleration. While the porting from the NVIDIA compilers was relatively straightforward using the CRAY compilers on the AMD systems, the performance optimization required more fine-tuning. In the optimization effort, we uncovered code sections that had performed well on NVIDIA GPUs, but were unexpectedly slow on AMD GPUs. After AMD-targeted code optimizations, performance on AMD GPUs has increased to meet our expectations. Modest speed improvements were also seen on NVIDIA GPUs, which was an unexpected benefit of this exercise.

Sfiligoi, Igor↗
DOE OSTI2022

Recovering the Star Formation Histories of Recently Quenched Galaxies: The Impact of Model and Prior Choices

Accurate models of the star formation histories (SFHs) of recently quenched galaxies can provide constraints on when and how galaxies shut down their star formation. The recent development of nonparametric SFH models promises the flexibility required to make these measurements. However, model and prior choices significantly affect derived SFHs, particularly for post-starburst galaxies (PSBs), which have sharp changes in their recent SFH. In this paper, we create mock PSBs, then use the Prospector SED fitting software to test how well four different SFH models recover key properties. We find that a two-component parametric model performs well for our simple mock galaxies, but is sensitive to model mismatches. The fixed- and flexible-bin nonparametric models included in Prospector are able to rapidly quench a major burst of star formation, but systematically underestimate the post-burst age by up to 200 Myr. We develop a custom SFH model that allows for additional flexibility in the recent SFH. Our flexible nonparametric model is able to constrain post-burst ages with no significant offset and just ~90 Myr of scatter. Our results suggest that while standard nonparametric models are able to recover first-order quantities of the SFH (mass, SFR, average age), accurately recovering higher-order quantities (burst fraction, quenching time) requires careful consideration of model flexibility. These mock recovery tests are a critical part of future SFH studies. Finally, we show that our new, public SFH model is able to accurately recover the properties of mock star-forming and quiescent galaxies and is suitable for broader use in the SED fitting community. https://github.com/bd-j/prospector

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Knock Mitigation Effectiveness of EGR across the Pressure-Temperature Domain

Exhaust gas recirculation (EGR) has been shown to enable efficiency improvements in SI engines through multiple different mechanisms, including decreasing the knock propensity at high load, which allows higher compression ratio. While many of the benefits of EGR are applicable to both low and high power density engines, including reductions in pumping work and improved specific heat ratio, the knock benefits and corresponding compression ratio increases have been limited to low power density naturally aspirated engines primarily intended for hybrid vehicle architectures. An earlier study [1] indicated that there may be a kinetic limitation for the ability of EGR to mitigate knock under these conditions, but that study only considered a small number of conditions. In this investigation, we expand on that study while also providing data for model validation for the new light-duty combustion consortium from the U.S. Department of Energy: Partnership for Advancing Combustion Engines (PACE). In this investigation, the effectiveness of EGR to mitigate knock is studied with regards to the effect of engine speed (1,500 and 3,000 rpm), changing trajectory in the pressure-temperature domain by varying the intake manifold temperature (35, 60, and 90 deg C), and by considering the effect of minor species by studying the effect of untreated EGR vs. EGR that has been treated by an automotive three-way catalyst. Additionally, to increase the relevance of these data for future modeling studies, the performance of the full boiling range gasoline was compared relative to a surrogate formulation. The study found that the fuel surrogate performs well, confirmed the kinetic limitations of EGR to mitigate knock under boost, and showed improvements in EGR performance with catalyzed EGR.

42 ENGINEERING↗