Search NASA⌕ Search

SEARCH · Search NASA

Results for “Wet waste Conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

47 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

VFA Biorefinery Design for Informed Production of Ground and Aviation Fuels

The rising demand for low-carbon intensity fuel options requires evaluation of a system which can support their production economically and sustainably. Volatile fatty acids (VFAs) ranging from C2 to C8 can be derived in high yield from arrested anaerobic digestion of biomass. This talk provides an overview of our work in which we upgrade wet waste-derived VFAs using ketonization to elongate their carbon backbone to reach a range relevant to jet or diesel fuels. Kinetic models were used to predict ketone profiles from varying VFA profiles, thereby informing potential carbon flow to either (a) mixed paraffins for use in diesel or aviation fuel, or (b) ethers for use in diesel fuel. To do this, the anticipated products were screened for critical fuel characteristics using predictive tools. The criteria for neat and blended bioblendstocks were chosen based on conventional petrofuel requirements, and they were applied to inform fuel targets, identify limiting characteristics, and guide conversion development. While paraffins can serve as either diesel or aviation fuels, the latter has stringent criteria which include a precise distillation curve range tied to carbon distribution. Fuels which fall outside this range typically fail to meet other property metrics, and as such flashpoint and viscosity were identified as potentially limiting properties of this VFA aviation fuel. However, paraffin fractions which fall outside aviation criteria may meet diesel fuel requirements, which are looser except for the flashpoint minimum. Flashpoint was also a concern for smaller VFA diesel ethers, which posed an additional oxygenate risk of high water solubility. This fuel-informed conversion design process was demonstrated through production of paraffins with reduced sooting as compared to petrodiesel (~34%), and increased renewable aviation fuel blend levels (>70%). VFA-derived ethers improved petrodiesel by increasing fuel autoignition quality by 56% and reducing sooting by 86%. These VFA aviation and diesel fuels could enable greenhouse gas (GHG) reductions of over 165% and 50%, respectively, relative to their purely fossil-derived counterparts. Collectively, this work provides (i) an overview of how we leveraged the flexibility of VFAs for fuel production; and (ii) insight into the potential of a VFA biorefinery to accommodate varied feed and fuel applications, while also considering the merit of tailored fuel production pathways and GHG reduction potential.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1990

Biomass production and nitrogen dynamics in an integrated aquaculture/agriculture system

A combined aquaculture/agriculture system that brings together the three major components of a Controlled Ecological Life Support System (CELSS) - biomass production, biomass processing, and waste recycling - was developed to evaluate ecological processes and hardware requirements necessary to assess the feasibility of and define design criteria for integration into the Kennedy Space Center (KSC) Breadboard Project. The system consists of a 1 square meter plant growth area, a 500 liter fish culture tank, and computerized monitoring and control hardware. Nutrients in the hydrophonic solution were derived from fish metabolites and fish food leachate. In five months of continuous operation, 27.0 kg of lettuce tops, 39.9 kg of roots and biofilm, and 6.6 kg of fish (wet weights) were produced with 12.7 kg of fish food input. Based on dry weights, a biomass conversion index of 0.52 was achieved. A nitrogen budget was derived to determine partitioning of nitrogen within various compartments of the system. Accumulating nitrogen in the hypoponic solution indicated a need to enlarge the plant growth area, potentially increasing the biomass production and improving the biomass conversion index.

Owens, L. P.↗
DOE OSTI2022

Synthesis of Nitro Compounds from Nitrogen Dioxide Captured in a Metal-Organic Framework

Increasing levels of air pollution are driving the need for the development of new processes that take “waste-to-chemicals”. Herein, we report the capture and conversion under ambient conditions of a major air pollutant, NO 2 , using a robust metal-organic framework (MOF) material, Zr-bptc (H 4 bptc = 3,3',5,5'-biphenyltetracarboxylic acid), comprising {Zr 6 (μ 3 -O) 4 (μ 3 -OH) 4 (COO) 12 } clusters linked by 4-connected bptc 4– ligands in an ftw topology. At 298 K, Zr-bptc shows exceptional stability and adsorption of NO 2 at both low (4.9 mmol g –1 at 10 mbar) and high pressures (13.8 mmol g –1 at 1.0 bar), as measured by isotherm experiments. Dynamic breakthrough experiments have confirmed the selective retention of NO 2 by Zr-bptc at low concentrations under both dry and wet conditions. The immobilized NO 2 can be readily transformed into valuable nitro compounds relevant to construction, agrochemical, and pharmaceutical industries. In situ crystallographic and spectroscopic studies reveal strong binding interactions of NO 2 to the {Zr 6 (μ 3 -O) 4 (μ 3 -OH) 4 (COO) 12 } cluster node. This study paves a circular pathway to enable the integration of nitrogen-based air pollutants into the production of fine chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Microwave-Assisted Reforming of Tar Model Compound Using the Ni/La-CeO2 Catalyst

Gasification of solid feedstocks like coal, biomass and waste plastic produces syngas as a desired product. However, this process also produces an unwanted byproduct known as tar, which is a sticky compound consisting of a mixture of complex aromatic and polyaromatic hydrocarbons. The tar formed during the gasification process lowers the syngas yields and reduces the gasification efficiency by damaging the reactor. Therefore, it is essential to reduce the amount of tar formed during the gasification process. Catalytic reforming of tars is one way to mitigate tars. The goal of this research is to explore the possibility of microwave-assisted catalytic tar conversion to syngas. However, due to the complexity of the tar, toluene has been used as a model tar compound as it is stable and easy to handle. Ni-La/CeO2 was used as a catalyst for this study, which was synthesized by wet impregnation method. Fresh and spent catalysts were analyzed using various techniques to understand the reaction mechanism. The reaction was performed both under microwave (MW) and conventional (CV) reactor for comparison.

catalysis↗
DOE OSTI2023

Desalting biocrude for improved downstream processing toward marine fuel application

Hydrothermal liquefaction of wet wastes (e.g., food waste and sewage sludge) offers a promising avenue for producing biocrude, but the resulting product is often contaminated with metals and water, impacting the biocrude upgrading steps to produce final fuel (e.g., jet and diesel). Here this study investigates the use of aqueous solutions of formic acid for desalting biocrudes and improving their quality. The results show that this approach significantly reduces both metal and water content, enabling mild hydrotreatment with reduced hydrogen consumption to further enhance the biocrude's quality. A preliminary technoeconomic analysis based on these experimental results shows that even without optimization, this washing process can yield biocrude with a minimum selling price of $1.87/GGE. Overall, our study demonstrates the potential for using dilute formic acid aqueous solutions to improve the quality of biocrudes, which can lead to more efficient and cost-effective conversion into biofuels.

09 BIOMASS FUELS↗
DOE OSTI2022

Alternate Methods for Cleaning Zirconium Plate

The United States High Performance Research Reactor Conversion Program identified the need to transition from highly enriched uranium fuel to lowly enriched uranium fuel for high power research and civil reactors. One of the fuel configurations selected for these reactors was a uranium (U) foil alloyed with 10% molybdenum (Mo). The U-10Mo fuel foil was then covered with a zirconium (Zr) interlayer and pressed into an aluminum cladding. Idaho National Laboratory prescribed a need to remove surface oxidation on the Zr prior to bonding it with U-10Mo fuel foil. To determine the best method of oxidation removal, a variety of polishing methods, including hand polishing with a diamond paste or Scotch-Brite™ pads, mechanically wet-polishing with abrasive belts, and chemical etching with hydrofluoric/nitric acid mixtures, were investigated on pre-polished Zircaloy 702 sheets purchased directly from the manufacturer. No change in surface roughness was detected using any of these methods relative to the as-received material. In fact, scanning electron microscopy detected grit from hand polishing with Amplex Grade 30 waste soluble diamond paste and Scotch-Brite™ pads. Visible staining was found, and fluorine detected via X-ray photoelectron spectroscopy on the flash etching samples. These contaminants were not seen on the as-received material. In addition to the need to remove the oxide layer on the Zr prior to co-rolling, there are concerns that the Neolube debonding agent on the co-rolling can may contaminate the Zr surface after co-rolling. The experimental results found that zirconium in contact with Neolube coated steel plates was easily cleaning with ethanol wiping after heat treated and no carbide inclusions remained on the surface. Overall, all cleaning methods tested did not significantly change the surface roughness of the plates or reduce the oxide layer present on the zirconium. Carbon was found on all the samples, before and after cleaning, except for the flash etch samples which detected fluorine instead. The insignificant changes seen in the cleaned plates relative to the as received plates question the need for cleaning prior to rolling. Further investigation in the requirements for cleaning at this step is recommended. Current methods for cleaning the surface after hot rolling with alcohol appear sufficient. After hot rolling, if Neolube does peel off the can and onto the zirconium coated foil surface, a dry abrasive or diamond paste polish is not recommended due to the chance of abrasive being embedded into the surface. However, the ability of an etchant to lift the lubricant off the zirconium surface indicates that a spot etch method could work to clean specific spots where Neolube is present, if the need arises.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Unlocking the biofuel power of cover crop in Washington State: Enhancing potential through hydrothermal liquefaction

This study evaluates cover crops in Washington State (WA) as a renewable feedstock for hydrothermal liquefaction (HTL), supported by techno-economic (TEA) and life cycle (LCA) analysis. In the Pacific Northwest, fallow land is the common winter practice, generating no income for farmers. Over three years, field trials at two representative sites—Puyallup (cool, wet) and Othello (irrigated, no-till)tested triticale, hairy vetch, crimson clover, winter pea, and fava bean preceding cash crops. Biomass yields, composition, soil impacts, and net revenue were assessed across removal treatments. HTL conversion produced 32–37 wt% biocrude, lower than 48 wt% for sewage sludge, with modeled cradle-to-grave carbon intensities of 26–31 g CO 2 e/MJ and minimum fuel selling prices (MFSP) of $\$$6.75–$\$$7.18 per gallon gasoline equivalent (GGE), comparable to other lignocellulosic feedstocks. No significant changes were observed in soil carbon, nitrogen, or subsequent cash crop yields after cover crop removal. Farmer profitability was possible, particularly for triticale and hairy vetch at $\$$60 per dry ton. To address seasonal variability, blending with wastewater sludge was evaluated. All scenarios delivered >70 % carbon intensity reductions relative to fossil fuels, and with Renewable Identification Number (RIN) credits, MFSPs below $\$$2.5 GGE were achievable. These results demonstrate that cover crops can generate new revenue streams for farmers while serving as a flexible, low-carbon feedstock. Integrating cover crops with waste biomass offers a practical pathway to expand the bioeconomy and support year-round renewable fuel production.

Biofuels↗
DOE OSTI2023

Catalytic Upgrading of Carbohydrates in Waste Streams to Hydrocarbons: Paper Sludge to Fuel Project (PStF)

This research, funded by the Department of Energy Bioenergy Technologies Office (DOE BETO), aims to understand the barriers and assess opportunities for transforming carbohydrates in paper sludge, a solid lignocellulosic residue from the pulp and paper industry. The goal is to turn the paper sludge into a liquid hydrocarbon product that can be blended into jet fuel, both economically and sustainably. Research groups at North Carolina State University, National Renewable Energy Laboratory, and Yale University collaborated synergistically, leveraging their expertise in pulp and paper operations, biomass deconstruction, and catalytic upgrading to propose a pathway that efficiently captures the energy in paper sludge. Findings from this study could potentially contribute to advancing biomass conversion technologies, aligning with the efforts of the U.S. DOE BETO. This report documents the experimental and simulation results of a biochemical and catalytic pathway designed to transform paper sludge into a liquid hydrocarbon product. The process involves a sequence of seven steps, including ash removal, carbohydrate enzymatic hydrolysis, sugar dehydration, solvent recovery, aldol-condensation between furans and ketone, hydrogenation, and hydrodeoxygenation to obtain a hydrocarbon blend in the ~C10 range. The experimental efforts from the initiation of the project were guided by techno-economic analysis (TEA) and sensitivity analysis results including around seventy-eight operational parameters. This methodology facilitated the efficient use of resources over time. This study relies on detailed process simulations and TEA to determine the minimum fuel selling price (MFSP) for the hydrocarbon fuel product. Preliminary TEA results led to the evaluation of eight case studies considering alternative dehydration co-solvents, operational settings, and biorefinery layouts. Finally, the life cycle assessment of twenty-eight scenarios, comparing various dehydration co-solvents, fuel sources, chemical feedstock sources, side product utilization, and other process settings, was conducted. Landfilling scenarios with and without landfill gas recovery were also estimated, analyzed, and compared.

09 BIOMASS FUELS↗
NASA NTRSDate not supplied

In-situ Raman Instrumentation and Measurements in Supercritical Water Oxidation Systems

Due to the advent of recent advances in reactor designs and operational procedures, renewed attention has been given to a host of supercritical water oxidation (SCWO) technology applications. This includes resource recovery, water reclamation, and solid waste destruction. SCWO is often recognized as a “green technology” because of its ability to extract useful energy while producing benign products from environmentally challenging waste streams (e.g., wet organic wastes, pharmaceutical wastes, military wastes). The present work was motivated by NASA’s interests in solid waste management and water recovery for long-duration space missions. To that end, the main focus of this paper is to present work on characterizing the behavior of supercritical water oxidation systems utilizing state of the art laser Raman spectroscopy. The main benefit of Raman diagnostics is its ability to identify chemical composition and to measure concentrations of the compounds involved in the reaction. Two separate Raman systems for SCWO measurements that have been developed for this study will be described. The first system is a 2-D traversing system useful for making in-situ measurements in conditions where spatial gradients of species and temperature are important and has been successfully utilized in making species (ethanol, oxygen, water, nitrogen and carbon dioxide) concentrations and temperature measurements in ethanol hydrothermal jet flames. The second system is a packaged modular Raman probe unit for portable deployment to different reactors and is more suitable for relatively homogeneous systems such as a batch reactor. The design, development, and examples of obtained results from both systems will be presented for various reactant streams. Reaction rate and fuel conversion estimates from chemistry models will also be presented.

supercritical water oxidation↗
DOE OSTI2022

Screening and evaluation of biomass upgrading strategies for sustainable transportation fuel production with biomass-derived volatile fatty acids

Biomass conversion to fuels and chemicals is crucial to decarbonization, but choosing an advantageous upgrading pathway out of many options is challenging. Rigorously evaluating all candidate pathways (process simulation, product property testing) requires a prohibitive amount of research effort; even simple upgrading schemes have hundreds of possible permutations. We present a method enabling high-throughput screening by approximating upgrading unit operations and drop-in compatibility of products (e.g., fuel properties) and apply it to volatile fatty acid (VFA) conversion to liquid transportation fuels via a MATLAB script, VFA Upgrading to Liquid Transportation fUels Refinery Estimation (VULTURE). VULTURE selects upgrading configurations that maximize fuel blend bio-derived content. We validate VULTURE's approximations through surrogate fuel property testing and process simulation. Techno-economic and life cycle analyses suggest that VFA upgrading processes down-selected by VULTURE are profitable and have low carbon intensities, demonstrating the potential for the strategy to accelerate process development timelines at decreased costs.

09 BIOMASS FUELS↗
DOE OSTI2025

Integrated CO 2 capture and hydrogenation in presence of Ru–Na 2 ZrO 3 : An in-situ study

Integrated CO 2 capture and conversion (ICCC) by hydrogenation is a promising strategy to utilize carbon dioxide and this work add to the effort to elucidate the catalytic hydrogenation mechanism using Ru based dual functional materials (DFM). Ru-Na 2 ZrO 3 DFMs, obtained through different wet methods, were evaluated for the first time and the relationship between Ru and support systematically investigated. The thermally stable and cyclable Ru-Na 2 ZrO 3 -a (obtained without filtration step) exhibited CO 2 conversion of 80% and a higher yield of CO at 400°C compared to previously tested DFM, while the Na depleted/Zr rich Ru-Na 2 ZrO 3 -b resulted in 90% selectivity to CH 4 with yield of 1.11 mmol/g at the same temperature. The in-situ experiments have provided conclusive evidence showing that CO 2 hydrogenation on the two Ru DFMs is fundamentally different. In Ru-Na 2 ZrO 3 -a, the monoclinic Na 2 ZrO 3 support acted as the active centre (not as promoter) for CO 2 bridging binding and hydrogenation to CH 4 at the metal-support interface through associative formate pathway with limited further reduction to methane due to lack of H 2 spillover from the small and well dispersed Ru NPs, which results in CO desorption. Conversely, abundant clusters of larger Ru NPs in Ru-Na 2 ZrO 3 -b, led to CH 4 production due to co-existent Ru on-top direct dissociation of CO 2 (preferential) and monodentate formate adsorption and further methanation. Alkali zirconates doped metals, and their synthesis method could thus play a crucial role in designing tuneable heterogeneous catalysis in C 1 chemistry, which could significantly benefit the environment by lowering CO 2 levels, encouraging cleaner industrial practices, supporting a circular economy, and converting waste CO 2 into valuable products.

36 MATERIALS SCIENCE↗