Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Compositional and phase dependence of elastic modulus of crystalline and amorphous Hf 1- x Zr x O 2 thin films

The elastic moduli of amorphous and crystalline atomic layer-deposited Hf 1-x Zr x O 2 (HZO, x = 0, 0.31, 0.46, 0.79, 1) films prepared with TaN electrodes on silicon substrates were investigated using picosecond acoustic measurements. The moduli of the amorphous films were observed to increase between 211 ± 6 GPa for pure HfO 2 and 302 ± 9 GPa for pure ZrO 2 . In the crystalline films, it was found that the moduli increased upon increasing the zirconium composition from 248 ± 6 GPa for monoclinic HfO 2 to 267 ± 9 GPa for tetragonal ZrO 2 . Positive deviations from this increase were observed for the Hf 0.69 Zr 0.31 O 2 and Hf 0.54 Zr 0.46 O 2 compositions, which were measured to have moduli of 264 ± 8 GPa and 274 ± 8 GPa, respectively. These two compositions contained the largest fractions of the ferroelectric orthorhombic phase, as assessed from polarization and diffraction data. The biaxial stress states of the crystalline films were characterized through sin 2 (ψ) x-ray diffraction analysis. The in-plane stresses were all found to be tensile and observed to increase with the increasing zirconium composition, between 2.54 ± 0.6 GPa for pure HfO 2 and 5.22 ± 0.5 GPa for pure ZrO 2 . The stresses are consistent with large thermal expansion mismatches between the HZO films and silicon substrates. Furthermore, these results demonstrate a device-scale means to quantify biaxial stress for investigation on its effect on the ferroelectric properties of hafnia-based materials.

36 MATERIALS SCIENCE↗

Structure-Composition Subtleties in NaZn 13 -type Derivatives of Sr/Ca(Au x Al 1– x ) 12–13

In the ternary (Sr/Ca)-Au-Al phase space for 5–8 at % Sr/Ca and nearly equimolar mixture of Au and Al, five new NaZn 13 -derivatives Sr/Ca(Au x Al 1–x ) 12–13 were discovered and their atomic site preferences and electronic structures were studied: (1) at higher Au content, cubic SrAuxAl 13–x [7.24(2) ≥ x ≥ 6.68(2)] shows no obvious atomic site preferences; (2) at lower Au content, tetragonal SrAu x Al 13–x [6.59(1) ≥ x ≥ 6.35(3)] shows icosahedra exclusively centered by Al and preferential atomic arrangements to maximize the number of Au–Al (or Al-rich) shortest distances; (3) a monoclinic SrAu 6.10(3) Al 6.40 compound was uncovered from studies of a single crystal specimen with problematic refinement issues but more detailed powder X-ray diffraction analysis which suggest even more pronounced geometric distortion from the NaZn 13 -type structure as well as preferential arrangements for Au–Al nearest contacts; (4) tetragonal SrAu 5.75(2) Al 6.25 with all empty icosahedra; and (5) orthorhombic CaAu 6.09(2) Al 6.01(1) with icosahedra that are half empty and half partially occupied by Al. Electronic DOS and COHP curves were used to rationalize the structural depiction of Sr/Ca(Au x Al 1–x ) 12–13 as icosahedra packing of (Au x Al 1–x) 12–13 with voids filled by the electropositive Sr/Ca.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intrinsic reactivity and dissolution characteristics of tetracalcium aluminoferrite

Tetracalcium aluminoferrite is one of the main phases of Portland cement, the dissolution characteristics of which however have not been fully revealed. This work adopted first-principles calculations and Mössbauer spectroscopy as well as X-ray diffraction analysis to clarify the intrinsic reactivity of different species of tetracalcium aluminoferrite crystals. Ca ions are the most reactive species of tetracalcium aluminoferrite and Al ions are slightly more reactive than Fe ions. Moreover, the tetrahedral Al and Fe ions are more reactive than the octahedral Al and Fe ions. These indicate dissolution characteristics of tetracalcium aluminoferrite crystals, namely, Ca ions dissolve first and the tetrahedral species dissolve faster than the octahedral species. After the initial dissolution, the dissolved ions nucleate and grow on the defective surface of C{sub 4}AF and the C{sub 4}AF residues are fully hydroxylated. The further hydration thereafter becomes the complex dissolution with the nucleation and growth of hydration products.

36 MATERIALS SCIENCE↗

Structural features of 11 synthetic bacteriochlorins — comparisons with chlorins and porphyrins

As part of a program to develop the fundamental science of synthetic bacteriochlorins — analogues of Nature’s light-harvesting pigments in anoxygenic photosynthesis — 11 synthetic free base bacteriochlorins have been examined by single-crystal X-ray diffraction analysis. In each bacteriochlorin, each pyrroline ring contains a gem-dimethyl group to block adventitious (aerobic) dehydrogenation. The structural features of the bacteriochlorins (tetrahydroporphyrins) are compared with the less saturated counterparts, chlorins (dihydroporphyrins) and porphyrins. Only slight structural perturbation accrues due to the presence of the gem-dimethyl groups. Furthermore, the results presented herein may aid in understanding metal chelation processes and underpin the development of functional solid-state molecular assemblies.

X-ray diffraction↗

Stress-sensitivity of fracture conductivity of Tuscaloosa Marine Shale cores

Production decline from wells producing from shale rocks is typically quite rapid. One possible factor responsible for such decline is loss in fracture conductivity. This is true in the case of the Tuscaloosa Marine shale reservoir. In this work, the stress-dependent fracture conductivity of TMS core samples is investigated using five propped cores under varying stress conditions. In addition, the effects of static rock mechanical properties and rock mineralogy on conductivity decline are investigated. The mineralogy of each core sample was determined by X-ray Diffraction analysis. Fracture conductivity was measured using a Hassler-type pressure core holder with a pressure rating of 15,000 psi (103.42 MPa). Estimated rock mechanical properties showed that shale anisotropy could affect fracture conductivity. The time decline in conductivity revealed two possible decline trends, a) decline from the reduction in induced fracture width, and b) decline from the healing of developed micro-cracks. An exponential decline in fracture conductivity with increasing confinement pressure was observed with an average decline rate constant of 3.15 x 10 -10 mPa -1 . While rock mineralogy did not have any clear relationship with conductivity decline, the effects of rock mechanical properties were only important at 10.34 MPa confinement pressure and above. The observation showed that a high Young's modulus correlate to high conductivity, whereas a high Poisson's ratio correlate to low conductivity. This study provides useful observations for optimizing fracture design to enhance well productivity in the TMS.

02 PETROLEUM↗

Synthesis and anisotropic magnetism in quantum spin liquid candidates A YbSe 2 ( A = K and Rb)

The quantum spin liquid (QSL) state in rare-earth triangular lattices has attracted much attention recently due to its potential application in quantum computing and communication. Here, we report the single-crystal growth synthesis, crystal structure characterizations, and magnetic properties of AYbSe 2 (A = K and Rb) compounds. The x-ray diffraction analysis shows that AYbSe 2 (A = K and Rb) crystallizes in a trigonal space group, R-3m (No. 166) with Z = 3. AYbSe 2 possesses a two-dimensional (2D) Yb–Se–Yb layered structure formed by edged-shared YbSe 6 octahedra. The magnetic properties are highly anisotropic for both title compounds, and no long-range order is found down to 0.4 K, revealing the possible QSL ground state in these compounds. The isothermal magnetization exhibits a one-third magnetization plateau when the magnetic fields are applied in the ab-plane. Heat capacity is performed along both ab-plane and c axis and features the characteristic dome for triangular magnetic lattice compounds as a function of magnetic fields. Due to the change in the interlayer and intralayer distance of Yb 3+ , the dome shifts to low fields from KYbSe 2 to RbYbSe 2 . All these results indicate that the AYbSe 2 family presents unique frustrated magnetism close to the possible QSL and noncollinear spin states.

36 MATERIALS SCIENCE↗

Effect of Lithium Doping on MgO Hydroxylation and Carbonation

Recovery of magnesium from brines can potentially be used to source MgO (periclase) as a CO 2 sorbent or for Mg-based cements. However, it is not clear how common impurities in brines, such as lithium, affect the resulting MgO reactivity. Here, to test the effect of lithium incorporation on MgO reactivity for hydration and carbonation, we combined computational simulations with experiments. Experimentally altered (Mg,Li)O with a low dopant concentration (0.012 ± 0.002% w/w Li) was characterized using synchrotron-based X-ray scattering and high-resolution electron microscopy to measure reaction layer formation on (Mg,Li)O. Single-crystal X-ray diffraction analysis of (Mg,Li)O demonstrates that the incorporation of lithium leads to the formation of oxygen vacancies. The presence of vacancies is likely causing faster hydroxylation rates as predicted by ab initio molecular dynamics simulations. However, the faster hydroxylation rates likely lead to faster passivation of the surface because we observe thinner reaction layers on (Mg,Li)O samples both over short time periods (30 days) and over long time periods (28 years). After 28 years, the reaction layer on the (Mg,Li)O sample was less than one-third of the thickness of that of the pure MgO sample. In addition, over 30 days, reaction layers on (Mg,Li)O samples primarily formed at steps rather than on terraces, in contrast to our previous observations on MgO. Based on our results, naturally occurring impurities in MgO modify its reactivity even at very low concentrations and need to be considered for accurate reaction rate prediction for application of MgO as a CO 2 sorbent or in cements.

MgO↗

Titanium Dioxide Nanomaterial Ink Production Through Laser Ablation Synthesis in Solution for Printed Electronics Applications

Flexible and printed electronics have become increasingly popular as they make possible the production of flexible, low-cost, multifunction devices that are unachievable through traditional manufacturing methods. The printed films are significantly impacted and thus limited by the existing ink production process. Herein, an alternate technique of generating high-quality titanium dioxide (TiO 2 ) nanoparticle ink compatible with aerosol jet printing using laser ablation synthesis in solution (LASiS) is showcased. Dynamic light scattering data and transmission electron microscopy confirm the particle size distribution. UV–vis measurements are performed, and the Beer–Lambert relationship is used to determine the concentration of the generated ink. The inks generated at two different repetition rates are compared: 200 kHz and 1 MHz. X-Ray diffraction analysis of the aerosol jet printed thin film post-thermal sintering confirms the grain size and phase purity of the printed thin films. This work demonstrates the effectiveness of the LASiS technique in producing printable nanoparticle inks with little-to-no postprocessing.

36 MATERIALS SCIENCE↗

Few‐Unit‐Cell MFI Zeolite Synthesized using a Simple Di‐quaternary Ammonium Structure‐Directing Agent

Abstract Synthesis of a pentasil‐type zeolite with ultra‐small few‐unit‐cell crystalline domains, which we call FDP (few‐unit‐cell crystalline domain pentasil), is reported. FDP is made using bis‐1,5(tributyl ammonium) pentamethylene cations as structure directing agent (SDA). This di‐quaternary ammonium SDA combines butyl ammonium, in place of the one commonly used for MFI synthesis, propyl ammonium, and a five‐carbon nitrogen‐connecting chain, in place of the six‐carbon connecting chain SDAs that are known to fit well within the MFI pores. X‐ray diffraction analysis and electron microscopy imaging of FDP indicate ca. 10 nm crystalline domains organized in hierarchical micro‐/meso‐porous aggregates exhibiting mesoscopic order with an aggregate particle size up to ca. 5 μm. Al and Sn can be incorporated into the FDP zeolite framework to produce active and selective methanol‐to‐hydrocarbon and glucose isomerization catalysts, respectively.

Lu, Peng↗

Few‐Unit‐Cell MFI Zeolite Synthesized using a Simple Di‐quaternary Ammonium Structure‐Directing Agent

Abstract Synthesis of a pentasil‐type zeolite with ultra‐small few‐unit‐cell crystalline domains, which we call FDP (few‐unit‐cell crystalline domain pentasil), is reported. FDP is made using bis‐1,5(tributyl ammonium) pentamethylene cations as structure directing agent (SDA). This di‐quaternary ammonium SDA combines butyl ammonium, in place of the one commonly used for MFI synthesis, propyl ammonium, and a five‐carbon nitrogen‐connecting chain, in place of the six‐carbon connecting chain SDAs that are known to fit well within the MFI pores. X‐ray diffraction analysis and electron microscopy imaging of FDP indicate ca. 10 nm crystalline domains organized in hierarchical micro‐/meso‐porous aggregates exhibiting mesoscopic order with an aggregate particle size up to ca. 5 μm. Al and Sn can be incorporated into the FDP zeolite framework to produce active and selective methanol‐to‐hydrocarbon and glucose isomerization catalysts, respectively.

36 MATERIALS SCIENCE↗

A Heteromeric Carboxylic Acid Based Single-Crystalline Crosslinked Organic Framework

The development of large pore single-crystalline covalently linked organic frameworks is critical in revealing the detailed structure-property relationship with substrates. One emergent approach is to photo-crosslink hydrogen-bonded molecular crystals. Introducing complementary hydrogen-bonded carboxylic acid building blocks is promising to construct large pore networks, but these molecules often form interpenetrated networks or non-porous solids. In this report we introduced heteromeric carboxylic acid dimers to construct a non-interpenetrated molecular crystal. Crosslinking this crystal precursor with dithiols afforded a large pore single-crystalline hydrogen-bonded crosslinked organic framework H C OF-101. X-ray diffraction analysis revealed H C OF-101 as an interlayer connected hexagonal network, which possesses flexible linkages and large porous channels to host a hydrazone photoswitch. Multicycle Z/E-isomerization of the hydrazone took place reversibly within H C OF-101, showcasing the potential use of H C OF-101 for optical information storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Burning magnesium in carbon dioxide for highly effective phosphate removal

Magnesium oxide was found to have high-phosphate-affinity as an effective component to enhance the phosphate removal ability of common adsorbent materials. However, the currently prepared MgO-based hybrid adsorbents by conventional methods still suffer from the limited low loading of MgO and inferior removal performances, much far away from practical application. In this study, an ingenious carbon coated MgO nanocomposite is designed by directly burning magnesium in CO 2 , a well-known textbook reaction. X-ray diffraction analysis, scanning electron microscope and aberration-corrected high-resolution transmission electron microscope demonstrate the sample is well prepared. Consequently, the high content of nanosized MgO combined with defect-rich carbon layer brings unprecedented phosphate removal capacity of 1135.0 mg/g, removal rate of 99% and benign compatibility with coexisting anions and solution pH. Furthermore, the removal mechanism is also investigated in detail by characterizing the sample before and after adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the Influence of Diverse Secondary Metal Cations on Redox-Active Palladium Complexes

Incorporation of redox-inactive metals into redox-active complexes and catalysts attracts attention for engendering new reactivity modes, but this strategy has not been extensively investigated beyond the first-row of the transition metals. In this report the isolation and characterization of the first series of heterobimetallic complexes of palladium with mono-, di-, and tri-valent redox-inactive metal ions are reported. A Reinhoudt-type heteroditopic ligand with a salen-derived [N 2 ,O 2 ] binding site for Pd and a crown-ether-derived [O 6 ] site has been used to prepare isolable adducts of the Lewis acidic redox-inactive metal ions (M n+ ). Comprehensive data from single-crystal X-ray diffraction analysis reveal distinctive trends in the structural properties of the heterobimetallic species, including an uncommon dependence of the Pd … M distance on Lewis acidity. The reorganization energy associated with reduction of the heterobimetallic species is strongly modulated by Lewis acidity, with the slowest heterogeneous electron transfer kinetics associated with the strongest incorporated Lewis acids. This hitherto unexplored reorganization energy penalty for electron transfer contrasts with prior thermodynamic studies, revealing that kinetic parameters should be considered in studies of reactivity involving heterobimetallic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amphiphilic Peptoid–Directed Assembly of Oligoanilines into Highly Crystalline Conducting Nanotubes

It is reported herein the synthesis of a novel amphiphilic diblock peptoid bearing a terminal conjugated oligoaniline and its self-assembly into small-diameter (D ≈ 35 nm) crystalline nanotubes with high aspect ratios (>30). It is shown that both tetraaniline (TANI)-peptoid and bianiline (BANI)-peptoid triblock molecules self-assemble in solution to form rugged highly crystalline nanotubes that are very stable to protonic acid doping and de-doping processes. The similarity of the crystalline tubular structure of the nanotube assemblies revealed by electron microscopy imaging, and X-ray diffraction analysis of the nanotube assemblies of TANI-functionalized peptoids and nonfunctionalized peptoids showed that the peptoid is an efficient ordered structure directing motif for conjugated oligomers. Films of doped TANI-peptoid nanotubes has a dc conductivity of ca. 95 mS cm –1 , while the thin films of doped un-assembled TANI-peptoids show a factor of 5.6 lower conductivity, demonstrating impact of the favorable crystalline ordering of the assemblies on electrical transport. Furthermore, these results demonstrate that peptoid-directed supramolecular assembly of tethered π-conjugated oligo(aniline) exemplify a novel general strategy for creating rugged ordered and complex nanostructures that have useful electronic and optoelectronic properties.

conducting nanotubes↗

Block copolymer-mediated synthesis of TiO2/RuO2 nanocomposite for efficient oxygen evolution reaction

Abstract An amphiphilic block copolymer, poly (styrene-2-polyvinyl pyridine-ethylene oxide), was used as a structure-directing and stabilizing agent to synthesize TiO 2 /RuO 2 nanocomposite. The strong interaction of polymers with metal precursors led to formation of a porous heterointerface of TiO 2 /RuO 2 . It acted as a bridge for electron transport, which can accelerate the water splitting reaction. Scanning electron microscopy, energy-dispersive X -ray spectroscopy, transmission electron microscopy, and X -ray diffraction analysis of TiO 2 /RuO 2 samples revealed successful fabrication of TiO 2 /RuO 2 nanocomposites. The TiO 2 /RuO 2 nanocomposites were used to measure electrochemical water splitting in three-electrode systems in 0.1-M KOH. Electrochemical activities unveil that TiO 2 /RuO 2 -150 nanocomposites displayed superior oxygen evolution reaction activity, having a low overpotential of 260 mV with a Tafel slope of 80 mVdec −1 . Graphical abstract

36 MATERIALS SCIENCE↗

Synthesis of boron-carbide aerogels

We present the synthesis of boron carbide aerogels utilizing nano-boron powder and resorcinol–formaldehyde (RF) organic aerogels as precursors. Monolithic aerogels were fabricated from suspensions of boron nanoparticles and RF via an organic sol-gel process, enabling effective distribution of boron in the gel network. The resulting gels underwent supercritical drying, thermal reduction, and subsequent heat treatment to yield boron carbide aerogels with densities ranging from 37 to 55 mg/cm³. By tuning the boron-to-carbon ratio, heat treatment temperature, and dwell time, surface areas up to 53 m²/g were obtained. X-ray diffraction analysis confirmed the formation of the boron carbide phase and detected the presence of residual carbon within the structure.

Materials science↗