SEARCH · Search NASA
Results for “Yield”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Improving light yield measurements for low-yield scintillators
Light power spectra are introduced as a new tool for relative light yield (LY) determinations. Light event spectra have commonly been used for this purpose. Theoretical background supporting this change is provided. It is shown that the derivative of a light power spectrum can provide a reliable LY measurement at levels as low as 2% of those for high-yield liquid scintillators. In this work, applications to light evolution in the PPO+LAB system and to water-based liquid scintillators are described.
The calculation of light element impurity (α, n) yield curves in a PuO 2 matrix and associated specific yield coefficients: Influence of the reaction cross sections
Most of the Pu separated from irradiated commercial nuclear fuel is stored as PuO 2 . The primary quantitative nondestructive measurement technique used to verify the amount of Pu in storage containers is passive neutron correlation counting. An important physical property of the oxide material is the ratio, α, of the rate of (α, n) neutrons produced inside the item to the rate of neutrons produced by spontaneous fission. This ratio influences the precision of the correlated counting method and affects the interpretation of the data because of how it changes both the primary total neutron production rate and the rate of induced fission events taking place inside the item. In addition to the main O(α, n) contribution, additional contributions come from α-particle interactions with light element impurities that are inevitably present. In this work, we calculate specific (α, n) yield coefficients, expressed in units of neutrons per second per gram of α-emitting nuclide per part per million by mass of the specified impurity element distributed in a pure PuO 2 matrix, for some key α-emitting actinides commonly present in reprocessed Pu ( 238–242 Pu+ 241 Am). These coefficients are directly applicable to nuclear safeguards verification work in which the α ratio is often calculated from the Pu-isotopic composition and chemical information obtained by other means. Further, they also provide a convenient up-to-date reference set against which values generated by other methods can be compared. Results are presented for impurities with atomic number from 3 to 17 inclusive, plus K and Fe. In most cases, these coefficients are not expected to change by more than 5%–10% at any time in the future. However, as new data become available, changes as large as 20% may be needed for some targets (e.g., F). The present yield calculations are limited by the general shortage of quality experimental total (α, n) reaction cross section data, which, together with unexplained variation between determinations, means that an objective and coherent evaluation is not possible. The situation is even less satisfactory for the partial differential cross section needed to calculate neutron spectra.
Acceleration and Stabilization of Electron Transfer Products with Improved Quantum Yields upon Cation Binding to a Fused Bis-Zinc Porphyrin-Quinone Donor–Acceptor Conjugate
The role of metal ions in promoting electron transfer processes in biological coenzymes is of great significance not only to understand their mechanistic details but also due to their direct utilization in a number of chemical and biochemical processes. Here, we demonstrate an increased rate of forward electron transfer with improved reaction quantum yield, and an enhanced lifetime of electron transfer products upon cation binding to the acceptor entity in a donor-acceptor conjugate. Selective binding of cations such as Mg 2+ or Sc 3+ to the electron acceptor, quinone, in a fused, bis-zinc porphyrin-quinone donor-acceptor conjugate leads to facile reduction of the quinone making the electron transfer process thermodynamically highly feasible. Furthermore, the binding of metal ions to the electron transfer product, quinone anion, decelerates the reverse electron transfer process due to ion-pairing interactions, resulting in improving both the lifetime and quantum yields of the electron transfer products. Furthermore, systematic studies including spectral, electrochemical, computational, spectroelectrochemical, and transient absorption techniques, coupled with data analysis by Global Target Analysis (GloTarAn), are performed to demonstrate these novel findings that are relevant to further our understanding of electron transfer processes occurring in biological coenzymes and pertinent energy harvesting schemes.
Tripled yield in direct-drive laser fusion through statistical modelling [Tripling the yield in direct-drive laser fusion via predictive statistical modeling]
Focusing laser light onto a very small target can produce the conditions for laboratory-scale nuclear fusion of hydrogen isotopes. The lack of accurate predictive models, which are essential for the design of high-performance laser-fusion experiments, is a major obstacle to achieving thermonuclear ignition. Here we report a statistical approach that was used to design and quantitatively predict the results of implosions of solid deuterium–tritium targets carried out with the 30-kilojoule OMEGA laser system, leading to tripling of the fusion yield to its highest value so far for direct-drive laser fusion. When scaled to the laser energies of the National Ignition Facility (1.9 megajoules), these targets are predicted to produce a fusion energy output of about 500 kilojoules—several times larger than the fusion yields currently achieved at that facility. As a result, this approach could guide the exploration of the vast parameter space of thermonuclear ignition conditions and enhance our understanding of laser-fusion physics.
Maximizing neutron yields by scaling hollow diameter of a dense plasma focus anode [Neutron yield maximization and anode surface damage characterization by scaling hollow diameters of a DPF anode]
Experiments were performed to maximize the neutron yield from a 2 kJ dense plasma focus (DPF) and characterize the amount of copper sputtered from the surface of an anode by varying the diameter of the anodes’ on-axis hollow. The hollow is a void in the copper material along the longitudinal axis of the anode. All the anodes had an outer diameter of 1.2 in. and the diameter of the hollow varied from 0 in. (no hollow) to 1 in. The anodes with a hollow produced a greater number of neutrons per discharge than the anode without a hollow. Over 40 discharges, the hollow anode that yielded the most neutrons (9.1±0.4×10 6 neutrons per discharge produced with the 0.75 in. hollow) produced >6 times more neutrons than the anode with no hollow. A qualitative observation of the anodes after 130 discharges showed less surface damage on anodes with a larger hollow. Quantitative sputter measurements were performed by characterizing the amount of copper sputtered onto on-axis quartz targets for three newly machined anodes, each with a particular hollow diameter. The quantitative results matched the qualitative observations: the copper sputter was reduced using larger hollows. Finally, the largest hollow sputtered 17±1.0 nm/sr/discharge of copper, a reduction of 69% compared to the anode with the most damage.
Calculation of monomer yields, verification of PG concentration approximation, catalyst comparison for neat aromatic RCF, SEM micrographs for postreaction pulps, yields of aqueous-phase sugar derivatives after PG-H2O RCF, reactor pressure transients, GPC comparing pre- and postreaction organic solvent composition, PG-H2O miscibility testing, GPC probing dimer/oligomer fractionation in PG-H2O mixtures for
Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.
A photoionization study of the charge transfer reactions - Xe/+/ + O2 yields O2/+/ + Xe and O2/+/ + Xe yields Xe/+/ + O2
The charge transfer reactions: Xe(+) + O2 yields O2(+) + Xe and O2(+) + Xe yields Xe(+) + O2 were studied using photoionization mass spectroscopy. It is shown that the reaction of Xe(+)(2P-3/2) ions with O2 molecules is much more efficient than the reaction of Xe(+)(2P-1/2) ions with O2 molecules. The charge transfer reaction of O2(+) ions with Xe atoms was detected for O2(+) ions in the a 4Pi-u state.
Theoretical characterization of the potential energy surface for the reversible reaction H + O2 yields HO2(asterisk) yields OH + O. III - Computed points to define a global potential energy surface
Computed energies and geometries are reported which, combined with previously published calculations, permit a global representation of the potential energy surface for the reaction H + O2 yields HO2(asterisk) yields OH + O. These new calculations characterize the potential energy surface (PES) for all H atom angles of approach to O2 and for the region of the inner repulsive wall. The region of the T-shaped H-O2 exchange saddle point is connected with the constrained energy minimum (CEM) path, and a new collinear H-O2 exchange saddle point is characterized which lies only 9 kcal/mol above the H + O2 asymptote. A vibrational analysis which utilizes local cubic and quartic polynomial representations of the PES along the CEM path has been carried out. Optimal geometries, energies, and harmonic frequencies are reported along with anharmonic analyses for the O2 and OH asymptotes and for the HO2 minimum region of the PES.
Computed barrier heights for H + CH2O yields CH3O yields CH2OH
The barrier heights (including zero-point effects) for H + CH2O yields CH3O and CH3O yields CH2OH have been computed using complete active space self consistent field (CASSCF)/gradient calculations to define the stationary point geometries and harmonic frequencies and internally contracted configuration-interaction (CCI) to refine the energetics. The computed barrier heights are 5.6 kcal/mol and 30.1 kcal/mol, respectively. The former barrier height compares favorably to an experimental activation energy of 5.2 kcal/mol.
Computed barrier heights for H + CH2O yields CH3O yields CH2OH
The barrier heights (including zero-point effects) for H + CH2O yields CH3O and CH3O yields CH2OH have been computed using complete active space self consistent field (CASSCF)/gradient calculations to define the stationary point geometries and harmonic frequencies and internally contracted configuration-interaction (CCI) to refine the energetics. The computed barrier heights are 5.6 kcal/mol and 30.1 kcal/mol, respectively. The former barrier height compares favorably to an experimental activation energy of 5.2 kcal/mol.
Heterogeneous Reactions of HNO3(g) + NaCl(s) Yields HCL(g) + NaNO3(s) and N2O5(g) + NaCl(s) Yields ClNo2(g) + NaNO3(s)
The heterogeneous reactions of HNO3(g) + NaCl(s) Yields HCL(g) + NaNO3(s) and N2O5(g) + NaCl(s) Yields ClNo2(g) + NaNO3(s)were investigated over a temperature range of 223-296 K in a flow-tube reactor coupled to a quadrupole mass spectrometer. The implications for volcanic enhancement of the HCl and HNO3 column density in the lower stratosphere are discussed.
Determination of O2(a1Delta g) and O2(b1Sigma + g) yields in the reaction O + ClO yields Cl + O2 - Implications for photochemistry in the atmosphere of Venus
A discharge flow apparatus with a chemiluminescence detector was used to investigate the reaction O + ClO yields Cl + O2(asterisk), where O2(asterisk) = O2(a1Delta g) or O2(b1Sigma + g). It is found that the observed O2(a1Delta g) airglow of Venus cannot be explained in the framework of standard photochemistry using the experimental results obtained here and those reported in the recent literature. The possibility of an alternative source of O atoms derived from SO2 photolysis in the Venus mesosphere is suggested.
Temperature-Dependent Kinetics Studies of the Reactions Br((sup 2)P3/2) + H2S yields SH + HBr and Br((sup 2)P3/2) + CH3SH yields CH3S + HBr. Heats of Formation of SH and CH3S Radicals
Time resolved resonance fluorescence detection of Br(sup 2)P3/2) atom disappearance or appearance following 266-nm laser flash photolysis of CF2Br2/H2S/H2/N2, CF2Br2/CH3SH/H2/N2, Cl2CO/H2S/HBr/N2, and CH3SSCH3/HBr/H2/N2 mixtures has been employed to study the kinetics of the reactions Br((sup 2)P3/2) + H2S = SH + HBr (1,-1) and Br((sup2)P3/2) + CH3SH = CH3S + HBr (2, -2) as a function of temperature over the range 273-431K. Arrhenius expressions in units of 10(exp -12) cu cm/molecule/s which describe the results are k1 = (14.2 +/- 3.4) exp[(-2752 +/- 90)/T],(k-1) = (4.40 +/- 0.92) exp[(-971 +/- 73)/T],k(2) = (9.24 +/- 1.15) exp[(-386 +/- 41)/T], and k(-2) = (1.46 +/-0.21) exp[(-399 +/-41)/T; errors are 2 sigma and represent precision only. By examining Br((sup 2)P3/2) equilibrium kinetics following 355nm laser flash photolysis of Br2/CH3SH/H2/N2 mixtures, a 298 K rate coefficient of (1.7 +/- 0.5) x 10(exp -10) cu cm/molecule/s has been obtained for the reaction CH3S + Br2 yields CH3SBr + Br. To our knowledge, these are the first kinetic data reported for each of the reactions studied. Measured rate coefficients, along with known rate coefficients for similar radical + H2S, CH3SH, HBr,Br2 reactions are considered in terms of possible correlations of reactivity with reaction thermochemistry and with IP - EA, the difference between the ionization potential of the electron donor and the electron affinity of the electron acceptor. Both thermochemical and charge-transfer effects appear to be important in controlling observed reactivities. Second and third law analyses of the equilibrium data for reactions 1 and 2 have been employed to obtain the following enthalpies of reaction in units of kcal/mol: for reaction 1, Delta-H(298) = 3.64 +/- 0.43 and Delta-H(0) = 3.26 +/-0.45; for reaction 2, Delta-H(298) = -0.14 +/- 0.28 and Delta-H(0) = -0.65 +/- 0.36. Combining the above enthalpies of reaction with the well-known heats of formation of Br, HBr, H2S, and CH3SH gives the following heats of formation for the RS radicals in units of kcal/mol: Delta-H(sub f)(sub 0)(SH) = 34.07 +/- 0.72, Delta-H(sub f)(sub 298)(SH) = 34.18 +/- 0.68, Delta-H(sub f)(sub 0)(CH3S) = 31.44 +/- 0.54, Delta-H(sub f)(sub 298)(CH3S) = 29.78 +/- 0.44; errors are 2 sigma and represent estimates of absolute accuracy. The SH heat of formation determined from our data agrees well with literature values but has reduced error limits compared to other available values. The CH3S heat of formation determined from our date is near the low end of the range of previous estimates and is 3-4 kcal/mol lower than values derived from recent molecular beam photofragmentation studies.