Search NASA⌕ Search

SEARCH · Search NASA

Results for “Z TRANSFORM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Tailored Excitation for Multivariable Stability-Margin Measurement Applied to the X-31A Nonlinear Simulation

Safety and productivity of the initial flight test phase of a new vehicle have been enhanced by developing the ability to measure the stability margins of the combined control system and vehicle in flight. One shortcoming of performing this analysis is the long duration of the excitation signal required to provide results over a wide frequency range. For flight regimes such as high angle of attack or hypersonic flight, the ability to maintain flight condition for this time duration is difficult. Significantly reducing the required duration of the excitation input is possible by tailoring the input to excite only the frequency range where the lowest stability margin is expected. For a multiple-input/multiple-output system, the inputs can be simultaneously applied to the control effectors by creating each excitation input with a unique set of frequency components. Chirp-Z transformation algorithms can be used to match the analysis of the results to the specific frequencies used in the excitation input. This report discusses the application of a tailored excitation input to a high-fidelity X-31A linear model and nonlinear simulation. Depending on the frequency range, the results indicate the potential to significantly reduce the time required for stability measurement.

Bosworth, John T.↗

Sampled-Data Techniques Applied to a Digital Controller for an Altitude Autopilot

Sampled-data theory, using the Z transformation, is applied to the design of a digital controller for an aircraft-altitude autopilot. Particular attention is focused on the sensitivity of the design to parameter variations and the abruptness of the response, that is, the normal acceleration required to carry out a transient maneuver. Consideration of these two characteristics of the system has shown that the finite settling time design method produces an unacceptable system, primarily because of the high sensitivity of the response to parameter variations, although abruptness can be controlled by increasing the sampling period. Also demonstrated is the importance of having well-damped poles or zeros if cancellation is attempted in the design methods. A different method of smoothing the response and obtaining a design which is not excessively sensitive is proposed, and examples are carried through to demonstrate the validity of the procedure. This method is based on design concepts of continuous systems, and it is shown that if no pole-zero cancellations are allowed in the design, one can obtain a response which is not too abrupt, is relatively insensitive to parameter variations, and is not sensitive to practical limits on control-surface rate. This particular design also has the simplest possible pulse transfer function for the digital controller. Simulation techniques and root loci are used for the verification of the design philosophy.

Schmidt, Stanley F.↗

Absence of diurnal variation of C-reactive protein concentrations in healthy human subjects

BACKGROUND: The concentration of C-reactive protein (CRP) in otherwise healthy subjects has been shown to predict future risk of myocardial infarction and stroke. CRP is synthesized by the liver in response to interleukin-6, the serum concentration of which is subject to diurnal variation. METHODS: To examine the existence of a time-of-day effect for baseline CRP values, we determined CRP concentrations in hourly blood samples drawn from healthy subjects (10 males, 3 females; age range, 21-35 years) during a baseline day in a controlled environment (8 h of nighttime sleep). RESULTS: Overall CRP concentrations were low, with only three subjects having CRP concentrations >2 mg/L. Comparison of raw data showed stability of CRP concentrations throughout the 24 h studied. When compared with cutoff values of CRP quintile derived from population-based studies, misclassification of greater than one quintile did not occur as a result of diurnal variation in any of the subjects studied. Nonparametric ANOVA comparing different time points showed no significant differences for both raw and z-transformed data. Analysis for rhythmic diurnal variation using a method fitting a cosine curve to the group data was negative. CONCLUSIONS: Our data show that baseline CRP concentrations are not subject to time-of-day variation and thus help to explain why CRP concentrations are a better predictor of vascular risk than interleukin-6. Determination of CRP for cardiovascular risk prediction may be performed without concern for diurnal variation.

Non-NASA Center↗

Estimation of Signal Coherence Threshold and Concealed Spectral Lines Applied to Detection of Turbofan Engine Combustion Noise

Combustion noise from turbofan engines has become important, as the noise from sources like the fan and jet are reduced. An aligned and un-aligned coherence technique has been developed to determine a threshold level for the coherence and thereby help to separate the coherent combustion noise source from other noise sources measured with far-field microphones. This method is compared with a statistics based coherence threshold estimation method. In addition, the un-aligned coherence procedure at the same time also reveals periodicities, spectral lines, and undamped sinusoids hidden by broadband turbofan engine noise. In calculating the coherence threshold using a statistical method, one may use either the number of independent records or a larger number corresponding to the number of overlapped records used to create the average. Using data from a turbofan engine and a simulation this paper shows that applying the Fisher z-transform to the un-aligned coherence can aid in making the proper selection of samples and produce a reasonable statistics based coherence threshold. Examples are presented showing that the underlying tonal and coherent broad band structure which is buried under random broadband noise and jet noise can be determined. The method also shows the possible presence of indirect combustion noise. Copyright 2011 Acoustical Society of America. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the Acoustical Society of America.

Miles, Jeffrey Hilton↗

Rapid Variability of Mrk 421 During Extreme Flaring as Seen Through the Eyes of XMM-Newton

By studying the variability of blazars across the electromagnetic spectrum, it is possible to resolve the underlying processes responsible for rapid flux increases, so-called flares. We report on an extremely bright X-ray flare in the high-peaked BL Lacertae object Markarian 421 (Mrk 421) that occurred simultaneously with enhanced γ-ray activity detected at very high energies by First G-APD Cherenkov Telescope on 2019 June 9. We triggered an observation with XMM–Newton, which observed the source quasi-continuously for 25 h. We find that the source was in the brightest state ever observed using XMM–Newton, reaching a flux of 2.8 × 10 −9 erg cm -2 s -1 over an energy range of 0.3–10 keV. We perform a spectral and timing analysis to reveal the mechanisms of particle acceleration and to search for the shortest source-intrinsic time-scales. Mrk 421 exhibits the typical harder-when-brighter behaviour throughout the observation and shows a clock-wise hysteresis pattern, which indicates that the cooling dominates over the acceleration process. While the X-ray emission in different sub-bands is highly correlated, we can exclude large time lags as the computed z-transformed discrete correlation functions are consistent with a zero lag. We find rapid variability on time-scales of 1 ks for the 0.3–10 keV band and down to 300 s in the hard X-ray band (4–10 keV). Taking these time-scales into account, we discuss different models to explain the observed X-ray flare, and find that a plasmoid-dominated magnetic reconnection process is able to describe our observation best.

acceleration of particles↗

The Cognition Battery: Developing a Normative Database for Spaceflight and Examining the Impact of Prolonged Isolation and Confinement on Cognitive Performance

INTRODUCTION: Astronauts on future long duration space exploration will be required to execute complex tasks in which even minor errors could have devastating consequences. Intact cognition is critical to maintain exceptional performance standards and it is possible that variability even at the highest ends of the performance spectrum will impact operational tasks. Exposure to spaceflight hazards could compromise cognitive performance, and decrements have been documented under conditions of altered gravity and radiation exposure. The cognitive impacts of prolonged isolation and confinement remain relatively unknown. Traditional neuropsychological assessments cannot support earth independent monitoring, do not have normative comparisons for high functioning individuals, and most are not sensitive enough to detect small performance decrements. The Cognition Battery was developed to address these limitations but currently lacks comprehensive normative data. In this project, we aimed to 1) develop a preliminary normative database for astronauts and astronaut surrogates using the Cognition Battery, and 2) characterize differences in cognitive performance after short and long duration analog missions. PARTICIPANTS & METHODS: We assessed baseline cognitive performance by administering the Cognition Battery to 97 astronaut and astronaut surrogates recruited to approximate astronaut demographics (mean age: 39.38, SD=7.62; 35.1% female; 91.7% advanced degrees). For aim 1, we calculated speed and accuracy outcomes for each subtest and summarized the data with descriptive statistics. We examined the relationship between age and performance with Pearsons’s correlations and the relationship between gender and performance with independent samples t-tests. A subset of individuals on short duration (n=48; mean age: 38.18, SD=7.14; 37.5% female; 91.7% advanced degrees) missions of 45 days and long duration (n=34; mean age: 42.12, SD=8.39; 38.2% female; 94.1% advanced degrees) missions ranging from 4-8 months were administered the Cognition Battery during and after their respective missions. For aim 2, we accounted for practice effects using published corrections, and z-transformed post-mission scores using the full sample’s baseline scores. One-way analysis of covariance tests determined the main effect of analog duration on post-mission performance, after accounting for age and gender. The False Discovery Rate method was applied to adjust for multiple comparisons. RESULTS: In the full normative sample, older age was associated with slower reaction times on a processing speed task (r=.39, p=.02), and men were more accurate on processing speed (t=-2.19, p=.03) and faster on sustained attention (t=2.02, p=.049) and risk-taking tasks (t=2.49, p=.02). We observed a main effect of duration on performance on tasks of visual memory (f(1)=5.62, p=.04), processing speed (f(1)=5.48, p=.03), and sensorimotor functioning (f(1)=39.52, p < .001), such that slower performance was observed after long duration missions relative to short. Only sensorimotor functioning was significant after adjustments for multiple comparisons (adjusted p<.001). DISCUSSION: The full sample represents the largest dataset of cognitive performance assessed by the Cognition Battery available and can be used for further research in spaceflight and high-performance populations. Relationships between performance and key demographic variables suggest future research that include age and gender stratification is needed. Our results also show minimal changes in cognitive performance between longer and shorter periods of isolation and confinement.

S I Dev↗

Linear Transformer Drivers for Z-pinch Based Propulsion

The MSFC/UAH team has been developing of a novel power management and distribution system called a Linear Transformer Driver (LTD). LTD's hold the promise of dramatically reducing the required mass to drive a z-pinch by replacing the capacitor banks which constitute half the mass of the entire system. The MSFC?UAH tea, is developing this technology in hope of integrating it with the Pulsed Fission Fusion (PuFF) propulsion concept. High-Voltage pulsed power systems used for Z-Pinch experimentation have in the past largely been based on Marx Generators. Marx generators deliver the voltage and current required for the Z-Pinch, but suffer from two significant drawbacks when applied to a flight system: they are very massive, consisting of high-voltage capacitor banks insulated in oil-filled tanks and they do not lend themselves to rapid pulsing. The overall goal of Phase 2 is to demonstrate the construction of a higher voltage stack from a number of cavities each of the design proven in Phase 1 and to characterize and understand the techniques for designing the stack. The overall goal of Phase 3 is to demonstrate the feasibility of constructing a higher energy cavity from a number of smaller LTD stacks, to characterize and understand the way in which the constituent stacks combine, and to extend this demonstration LTD to serve as the basis for a 64 kJ pulse generator for Z-Pinch experiments.

Adams, Robert↗

Analytic solution for vertical launch into orbit

An approximate analytic solution is presented for the motion and heating of nonlifting spacecraft launched vertically for ascending flight through the atmosphere into earth orbit. The solution is based on Chapman's Z-function transformation of the equations of motion with the assumption of an exponential atmosphere. The transformed equations have been modified to include the effects of thrusting with mass loss. It is assumed that the vehicle negotiates a gravity turn during ascent so that the thrust vector is aligned in the flight-path direction. Numerical results are presented to document the analytic solution and provide evidence of the useful information generated by it.

Boltz, Frederick W.↗

A Lightning Channel Retrieval Algorithm for the North Alabama Lightning Mapping Array (LMA)

A new multi-station VHF time-of-arrival (TOA) antenna network is, at the time of this writing, coming on-line in Northern Alabama. The network, called the Lightning Mapping Array (LMA), employs GPS timing and detects VHF radiation from discrete segments (effectively point emitters) that comprise the channel of lightning strokes within cloud and ground flashes. The network will support on-going ground validation activities of the low Earth orbiting Lightning Imaging Sensor (LIS) satellite developed at NASA Marshall Space Flight Center (MSFC) in Huntsville, Alabama. It will also provide for many interesting and detailed studies of the distribution and evolution of thunderstorms and lightning in the Tennessee Valley, and will offer many interesting comparisons with other meteorological/geophysical wets associated with lightning and thunderstorms. In order to take full advantage of these benefits, it is essential that the LMA channel mapping accuracy (in both space and time) be fully characterized and optimized. In this study, a new revised channel mapping retrieval algorithm is introduced. The algorithm is an extension of earlier work provided in Koshak and Solakiewicz (1996) in the analysis of the NASA Kennedy Space Center (KSC) Lightning Detection and Ranging (LDAR) system. As in the 1996 study, direct algebraic solutions are obtained by inverting a simple linear system of equations, thereby making computer searches through a multi-dimensional parameter domain of a Chi-Squared function unnecessary. However, the new algorithm is developed completely in spherical Earth-centered coordinates (longitude, latitude, altitude), rather than in the (x, y, z) cartesian coordinates employed in the 1996 study. Hence, no mathematical transformations from (x, y, z) into spherical coordinates are required (such transformations involve more numerical error propagation, more computer program coding, and slightly more CPU computing time). The new algorithm also has a more realistic definition of source altitude that accounts for Earth oblateness (this can become important for sources that are hundreds of kilometers away from the network). In addition, the new algorithm is being applied to analyze computer simulated LMA datasets in order to obtain detailed location/time retrieval error maps for sources in and around the LMA network. These maps will provide a more comprehensive analysis of retrieval errors for LMA than the 1996 study did of LDAR retrieval errors. Finally, we note that the new algorithm can be applied to LDAR, and essentially any other multi-station TWA network that depends on direct line-of-site antenna excitation.

Koshak, William↗

Inhomogeneous cosmology - Gravitational radiation in Bianchi backgrounds

An exact formalism is developed for describing cosmological models with strong, long wavelength gravitational waves of general polarization, propagating over backgrounds corresponding to Bianchi types I through VII. A new metric which exhibits the appropriate symmetries of two equivalent independent polarizations of gravitational waves is introduced and discussed. The formalism is applied to an empty type I cosmology, and it is shown how the original z-dependent chaotic singularity structure transforms itself into gravitational radiation propagating along the z-axis in a Bianchi I background.

Adams, P. J.↗

Computer program provides linear sampled- data analysis for high order systems

Computer program performs transformations in the order S-to W-to Z to allow arithmetic to be completed in the W-plane. The method is based on a direct transformation from the S-plane to the W-plane. The W-plane poles and zeros are transformed into Z-plane poles and zeros using the bilinear transformation algorithm.

Bunn, D. B.↗

Sufficient Statistics: an Example

The feature selection problem is considered resulting from the transformation x = Bz where B is a k by n matrix of rank k and k is or = to n. Such a transformation can be considered to reduce the dimension of each observation vector z, and in general, such a transformation results in a loss of information. In terms of the divergence, this information loss is expressed by the fact that the average divergence D sub B computed using variable x is less than or equal to the average divergence D computed using variable z. If D sub B = D, then B is said to be a sufficient statistic for the average divergence D. If B is a sufficient statistic for the average divergence, then it can be shown that the probability of misclassification computed using variable x (of dimension k is or = to n) is equal to the probability of misclassification computed using variable z. Also included is what is believed to be a new proof of the well known fact that D is or = to D sub B. Using the techniques necessary to prove the above fact, it is shown that the Brattacharyya distance as measured by variable x is less than or equal to the Brattacharyya distance as measured by variable z.

Quirein, J.↗

Sample data effects of high-pass filters

Four mathematical models of linear first and second order high pass washout filters were analyzed. These models were Euler's Integration, Zero-Order Hold, Bilinear Transformation, and Second-Order Adams-Bashforth Integration. Bode responses for each model at various sample rates were compared to the continuous filter response. Higher sample rates produced Bode responses approaching the continuous response and the Bilinear Transformation model produced the best responses over the frequency spectrum and sample rates. Pole location analysis of each model in the z-plane showed the Bilinear Transformation and Zero-Order Hold models gave stable poles regardless of time step size, whereas the other models did not display stable poles. A near constant gain error over the entire frequency spectrum was discovered in the Zero-Order Hold cases and a correction gain was calculated for the first-order high-pass filter case.

Chin, D. O.↗

A method for linearizing a nonlinear system with six state variables and three control variables

A nonlinear system governed by x = f(x,u) with six state variables and three control variables is considered in this project. A set of transformations from (x,u) - space to (z,v) - space is defined such that the linear tangent model is independent of the operating point in the z-space. Therefore, it is possible to design a control law satisfying all operating points in the transformed space. An algorithm to construct the above transformations and to obtain the associated linearized system is described in this report. This method is applied to a rigid body using pole placement for the control law. Results are verified by numerical simulation. Closed loop poles in x-space using traditional local linearization are compared with those pole placements in the z-space.

Hsia, W. S.↗

Documentation of program AFTBDY to generate coordinate system for 3D after body using body fitted curvilinear coordinates, part 1

The computer program AFTBDY generates a body fitted curvilinear coordinate system for a wedge curved after body. This wedge curved after body is being used in an experimental program. The coordinate system generated by AFTBDY is used to solve 3D compressible N.S. equations. The coordinate system in the physical plane is a cartesian x,y,z system, whereas, in the transformed plane a rectangular xi, eta, zeta system is used. The coordinate system generated is such that in the transformed plane coordinate spacing in the xi, eta, zeta direction is constant and equal to unity. The physical plane coordinate lines in the different regions are clustered heavily or sparsely depending on the regions where physical quantities to be solved for by the N.S. equations have high or low gradients. The coordinate distribution in the physical plane is such that x stays constant in eta and zeta direction, whereas, z stays constant in xi and eta direction. The desired distribution in x and z is input to the program. Consequently, only the y-coordinate is solved for by the program AFTBDY.

Kumar, D.↗