SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The mission of the Materials Protection Accounting and Control Technologies (MPACT) campaign is to support U.S. nuclear fuel cycle developers and operators to effectively and economically address domestic (and facilitate international) nuclear materials control and accounting (MC&A) requirements.
This is a joint INL-EPRI study. Link to corresponding page at the Electric Power Research Institute (EPRI): https://www.epri.com/research/products/000000003002028937 Recent Advanced Reactor (AR) designs typically offer features and attributes that depart from traditional water-cooled reactors in terms of fuel forms, coolants, structural materials, size, safety margins, and other important design and operational aspects. These departures, relative to the industry experience, will likely present a challenge for potential owner-operators when evaluating one or more AR designs for commercial deployment on a like-for-like basis. This is further exacerbated with new classes of reactors gaining prominence (e.g., microreactors) and new emerging applications (e.g., floating barge reactors or space propulsion reactors). The differences in design-specific technologies are compounded by the differences in approach to cost estimation. The lack of consistency in build up toward cost estimates creates a challenge when comparing competing concepts and evaluating their associated cost drivers. The outcome of a 2019 Scoping Study conducted by the Electric Power Research Institute (EPRI) indicated the need for a cost modeling guide (CMG), which would be underpinned by a technology-neutral and inclusive Generalized Nuclear Code of Accounts (GN-COA). A code of accounts (COA) is a tool by which costs are identified in even more specific categories, providing clarity on what specific costs are included in an estimate. A parallel independent effort was meanwhile taking place at Idaho National Laboratory via funding by the Systems Analysis Integration (SA&I) campaign of the Office of Nuclear Energy under the U.S. Department of Energy (U.S. DOE-NE) to also update the COA structure to enable more flexibility and encompass a wider variety of reactor technologies. After being made aware of these synergistic efforts, the two parties decided to combine efforts and develop a joint new standard format for nuclear cost estimation that builds on previous structures. This document describes the development of this joint GN-COA and provides guidance on the implementation of the tool, which is provided as the associated GN-COA Excel document. The main attributes of this novel COA format are that all items are functionally defined (in order to be technology and application agnostic) and grouped into logical arrangements that facilitate the tabulation of costs for reactor constructions under consideration. The intent is for the GN-COA to form a standard that is endorsed by future vendors and customers.
The purpose of this guide is intended to be a quick reference for a Project-Control Account Manager (P CAM) or technical manager empowered with a project’s cost, schedule, and technical responsibilities of a control account(s) when Earned Value Management (EVM) is required. The overall objective is to support the P CAM in performing their responsibilities as they relate to EVM. In addition, the reference guide describes at a summary level how the scope, schedule, and budget of a project integrate for optimal planning and control of prime contracts and in-house projects.
Food systems—encompassing activities in food production, land-use change, supply chains and waste management—contribute significantly to climate change. Recent estimates indicate that food systems produce over 30% of annual anthropogenic greenhouse gas (GHG) emissions (about 20% of CO 2 , 50% of CH 4 , and 75% of N 2 O), with the Intergovernmental Panel on Climate Change (IPCC) estimating a notably broad range of 23%–42% of global GHG emissions. This paper synthesizes current research on the contributions of food systems to climate change, highlights challenges in quantifying their impact and proposes a harmonized accounting framework for more effective climate action. We recommend that an expert committee aligned with the IPCC develop guidance for food systems emissions accounting in four key areas, including: (1) defining system boundaries and nomenclature; (2) developing protocols to allocate broader sectoral emissions to food systems; (3) prioritizing critical areas for research into activity data and emissions factors; and (4) developing a balanced framework for evaluating the impact of mitigation interventions in light of other food systems imperatives. The committee should be integrated into two key international policy processes—the United Nations Framework Convention on Climate Change and the United Nations Food Systems Summit—to support coordinated action towards global net-zero goals. Guidance from the committee could significantly improve the ability of governments, companies, and researchers to estimate, report, monitor and ultimately reduce the climate impacts of food systems.
Abstract A flat mask‐based model is almost universally used in macromolecular crystallography to account for disordered (bulk) solvent. This model assumes any voxel of the crystal unit cell that is not occupied by the atomic model is occupied by the solvent. The properties of this solvent are assumed to be exactly the same across the whole volume of the unit cell. While this is a reasonable approximation in practice, there are a number of scenarios where this model becomes suboptimal. In this work, we enumerate several of these scenarios and describe a new generalized approach to modeling the bulk‐solvent which we refer to as mosaic bulk‐solvent model. The mosaic bulk‐solvent model allows nonuniform features of the solvent in the crystal to be accounted for in a computationally efficient way. It is implemented in the computational crystallography toolbox and the Phenix software.
Defining a fuel's heating value (i.e., energy content) is fundamental for calculating engine efficiency and for life cycle analysis comparisons between different fuels. Traditional definitions of lower heating value and higher heating value account for the effect of water vapor versus liquid water in the exhaust, which is important when the fuel is used in a furnace or boiler. In an engine, it is equally important to properly account for the energy required to vaporize liquid fuel. Heat of vaporization has a small effect for common hydrocarbon fuels, typically less than 1% of lower heating value, but the effect is much larger for other important fuels such as ethanol (3.4% of lower heating value) and methanol (5.9% of lower heating value). This paper defines a new type of fuel heating value that more accurately reflects the useful fuel energy content for engines. Vaporized heating value is defined as the heating value when starting with a vaporized fuel instead of a liquid fuel. It can be calculated by adding the fuel's heat of vaporization to the traditional lower heating value. This paper illustrates the rationale and benefits of using vaporized heating value using data from the literature.
The Stefan problem is the classical model of a melting phase change. In heterogeneous systems, such phase changes can exhibit non-Fourier (anomalous) behaviors, where the advance of the melt interface does not follow the expected time scaling. These situations can be modeled by replacing the derivatives, in the governing partial differential equations, with fractional order derivatives. In particular, replacing the time derivatives leads to non-Fourier models that account for memory effects in the system. In this work, by using appropriate time convolution integrals, a general thermodynamic balance statement for melting phase problems, explicitly accounting for memory effects, is developed. From this balance, a general model formulation applicable to problems involving melting over a temperature range (i.e., a mushy region) is derived. A key component in this model is the representation of memory effects through the use of fractional derivative based constitutive models of the enthalpy and heat flux. Further, on shrinking the mushy region to a single isotherm, a general sharp interface melting model is obtained. Here, in contrast to the classic Stefan problem, the fractional derivatives induce a natural regularization, such that the constitutive models for enthalpy and heat flux are continuous at the melt interface; a result confirmed through numerical simulation. To further support the theoretical findings, a physical example of a non-Fourier Stefan problem is presented. Overall the development and results in this paper underscore the importance of explicitly relating the development of fractional calculus models to the appropriate thermodynamic balance statements.
The installed data storage capacity in the U.S. will reach 2.2 Zettabytes by 2025, generating about 50 million units of end-of-life (EOL) hard-disk drives (HDDs) per year. Due to data security concerns, most EOL HDDs are currently shredded (even when still functioning), representing an economic loss. Moreover, raw material extraction linked to the increased demand for storage causes environmental impacts. Besides mitigating the threat posed by sudden restrictions of raw materials, the circular economy (CE) offers to maximize value retention in the economy and reduce the environmental impacts of human activities. Common CE strategies are reusing and recycling products. However, the reuse of hard disk drives is currently burdened by the lack of trust HDD end-users have toward other non-physical means of data removal than shredding. Here, an agent-based modeling (ABM) approach is proposed to explore how techno-economic and social factors affect end-users' decisions to adopt EOL management practices other than shredding. The proposed method also accounts for data uncertainty by applying a semi-quantitative approach. Results demonstrate how increased green procurement and more robust standards could spur end-users' trust toward data-wiping technologies. Even when accounting for uncertainty, HDDs' reuse brings better environmental and economic benefits than HDD shredding followed by material recovery. The semi-quantitative approach proposed in this study could be more universally applied in future ABM, especially given the often-stochastic nature of such models. The developed ABM is also the first to represent several HDD industry stakeholders and demonstrate how the HDD shredding lock-in situation could be resolved.
Transforming building materials from net life-cycle CO 2 e emitters to carbon sinks is a key pathway towards decarbonizing the industrial sector. Current life-cycle assessments of materials (particularly “low-carbon” materials) often focus on cradle-to-gate emissions, which can exclude emissions and uptake (i.e., fluxes) later in the materials’ life-cycle. Further, conventional CO 2 e emission characterization disregards the dynamic effects of the timing of emissions and uptake on cumulative radiative forcing from processes like manufacturing, biomass growth, and the decadal carbon storage in long-lived building materials. This work presents a framework to analyze the cradle-to-grave CO 2 e balance of building materials using a time-dependent global warming potential calculation. We apply this framework in the dynamic accounting of carbon uptake in the built environment (D-CUBE) tool and examine two case studies: concrete and cross-laminated timber (CLT). When accounting for dynamic effects, the long storage time of biogenic carbon in CLT results in reduced warming, while the slow rate of uptake via concrete carbonation does not result in significant reductions in global warming. The D-CUBE tool allows for consistent comparisons across materials and emissions mitigation strategies at varying life-cycle stages and can be adapted to other materials or systems with different lifespans and applications. The flexibility of D-CUBE and the ability to identify CO 2 e emission hot-spot life-cycle stages will be instrumental in identifying pathways to achieving net-carbon-sequestering building materials.
Gibbs free energies of clusters are required for predictive modeling of cluster growth during condensation of a cooling vapor. Here, we present a straightforward method of calculating free energies of cluster formation using the data from molecular dynamics (MD) simulations. We apply this method to iron clusters having from 2 to 100 atoms. The energies obtained are verified by comparing to an MD-simulated equilibrium cluster size distribution in a sub-saturated vapor. We show that these free energies differ significantly from those obtained with a commonly used spherical cluster approximation, which relies on a surface tension coefficient of a flat surface, as it is used in the classical nucleation theory (CNT). We show that the spherical cluster approximation in CNT can be improved by using a cluster-size-dependent Tolman correction for the surface tension. The Tolman length and effective surface tension values were derived for iron clusters, and they significantly differ from the commonly used experimentally measured values. This improved approximation does not account for geometric magic number effects responsible for spikes and troughs in densities of neighbor cluster sizes. Nonetheless, it allows to more accurately model cluster formation from a cooling vapor. It better reproduces the condensation timeline, overall shape of the cluster size distribution, average cluster size, and the distribution width. In contrast, using a constant surface tension coefficient (as done in CNT) resulted in incorrect condensation dynamics and cluster size distributions. The analytical expression for cluster nucleation rate from CNT was updated to account for the size-dependence of cluster surface tension.
This article presents a case study motivated by a plot of data that suggested an emerging trend that the authors were faced with explaining. When the measurement error of the data is accounted for, it turns out there was no real trend. Furthermore, this article shows how to use a Bayesian modeling approach to account for the measurement error.
This report presents the initial development of a life prediction method that accounts for the variability of the material properties in Grade 91 steel. We account for material variability by both fitting a variable 3-parameter Weibull distribution to the rupture data of the material and by quantifying the effect that the creep deformation properties have on stresses via a Monte Carlo approach. To ensure a reasonable time frame when applying Monte Carlo to the creep stress, we propose a methodology that models the material as an extremely viscous Stokes flow with a non-Newtonian viscosity, therefore solving the problem in a single step. We use the final probabilistic model for structural failure developed in this document to evaluate a Flat Head Vessel designed with the Section III, Division 5 ASME Boiler Pressure and Vessel Code rules with a 100,000h design life and assess its probability of premature failure.
If a behind-the-meter solar photovoltaic (BTM PV) system is adopted, how does that influence the total amount of renewable electricity in its state in the long run (i.e., after the existence of the generator is reflected in the relevant utility's generation mix)? Would we expect the total amount of renewable generation to increase on a 1:1 basis with the BTM PV's generation? Or could it be something more, or something less? We show in this paper that the answer can depend on two key elements of how BTM PV is accounted for in a state’s renewable portfolio standard (RPS): (1) whether renewable energy certificates (RECs) from BTM PV can be used for RPS compliance, and (2) whether load served by generation from BTM PV counts as load covered by the RPS. These two elements combine into four possible accounting options, and we characterize the implications of each under the simplifying assumptions that the RPS is binding and the BTM PV RECs are used for compliance when allowed. For example, if load served by BTM PV generation counts toward the RPS load and BTM PV RECs cannot be used for compliance, the presence of BTM does not change the amount of RECs that the utility is required to retire, and yet additional RECs will be retired by the BTM PV owner - therefore, the total amount of renewable generation would increase on a 1:1 basis with the BTM PV generation. In contrast, under a common RPS design in which BTM PV RECs can be used for compliance and the load served by BTM PV generation is not covered by the RPS, the presence of BTM PV and transfer of RECs for compliance can actually decrease the total amount of renewable generation in the state, relative to a situation in which there is no BTM PV.
The Materials Protection Accounting and Control Technologies (MPACT) campaign supports the U.S. advanced fuel cycles technology developers to effectively and economically address nuclear MC&A (Material Control and Accounting) requirements.
This report discusses the work done under the US Department of Energy NE-5 Advanced Reactor Safeguards and Security Program during FY 2023. It provides a summary of material control and accounting (MC&A) for pebble bed reactors (PBRs) and addresses some of the main challenges with current PBR MC&A approaches that will inform safeguards and security by design efforts. The efforts to date have focused on tristructural isotropic (TRISO) pebble fuel material accounting and control including working with partners in industry, loss and production of nuclear material as part of reactor operations, burnup modeling and measurements, uncertainty quantifications for such modeling and measurements, statistical approaches needed, and measurement methods. The unique fuel management and utilization in a PBR, where the fuel in spherical form is introduced and circulates through the reactor, poses special challenges for MC&A. This contrasts with traditional water-cooled reactors in which the fuel is contained in large assemblies and can be easily identified and counted. Even online fueled reactors, such as the CANDU reactors (none of which operate in the United States), are significantly different because the fuel is still contained in relatively large assemblies, is uniquely identified, and the number of assemblies that pass through the core on an annual basis is much fewer than the hundreds of thousands that circulate in a PBR, none of which are uniquely identified. Additionally, the nature of the TRISO fuel results in very low heavy metal loading with each pebble containing less than 10 g of uranium and on the order of less than 1 g of fissile material. This low fuel density and the robustness of the TRISO particles are major features of the TRISO fuel from a safety basis as each TRISO particle and pebble acts as a containment for the nuclear material and fission products during normal and accident conditions. This also results in very low plutonium loading per pebble during normal operations, which is on the order of 0.1 g at full burnup. A major feature of PBRs is that they will allow for significantly higher burnup, on the order of 160 GWd/THM compared to the burnup of traditional LWRs, which is on the order of 45 GWd/THM. This is achieved by monitoring the pebbles as they circulate through the reactor and allowing them to be reintroduced into the core until the desired burnup is achieved and they are removed from the reactor and enter the spent fuel storage areas.
The US Nuclear Regulatory Commission (NRC) will likely require license applicants for liquid-fueled molten salt reactors (MSRs) with circulating fuel to submit a nuclear material control and accounting (MC&A) plan or detailed MC&A program description for the facility. In liquid-fueled MSRs with special nuclear material (SNM) in bulk (i.e., not in discrete items) form and rapidly changing quantities due to fuel transmutation and depletion, using traditional nuclear material accounting methods with material balance evaluations is challenging. In reactors with changing inventories, these expected quantities of SNM must be calculated based on operational parameters. Reducing uncertainties on these expected quantities is challenging in the case of MSRs without decades of operational experience to verify and validate predictive computational codes. Moreover, many areas in MSRs are inaccessible because of high-temperature and high-radiation environments, making measurements challenging.
This report covers the application of the TRi-structural ISOtropic (TRISO) fuel fabrication facility material control & accounting (MC&A) modeling capability developed by Sandia National Laboratories (SNL) under the U.S. Department of Energy (DOE) Materials Protection, Accounting, and Control Technologies (MPACT) program to support the development of MC&A approaches for the Low Enriched Fuel Fabrication Facility (LEFFF) at Los Alamos National Laboratory (LANL).
The automated attendance accounting system (AAAS) was developed under the auspices of the Space Technology Applications Program. The task is basically the adaptation of a small digital computer, coupled with specially developed pushbutton terminals located in school classrooms and offices for the purpose of taking daily attendance, maintaining complete attendance records, and producing partial and summary reports. Especially developed for high schools, the system is intended to relieve both teachers and office personnel from the time-consuming and dreary task of recording and analyzing the myriad classroom attendance data collected throughout the semester. In addition, since many school district budgets are related to student attendance, the increase in accounting accuracy is expected to augment district income. A major component of this system is the real-time AAAS software system, which is described.