Search NASA⌕ Search

SEARCH · Search NASA

Results for “active processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Digital active material processing platform effort (DAMPER), SBIR phase 2

Applied Technology Associates, Inc., (ATA) has demonstrated that inertial actuation can be employed effectively in digital, active vibration isolation systems. Inertial actuation involves the use of momentum exchange to produce corrective forces which act directly on the payload being actively isolated. In a typical active vibration isolation system, accelerometers are used to measure the inertial motion of the payload. The signals from the accelerometers are then used to calculate the corrective forces required to counteract, or 'cancel out' the payload motion. Active vibration isolation is common technology, but the use of inertial actuation in such systems is novel, and is the focus of the DAMPER project. A May 1991 report was completed which documented the successful demonstration of inertial actuation, employed in the control of vibration in a single axis. In the 1 degree-of-freedom (1DOF) experiment a set of air bearing rails was used to suspend the payload, simulating a microgravity environment in a single horizontal axis. Digital Signal Processor (DSP) technology was used to calculate in real time, the control law between the accelerometer signals and the inertial actuators. The data obtained from this experiment verified that as much as 20 dB of rejection could be realized by this type of system. A discussion is included of recent tests performed in which vibrations were actively controlled in three axes simultaneously. In the three degree-of-freedom (3DOF) system, the air bearings were designed in such a way that the payload is free to rotate about the azimuth axis, as well as translate in the two horizontal directions. The actuator developed for the DAMPER project has applications beyond payload isolation, including structural damping and source vibration isolation. This report includes a brief discussion of these applications, as well as a commercialization plan for the actuator.

Blackburn, John↗
DOE OSTI2020

Evaluation of Material Balance Approaches for Hanford Direct-Feed Low Activity Waste Processing - 20022

The Hanford Site has accumulated millions of gallons of tank waste from reprocessing spent fuel to recover plutonium, uranium, cesium, and strontium. The supernatant from the accumulated tank waste will be treated using a Direct Feed Low-Activity Waste approach. The supernatant will be treated to remove solids and cesium in the Tank-Side Cesium Removal process in the Hanford tank farm, then vitrified in a semi-batch process in the Hanford Waste Treatment and Immobilization Plant (WTP). Currently, each batch of feed is sampled at three locations prior to being fed to the melter: the feed qualification tank in the Hanford tank farm as well as the concentrate receipt vessel (CRV) and melter feed preparation vessel (MFPV) in the WTP. The feed qualification sample is taken from a large batch of accumulated feed, only two to three samples are expected each year. Approximately 275 samples from the CRVs and 1100 samples from the MFPV are expected each year. An evaluation was performed to determine if a material balance based on the feed qualification sample could replace most of the sampling in the CRVs and MFPVs. The evaluation consisted of three elements: (1) determination of the practicality of using a material balance to estimate the stream composition of the CRV and MFPV contents, (2) evaluation of whether the material balance could be automated using the existing process control system, and (3) determination of the uncertainty in glass composition using the material balance approach. It is assumed that periodic sampling at the CRV and MFPV would be performed periodically to re-baseline the material balance, evaluations are in progress to determine the frequency of this periodic sampling. Process sample locations downstream of the melter were reviewed as well, but the partitioning of semi-volatile species in the melter was determined to preclude extending the material balance approach past the melter. It was determined that replacement of the CRV sample location was feasible and did not increase process uncertainty or significantly impact waste loading. Replacement of the MFPV sample was also determined to be feasible, but that measurement of the glass former chemical addition may be needed prior to addition of these chemicals to the MFPV. This measurement could be performed by an in situ laser-induced breakdown spectroscopy (LIBS) system. Limited tests were performed to evaluate LIBS for direct measurements of the low-activity waste melter feed. The use of a material balance would eliminate over 1200 samples each year if only 10% of the CRV and MFPV batches are sampled and could likely allow the WTP laboratory to operate on days only versus 24/7 operation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Investigation of the cesium activation of Ga⁢N photocathodes by low-energy electron microscopy

Low-energy electron microscopy (LEEM) was performed on p-Ga⁢N samples during in situ cesium deposition. LEEM images of electron reflectivity recorded as a function of the incident electron energy at different Cs coverages allowed to spatially resolve the evolution of the local work function (WF) during the activation process. While the average WF drops by more than 3 eV, the local WF remains quite uniform across the surface throughout the activation process. Maximum fluctuations of less than 0.2 eV were observed in the WF maps for Cs coverage of a fraction of a monolayer. These fluctuations are mainly related to the surface topography, in particular, to the atomic steps’ structure, which replicates the substrate miscut. Apart from these weak spatial fluctuations, no Cs clusters that would induce strong local WF contrast were observed at the scale of the 20-nm resolution of the measurements. These observations agree with the simple model of semiconductor activation to negative electron affinity that describes the formation of a dipole layer as responsible for the lowering of the WF. Additionally, at complete Cs coverage, the WF becomes fully homogeneous over the surface, smoothing out features originating from defects and topography.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Fully Transparent GaN Homojunction Tunnel Junction-Enabled Cascaded Blue LEDs.

A sidewall activation process was optimized for buried magnesium-doped p-GaN layers yielding a significant reduction in tunnel junction-enabled light emitting diode (LED) forward voltage. This buried activation enabled the realization of cascaded blue LEDs with fully transparent GaN homojunction tunnel junctions. The initial optimization of buried p-GaN activation was performed on PN junctions grown by metal organic chemical vapor deposition (MOCVD) buried under hybrid tunnel junctions grown by MOCVD and molecular beam epitaxy. Next the activation process was implemented in cascaded blue LEDs emitting at 450 nm, which were enabled by fully transparent GaN homojunction tunnel junctions. The tunnel junction-enabled multi-active region blue LEDs were grown monolithically by MOCVD. This work demonstrates a state-of-the-art tunnel junction-enabled cascaded LED utilizing homojunction tunnel junctions which do not contain any heterojunction interface.

42 ENGINEERING↗
NASA NTRS1971

Electroplating on titanium alloy

Activation process forms adherent electrodeposits of copper, nickel, and chromium on titanium alloy. Good adhesion of electroplated deposits is obtained by using acetic-hydrofluoric acid anodic activation process.

Lowery, J. R.↗
NASA NTRS1995

Transient Structure Current Generated by the Activation of a Squib Device

Experimental measurements of the currents in pyro-activation circuits show that a structure current is generated during the pyro-activation process. This current is a transient current and is an intense source of electromagnetic interference. Analysis has indicated that the noise voltage induced on candidate victim circuits is sufficient to cause circuit upset and/or latchup. A survey of flight anomaly records has also correlated the occurrence of anomalies with the pyro-activation process. Detailed analyses, taking the spacecraft cabling configuration and circuit sensitivities into account, have shown that the structure current induced noise voltage could definitely be the cause of the anomalies. The threat of the structure current due to pyro-activation can be alleviated by isolating the pyro-activation circuit from ground and by proper arrangement of the cables in sensitive circuits.

pyrotechnic↗
DOE OSTI2024

The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices

Thin film CdTe-based photovoltaic devices have achieved high efficiency above 22 %. The recent improvement in efficiency is due to Se alloying in the CdTe absorbers to form a CdSeTe/CdTe structure. The subsequent band gap grading increases the short circuit current density. The Se can be introduced by depositing a precursor thin film of either CdSe or a CdSeTe alloy and then diffusing the Se into the CdTe during the high temperature cadmium chloride activation process. Using CdSe is preferred because it is easier to control the Se concentration. However, during fabrication of the CdSeTe/CdTe devices, the CdSe thickness needs to be precisely controlled to prevent the retention of a CdSe remnant layer after the activation treatment. Retention of a remnant CdSe layer causes a dramatic reduction in device efficiency. In this work, we show that the reduction in efficiency is caused by a number of factors. The remnant CdSe layer is n-type which moves the position of the p-n junction. Also, it is widely thought that the CdSe remnants are photo-inactive. In this work, we clarify that the individual CdSe grains are actually highly photo-active. However, the grain sizes in the CdSe remnant and the adjacent CdSeTe layer are very small resulting in a high grain boundary area. Although the grain boundaries are passivated with chlorine, cathodoluminescence imaging and electrical measurements show that this is only partially effective. Also, EQE measurements show that the remnant CdSe causes parasitic absorption. Overall, the remnant CdSe layer causes a reduction in short circuit current density and device efficiency. The thickness of the CdSe precursor layer and the cadmium chloride activation process conditions must be precisely optimised to ensure that all the CdSe is consumed and inter-diffused to form the CdSeTe alloy for highest efficiency devices.

CdSe remnant↗
DOE OSTI2022

A classical equation that accounts for observations of non-Arrhenius and cryogenic grain boundary migration

Observations of microstructural coarsening at cryogenic temperatures, as well as numerous simulations of grain boundary motion that show faster migration at low temperature than at high temperature, have been troubling because they do not follow the expected Arrhenius behavior. This work demonstrates that classical equations, that are not simplified, account for all these oddities and demonstrate that non-Arrhenius behavior can emerge from thermally activated processes. According to this classical model, this occurs when the intrinsic barrier energies of the processes become small, allowing activation at cryogenic temperatures. Additional thermal energy then allows the low energy process to proceed in reverse, so increasing temperature only serves to frustrate the forward motion. This classical form is shown to reconcile and describe a variety of diverse grain boundary migration observations.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Content of total iron, copper and manganese in liver of animals during hypokinesia, muscle activity and process of recovery

It is shown that the content of total iron, copper and manganese in the liver of animals is altered depending on the intensity and duration of their swimming. Hypodynamia for 7 days does not alter the concentration of iron, but sufficiently increases the content of copper and manganese. The barometric factor effectively influences the maintenance of constancy in the content of microelements accumulated in the liver after intensive muscle activity.

Potapovich, G. M.↗
DOE OSTI2023

Intermediate-state-trapped mutants pinpoint G protein-coupled receptor conformational allostery

Understanding the roles of intermediate states in signaling is pivotal to unraveling the activation processes of G protein-coupled receptors (GPCRs). However, the field is still struggling to define these conformational states with sufficient resolution to study their individual functions. Here, we demonstrate the feasibility of enriching the populations of discrete states via conformation-biased mutants. These mutants adopt distinct distributions among five states that lie along the activation pathway of adenosine A 2A receptor (A 2A R), a class A GPCR. Our study reveals a structurally conserved cation-π lock between transmembrane helix VI (TM6) and Helix8 that regulates cytoplasmic cavity opening as a “gatekeeper” for G protein penetration. A GPCR activation process based on the well-discerned conformational states is thus proposed, allosterically micro-modulated by the cation-π lock and a previously well-defined ionic interaction between TM3 and TM6. Intermediate-state-trapped mutants will also provide useful information in relation to receptor-G protein signal transduction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Stress-dependent activation entropy in thermally activated cross-slip of dislocations

Cross-slip of screw dislocations in crystalline solids is a stress-driven thermally activated process essential to many phenomena during plastic deformation, including dislocation pattern formation, strain hardening, and dynamic recovery. Molecular dynamics (MD) simulation has played an important role in determining the microscopic mechanisms of cross-slip. However, due to its limited timescale, MD can only predict cross-slip rates in high-stress or high-temperature conditions. The transition state theory can predict the cross-slip rate over a broad range of stress and temperature conditions, but its predictions have been found to be several orders of magnitude too low in comparison to MD results. This discrepancy can be expressed as an anomalously large activation entropy whose physical origin remains unclear. Here, we resolve this discrepancy by showing that the large activation entropy results from anharmonic effects, including thermal softening, thermal expansion, and soft vibrational modes of the dislocation. We expect these anharmonic effects to be significant in a wide range of stress-driven thermally activated processes in solids.

Science & Technology - Other Topics↗
DOE OSTI2021

Enhanced Guest@MOF Interaction via Stepwise Thermal Annealing: TCNQ@Cu 3 (BTC) 2

Confinement of guest molecules in porous materials such as metal organic frameworks (MOFs) promises to deliver emergent properties separate from those of the individual components. Understanding the confinement mechanism is therefore important for the development of new synthesis routes that adjust MOF properties for specific applications. In this work, we developed a new synthetic method to confine guest molecules into MOF pores through a stepwise thermal annealing process, wherein the confinement of 7,7,8,8-tetracyanoquinodimethane (TCNQ) guest molecules into Cu 3 (BTC) 2 (BTC = benzene-1,3,5-tricarboxylic acid) MOF host is used as an example of how novel materials can be created with new physical properties. The stepwise thermal annealing process includes 1) an activation process of pristine Cu 3 (BTC) 2 MOF to maximizes the TCNQ guest loading in the MOF host by effectively removing the residual solvents and 2) post-annealing of the TCNQ infiltrated MOF to enhances the interaction of the confined guest molecules with the MOF host. Obtained experimental results based on thermogravimetric analysis, N 2 gas adsorption, electron microscopy, X-ray diffraction and infrared absorption, combined with density functional theory calculations provide evidence that the use of a stepwise thermal annealing process yields enhancements in the guest loading, packing and interaction between the TCNQ guest and the MOF host. The new hybrid TCNQ@Cu 3 (BTC) 2 system is stable and shows no significant signs of structural degradation even after submersion in water. This is due to the presence of significantly stronger interactions of TCNQ with the frame-work metal ions compared to those of the water molecules competing for the same framework binding sites. It was also found that TCNQ@Cu 3 (BTC) 2 system maintains a significant CO 2 and CH 4 adsorption potential compared to the pristine MOF. The synthetic route developed in this work yields novel guest@MOF hybrid systems that will be useful for many MOF-based applications such as gas separations and chemical sensors performed under humid conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Argonne-Northwestern Solar Energy Research Center (08/01/2009-07/31/2018) and renamed Center for Light Energy Activated Redox Processes (LEAP) (Final Report)

In 2009-2014 the ANSER Center focused on understanding how molecules, materials, and systems can use sunlight to generate charges that drive catalysts for solar fuels formation and directly power photovoltaic cells. We addressed a common set of fundamental questions that must be answered in both contexts to successfully utilize sunlight as a renewable energy source for fuels and electricity. By attacking the common questions intrinsic to solar fuels and electricity in the same research center, ANSER provided opportunities for cross-cutting solutions not possible by addressing only fuels or electricity alone.

14 SOLAR ENERGY↗
NASA NTRS1989

The radiative signature of the shock acceleration process in active galactic nuclei

A time-dependent model in which plasma enters a shock region and undergoes first-order Fermi acceleration is considered. The time evolution of the particle distribution and the associated synchrotron emission has been calculated for an energy-dependent diffusion coefficient. When the emitting region is not spatially resolved, the spectrum is a power law with an exponential turnover in frequency. With increasing time, the power law and the turnover extend to higher frequencies. To test the model, observations at three or more frequencies should be made of time-resolved flux increases from the optically thin nonthermal emission region in variable active galactic nuclei. Existing data that can be used to test the model are scarce but offer qualitative support.

Bregman, Joel N.↗