Search NASA⌕ Search

SEARCH · Search NASA

Results for “aerosol capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Aerodynamic design of gas and aerosol samplers for aircraft

The aerodynamic design of airborne probes for the capture of air and aerosols is discussed. Emphasis is placed on the key parameters that affect proper sampling, such as inlet-lip design, internal duct components for low pressure drop, and exhaust geometry. Inlet designs that avoid sonic flow conditions on the lip and flow separation in the duct are shown. Cross-stream velocities of aerosols are expressed in terms of droplet density and diameter. Flow curvature, which can cause aerosols to cross streamlines and impact on probe walls, can be minimized by means of a proper inlet shape and proper probe orientation, and by avoiding bends upstream of the test section. A NASA panel code called PMARC was used successfully to compute streamlines around aircraft and probes, as well as to compute to local velocity and pressure distributions in inlets. A NACA 1-series inlet with modified lip radius was used for the airborne capture of stratospheric chlorine monoxide at high altitude and high flight speed. The device has a two-stage inlet that decelerates the inflow with little disturbance to the flow through the test section. Diffuser design, exhaust hood design, valve loss, and corner vane geometry are discussed.

Soderman, Paul T.↗
NASA NTRS1992

Atmospheric concentrations of submicron contact-freezing nuclei

Atmospheric concentrations of contact-freezing nuclei were measured using a technique primarily sensitive to submicron aerosol particles. Diffusion and phoretic forces were relied on for the capture of nuclei by supercooled drops of distilled water exposed to the sample air. Nucleus concentrations were deduced from the rate at which the drops were observed to freeze, interpreting that rate on the basis of a theoretical prediction of aerosol capture rate for different assumed sizes of the nuclei. Measurements at Laramie, Wyoming, yielded average concentrations of contact-freezing nuclei of 1.7/L at -15 C and 3.1/L at -18 C for an assumed radius of 0.01 micron for the nucleating particles.

Deshler, Terry↗
NASA NTRSDate not supplied

Lidar Simulations of Backscatter and Extinction Uncertainty Estimates for ACCP Assessments

As part of the NASA Aerosols and Clouds, Convection, and Precipitation (ACCP) pre-formulation study, several lidar instruments are being assessed for their capabilities in advancing the science objectives enumerated in the most recent Earth Sciences Decadal Survey. These assessments are conducted using the NASA Langley Research Center(LaRC) lidar simulator, which produces profiles of backscatter and extinction uncertainty estimates for a given set of input parameters. Specifically, attention is focused onevaluating the science benefits and improvements of a candidate two-wavelength space-based High Spectral Resolution Lidar (HSRL) compared to an elastic backscatter lidar with similar capabilities to the Cloud-Aerosol Lidar with Orthogonal Polarization(CALIOP), flying aboard the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. In this talk, simulations of satellite-based HSRL and those of a CALIOP-like system are compared for different atmospheric scenes that capture varying total aerosol loadings, aerosol vertical distributions, and aerosol types.The results of these analyses are presented as functions of averaging resolution(horizontal/vertical), lighting conditions (daytime/nighttime), surface type (land/ocean),and wavelength (532 nm/1064 nm). Also, simulations of multiple aerosol layers and of aerosols beneath transparent cirrus clouds are shown to demonstrate the consequent impacts on underlying backscatter and extinction uncertainties, and to better differentiate the performance of HSRL compared to that of CALIOP for real-world atmospheric scenarios.

Travis D. Toth↗
DOE OSTI2022

Evaluating the Influence of CAM5 Aerosol Configuration on Simulated Tropical Cyclones in the North Atlantic

This study examines the influence of prescribed and prognostic aerosol model configurations on the formation of tropical cyclones (TCs) in the North Atlantic Ocean in Community Atmosphere Model version 5 (CAM5). The impact of aerosol parameterization is examined by investigating storm track density, genesis density, potential intensity, and genesis potential index. This work shows that both CAM5 configurations simulate reduced storm frequency when compared to observations and that differences in TC climatology between the model configurations can be explained by differences in the large-scale environment. The analysis shows that simulation with the prognostic aerosol parameterization scheme reasonably captures the observed interannual variability in tropical cyclones and aerosols (i.e., dust) in the North Atlantic, while simulation with the prescribed configuration (climatology) is less favorable. The correlation between dust and TCs in observations (i.e., reanalysis and satellite datasets) is shown to be negative, and this relationship was also found for the prognostic aerosol configuration despite an overall decrease in the frequency of TCs. This indicates that, to accurately replicate certain aspects of TC interannual variability, the aerosol configuration within CAM5 needs to account for the appropriate dust variability.

Huff, J. Jacob A. (ORCID:0000000329143817)↗
DOE OSTI2024

Aitken Mode Aerosols Buffer Decoupled Mid‐Latitude Boundary Layer Clouds Against Precipitation Depletion

Aerosol-cloud-precipitation interactions are a leading source of uncertainty in estimating climate sensitivity. Remote marine boundary layers where accumulation mode (~100–400 nm diameter) aerosol concentrations are relatively low are very susceptible to aerosol changes. These regions also experience heightened Aitken mode aerosol (~10–100 nm) concentrations associated with ocean biology. Aitken aerosols may significantly influence cloud properties and evolution by replenishing cloud condensation nuclei and droplet number lost through precipitation (i.e., Aitken buffering). We use a large-eddy simulation with an Aitken-mode enabled microphysics scheme to examine the role of Aitken buffering in a mid-latitude decoupled boundary layer cloud regime observed on 15 July 2017 during the Aerosol and Cloud Experiments in the Eastern North Atlantic flight campaign: cumulus rising into stratocumulus under elevated Aitken concentrations (~100–200 mg -1 ). In situ measurements are used to constrain and evaluate this case study. Our simulation accurately captures observed aerosol-cloud-precipitation interactions and reveals time-evolving processes driving regime development and evolution. Aitken activation into the accumulation mode in the cumulus layer provides a reservoir for turbulence and convection to carry accumulation aerosols into the drizzling stratocumulus layer above. Further Aitken activation occurs aloft in the stratocumulus layer. Together, these activation events buffer this cloud regime against precipitation removal, reducing cloud break-up and associated increases in heterogeneity. We examine cloud evolution sensitivity to initial aerosol conditions. With halved accumulation number, Aitken aerosols restore accumulation concentrations, maintain droplet number similar to original values, and prevent cloud break-up. Without Aitken aerosols, precipitation-driven cloud break-up occurs rapidly. In this regime, Aitken buffering sustains brighter, more homogeneous clouds for longer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Aerosol emissions from water-lean solvents for post-combustion CO 2 capture

Advanced water-lean solvents (WLS) for post-combustion CO 2 capture have been gaining interest due to their ability to reduce the parasitic penalty from energy needed for solvent regeneration. Commercial implementation of these novel CO 2 capture technologies hinges on successful control of amine emissions. RTI conducted a parametric study of fundamental and operational variables influence on overall amine aerosol and vapor emissions from our water-lean solvent eCO 2 Sol™ using our 6-kW equivalent bench-scale gas absorption system. The parametric testing used a simulated flue gas with 15 % CO 2 , 2.3–4.2 % H 2 O, and 0–6 ppm sulfite (SO 3 ) to examine the impact of the presence of aerosols to the capture performance and amine emissions from the system. The SO 3 reacts with water in the flue gas to create H 2 SO 4 , which forms liquid aerosol droplets and provide nucleation sites for growth of aerosols. Scanning Mobility Particle Sizer and Aerodynamic Particle Sizer instruments monitored the aerosol particle size distribution. Parametric testing results suggested that the presence of the aerosols in the flue gas could increase the overall amine emissions by 10X compared to the baseline emissions from WLS’s vapor pressure. Principal component analysis (PCA) and projection to latent squares (PLS) developed models to predict the aerosol-based amine emissions from process data. The predictive PLS model had a correlation coefficient (Q 2 ) of 0.92 and could predict the aerosol-based emissions from the NAS process with ±15 % accuracy (average absolute deviation, AAD). The PLS regression model also identified key variables affecting aerosol-based emissions from WLS.

42 ENGINEERING↗
DOE OSTI2025

Signatures of aerosol-cloud interactions in GiOcean: a coupled global reanalysis with two-moment cloud microphysics

Aerosols influence the Earth's radiative balance through direct interactions with radiation and by affecting cloud properties. Anthropogenic aerosols have led to cooling during the industrial era through aerosol–cloud interactions (ACI), including aerosol effects on cloud microphysical properties and the subsequent adjustments. However, large uncertainties remain in Earth system models (ESMs) regarding the magnitude of this cooling. In part, ESMs substantially disagree on cloud properties, thermodynamics, the hydrological cycle, and general circulation. Reanalysis provides a useful avenue for exploring the impact of ACI on clouds and radiation because its atmosphere is forced to match realistic conditions through the assimilation of observations. Here, we explore the impact of ACI on clouds in the GiOcean reanalysis – the first to incorporate aerosol-cloud interactions. We contrast variables important for ACI between GiOcean and satellite observations and develop 2-dimensional lookup tables of ACI for both using a source-sink budget perspective to attribute the changes in cloud droplet number (Nd) and liquid water path (LWP) to aerosol and meteorology. A compositing analysis using lookup tables shows that GiOcean captures key aspects of aerosol–cloud–precipitation interactions, including (1) activation of aerosol into cloud droplets, (2) effective precipitation scavenging of Nd, (3) suppression of precipitation by high Nd in regions with heavy aerosol emissions. In contrast, satellite observations do not exhibit clear patterns for processes (2) and (3). Random Forest analysis shows that interannual variability in Nd and LWP over the Northern Hemisphere ocean in GiOcean is primarily driven by precipitation, consistent with satellite observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Regime-based aerosol–cloud interactions from CALIPSO-MODIS and the Energy Exascale Earth System Model version 2 (E3SMv2) over the Eastern North Atlantic

This study investigates aerosol-cloud interactions in marine boundary layer (MBL) clouds using an advanced deep-learning-driven synoptic-regime-based framework, combining satellite data (CALIPSO vertically resolved aerosol extinction and MODIS cloud properties) with 1° nudged Energy Exascale Earth System Model version 2 (E3SMv2) simulation over the Eastern North Atlantic (ENA; ∼10°×10°, 2006–2014). The E3SMv2 captures observed seasonal variations in cloud droplet number concentrations (N d ) and liquid water path (LWP), though it systematically underestimates N d . We then partition ENA meteorology into four synoptic regimes (Pre-Trough, Post-Trough, Ridge, Trough) via a deep-learning clustering of ERA5 reanalysis fields, enabling regime-dependent aerosol-cloud interactions analyses. Both satellite and E3SMv2 exhibit an inverted-V LWP-N d relationship. In Post-Trough and Ridge regimes, the satellite shows stronger negative LWP-N d sensitivities than in Pre-Trough regime. The Trough regime displays a muted satellite LWP response. In comparison, the model predicts more exaggerated LWP responses across regimes, with LWP increasing too quickly at low N d and decreasing more sharply at high N d , especially in Pre-Trough and Trough regimes. These exaggerated model LWP sensitivities may stem from uncertainties in representing drizzle processes, entrainment, and turbulent mixing. As for N d susceptibility to aerosols, N d increases with MBL aerosol extinction in both datasets, but the simulated aerosol-cloud interactions appear oversensitive to meteorological conditions. Overall, E3SMv2 better captures aerosol effects under regimes that favor stratiform clouds (Post-Trough, Ridge), but performance deteriorates for regimes with deeper, dynamically complex clouds (Trough), highlighting the need for improved representations of those cloud processes in climate models.

Environmental sciences↗
NASA NTRSDate not supplied

Distribution and Sources of Tropospheric Aerosols Over the Western North Atlantic During ACTIVATE (February-March 2020)

The Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE) is a five-year (2019-2023) NASA Earth-Venture Suborbital-3 (EVS-3) mission to robustly characterize aerosol-cloud-meteorology interactions during February-June, with a focus on marine boundary layer clouds. This characterization requires understanding of aerosol composition, distribution, transport pathways, and sources. Here we use the GEOS-Chem chemical transport model driven by the MERRA-2 reanalysis to simulate tropospheric carbon monoxide (CO) and aerosols over the western North Atlantic Ocean (WNAO) during the first field deployment of ACTIVATE (February-March 2020). CO is used as a tracer to diagnose transport pathways for continental pollution outflow to the WNAO. The aerosol simulation represents all major aerosols including sulfate-nitrate-ammonium (SNA), mineral dust, sea salt, black and organic carbon aerosols. Model-simulated mixing ratios of SNA and organic carbon are compared with aircraft observations. We show that intensive aerosol mass measurements in the lower troposphere over the North American outflow region during ACTIVATE provide strong constraints on model aerosol wet scavenging. Comparisons of model aerosol extinctions with the airborne High Spectral Resolution Lidar-2 (HSRL-2) measurements indicate that the model generally captures continental outflow of aerosols and enhanced extinctions associated with sea salt. Simulated aerosol optical depths (AODs) and extinction vertical profiles are also compared with satellite retrievals from MODIS/Aqua and CALIOP/CALIPSO, respectively. CALIOP sometimes observes enhanced aerosol extinction at altitudes between ~1.5km and ~2.0km south of 32°N. The model reproduces this enhancement and attributes it to coarse-mode sea salt associated with high relative humidity. The relative contributions of continental and oceanic sources to the aerosol loading, AOD, and their distributions over the study domain will also be discussed.

aerosols↗
NASA NTRS2014

Application of Spectral Analysis Techniques in the Intercomparison of Aerosol Data: Part III. Using Combined PCA to Compare Spatiotemporal Variability of MODIS, MISR and OMI Aerosol Optical Depth

Satellite measurements of global aerosol properties are very useful in constraining aerosol parameterization in climate models. The reliability of different data sets in representing global and regional aerosol variability becomes an essential question. In this study, we present the results of a comparison using combined principal component analysis (CPCA), applied to monthly mean, mapped (Level 3) aerosol optical depth (AOD) product from Moderate Resolution Imaging Spectroradiometer (MODIS), Multiangle Imaging Spectroradiometer (MISR), and Ozone Monitoring Instrument (OMI). This technique effectively finds the common space-time variability in the multiple data sets by decomposing the combined AOD field. The results suggest that all of the sensors capture the globally important aerosol regimes, including dust, biomass burning, pollution, and mixed aerosol types. Nonetheless, differences are also noted. Specifically, compared with MISR and OMI, MODIS variability is significantly higher over South America, India, and the Sahel. MODIS deep blue AOD has a lower seasonal variability in North Africa, accompanied by a decreasing trend that is not found in either MISR or OMI AOD data. The narrow swath of MISR results in an underestimation of dust variability over the Taklamakan Desert. The MISR AOD data also exhibit overall lower variability in South America and the Sahel. OMI does not capture the Russian wild fire in 2010 nor the phase shift in biomass burning over East South America compared to Central South America, likely due to cloud contamination and the OMI row anomaly. OMI also indicates a much stronger (boreal) winter peak in South Africa compared with MODIS and MISR.

satellite observation↗
NASA NTRS2010

Detecting Thin Cirrus in Multiangle Imaging Spectroradiometer Aerosol Retrievals

Thin cirrus clouds (optical depth (OD) < 03) are often undetected by standard cloud masking in satellite aerosol retrieval algorithms. However, the Mu]tiangle Imaging Spectroradiometer (MISR) aerosol retrieval has the potential to discriminate between the scattering phase functions of cirrus and aerosols, thus separating these components. Theoretical tests show that MISR is sensitive to cirrus OD within Max{0.05 1 20%l, similar to MISR's sensitivity to aerosol OD, and MISR can distinguish between small and large crystals, even at low latitudes, where the range of scattering angles observed by MISR is smallest. Including just two cirrus components in the aerosol retrieval algorithm would capture typical MISR sensitivity to the natural range of cinus properties; in situations where cirrus is present but the retrieval comparison space lacks these components, the retrieval tends to underestimate OD. Generally, MISR can also distinguish between cirrus and common aerosol types when the proper cirrus and aerosol optical models are included in the retrieval comparison space and total column OD is >-0.2. However, in some cases, especially at low latitudes, cirrus can be mistaken for some combinations of dust and large nonabsorbing spherical aerosols, raising a caution about retrievals in dusty marine regions when cirrus is present. Comparisons of MISR with lidar and Aerosol Robotic Network show good agreement in a majority of the cases, but situations where cirrus clouds have optical depths >0.15 and are horizontally inhomogeneous on spatial scales shorter than 50 km pose difficulties for cirrus retrieval using the MISR standard aerosol algorithm..

Pierce, Jeffrey R.↗
NASA NTRS2023

Mobile Observations of Ozone and Aerosols in Alabama: Southeastern US Summer Pollution and Coastal Variability

We present a detailed analysis of measurements of ozone (O 3 ) and aerosols collected using multiple platforms and instruments during a 5-day mini-campaign in Alabama, for improving our understanding of the chemistry and air quality in the Southeastern United States. Our study features the first on-road O 3 lidar profiling on highways and the coordinated airborne observations that captured O 3 and aerosol structures associated with synoptic weather conditions, stratospheric intrusions, wildfire smoke transport, and enhancements in urban areas. The Doppler wind lidar data suggest that the vertical structures and variability of O 3 and aerosols at Dauphin Island, a coastal site in the Gulf of Mexico, were related to both the synoptic flow and local-scale land-sea breeze circulation. The onshore gulf breeze, which typically started in the afternoon, helped to quickly dilute air pollutants near the surface, resulting in large gradients toward inland areas. In contrast, gradients were much smaller on days without a gulf breeze. O 3 and humidity were highly anti-correlated in the lower free troposphere, but weakly anti-correlated in the planetary boundary layer (PBL) suggesting more complicated emissions and sink of O 3 in the PBL. Our on-road and airborne measurement strategies to quantify the vertical and horizontal chemical gradients will be useful for future geostationary satellite validation.

Shi Kuang↗
DOE OSTI2026

Investigating ultrafine aerosol turbulent fluxes during atmospheric new particle formation events

New particle formation (NPF) is an important source of atmospheric aerosols, yet quantitatively predicting its occurrence remains challenging, partly because ground-based measurements cannot capture NPF accurately if they occur in the upper atmosphere. While observations have confirmed the presence of new particles near the top of the planetary boundary layer (PBL), their origins and the direction of their vertical transport have remained ambiguous. Here, we propose and validate an analytical framework using airborne eddy-covariance (EC) and continuous wavelet transform (CWT) to directly quantify the vertical flux of newly formed particles and determine its dominant vertical transportation direction. Analyzing data from a dedicated airborne campaign over the Southern Great Plains, we observed a persistent and strong downward particle flux during NPF events, with a mean value of 133.8 cm?3 m s?¹ downward flux in the entrainment zone, whereas fluxes on non-NPF days were negligible. Our spectral analysis further confirms that these directional fluxes can be reliably captured using standard 1 Hz aerosol instrumentation. These findings suggest that new particle formation, driven by the entrainment of air from the overlying residual/stable layer during PBL growth, is a significant and potentially understudied source of boundary layer aerosols. The framework presented here provides a methodology to correctly attribute NPF events to specific altitudes, thereby improving the mechanistic understanding required for accurate atmospheric models.

Zhang, Ruoyu↗
DOE OSTI2022

Understanding Recent Global Hydroclimate Change Using Multivariate Detection and Attribution Techniques and GCM Experiments

The observed slowdown in the rate of global average surface temperature (T) warming during the post-1998 decade (referred to at the time as the “global warming hiatus”) posed a challenge for climate researchers because it was not captured in global climate models projection. Observational and modeling evidence hinted that that leveling of the T trend was linked with the simultaneous appearance of cold surface temperature in the eastern equatorial Pacific that formed a protracted La Niña-like state, a phenomenon known as the Inter-decadal Pacific Oscillation (IPO). It was however not clear whether the concurrent equatorial Pacific cooling was a regional response to the rise in atmospheric greenhouse gas levels or anthropogenic aerosols that is not captured by the climate models or whether it was an unrelated, serendipitous manifestation of a natural phenomenon, internal to the climate system. To resolve this issue, we proposed in this project to develop and apply fingerprinting methods to differentiate between the observed climate response to various external forcing agents and the manifestations of internal climate variability. The project also sought to find out if climate models are able to reproduce the change signals detected in key observational phenomena and if they can be used to investigate the underlying processes. As such we examined changes in global hydroclimate variability and in an outstanding example of regional hydroclimate change, namely the multi-decadal 20 th century change in Sahel rainfall.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Modeling Volatility-Based Aerosol Phase State Predictions in the Amazon Rainforest

Organic aerosol (OA) is a complex matrix of various constituents—fresh (primary organic aerosols—POA) and aged via oxidation (secondary organic aerosols—SOA), generated from biogenic, anthropogenic, and biomass burning sources. The viscosity of OA can be critical in influencing new particle formation, reactive uptake processes that impact evaporation-growth kinetics, and the lifetime of particles in the atmosphere. We report this work utilizes a well-defined relationship between volatility and viscosity for pure compounds, which we incorporated within the Weather Research and Forecasting Model coupled to chemistry (WRF-Chem) to simulate the phase state and viscosity of bulk OA during the dry-to-wet transition season (September–October) in the Amazon rainforest during 2014. Our simulations indicate spatial and temporal heterogeneity in aerosol phase state often not captured by global-scale models. We show the strong role of water associated with organic aerosol ($w_s$) as the dominant factor that can be used to quantitatively estimate OA viscosity. Analysis of WRF-Chem simulations across the entire atmospheric column indicates a strong inverse log-linear relationship between $w_s$ and OA viscosity with a correlation coefficient approaching 1, in the background and biomass burning-influenced conditions. At high altitudes where relative humidity (RH) and temperatures are low, our simulations indicate that OA exists in a semisolid-/solid-like phase state, consistent with previous studies. OA hygroscopicity is strongly correlated (ca. –0.8) with OA viscosity at RH ca. 30–50%, but this RH range is found mostly at low OA concentrations and the middle troposphere (ca. 6–10 km altitudes) in our simulated domain. OA hygroscopicity is uncorrelated with viscosity at higher-RH (near surface) and lower-RH (upper troposphere) regimes. At the urban site near surface, where day–night differences in RH are significant, RH is found to drive the phase state. At the background forested site near surface, where day–night RH differences are small, biomass burning-influenced OA is semisolid and a significant OA associated with background conditions is liquid-like. Simulations indicate a long tail of OA viscosity frequency distributions extending in the semisolid/solid regimes over background biogenic-influenced conditions due to the role of low-volatility OA components such as monoterpene oxidation products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Efficacy of a portable, moderate-resolution, fast-scanning differential mobility analyzer for ambient aerosol size distribution measurements

Abstract. Ambient aerosol size distributions obtained with a compact scanning mobility analyzer, the “Spider” differential mobility analyzer (DMA), are compared to those obtained with a conventional mobility analyzer, with specific attention to the effect of mobility resolution on the measured size distribution parameters. The Spider is a 12 cm diameter radial differential mobility analyzer that spans the 10–500 nm size range with 30 s mobility scans. It achieves its compact size by operating at a nominal mobility resolution R=3 (sheath flow = 0.9 L min−1; aerosol flow = 0.3 L min−1) in place of the higher ratio of sheath flow to aerosol flow commonly used. The question addressed here is whether the lower resolution is sufficient to capture key characteristics of ambient aerosol size distributions. The Spider, operated at R=3 with 30 s up- and downscans, was co-located with a TSI 3081 long-column mobility analyzer, operated at R=10 with a 360 s sampling duty cycle. Ambient aerosol data were collected over 26 consecutive days of continuous operation, in Pasadena, CA. Over the 17–500 nm size range, the two instruments exhibit excellent correlation in the total particle number concentrations and geometric mean diameters, with regression slopes of 1.13 and 1.00, respectively. Our results suggest that particle sizing at a lower resolution than typically employed may be sufficient to obtain key properties of ambient size distributions, at least for these two moments of the size distribution. Moreover, it enables better counting statistics, as the wider transfer function for a given aerosol flow rate results in a higher counting rate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Capturing the Relative‐Humidity‐Sensitive Gas–Particle Partitioning of Organic Aerosols in a 2D Volatility Basis Set

Abstract Aerosol water affects the physicochemical properties and mass concentration of organic aerosols (OA), but it is typically omitted by air quality, weather, and climate models. We compare two classes of simplified models to estimate the OA water uptake and gas–particle partitioning of organic compounds. One class uses a single‐hygroscopicity‐parameter (κ) approach while the other is based on the reduced‐complexity Binary Activity Thermodynamics (BAT) model. We show that a BAT‐based two‐dimensional volatility basis set (VBS) model always predicts a higher OA mass concentration at elevated relative humidity (RH), for example, ∼16% at 80% RH, than any variation of theκ‐based method considered—even when BAT‐VBS predicts a lower water uptake. The main reason being that the BAT‐VBS model captures variations in effective saturation mass concentration of organics (C*) with RH, a feature that other VBS methods lack. The BAT‐VBS framework offers an efficient, RH‐sensitive treatment for reduced‐complexity OA modeling.

Geology↗
NASA NTRS2012

Constraining Aerosol Optical Models Using Ground-Based, Collocated Particle Size and Mass Measurements in Variable Air Mass Regimes During the 7-SEAS/Dongsha Experiment

During the spring of 2010, NASA Goddard's COMMIT ground-based mobile laboratory was stationed on Dongsha Island off the southwest coast of Taiwan, in preparation for the upcoming 2012 7-SEAS field campaign. The measurement period offered a unique opportunity for conducting detailed investigations of the optical properties of aerosols associated with different air mass regimes including background maritime and those contaminated by anthropogenic air pollution and mineral dust. What appears to be the first time for this region, a shortwave optical closure experiment for both scattering and absorption was attempted over a 12-day period during which aerosols exhibited the most change. Constraints to the optical model included combined SMPS and APS number concentration data for a continuum of fine and coarse-mode particle sizes up to PM2.5. We also take advantage of an IMPROVE chemical sampler to help constrain aerosol composition and mass partitioning of key elemental species including sea-salt, particulate organic matter, soil, non sea-salt sulphate, nitrate, and elemental carbon. Our results demonstrate that the observed aerosol scattering and absorption for these diverse air masses are reasonably captured by the model, where peak aerosol events and transitions between key aerosols types are evident. Signatures of heavy polluted aerosol composed mostly of ammonium and non sea-salt sulphate mixed with some dust with transitions to background sea-salt conditions are apparent in the absorption data, which is particularly reassuring owing to the large variability in the imaginary component of the refractive indices. Extinctive features at significantly smaller time scales than the one-day sample period of IMPROVE are more difficult to reproduce, as this requires further knowledge concerning the source apportionment of major chemical components in the model. Consistency between the measured and modeled optical parameters serves as an important link for advancing remote sensing and climate research studies in dynamic aerosol-rich environments like Dongsha.

Bell, Shaun W.↗