Search NASA⌕ Search

SEARCH · Search NASA

Results for “aerosol capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2026

Modeling Large Dust Aerosols in the Community Earth System Model Version 2 (CESM2)

Dust aerosols have a wide size distribution from less than 0.1 to over 100 μm and dominate Earth's atmospheric aerosol mass. However, most Earth system models (ESMs) inadequately represent dust aerosols larger than 10 μm in diameter, limiting the accuracy of the simulated dust cycle and climate impacts. Here, we introduce a new modeling framework that captures the full observed size distribution of dust aerosols, incorporating recent advances into a mineral-resolved version of the Community ESM, while addressing known issues in previous versions. Comprehensive evaluation against diverse observations of bulk dust and component minerals demonstrates that the model reproduces the observed dust cycle across particle sizes. Incorporating the previously unrepresented large-dust fractions substantially alters dust budget estimates, highlighting potential changes in simulated climate impacts and underscoring the importance of comprehensive size-resolved dust modeling. Despite these advancements, uncertainties persist. Our results indicate that a size-dependent reduction in settling velocity is required to reproduce the observed dust size distribution downwind of source regions. Specifically, in the new model, the gravitational settling velocity of dust particles larger than 10 μm in diameter must be reduced by as much as 85% to achieve agreement with observations. This empirical reduction serves as a constraint on physics-based models of dust settling. Future developments should address misrepresented physical processes that hinder accurate modeling of the large dust aerosol transport. Expanding observational data sets covering the full-size distribution is also essential to better constrain the dust cycle and improve the representation of dust optical properties and climate effects.

mineral dust↗
NASA NTRS2024

The Diurnal Variation of Dust and Water Ice Aerosol Optical Depth at Jezero Crater Observed By MEDA/TIRS Over A Full Martian Year

The Thermal InfraRed Sensor (TIRS) on the Perseverance rover has provided nearly two full Mars years of systematic monitoring of the total aerosol optical depth above Jezero Crater. These observations span a wide range of timescales, capturing seasonal patterns, diurnal variations, and minute-to-minute fluctuations in aerosol loading. By combining TIRS retrievals with orbital observations, the relative contributions of dust and water ice aerosols can be estimated, revealing their different seasonal and diurnal behaviors. The TIRS record shows distinct periods of dust storm activity, including strong regional storms during the perihelion season as well as short lived but intense dust events outside the typical dust storm season. Water ice clouds exhibit pronounced seasonal and diurnal variability, with peak activity occurring during the aphelion season but with a presence throughout the year. The diurnal variation of clouds differs significantly between the aphelion and perihelion seasons, with clouds persisting throughout the night during the aphelion season, while largely absent outside of specific periods after sunrise and sunset during the perihelion season. These results provide new insights into the complex behavior of aerosols at Jezero Crater and their connections to atmospheric dynamics and the Martian dust and water cycles.

Michael D Smith↗
NASA NTRS2017

Daily Kilometer-Scale MODIS Satellite Maps of PM2.5 Describe Wintertime Episodes

The San Joaquin Valley (SJV) suffers from severe health-endangering episodes of PM2.5 aerosol loadings in wintertime; episodes last approximately 5 days and differ in geographical distribution and composition. PM2.5 stations are scattered; consequently the use of remote sensing to map variable regional patterns of these varying respirable aerosol concentrations is desirable. High-precision AOT retrievals can capture column particulate loading. However,PM2.5 mapping is challenging due to several reasons: particularly thin mixed layers (ML) and thus relatively low aerosol optical thickness (AOT) close to current measurement limits, variable and a typical composition of the aerosols, and complex surface bidirectional reflectance. However, the West does present some advantages in analysis. Air basins are isolated from long-distance transport, and experience predominant strong meteorological subsidence. Thus these Western basin regions have fewer problematic cases of overriding aerosol layers detached from the surface. To counter such local overriding, Chu et al. have described an approach for the Eastern US, and He et al have described a synoptic classification approach useful in Shanghai. The Bay Area Air Quality Management District (BAAQMD) expands our experience with the use of AOT, with lower PM2.5 and several isolated sub-basins. We have prepared daily maps of episodes in each region. We present also a sequence of increasingly detailed statistical models, AOT initially appears to contribute little information; however, inclusion of weather information reveals its utility. Lyapustin and Wang's MultiAngle Implementation of Atmospheric Correction (MAIAC) retrieval for AOT provided the most useful operational remote sensing information for these regions. It provides high (1-km) spatial resolution maps and a high percentage of availability. Empirical regression methods have found that random effects regression models (aka mixed effects models, ME) employing AOT provide good estimates of ground PM2.5 concentrations.Here, we attempt to extend these methods and evaluate the usefulness of AOT with greater physical analysis, based on DISCOVER-AQ4 experience.

Chatfield, Robert B.↗
NASA NTRS2003

Environmental Snapshots for Satellite Multi-Angle Aerosol Retrieval Validation During the ACE-Asia Field Campaign

On five occasions spanning the ACE-Asia field experiment in spring 2001, the multi-angle imaging MISR instrument, flying aboard the NASA Earth Observing System s Terra satellite, took quarter-kilometer data over a 400-km-wide swath, coincident with high-quality observations by multiple instruments on two or more participating surface and airborne platforms. The cases capture a range of clean, polluted, and dusty aerosol conditions. They represent some of the best opportunities during ACE- Asia for comparative studies among intensive and extensive aerosol observations in their environmental context. We inter-compare related measurements and discuss the implications of apparent discrepancies for each case, at a level of detail appropriate to the analysis of satellite observations. With a three-stage optical modeling process, we synthesize data from multiple sources into layer-by-layer snapshots that summarize what we know about the state of the atmosphere and surface at key locations during each event, to be used for satellite vicarious calibration and aerosol retrieval validation. Aerosols within a few kilometers of the surface were composed primarily of pollution and Asian dust mixtures, as expected. Accumulation and coarse-mode particle size distributions varied little among the events studied, but column aerosol optical depth changed by more than a factor of four, and the near-surface proportion of dust ranged from about 25% to 50%. The amount of absorbing material in the sub-micron fraction was highest when near-surface winds crossed Beijing and the Korean Peninsula, and was considerably lower for all other cases. Ambiguities remain in segregating size distributions by composition; having simultaneous single scattering albedo measurements at more than a single wavelength would significantly reduce the resulting optical model uncertainties, as would integral constraints from surface and atmospheric radiative flux observations. The consistency of component particle micro-physical properties among the five events, even in this relatively complex aerosol environment, suggests that global, satellite-derived maps of aerosol-air-mass-type extent, combined with targeted in situ measurements, can provide a detailed global picture of aerosol behavior. Further joint satellite and in situ analysis is needed to assess the spatial variability of both intensive and extensive aerosol properties within aerosol air masses in two spatial dimensions.

Kahn, Ralph↗
NASA NTRS1999

Global Distribution of Aerosols Over the Open Ocean as Derived from the Coastal Zone Color Scanner

Climatological maps of monthly mean aerosol radiance levels derived from the coastal zone color scanner (CZCS) were constructed for the world's ocean basins. This is the first study to use the 7.5.-year CZCS data set to examine the distribution and seasonality of aerosols over the open ocean on a global scale. Examination of our satellite images found the most prominent large-scale patch of elevated aerosol radiances in each month off the coast of northwest Africa. The well-known, large-scale plumes of elevated aerosol levels in the Arabian Sea, the northwest Pacific, and off the east coast of North America were also successfully captured. Radiance data were extracted from 13 major open-ocean zones, ranging from the subpolar to equatorial regions. Results from these extractions revealed the aerosol load in both subpolar and subtropical zones to be higher in the Northern Hemisphere than in the Southern Hemisphere. Aerosol radiances in the subtropics of both hemispheres were about 2 times higher in summer than in winter. In subpolar regions, aerosol radiances in late spring/early summer were almost 3 times that observed in winter. In general, the aerosol signal was higher during the warmer months and lower during the cooler months, irrespective of location. A comparison between our mean monthly aerosol radiance maps with mean monthly chlorophyll maps (also from CZCS) showed similar seasonality between aerosol and chlorophyll levels in the subpolar zones of both hemispheres, i.e., high levels in summer, low levels in winter. In the subtropics of both hemispheres, however, chlorophyll levels were higher in winter months which coincided with a depressed aerosol signal. Our results indicate that the near-IR channel on ocean color sensors can be used to successfully capture well-known, large-scale aerosol plumes on a global scale and that future ocean color sensors may provide a platform for long-term synoptic studies of combined aerosol-phytoplankton productivity interactions.

Stegmann, P. M.↗
NASA NTRS2019

A New Method to Retrieve the Diurnal Variability of Planetary Boundary Layer Height from Lidar Under Different Thermodynamic Stability Conditions

The planetary boundary layer height (PBLH) is an important parameter for understanding the accumulation of pollutants and the dynamics of the lower atmosphere. Lidar has been used for tracking the evolution of PBLH by using aerosol backscatter as a tracer, assuming aerosol is generally well-mixed in the PBL; however, the validity of this assumption actually varies with atmospheric stability. This is demonstrated here for stable boundary layers (SBL), neutral boundary layers (NBL), and convective boundary layers (CBL) using an 8-year dataset of micropulse lidar (MPL) and radiosonde (RS) measurements at the ARM Southern Great Plains, and MPL at the GSFC site. Due to weak thermal convection and complex aerosol stratification, traditional gradient and wavelet methods can have difficulty capturing the diurnal PBLH variations in the morning and forenoon, as well as under stable conditions generally. A new method is developed that combines lidar-measured aerosol backscatter with a stability dependent model of PBLH temporal variation (DTDS). The latter helps “recalibrate” the PBLH in the presence of a residual aerosol layer that does not change in harmony with PBL diurnal variation. The hybrid method offers significantly improved PBLH detection, with better correlation and smaller biases, under most thermodynamic conditions, especially for SBL and CBL. Relying on the physical process of PBL diurnal development, different schemes are developed for growing, maintenance, and decaying periods. Comprehensive evaluation of this new method shows much better tracking of diurnal PBLH variation and significantly smaller biases under various pollution levels.

Tianning Su↗
NASA NTRS2014

Revisiting AVHRR Tropospheric Aerosol Trends Using Principal Component Analysis

The advanced very high resolution radiometer (AVHRR) satellite instruments provide a nearly 25 year continuous record of global aerosol properties over the ocean. It offers valuable insights into the long-term change in global aerosol loading. However, the AVHRR data record is heavily influenced by two volcanic eruptions, El Chichon on March 1982 and Mount Pinatubo on June 1991. The gradual decay of volcanic aerosols may last years after the eruption, which potentially masks the estimation of aerosol trends in the lower troposphere, especially those of anthropogenic origin. In this study, we show that a principal component analysis approach effectively captures the bulk of the spatial and temporal variability of volcanic aerosols into a single mode. The spatial pattern and time series of this mode provide a good match to the global distribution and decay of volcanic aerosols. We further reconstruct the data set by removing the volcanic aerosol component and reestimate the global and regional aerosol trends. Globally, the reconstructed data set reveals an increase of aerosol optical depth from 1985 to 1990 and decreasing trend from 1994 to 2006. Regionally, in the 1980s, positive trends are observed over the North Atlantic and North Arabian Sea, while negative tendencies are present off the West African coast and North Pacific. During the 1994 to 2006 period, the Gulf of Mexico, North Atlantic close to Europe, and North Africa exhibit negative trends, while the coastal regions of East and South Asia, the Sahel region, and South America show positive trends.

volcanoes↗
NASA NTRS2019

Evaluation of Global Simulations of Aerosol Particle and Cloud Condensation Nuclei Number, with Implications for Cloud Droplet Formation

A total of 16 global chemistry transport models and general circulation models have participated in this study; 14 models have been evaluated with regard to their ability to reproduce the near-surface observed number concentration of aerosol particles and cloud condensation nuclei (CCN), as well as derived cloud droplet number concentration (CDNC). Model results for the period 2011-2015 are compared with aerosol measurements (aerosol particle number, CCN and aerosol particle composition in the submicron fraction) from nine surface stations located in Europe and Japan. The evaluation focuses on the ability of models to simulate the average across time state in diverse environments and on the seasonal and short-term variability in the aerosol properties. There is no single model that systematically performs best across all environments represented by the observations. Models tend to underestimate the observed aerosol particle and CCN number concentrations, with average normalized mean bias (NMB) of all models and for all stations, where data are available, of -24% and -35% for particles with dry diameters > 50 and > 120nm, as well as -36% and -34% for CCN at supersaturations of 0.2% and 1.0%, respectively. However, they seem to behave differently for particles activating at very low supersaturations (< 0.1%) than at higher ones. A total of 15 models have been used to produce ensemble annual median distributions of relevant parameters. The model diversity (defined as the ratio of standard deviation to mean) is up to about 3 for simulated N3 (number concentration of particles with dry diameters larger than 3 nm) and up to about 1 for simulated CCN in the extra-polar regions. A global mean reduction of a factor of about 2 is found in the model diversity for CCN at a supersaturation of 0.2% (CCN(0.2)) compared to that for N3, maximizing over regions where new particle formation is important. An additional model has been used to investigate potential causes of model diversity in CCN and bias compared to the observations by performing a perturbed parameter ensemble (PPE) accounting for uncertainties in 26 aerosol-related model input parameters. This PPE suggests that biogenic secondary organic aerosol formation and the hygroscopic properties of the organic material are likely to be the major sources of CCN uncertainty in summer, with dry deposition and cloud processing being dominant in winter. Models capture the relative amplitude of the seasonal variability of the aerosol particle number concentration for all studied particle sizes with available observations (dry diameters larger than 50, 80 and 120nm). The short-term persistence time (on the order of a few days) of CCN concentrations, which is a measure of aerosol dynamic behavior in the models, is underestimated on average by the models by 40% during winter and 20% in summer.

cloud droplets↗
NASA NTRS2020

The Relationship Between MAIAC Smoke Plume Heights and Surface PM

Biomass burning is a source of fine particulate matter (PM2.5) air pollution, which adversely impacts human health. However, quantifying the health effects from biomass burning PM2.5 is difficult. Monitoring networks generally lack the spatial density needed to capture the heterogeneity of biomass burning smoke. Satellite aerosol optical depth (AOD) can be used to fill spatial gaps but does not distinguish surface‐level aerosols. Plume height (PH) observations may provide constraints on the vertical distribution of smoke and its impact on surface concentrations. We assessed PH characteristics from Multi‐Angle Implementation of Atmospheric Correction (MAIAC) and evaluated its correlation with colocated PM2.5 and AOD measurements. PH is generally highest over the western United States. The ratio PM2.5:AOD generally decreases with increasing PH:PBLH (planetary boundary layer height), showing that PH has the potential to refine surface PM2.5 estimates for collections of smoke events.

satellite retrieved smoke plume heights↗
NASA NTRS2022

Measurement report: Closure Analysis of Aerosol–cloud Composition in Tropical Maritime Warm Convection

Cloud droplet chemical composition is a key observable property that can aid understanding of how aerosols and clouds interact. As part of the Clouds, Aerosols and Monsoon Processes – Philippines Experiment (CAMP2Ex), three case studies were analyzed involving collocated airborne sampling of relevant clear and cloudy air masses associated with maritime warm convection. Two of the cases represented a polluted marine background, with signatures of transported East Asian regional pollution, aged over water for several days, while the third case comprised a major smoke transport event from Kalimantan fires. Sea salt was a dominant component of cloud droplet composition, in spite of fine particulate enhancement from regional anthropogenic sources. Furthermore, the proportion of sea salt was enhanced relative to sulfate in rainwater and may indicate both a propensity for sea salt to aid warm rain production and an increased collection efficiency of large sea salt particles by rain in subsaturated environments. Amongst cases, as precipitation became more significant, so too did the variability in the sea salt to (non-sea salt) sulfate ratio. Across cases, nitrate and ammonium were fractionally greater in cloud water than fine-mode aerosol particles; however, a strong covariability in cloud water nitrate and sea salt was suggestive of prior uptake of nitrate on large salt particles. A mass-based closure analysis of non-sea salt sulfate compared the cloud water air-equivalent mass concentration to the concentration of aerosol particles serving as cloud condensation nuclei for droplet activation. While sulfate found in cloud was generally constrained by the sub-cloud aerosol concentration, there was significant intra-cloud variability that was attributed to entrainment – causing evaporation of sulfate-containing droplets –and losses due to precipitation. In addition, precipitation tended to promote mesoscale variability in the sub-cloud aerosol through a combination of removal, convective downdrafts, and dynamically driven convergence. Physical mechanisms exerted such strong control over the cloud water compositional budget that it was not possible to isolate any signature of chemical production/loss using in-cloud observations. The cloud-free environment surrounding the non-precipitating smoke case indicated sulfate enhancement compared to convective mixing quantified by a stable gas tracer; however, this was not observed in the cloud water (either through use of ratios or the mass closure), perhaps implying that the warm convective cloud timescale was too short for chemical production to be a leading-order budgetary term and because precursors had already been predominantly exhausted. Closure of other species was truncated by incomplete characterization of coarse aerosol (e.g., it was found that only 10 %–50% of sea salt mass found in cloud was captured during clear-air sampling) and unmeasured gasphase abundances affecting closure of semi-volatile aerosol species (e.g., ammonium, nitrate and organic) and soluble volatile organic compound contributions to total organic carbon in cloud water.

Ewan Crosbie↗
NASA NTRS2019

CALIPSO Level 3 Stratospheric Aerosol Product: Version 1.00 Algorithm Description and Initial Assessment

In August 2018,the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) project released a new level 3 stratospheric aerosol profile data product derived from nearly 12 years of measurements acquired by the space-borne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP).This monthly averaged, gridded level 3 product is based on version 4.2 of the CALIOP level 1 and level 2 data products, which feature significantly improved calibration that now makes it possible to reliably retrieve profiles of stratospheric aerosol extinction and backscatter coefficients. This paper describes the science algorithm and data handling techniques that were developed to generate the CALIPSO version 1.00 level 3 stratospheric aerosol profile product. Further, we show that the retrieved extinction profiles capture the major stratospheric perturbations over the last decade resulting from volcanic eruptions, extreme smoke events, and signatures of stratospheric dynamics. Initial assessment of the product by inter-comparison with the stratospheric aerosol retrievals from the Stratospheric Aerosol and Gas Experiment III (SAGE III) on the International Space Station (ISS) indicates good agreement in the tropical stratospheric aerosol layer (30oN-30oS),where the average difference between zonal mean extinction profiles is typically less than 25% between 20km and 30km. However, differences can exceed 100% in the very low aerosol loading regimes found above 25 km at higher latitudes.

Jayanta Kar↗
NASA NTRS2017

Quantifying Black Carbon Deposition Over the Greenland Ice Sheet from Forest Fires in Canada

Black carbon (BC) concentrations observed in 22 snowpits sampled in the northwest sector of the Greenland ice sheet in April 2014 have allowed us to identify a strong and widespread BC aerosol deposition event, which was dated to have accumulated in the pits from two snow storms between 27 July and 2 August 2013. This event comprises a significant portion (57 on average across all pits) of total BC deposition over 10 months (July 2013 to April 2014). Here we link this deposition event to forest fires burning in Canada during summer 2013 using modeling and remote sensing tools. Aerosols were detected by both the Cloud-Aerosol Lidar with Orthogonal Polarization (on board CALIPSO) and Moderate Resolution Imaging Spectroradiometer (Aqua) instruments during transport between Canada and Greenland. We use high-resolution regional chemical transport modeling (WRF-Chem) combined with high-resolution fire emissions (FINNv1.5) to study aerosol emissions, transport, and deposition during this event. The model captures the timing of the BC deposition event and shows that fires in Canada were the main source of deposited BC. However, the model underpredicts BC deposition compared to measurements at all sites by a factor of 2100. Underprediction of modeled BC deposition originates from uncertainties in fire emissions and model treatment of wet removal of aerosols. Improvements in model descriptions of precipitation scavenging and emissions from wildfires are needed to correctly predict deposition, which is critical for determining the climate impacts of aerosols that originate from fires.

albedo↗
NASA NTRS2022

Global Dust Cycle and Direct Radiative Effect in E3SM Version 1: Impact of Increasing Model Resolution

Quantification of dust aerosols in Earth System Models (ESMs) has important implications for water cycle and biogeochemistry studies. This study examines the global life cycle and direct radiative effects (DREs) of dust in the U.S. Department of Energy's Energy Exascale Earth System Model version 1 (E3SMv1), and the impact of increasing model resolution both horizontally and vertically. The default 1° E3SMv1 captures the spatial and temporal variability in the observed dust aerosol optical depth (DAOD) reasonably well, but overpredicts dust absorption in the shortwave (SW). Simulations underestimate the dust vertical and long-range transport, compared with the satellite dust extinction profiles. After updating dust refractive indices and correcting for a bias in partitioning size-segregated emissions, both SW cooling and longwave (LW) warming of dust simulated by E3SMv1 are increased and agree better with other recent studies. The estimated net dust DRE of −0.42 Wm−2 represents a stronger cooling effect than the observationally based estimate −0.2 Wm−2 (−0.48 to +0.2), due to a smaller LW warming. Constrained by a global mean DAOD, model sensitivity studies of increasing horizontal and vertical resolution show strong influences on the simulated global dust burden and lifetime primarily through the change of dust dry deposition rate; there are also remarkable differences in simulated spatial distributions of DAOD, DRE, and deposition fluxes. Thus, constraining the global DAOD is insufficient for accurate representation of dust climate effects, especially in transitioning to higher- or variable-resolution ESMs. Better observational constraints of dust vertical profiles, dry deposition, size, and LW properties are needed.

dust aerosol↗
NASA NTRS2015

Evaluation of the Global Aerosol Microphysical ModelE2-TOMAS Model Against Satellite and Ground-Based Observations

The TwO-Moment Aerosol Sectional (TOMAS) microphysics model has been integrated into the state-of-the- art general circulation model, GISS ModelE2. This paper provides a detailed description of the ModelE2-TOMAS model and evaluates the model against various observations including aerosol precursor gas concentrations, aerosol mass and number concentrations, and aerosol optical depths. Additionally, global budgets in ModelE2-TOMAS are compared with those of other global aerosol models, and the ModelE2-TOMAS model is compared to the default aerosol model in ModelE2, which is a one-moment aerosol (OMA) model (i.e. no aerosol microphysics). Overall, the ModelE2- TOMAS predictions are within the range of other global aerosol model predictions, and the model has a reasonable agreement (mostly within a factor of 2) with observations of sulfur species and other aerosol components as well as aerosol optical depth. However, ModelE2-TOMAS (as well as ModelE2-OMA) cannot capture the observed vertical distribution of sulfur dioxide over the Pacific Ocean, possibly due to overly strong convective transport and over-predicted precipitation. The ModelE2-TOMAS model simulates observed aerosol number concentrations and cloud condensation nuclei concentrations roughly within a factor of 2. Anthropogenic aerosol burdens in ModelE2-OMA differ from ModelE2-TOMAS by a few percent to a factor of 2 regionally, mainly due to differences in aerosol processes including deposition, cloud processing, and emission parameterizations. We observed larger differences for naturally emitted aerosols such as sea salt and mineral dust, as those emission rates are quite different due to different upper size cutoff assumptions.

Lee, Y. H.↗
NASA NTRS2013

Aerosol Airmass Type Mapping Over the Urban Mexico City Region From Space-based Multi-angle Imaging

Using Multi-angle Imaging SpectroRadiometer (MISR) and sub-orbital measurements from the 2006 INTEX-B/MILAGRO field campaign, in this study we explore MISR's ability to map different aerosol air mass types over the Mexico City metropolitan area. The aerosol air mass distinctions are based on shape, size and single scattering albedo retrievals from the MISR Research Aerosol Retrieval algorithm. In this region, the research algorithm identifies dust-dominated aerosol mixtures based on non-spherical particle shape, whereas spherical biomass burning and urban pollution particles are distinguished by particle size. Two distinct aerosol air mass types based on retrieved particle microphysical properties, and four spatially distributed aerosol air masses, are identified in the MISR data on 6 March 2006. The aerosol air mass type identification results are supported by coincident, airborne high-spectral-resolution lidar (HSRL) measurements. Aerosol optical depth (AOD) gradients are also consistent between the MISR and sub-orbital measurements, but particles having single-scattering albedo of approx. 0.7 at 558 nm must be included in the retrieval algorithm to produce good absolute AOD comparisons over pollution-dominated aerosol air masses. The MISR standard V22 AOD product, at 17.6 km resolution, captures the observed AOD gradients qualitatively, but retrievals at this coarse spatial scale and with limited spherical absorbing particle options underestimate AOD and do not retrieve particle properties adequately over this complex urban region. However, we demonstrate how AOD and aerosol type mapping can be accomplished with MISR data over complex urban regions, provided the retrieval is performed at sufficiently high spatial resolution, and with a rich enough set of aerosol components and mixtures.

aerosol optical depth↗
NASA NTRS2020

Recover Gas from Liquids in Low Gravity

This document is the final report resulting from the work conducted by undergraduate students at the University of South Alabama during the 2019/2020 academic year. Currently, on the International Space Station a solid adsorbent material is used to remove CO 2 from cabin air; however, liquid absorbent/reactive based systems are appealing because they may offer greater CO 2 capture efficiency. When liquids are used to capture CO 2 a regeneration step is required to release the CO 2 from the fluid for subsequent processing. During regeneration aerosolized droplets of water and liquid amines are produced creating a 2-phase fluid stream. Because the CO 2 stream is to be sent to a Sabatier reactor for conversion into methane, the droplets of the water and amines must be removed, necessitating the need for a vapor/liquid separation process in a microgravity environment. This class was tasked with designing a system to separate the aerosolized droplets from the gas stream. An ionic liquid was assumed to be the amine based absorber fluid that was used to capture the CO 2 , which is a key assumption because the ionic liquid has vanishingly low vapor pressure. The lack of volatility of the ionic liquid eliminates the need to manage an aerosolized amine resulting in only an aerosolized water air separation. To solve this challenge an undergraduate class used systems engineering to design and construct a hydrophobic screen separation apparatus for a 2-phase, vapor/liquid flow. The apparatus was constructed, but initial testing was not possible due to the closure of the University labs due to the corona-virus pandemic.

T Grant Glover↗
NASA NTRS2022

Understanding Model-Observation Discrepancies in Satellite Retrievals of Atmospheric Temperature Using GISS ModelE

We examine multiple factors in the representation of satellite-retrieved atmospheric temperature diagnostics in historical simulations of climate change during the satellite era (specifically 1979–2021) using GISS ModelE contributions to the Coupled Model Intercomparison Project (Phase 6) (CMIP6). The tropospheric and stratospheric trends in these diagnostics are affected by greenhouse gases (notably carbon dioxide and ozone), coupling with the ocean, volcanic aerosols, solar activity and compositional and dynamic feedbacks. We explore the impacts of internal variability, changing forcing specifications, composition interactivity, the quality of the stratospheric circulation, vertical resolution, and possible impacts of the mis-specification of volcanic aerosol optical depths. Overall temperature trends throughout the satellite period are well captured, but discrepancies at all levels exist and have multiple distinct causes. We find that stratospheric comparisons (using Stratospheric Sounding Unit (SSU) retrievals and successor instruments) are most affected by variations in the representation of ozone depletion and feedbacks, followed by the volcanic signals. Tropospheric skill (using the Microwave Sounding Unit (MSU) retrievals) is affected by the trends in ocean heat uptake and tropospheric aerosols, but also by the representation of stratospheric processes through the impact of the Brewer-Dobson circulation on the height of the tropical tropopause. We demonstrate that no single factor is the dominant cause of the discrepancies and that almost all observations lie within the broad envelope of structural uncertainty.

satellite retrievals of atmospheric temperature↗
NASA NTRS2013

Absorption and Scattering by Molecules and Particles

The Earth's atmosphere absorbs, scatters, and emits electromagnetic radiation. Although air molecules are the primary actors in these processes, aerosol particles are also present ubiquitously and modify the radiation field. In fact, this modification constitutes the very physical basis of aerosol remote sensing. Whenever clouds are present, they have a much larger influence on radiation which largely overshadows the aerosol impact. Therefore, in aerosol remote sensing, one often has to limit observations to cloudless conditions and screen cloudy pixels. In the solar part of the spectrum, molecular absorption is mostly limited to ultraviolet (UV; ozone) and near-infrared (near-IR; carbon dioxide, water vapor) wavelengths and is characterized by strong and narrow oxygen bands. A brief description of atmospheric molecular absorption is presented in Section 2.2. Shortwave aerosol remote sensing is usually performed outside the absorption bands, but some instruments also have channels capturing absorption bands with the objective of quantifying gaseous components.

remote sensing↗