Search NASA⌕ Search

SEARCH · Search NASA

Results for “alignments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Mass Dependence of Galaxy–Halo Alignment in LOWZ and CMASS

We measure the galaxy-ellipticity (GI) correlations for the Sloan Digital Sky Survey Data Release 12 LOWZ and CMASS samples with the shape measurements from the DESI Legacy Imaging Surveys. We model the GI correlations in an N-body simulation with our recent accurate stellar–halo mass relation from the Photometric object Around Cosmic webs (PAC) method. The large data set and our accurate modeling turns out an accurate measurement of the alignment angle between central galaxies and their host halos. We find that the alignment of central elliptical galaxies with their host halos increases monotonically with galaxy stellar mass or host halo mass, which can be well described by a power law for the massive galaxies. We also find that central elliptical galaxies are more aligned with their host halos in LOWZ than in CMASS, which might indicate an evolution of galaxy–halo alignment, though future studies are needed to verify this is not induced by the sample selections. In contrast, central disk galaxies are aligned with their host halos about 10 times more weakly in the GI correlation. These results have important implications for intrinsic alignment (IA) correction in weak lensing studies, IA cosmology, and theory of massive galaxy formation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Current Sheet Alignment in Oblique Black Hole Magnetospheres: A Black Hole Pulsar?

Abstract We study the magnetospheric evolution of a nonaccreting spinning black hole (BH) with an initially inclined split monopole magnetic field by means of 3D general relativistic magnetohydrodynamic simulations. This serves as a model for a neutron star (NS) collapse or a BH–NS merger remnant after the inherited magnetosphere has settled into a split monopole field creating a striped wind. We show that the initially inclined split monopolar current sheet aligns over time with the BH equatorial plane. The inclination angle evolves exponentially toward alignment, with an alignment timescale that is inversely proportional to the square of the BH angular velocity, where higher spin results in faster alignment. Furthermore, magnetic reconnection in the current sheet leads to exponential decay of event-horizon-penetrating magnetic flux with nearly the same timescale for all considered BH spins. In addition, we present relations for the BH mass and spin in terms of the period and alignment timescale of the striped wind. The explored scenario of a rotating, aligning, and reconnecting current sheet can potentially lead to multimessenger electromagnetic counterparts to a gravitational-wave event due to the acceleration of particles powering high-energy radiation, plasmoid mergers resulting in coherent radio signals, and pulsating emission due to the initial misalignment of the BH magnetosphere.

Astronomy & Astrophysics↗
DOE OSTI2023

Ducted fuel injection system alignment device

An alignment device for a ducted fuel injection system comprising a mounting block removably attachable to a duct of the ducted fuel injection system. The mounting block can include a passageway extending therethrough. The passageway can align with the duct when the mounting block is attached to the duct. The alignment device further comprises an imaging device configured to capture an image viewing through the duct toward an outlet of a fuel injector. A portion of the imaging device can extend in the passageway. The alignment device additionally comprises a centering structure configured to align a portion of the imaging device with a central axis of the duct. The image captured by the imaging device can be configured for use aligning a position of an outlet of a fuel injector with respect to a position of the duct.

Nilsen, Christopher William↗
DOE OSTI2023

Stereolithography additive manufacturing of magnetically aligned liquid crystal elastomers

A method of forming a three-dimensional structure includes forming a layer of resin comprising liquid crystal oligomers and a photoinitiator, applying a magnetic field to the formed layer in a predefined alignment direction for substantially aligning the liquid crystal oligomers in a first orientation; and exposing the formed layer to radiation for curing a first portion of the layer during application of the magnetic field thereby resulting in the first portion having liquid crystal elastomers substantially aligned in the first orientation. The method includes applying a second magnetic field to the formed layer in a predefined second alignment direction for substantially aligning uncured liquid crystal oligomers in a second orientation, and exposing the layer to radiation for curing a second portion of the layer during application of the second magnetic field thereby resulting in the second portion having liquid crystal elastomers substantially aligned in the second orientation.

Arriaga, Rodrigo Telles↗
DOE OSTI2024

Digital Light Process 3D Printing of Magnetically Aligned Liquid Crystalline Elastomer Free–forms

Liquid crystalline elastomers (LCEs) are anisotropic soft materials capable of large dimensional changes when subjected to a stimulus. The magnitude and directionality of the stimuli-induced thermomechanical response is associated with the alignment of the LCE. Recent reports detail the preparation of LCEs by additive manufacturing (AM) techniques, predominately using direct ink write printing. Another AM technique, digital light process (DLP) 3D printing, has generated significant interest as it affords LCE free-forms with high fidelity and resolution. However, one challenge of printing LCEs using vat polymerization methods such as DLP is enforcing alignment. Here, we document the preparation of aligned, main-chain LCEs via DLP 3D printing using a 100 mT magnetic field. Systematic examination isolates the contribution of magnetic field strength, alignment time, and build layer thickness on the degree of orientation in 3D printed LCEs. Informed by this fundamental understanding, DLP is used to print complex LCE free-forms with through-thickness variation in both spatial orientations. Further, the hierarchical variation in spatial orientation within LCE free-forms is used to produce objects that exhibit mechanical instabilities upon heating. DLP printing of aligned LCEs opens new opportunities to fabricate stimuli-responsive materials in form factors optimized for functional use in soft robotics and energy absorption.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Growth of Crystallographically Aligned PbSe Films of Controlled Thickness on Amorphous Substrates

Lead selenide (PbSe) has extensively been investigated due to its thermoelectric and photoconductive properties. More recently, predictions of emergent properties have focused synthetic efforts on preparing ultra-smooth layers of crystallographically aligned PbSe layers with a thickness equal to an integer number of monolayers. While rough films are typically formed through Volmer-Weber growth on heated substrates, we report the data presented herein indicates that a crystallographically aligned, ultrathin layer with a defined number of PbSe layers forms on mostly amorphous Mo-Se and V-Se coated Si substrates during nominally room temperature deposition. Since the films are uniform in thickness, the number of PbSe bilayers formed depends on the amount of Pb (or Se) deposited. If the amount of Pb deposited is close to that required for an integral number of unit cells and there is sufficient Se, Laue oscillations are present in the as-deposited samples. The Laue oscillations reflect the quality and uniformity of the crystalline PbSe domains. This study demonstrates that the substrate does not need to be crystalline to form uniform, crystallographically aligned, integer monolayer thick PbSe films. These results suggest that tuning the strength of interactions be-tween substrate and growing film is necessary to form smooth, crystallographically aligned layers. The substrate does not need to be crystalline for these interactions to be strong enough to enable growth of crystallographically aligned films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A natural mechanism for approximate Higgs alignment in the 2HDM

The 2HDM possesses a neutral scalar interaction eigenstate whose tree-level properties coincide with the Standard Model (SM) Higgs boson. In light of the LHC Higgs data which suggests that the observed Higgs boson is SM-like, it follows that the mixing of the SM Higgs interaction eigenstate with the other neutral scalar interaction eigenstates of the 2HDM should be suppressed, corresponding to the so-called Higgs alignment limit. The exact Higgs alignment limit can arise naturally due to a global symmetry of the scalar potential. If this symmetry is softly broken, then the Higgs alignment limit becomes approximate (although still potentially consistent with the current LHC Higgs data). In this paper, we obtain the approximate Higgs alignment suggested by the LHC Higgs data as a consequence of a softly broken global symmetry of the Higgs Lagrangian. However, this can only be accomplished if the Yukawa sector of the theory is extended. We propose an extended 2HDM with vector-like top quark partners, where explicit mass terms in the top sector provide the source of the soft symmetry breaking of a generalized CP symmetry. In this way, we can realize approximate Higgs alignment without a significant fine-tuning of the model parameters. We then explore the implications of the current LHC bounds on vector-like top quark partners for the success of our proposed scenario.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

First measurement of prompt and non-prompt D* + vector meson spin alignment in pp collisions at $\sqrt{s}$ = 13 TeV

This letter reports the first measurement of spin alignment, with respect to the helicity axis, for D* + vector mesons and their charge conjugates from charm-quark hadronisation (prompt) and from beauty meson decays (non-prompt) in hadron collisions. The measurements were performed at midrapidity (|y| < 0.8) as a function of transverse momentum (p T ) in proton–proton (pp) collisions collected by ALICE at the centre-of-mass energy $\sqrt{s}$ = 13 TeV. The diagonal spin density matrix element $ρ$00 of D* + mesons was measured from the angular distribution of the D* + → D 0 (→ K - π + )π + decay products, in the D* + rest frame, with respect to the D* + momentum direction in the pp centre of mass frame. The $ρ$00 value for prompt D* + mesons is consistent with 1/3, which implies no spin alignment. However, for non prompt D* + mesons an evidence of $ρ$00 larger than 1/3 is found. The measured value of the spin density element is $ρ$00 = 0.455±0.022(stat.)±0.035(syst.) in the 5 < p T < 20 GeV/c interval, which is consistent with a Pythia 8 Monte Carlo simulation coupled with the EvtGen package, which implements the helicity conservation in the decay of D* + meson from beauty mesons. In non-central heavy-ion collisions, the spin of the D* + mesons may be globally aligned with the direction of the initial angular momentum and magnetic field. Based on the results for pp collisions reported in this letter it is shown that alignment of non-prompt D* + mesons due to the helicity conservation coupled to the collective anisotropic expansion may mimic the signal of global spin alignment in heavy-ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Long-Range Lamellar Alignment in Diblock Bottlebrush Copolymers via Controlled Oscillatory Shear

A simple strategy is presented to achieve well-ordered nanostructures in microphase-separated diblock bottlebrush copolymers (dbBB) for potential opportunities in nanotechnology that require large grain sizes and directed orientation. The unique architecture and relaxation processes of dbBBs offer a pathway to enhanced dynamic ordering and reorientation over macroscopic scales. Here, controlled shear is used to align lamellar domains. The high molecular mobility of dbBBs in the melt state, as shown by linear and nonlinear viscoelastic characterization, supports this alignment process. When subjected to large-amplitude oscillatory shear at controlled frequency (ω), strain amplitude (γ), and temperature (T shear ), microphase-separated lamellae transition into highly aligned states as determined by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). High throughput synchrotron SAXS is used to rapidly characterize microphase separation and lamellar alignment across the entire bulk sample. Lamellae align parallel to shear planes with an orientation order parameter (S) approaching S = 0.8 over a large cubic volume (V ~ mm 3 ).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Protein remote homology detection and structural alignment using deep learning

Exploiting sequence–structure–function relationships in biotechnology requires improved methods for aligning proteins that have low sequence similarity to previously annotated proteins. We develop two deep learning methods to address this gap, TM-Vec and DeepBLAST. TM-Vec allows searching for structure–structure similarities in large sequence databases. It is trained to accurately predict TM-scores as a metric of structural similarity directly from sequence pairs without the need for intermediate computation or solution of structures. Once structurally similar proteins have been identified, DeepBLAST can structurally align proteins using only sequence information by identifying structurally homologous regions between proteins. It outperforms traditional sequence alignment methods and performs similarly to structure-based alignment methods. We show the merits of TM-Vec and DeepBLAST on a variety of datasets, including better identification of remotely homologous proteins compared with state-of-the-art sequence alignment and structure prediction methods.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Influence of strain and dislocations on GaSb/GaAs quantum dots: From nested to staggered band alignment

We investigate the influence of strain and dislocations on band alignment in GaSb/GaAs quantum dot systems. Composition profiles from cross-sectional scanning tunneling microscopy images are interpolated onto a finite element mesh in order to calculate the distribution of local elastic strain, which is converted to a spatially varying band alignment using deformation potential theory. Our calculations predict that dislocation-induced strain relaxation and charging lead to significant local variations in band alignment. Furthermore, misfit strain induces a transition from a nested (type I) to a staggered (type II) band alignment. Although dislocation-induced strain relaxation prevents the type I to type II transition, electrostatic charging at dislocations induces the staggered band alignment once again.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Spatially programmed alignment and actuation in printed liquid crystal elastomers

Liquid crystal elastomers (LCEs) exhibit reversible shape morphing behavior when cycled above their nematic-to-isotropic transition temperature. During extrusion-based 3D printing, LCE inks are subjected to coupled shear and extensional flows that can be harnessed to spatially control the alignment of their nematic director along prescribed print paths. Here, we combine experiment and modeling to elucidate the effects of ink composition, nozzle geometry, and printing parameters on director alignment. From rheological measurements, we quantify the dimensionless Weissenberg number ( Wi ) for the flow field each ink experiences as a function of printing conditions and demonstrate that Wi is a strong predictor of LCE alignment. We find that director alignment in LCE filaments printed through a tapered nozzle varies radially when Wi < 1, while it is uniform when Wi ≫ 1. Based on COMSOL simulations and in operando X-ray measurements, we show that LCE inks printed through nozzles with an internal hyperbolic geometry exhibit a more uniform director alignment for a given Wi compared to those through tapered nozzles. Concomitantly, the stiffness along the print direction and actuation strain of printed LCEs increases substantially under such conditions. By varying Wi during printing through adjusting the flow rate “on the fly”, LCE architectures with uniform composition, yet locally encoded shape morphing transitions can be realized.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Alignment and dissociation of electronically excited molecular hydrogen with intense laser fields

The dissociation of aligned, electronically excited H 2 (E,F 1 Σ g + ), followed by ionization of the produced H atom, is analyzed via the velocity mapped imaging technique. The dissociation and ionization processes are accomplished, respectively, by a two- and a onephoton absorption from a single 532-nm laser pulse, while the alignment is induced by a separate 1064-nm laser pulse. The velocity of the produced H + photofragments shows a weak perpendicular alignment at low alignment laser field values, evolving to strongly parallel for larger fields. We modeled this alignment behavior with a simple two-state model involving the Stark mixing of the initially-prepared J = 0 with the J = 2 rotational state. This model is able to reproduce all of the observed angular distribution, and permits us to extract from the fit the polarizability anisotropy of H 2 (E,F) electronic state. We determine this value to be (3.7 ± 1.2) x 10 3 a.u. As this value is extremely large in comparison to what one would expect from the pure H 2 (E,F) electronic state, we hypothesize that this value comes from the 1064-nm laser beam mixing nearby electronic states with the initially laser prepared (E,F) state generating a mixed state (EF**) with an extremely large polarizability anisotropy.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Alignment of the ATLAS Inner Detector in Run 2

The performance of the ATLAS Inner Detector alignment has been studied using pp collision data at s√=13TeV collected by the ATLAS experiment during Run 2 (2015–2018) of the Large Hadron Collider (LHC). The goal of the detector alignment is to determine the detector geometry as accurately as possible and correct for time-dependent movements. The Inner Detector alignment is based on the minimization of track-hit residuals in a sequence of hierarchical levels, from global mechanical assembly structures to local sensors. Subsequent levels have increasing numbers of degrees of freedom; in total there are almost 750,000. The alignment determines detector geometry on both short and long timescales, where short timescales describe movements within an LHC fill. The performance and possible track parameter biases originating from systematic detector deformations are evaluated. Momentum biases are studied using resonances decaying to muons or to electrons. The residual sagitta bias and momentum scale bias after alignment are reduced to less than ~0.1 TeV -1 and 0.9×10 -3 , respectively. Impact parameter biases are also evaluated using tracks within jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Determining tolerance requirements for spray-duct alignment in ducted fuel injection

Several ducted fuel injection (DFI) studies have highlighted the importance of accuracy in aligning the duct axis with that of its corresponding spray for optimal effectiveness, as misalignment adversely impacts the method’s performance. The need for accurate alignment could lead to added manufacturing complexity via tighter tolerances. This study systematically explores cases of horizontal, vertical, and rotational misalignment, analyzing their respective effects on DFI performance. Vertical and horizontal misalignments at the duct inlet plane were varied at magnitudes of 6.25%, 12.5%, and 25.0% of the duct diameter, corresponding to 0.125, 0.25, and 0.5 mm, respectively. Rotational misalignments were set at 1°, 2°, and 4°, corresponding to 3.65%, 7.30%, and 14.6%, respectively, of the duct diameter at its inlet plane. The investigation yields spray-duct alignment tolerance limits and highlights the influence of misalignment direction on emissions due to the interactions with swirl and squish inside the combustion chamber. The results indicate that the tolerance limits for the alignment are within 4° and 0.5 mm relative to the geometrically aligned position. If the misalignment exceeds 4°of rotation or 0.5 mm in the horizontal direction, the beneficial effects on soot reduction using this method are no longer observed. The findings contribute to an understanding that can be used to optimize DFI for cleaner and more efficient combustion in compression-ignition engines.

Şener, Ramazan↗
DOE OSTI2022

Joint iterative reconstruction and 3D rigid alignment for X-ray tomography

X-ray tomography is widely used for three-dimensional structure determination in many areas of science, from the millimeter to the nanometer scale. The resolution and quality of the 3D reconstruction is limited by the availability of alignment parameters that correct for the mechanical shifts of the sample or sample stage for the images that constitute a scan. In this paper we describe an algorithm for marker-free, fully automated and accurately aligned and reconstructed X-ray tomography data. Our approach solves the tomographic reconstruction jointly with projection data alignment based on a rigid-body deformation model. We demonstrate the robustness of our method on both synthetic phantom and experimental data and show that our method is highly efficient in recovering relatively large alignment errors without prior knowledge of a low resolution approximation of the 3D structure or a reasonable estimate of alignment parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

New alignment method for remote protein sequences by the direct use of pairwise sequence correlations and substitutions

Understanding protein sequences and how they relate to the functions of proteins is extremely important. One of the most basic operations in bioinformatics is sequence alignment and usually the first things learned from these are which positions are the most conserved and often these are critical parts of the structure, such as enzyme active site residues. In addition, the contact pairs in a protein usually correspond closely to the correlations between residue positions in the multiple sequence alignment, and these usually change in a systematic and coordinated way, if one position changes then the other member of the pair also changes to compensate. In the present work, these correlated pairs are taken as anchor points for a new type of sequence alignment. The main advantage of the method here is its combining the remote homolog detection from our method PROST with pairwise sequence substitutions in the rigorous method from Kleinjung et al. We show a few examples of some resulting sequence alignments, and how they can lead to improvements in alignments for function, even for a disordered protein.

Jia, Kejue↗
DOE OSTI2021

Mechanical and Dielectric Properties of Aligned Electrospun Fibers

This review paper examines the current state-of-the-art in fabrication of aligned fibers via electrospinning techniques and the effects of these techniques on the mechanical and dielectric properties of electrospun fibers. Molecular orientation, system configuration to align fibers, and post-drawing treatment, like hot/cold drawing process, contribute to better specific strength and specific stiffness properties of nanofibers. The authors suggest that these improved, aligned nanofibers, when applied in composites, have better mechanical and dielectric properties for many structural and multifunctional applications, including advanced aerospace applications and energy storage devices. For these applications, most fiber alignment electrospinning research has focused on either mechanical property improvement or dielectric property improvement alone, but not both simultaneously. Relative to many other nanofiber formation techniques, the electrospinning technique exhibits superior nanofiber formation when considering cost and manufacturing complexity for many situations. Even though the dielectric property of pure nanofiber mat may not be of general interest, the analysis of the combined effect of mechanical and dielectric properties is relevant to the present analysis of improved and aligned nanofibers. A plethora of nanofibers, in particular, polyacrylonitrile (PAN) electrospun nanofibers, are discussed for their mechanical and dielectric properties. In addition, other types of electrospun nanofibers are explored for their mechanical and dielectric properties. An exploratory study by the author demonstrates the relationship between mechanical and dielectric properties for specimens obtained from a rotating mandrel horizontal setup.

77 NANOSCIENCE AND NANOTECHNOLOGY↗