SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We provide an assessment of the ICESat altimeter for studying the Arctic Ocean and examine the magnitude of the large- and small-scale expressions of geophysical processes embedded in the elevation profiles. This analysis includes data from six surveys. ...
The elevation of the surface of the ocean and freshwater bodies on land holds key information on many important processes of the Earth System. The elevation of the ocean surface, called ocean surface topography, has been measured by conventional nadirlooking radar altimeter for the past two decades. The data collected have been used for the study of large-scale circulation and sea level change. However, the spatial resolution of the observations has limited the study to scales larger than about 200 km, leaving the smaller scales containing substantial kinetic energy of ocean circulation that is responsible for the flux of heat, dissolved gas and nutrients between the upper and the deep ocean. This flux is important to the understanding of the ocean's role in regulatingfuture climate change.The elevation of the water bodies on land is a key parameter required for the computation of storage and discharge of freshwater in rivers, lakes, and wetlands. Globally, the spatial and temporal variability of water storage and discharge is poorly known due to the lack of well-sampled observations. In situ networks measuring river flows are declining worldwide due to economic and political reasons. Conventional altimeter observations suffers from the complexity of multiple peaks caused by the reflections from water, vegetation canopy and rough topography, resulting in much less valid data over land than over the ocean. Another major limitation is the large inter track distance preventing good coverage of rivers and other water bodies.This document provides descriptions of a new measurement technique using radar interferometry to obtain wide-swath measurement of water elevation at high resolution over both the ocean and land. Making this type of measurement, which addresses the shortcomings of conventional altimetry in both oceanographic and hydrologic applications, is the objective of a mission concept called Surface Water and Ocean Topography (SWOT), which was recommended by the National Research Council's first decadal survey of NASA's Earth science program. This document provides wide-ranging examples of research opportunities in oceanography and land hydrology that would be enabled by the new type of measurement. Additional applications in many other branches of Earth System science ranging from ocean bathymetry to sea ice dynamics are also discussed. Many of the technical issues in making the measurement are discussed as well. Also presented is a preliminary design of the SWOT Mission concept, which is being jointly developed by NASA and CNES, with contributions from the Canadian Space Agency.
The Cyclone Global Navigation Satellite System (CYGNSS) mission was designed to study hurricane intensification by measuring wind speeds in tropical cyclones. However, the delay-Doppler maps (DDM) that are produced can be used to estimate the sea surface height (SSH) at the specular reflection point on the ocean surface. Proofof-concept studies that DDMs are suitable to solve for SSH have been recently reported (Clarizia et al., 2016; Mashburn et al., 2018), based on data acquired by the demonstration satellite experiment Tech Demo Sat - 1 (TDS-1) carrying a GNSS-R receiver similar to the ones onboard CYGNSS. Although the precision of each 1sec averaged SSH is considerably lower than that of the existing satellite altimeters, by virtue of the dense coverage and frequent revisit time exhibited by the constellation of 8 microsats, the error may be smoothed down considerably by optimal interpolation (Li et al., 2016). Hence the CYGNSS dataset presents a potential opportunity to sample the tropical oceans, and investigate the sensitivity of the SSH measurements to mesoscale eddies. Our objective is to analyze the CYGNSS data and test a suite of retrieval algorithms, including that of Mashburn et al., 2018 to obtain SSH, to understand the error sources and possible corrections when available. Because of the limited antenna gain of the CYGNSS instrument, the power SNR for general wind conditions is expected to be too low to accurately track the reflection point contribution, resulting in altimetry errors of the order of several meters. Other significant error sources are the CYGNSS satellites orbit knowledge, the ionosphere, the troposphere, the mean sea surface and the tides; some of these errors can be reduced by using models. The corrected SSH data will be assimilated into the ROMS high-resolution ocean model to investigate their ability to reproduce mesoscale eddies in the tropical oceans.
Explore the source record for details and available documents.
The computation of a precise orbit reference is a fundamental component of the altimetric measurement. Since the dawn of the modern altimeter age, orbit accuracy has been determined by the quality of the GPS, SLR, and DORIS tracking systems, the fidelity of the measurement and force models, and the choice of parameterization for the orbit solutions, and whether a dynamic or a reduced-dynamic strategy is used to calculate the orbits. At the start of the TOPEX mission, the inaccuracies in the modeling of static gravity, dynamic ocean tides, and the nonconservative forces dominated the orbit error budget. Much of the error due to dynamic mismodeling can be compensated by reduced-dynamic tracking techniques depending on the measurement system strength. In the last decade, the launch of the GRACE mission has eliminated the static gravity field as a concern, and the background force models and the terrestrial reference frame have been systematically refined. GPS systems have realized many improvements, including better modeling of the forces on the GPS spacecraft, large increases in the ground tracking network, and improved modeling of the GPS measurements. DORIS systems have achieved improvements through the use of new antennae, more stable monumentation, and of satellite receivers that can track multiple beacons, and as well as through improved modeling of the nonconservative forces. Many of these improvements have been applied in the new reprocessed time series of orbits produced for the ERS satellites, Envisat, TOPEX/Poseidon and the Jason satellites, and as well as for the most recent Cryosat-2 and HY2A. We now face the challenge of maintaining a stable orbit reference for these altimetric satellites. Changes in the time-variable gravity field of the Earth and how these are modelled have been shown to affect the orbit evolution, and the calibration of the altimetric data with tide gauges. The accuracy of the reference frame realizations, and their projection into the future remains a source of error. Other sources of omission error include the geocenter for which no consensus model is as of yet applied. Although progress has been made in nonconservative force modeling through the use of detailed satellite-specific models, radiation pressure modeling, and atmospheric density modeling remain a potential source of orbit error. The longer term influence of variations in the solar and terrestrial radiation fields over annual and solar cycles remains principally untested. Also the long term variation in optical and thermal properties of the space vehicle surfaces would contribute to biases in the orbital frame if ignored. We review the status of altimetric precision orbit determination as exemplified by the recent computations undertaken by the different analysis centers for ERS, Envisat, TOPEX/Poseidon, Jason, Cryosat2 and HY2A, and we provide a perspective on the challenges for future missions such as the Jason-3, SENTINEL-3 and SWOT.
The state of tidal research and the relationship of tides to altimeter data was discussed. It was decided that tides should be recognized as a separate objective for altimetric research. An altimetric satellite such as TOPEX which is designed for separation of tidal signals in conjunction with surface measurements can significantly improve knowledge of the deep sea tide. Information gained in this way will be directly applicable to all other altimetric satellites.
The accuracy of satellite altimetric measurements of sea level is limited in part by the influence by ocean waves on the altimeter signal reflected from the sea surface. This error, termed the sea-state bias, is poorly known; yet, for such altimetric satellite missions as Topex/Poseidon, it is the largest source of error exclusive of those resulting from calculation of the satellite's ephemeris. Previous observations of sea-state bias have had a large, apparently random scatter, in the range of 1-5 percent of significant wave height; and the observations are not consistent with theoretical calculations of the bias. Further theoretical and experimental studies will be required for understanding the error with an accuracy required by future altimetric satellite missions.
Gravity accelerations estimated from satellite altimetric mean sea surfaces (Seasat and Geos-3) are compared to ship gravity measurements. Ship gravity are closer to an estimate based on least squares collocation, orbit perturbations, altimetry and terrestrial gravity than to an estimate based on Fourier transforms, orbit perturbations and altimetry only. Both altimetric estimates yield a smoothed picture of the geostrophic component of sea surface currents in the North Atlantic when gravity acceleration data from only nine cruises are subtracted from the altimetric gravity.
Video-based altimetric and obstruction detection systems for aircraft have been partially developed. The hardware of a system of this type includes a downward-looking video camera, a video digitizer, a Global Positioning System receiver or other means of measuring the aircraft velocity relative to the ground, a gyroscope based or other attitude-determination subsystem, and a computer running altimetric and/or obstruction-detection software. From the digitized video data, the altimetric software computes the pixel velocity in an appropriate part of the video image and the corresponding angular relative motion of the ground within the field of view of the camera. Then by use of trigonometric relationships among the aircraft velocity, the attitude of the camera, the angular relative motion, and the altitude, the software computes the altitude. The obstruction-detection software performs somewhat similar calculations as part of a larger task in which it uses the pixel velocity data from the entire video image to compute a depth map, which can be correlated with a terrain map, showing locations of potential obstructions. The depth map can be used as real-time hazard display and/or to update an obstruction database.
Exceeding all expectations of measurement precision and accuracy, the US/France TOPEX/Poseidon satellite mission is now in its 5th year. Returning more than 98 percent of the altimetric data, the measured global geocentric height of the sea surface has provided unprecedented opportunities to address a host of scientific problems ranging from the dynamics of ocean circulation to the distribution of internal tidal energy. Scientific highlights of this longest-running altimetric satellite mission include improvements in our understanding of the dynamics and thermodynamics of the large-scale ocean variability, such as, the properties of planetary waves; the energetics of basin-wide gyres; the heat budget of the ocean; and the ocean's response to wind forcing. For the first time, oceanographers have quantitative descriptions of a dynamic variable of the physical state of the global oceans available in near-real-time.
The Air Force Geophysics Laboratory computer program SARRA (Short Arc Reduction of Radar Altimetry) has been used for geoid determination with altimetric observations from the GEOS-3 satellite. An important feature of SARRA is the simultaneous recovery of the orbit parameters and the surface coefficients as defined by covariance function weights. Orbits good to approximately 20 meters are adequate for precise geoid determinations by virtue of the orbital adjustment in the reductions. Altimetric data over a portion of the North Atlantic Ocean have been processed to derive the regional geoid and gravity field. Analyses of altimeter residuals resulting from the short arc adjustment show that the residuals can be used to define the neglected higher order geoidal undulations with high fidelity and continuity.
The nature and improvement in satellite orbit determination when precise altimetric height data are used in combination with conventional tracking data was determined. A digital orbit determination program was developed that could singly or jointly use laser ranging, C-band ranging, Doppler range difference, and altimetric height data. Two intervals were selected and used in a preliminary evaluation of the altimeter data. With the data available, it was possible to determine the semimajor axis and eccentricity to within several kilometers, in addition to determining an altimeter height bias. When used jointly with a limited amount of either C-band or laser range data, it was shown that altimeter data can improve the orbit solution.
The Radar Mapper Experiment, carried aboard the Pioneer Venus Orbiter spacecraft, is designed to obtain a near-global picture of the topography, meter-scale surface slopes and reflectivity of Venus. Constraints imposed by the choice of orbit limit radar coverage to a latitude band lying between 74 deg N and 61 deg S completely around the planet. In addition to the altimetry objectives, the experiment seeks an image of the radar scattering properties of the surface at oblique incidence. Sensitivity limits the imaged region to a band around the planet lying between 45 deg N and 10 deg S. Altimetric error is less than 200 m; altimetric surface 'footprint' size varies from about 10 km in diameter at a spacecraft altitude of 200 km, to 50 km at a maximum altitude of 4700 km. Imaging varies from 20 to 40 km, depending on spacecraft altitude.
Progress on the applications of satellite altimetry from SEASAT and Geos-3 to the study of oceanic mesoscale variability and general circulation is reviewed. The major conclusion for the applications to mesoscale variability is that an optimally designed altimetric mission with a lifetime of several years will improve our knowledge of the global mesoscale variability to an extent unattainable by any other practical means. The proposed Topex mission will allow one to view the global oceanic variability in such a wide range of periods and wavelengths: from 20 days to 3 to 5 years; from 50 to 10,000 km. However, the goal of determining the general circulation cannot be achieved by a single altimetric mission, because a highly accurate geoid needs to be determined independently. The scenario of the combination of Topex with Gravsat, a gravity mission that will give accurate geoid information, will allow the global general circulation to be determined at scales as small as 100 km. Areas of research needing to be performed with existing altimeter data are also discussed.
A new method is developed for studying large-scale temporal variability of ocean currents from satellite altimetric sea level measurements at intersections (crossovers) of ascending and descending orbit ground tracks. Using this method, sea level time series can be constructed from crossover sea level differences in small sample areas where altimetric crossovers are clustered. The method is applied to Seasat altimeter data to study the temporal evolution of the Antarctic Circumpolar Current (ACC) over the 3-month Seasat mission (July-October 1978). The results reveal a generally eastward acceleration of the ACC around the Southern Ocean with meridional disturbances which appear to be associated with bottom topographic features. This is the first direct observational evidence for large-scale coherence in the temporal variability of the ACC. It demonstrates the great potential of satellite altimetry for synoptic observation of temporal variability of the world ocean circulation.
The U.S. National Aeronautics and Space Administration (NASA) and the French Centre National d'Etudes Spatiales (CNES) propose to conduct a Topex/Poseidon Mission for studying the global ocean circulation from space. The mission will use the techniques of satellite altimetry to make precise and accurate measurements of sea level for several years. The measurements will then be used by Principal Investigators (selected by NASA and CNES) and by the wider oceanographic community working closely with large international programs for observing the Earth, on studies leading to an improved understanding of global ocean dynamics and the interaction of the ocean with other processes influencing life on Earth. The major elements of the mission include a satellite carrrying an altimetric system for measuring the height of the satellite above the sea surface; a precision orbit determination system for referring the altimetric measurements to geodetic coordinates; a data analysis and distribution system for processing the satellite data, verifying their accuracy, and making them available to the scientific community; and a principal investigator program for scientific studies based on the satellite observations. This document describes the satellite, its sensors, its orbit, the data analysis system, and plans for verifying and distributing the data. It then discusses the expected accuracy of the satellite's measurements and their usefulness to oceanographic, geophysical, and other scientific studies. Finally, it outlines the relationship of the Topex/Poseidon mission to other large programs, including the World Climate Research Program, the U.S. Navy's Remote Ocean Sensing System satellite program and the European Space Agency's ERS-1 satellite program.