Search NASA⌕ Search

SEARCH · Search NASA

Results for “ambipolar diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Charge collected by diffusion from an ion track under mixed boundary conditions

Charge-carrier diffusion from an ion track in a silicon substrate at least a few hundred microns thick is analyzed. The substrate upper surface is treated as reflective except for a small section, intended to represent a reverse-biased junction, which is treated as a sink. Total charge collected by the sink is calculated by assuming transport to be governed by an ambipolar diffusion equation with temporally constant and spatially uniform carrier lifetime and diffusion coefficient. Present results apply to a normally incident track but could easily be generalized to arbitrary track direction. The collected charge is found to depend on track length and on the electrostatic capacitance, rather than the area, of the sink. Theoretical predictions are compared to the results of a numerical simulation called the Poisson and Continuity Equation Solver (PISCES) for three cases and are found to agree within a factor of two in the worst case.

Edmonds, Larry D.↗
DOE OSTI2026

Charge Carrier and Spin Diffusion in a Polycrystalline and Single Crystal Lead Halide Perovskite Semiconductor

The directed movement of spin-bearing excitations in semiconductors can enable many potential schemes for spintronic applications. Understanding the mechanism of spin motion, as opposed to charge carrier or exciton motion, may require specialized techniques and sample conditions. Here we employ the noncontact and time-resolved technique of light-induced transient grating spectroscopy (LITG) to measure both carrier and spin motion in a perovskite semiconductor with varying crystallinity. The carrier motion aligns with expectations from past studies undertaken at low fluence, revealing an ambipolar diffusion coefficient on the order of 1 cm 2 /sec and diffusion length of roughly 1.5 μm for single crystals that is strongly attenuated as crystallite size decreases. The spin diffusion is measured with cross-polarized excitation beams and uncovers an intensity-dependent coefficient rising above 100 cm 2 /sec. The fast room-temperature spin relaxation limits the spin diffusion length, but the remarkable speedup of spin over carrier diffusion suggests a mechanism involving a combination of exchange-mediated and doping effects that enhance spin transport.

14 SOLAR ENERGY↗
NASA NTRS2009

A theoretical analysis of steady-state charge collection in simple diodes under high-injection conditions

A previous rigorous mathematical analysis of drift-diffusion equations was used to investigate collected charge in a simple reverse-biased p-n junction diode exposed to an ionization source that liberates carriers (electron-hole pairs) in a quasi-neutral region within the diode. Each of two simple models was found to agree with the more rigorous analysis when carrier liberation is sufficiently intense. One is the sensitive volume (SV) model, and the other was called “ambipolar diffusion with a cutoff” (ADC). The earlier rigorous analysis was worked out in detail only for a localized source, i.e., a point source of carrier liberation, so it was able to validate the applicability of each simple model only for that case. The present paper treats an arbitrary spatial distribution of carrier generation and concludes that the ADC model remains valid for this more general case, but the SV model does

Edmonds, Larry D.↗
DOE OSTI2020

Learning compact physics‐aware delayed photocurrent models using dynamic mode decomposition

Abstract Radiation‐induced photocurrent in semiconductor devices can be simulated using complex physics‐based models, which are accurate, but computationally expensive. This presents a challenge for implementing device characteristics in high‐level circuit simulations where it is computationally infeasible to evaluate detailed models for multiple individual circuit elements. In this work we demonstrate a procedure for learning compact delayed photocurrent models that are efficient enough to implement in large‐scale circuit simulations, but remain faithful to the underlying physics. Our approach utilizes dynamic mode decomposition (DMD), a system identification technique for learning reduced‐order discrete‐time dynamical systems from time series data based on singular value decomposition. To obtain physics‐aware device models, we simulate the excess carrier density induced by radiation pulses by solving numerically the ambipolar diffusion equation, then use the simulated internal state as training data for the DMD algorithm. Our results show that the significantly reduced‐order delayed photocurrent models obtained via this method accurately approximate the dynamics of the internal excess carrier density—which can be used to calculate the induced current at the device boundaries—while remaining compact enough to incorporate into larger circuit simulations.

Hanson, Joshua↗
DOE OSTI2024

Dynamics of carrier injection through V-defects in long wavelength GaN LEDs

The efficiency of high-power operation of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on the realization of uniform hole distribution between the QWs. In long wavelength InGaN/GaN QW LEDs, the thermionic interwell hole transport is hindered by high GaN barriers. However, in polar LED structures, these barriers may be circumvented by the lateral hole injection via semipolar {$10\bar{1}1$} QWs that form on the facets of V-defects. The efficiency of such carrier transfer depends on the transport time since transport in the semipolar QWs is competed by recombination. In this work, we study the carrier transfer from the semipolar to polar QWs by time-resolved photoluminescence in long wavelength (green to red) LEDs. We find that the carrier transfer through the semipolar QWs is fast, a few tens of picoseconds with the estimated room temperature ambipolar diffusion coefficient of ∼5.5 cm 2 /s. With diffusion much faster than recombination, the hole transport from the p-side of the structure to the polar QWs should proceed without a substantial loss, contributing to the high efficiency of long wavelength GaN LEDs.

Crystallographic defects↗
DOE OSTI2021

Striations in moderate pressure dc driven nitrogen glow discharge

Plasma stratification has been studied for more than a century. Despite the many experimental studies reported on this topic, theoretical analyses and numerical modeling of this phenomenon have been mostly limited to rare gases. In this work, a one-dimensional fluid model with detailed kinetics of electrons and vibrationally excited molecules is employed to simulate moderate-pressure (i.e. a few Torrs) dc discharge in nitrogen in a 15.5 cm long tube of radius 0.55 cm. The model also considers ambipolar diffusion to account for the radial loss of ions and electrons to the wall. The proposed model predicts self-excited standing striations in nitrogen for a range of discharge currents. The impact of electron transport parameters and reaction rates obtained from a solution of local two-term and a multi-term Boltzmann equation on the predictions are assessed. In-depth kinetic analysis indicates that the striations result from the undulations in electron temperature caused due to the interaction between ionization and vibrational reactions. Furthermore, the vibrationally excited molecules associated with the lower energy levels are found to influence nitrogen plasma stratification and the striation pattern strongly. A balance between ionization processes and electron energy transport allows the formation of the observed standing striations. Simulations were conducted for a range of discharge current densities from ~0.018 to 0.080 mA cm –2 , for an operating pressure of 0.7 Torr. Parametric studies show that the striation length decreases with increasing discharge current. Furthermore, the predictions from the model are compared against experimental measurements and are found to agree favorably.

42 ENGINEERING↗
DOE OSTI2023

Particle-in-cell modeling of electron beam generated plasma

Plasmas generated using energetic electron beams are well known for their low electron temperature (T e ) and plasma potential, which makes them attractive for atomic-precision plasma processing applications such as atomic layer etch and deposition. A 2-dimensional particle-in-cell model for an electron beam-generated plasma in argon confined by a constant applied magnetic field is described here in this article. Plasma production primarily occurs in the path of the beam electrons in the center of the chamber. The resulting plasma spreads out in the chamber through non-ambipolar diffusion with a short-circuiting effect allowing unequal electron and ion fluxes to different regions of the bounding conductive chamber walls. The cross-field transport of the electrons (and thus the steady-state characteristics of the plasma) are strongly impacted by the magnetic field. T e is anisotropic in the electron beam region, but low and isotropic away from the plasma production zone. The plasma density increases and the plasma becomes more confined near the region of production when the magnetic field strengthens. The magnetic field reduces both electron physical and energy transport perpendicular to the magnetic field. T e is uniform along the magnetic field lines and slowly decreases perpendicular to it. Electrons are less energetic in the sheath regions where the sheath electric field repels and confines the low-energy electrons from the bulk plasma. Even though electron and ion densities are similar in the bulk plasma due to quasi-neutrality, electron and ion fluxes on the grounded chamber walls are unequal at most locations. Electron confinement by the magnetic field weakens with increasing pressure, and the plasma spread out farther from the electron beam region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Magnetorotational instability in a swirling partially ionized gas

ABSTRACT The magnetorotational instability (MRI) has been proposed as the method of angular momentum transport that enables accretion in astrophysical discs. However, for weakly ionized discs, such as protoplanetary discs, it remains unclear whether the combined non-ideal magnetohydrodynamic (MHD) effects of Ohmic resistivity, ambipolar diffusion, and the Hall effect make these discs MRI stable. While much effort has been made to simulate non-ideal MHD MRI, these simulations make simplifying assumptions and are not always in agreement with each other. Furthermore, it is difficult to directly observe the MRI astrophysically because it occurs on small scales. Here, we propose the concept of a swirling gas experiment of weakly ionized argon gas between two concentric cylinders threaded with an axial magnetic field that can be used to study non-ideal MHD MRI. For our proposed experiment, we derive the hydrodynamic equilibrium flow and a dispersion relation for MRI that includes the three non-ideal effects. We solve this dispersion relation numerically for the parameters of our proposed experiment. We find it should be possible to produce a non-ideal MRI in such an experiment because of the Hall effect, which increases the MRI growth rate when the vertical magnetic field is anti-aligned with the rotation axis. As a proof of concept, we also present experimental results for a hydrodynamic flow in an unmagnetized prototype. We find that our prototype has a small, but non-negligible, α-parameter that could serve as a baseline for comparison to our proposed magnetized experiment, which could be subject to additional turbulence from the MRI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Revealing the Drag Instability in One-fluid Nonideal Magnetohydrodynamic Simulations of a 1D Isothermal C-shock

C-type shocks are believed to be ubiquitous in turbulent molecular clouds thanks to ambipolar diffusion. We investigate whether the drag instability in 1D isothermal C-shocks, inferred from the local linear theory of Gu & Chen, can appear in nonideal magnetohydrodynamic simulations. Two C-shock models (with narrow and broad steady-state shock widths) are considered to represent the typical environment of star-forming clouds. The ionization-recombination equilibrium is adopted for the one-fluid approach. In the 1D simulation, the inflow gas is continuously perturbed by a sinusoidal density fluctuation with a constant frequency. The perturbations clearly grow after entering the C-shock region until they start being damped at the transition to the post-shock region. We show that the profiles of a predominant Fourier mode extracted locally from the simulated growing perturbation match those of the growing mode derived from the linear analysis. Moreover, the local growth rate and wave frequency derived from the predominant mode generally agree with those from the linear theory. Therefore, we confirm the presence of the drag instability in simulated 1D isothermal C-shocks. We also explore the nonlinear behavior of the instability by imposing larger-amplitude perturbations to the simulation. We find that the drag instability is subject to wave steepening, leading to saturated perturbation growth. Issues concerning local analysis, nonlinear effects, one-fluid approach, and astrophysical applications are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1970

The daytime upper ionosphere of Venus

Venus daytime upper ionosphere observations by mariner 5 in terms of ionization sources and sinks, ambipolar diffusion and model atmospheres

Whitten, R. C.↗
NASA NTRS1972

Oxygen and hydrogen ion densities above Millstone Hill.

Measurements of the vertical flux of oxygen ions, when combined with simultaneous measurements of electron density and of electron and ion temperatures, present a unique opportunity to examine conditions in the topside ionosphere. The measured fluxes and densities may be used directly to evaluate terms in the O+ continuity equation without requiring any assumptions to be made about neutral winds, electric fields, or the ambipolar diffusion coefficient. From observations at Millstone Hill we have, in this way, derived the rate of loss of O+ in the charge-exchange reaction with hydrogen, the rate of photoionization of atomic oxygen, and the rate of loss of O+ in reactions with N2 and O2. In combination with laboratory and theoretical results, these rates can be interpreted to yield number densities of the corresponding neutral species. When the measured fluxes are examined for consistency with measured density gradients and temperature profiles, we find clear evidence of wind-induced or electrodynamic vertical drifts larger than 60 m/sec.

Schunk, R. W.↗
NASA NTRS1976

The electron Boltzmann equation in a plasma generated by fission fragments

A Boltzmann equation formulation is presented for the determination of the electron distribution function in a plasma generated by fission fragments. The formulation takes into consideration ambipolar diffusion, elastic and inelastic collisions, recombination and ionization, and allows for the fact that the primary electrons are not monoenergetic. Calculations for He in a tube coated with fissionable material show that, over a wide pressure and neutron flux range, the distribution function is non-Maxwellian, but the electrons are essentially thermal. Moreover, about a third of the energy of the primary electrons is transferred into the inelastic levels of He. This fraction of energy transfer is almost independent of pressure and neutron flux but increases sharply in the presence of a sustainer electric field.

Hassan, H. A.↗
NASA NTRS1976

Electron distribution function in a plasma generated by fission fragments

A Boltzmann equation formulation is presented for the determination of the electron distribution function in a plasma generated by fission fragments. The formulation takes into consideration ambipolar diffusion, elastic and inelastic collisions, recombination and ionization, and allows for the fact that the primary electrons are not monoenergetic. Calculations for He in a tube coated with fissionable material shows that, over a wide pressure and neutron flux range, the distribution function is non-Maxwellian, but the electrons are essentially thermal. Moreover, about a third of the energy of the primary electrons is transferred into the inelastic levels of He. This fraction of energy transfer is almost independent of pressure and neutron flux.

Hassan, H. A.↗
NASA NTRS1979

Silicon solar cell fabrication technology

The laser cell scanner was used to characterize a number of solar cells made in various materials. An electron beam-induced current (EBIC) study was performed using a stereoscan scanning electron microscope. Planar p-n junctions were analyzed. A theory for the EBIC based on the analytical solution of the ambipolar diffusion equation under the influence of electron beam excitation parameter z (which is related to beam penetration), the junction depth Z sub j, the beam current and the surface recombination, was formulated and tested. The effect of a grain boundary was studied.

Stafsudd, O. M.↗
NASA NTRS1978

Magnetic field in the primitive solar nebula

Carbonaceous chondrites have apparently been magnetized in their early history in magnetic fields with intensities of 0.1 to 10 G, but the origin of the magnetizing field has remained obscured. It is suggested that the magnetic field recorded in the remanence of carbonaceous chondrites may have been produced by a self-excited hydromagnetic dynamo in the gaseous preplanetary nebula from which the solar system is thought to have formed. Recently computed models for the evolution of the preplanetary nebula, consisting of turbulent and differentially rotating gaseous disks with characteristic radial scales of several AU, are used to demonstrate the feasibility of this hypothesis. The maximum field intensity that might be realized by the dynamo production process is estimated to be as high as 1 to 10 G, taking into account two dynamical mechanisms that limit the strength of the field (the Coriolis force and ambipolar diffusion).

Levy, E. H.↗