A Low-Pressure Reactor Design for Solar Thermochemical Ammonia Production.
Abstract not provided.
Gao, Xiang↗
SEARCH · Search NASA
Results for “ammonia production”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Plasma-Catalysis for Ammonia Production
Explore the source record for details and available documents.
Giles, Matthew↗
Preconceptual Designs of Coupled Power Delivery between a 4-Loop PWR and 100-500 MWe HTSE Plants
This study develops a preconceptual design for the integration between a large-scale high-temperature electrolysis facility and a NPP. Two hydrogen facility sizes are considered: 100 MWnom and 500 MWnom. Both steam supply designs use cold reheat steam extraction as a heat source. A reboiler inside the protected area of the power plant transfers steam heat to the demineralized water supply for the hydrogen plant. After the heat transfer, the extracted steam condenses and returns to the condenser while the process steam routes out of the protected area to the electrolyzers. Electrical power is tapped off from the high voltage side of the GSU transformer, where it is then transported via a 345-kV transmission line to the hydrogen facility. Circuit breakers and disconnects are located at both ends of the transmission line. Step down transformers and miscellaneous switchgear/buses are located at the end of the transmission line inside the HTEF boundary. Control capabilities for the steam interfacing equipment and electrical dispatch are accessible from the Main Control Room, and protective relays for the transmission line are located inside the Relay Room. Computer modeling was performed for the thermal and electrical designs. PEPSE analysis provided the steady-state parameters for thermal extraction from the turbine cycle. These parameters were used to inform transients and size equipment in combination with Applied Flow Technology (AFT) Arrow and AFT Fathom modeling for steam and water piping, respectively. Electrical transients were analyzed using PSCAD. An ETAP model was used to evaluate power flow and short circuit, which enabled the sizing of transformers and protective equipment. A cost estimate was developed for both integration designs when considering plant separation distances of 250 m and 500 m. From these estimates, the modifications for thermal and electrical interfacing of a first-of-a-kind nuclear-integrated hydrogen facility are anticipated to cost between $60–250/kWnom., where the subscript “nom” refers to the nominal size of the hydrogen plant. On a thermal power basis, the thermal power has a cost of approximately $8/MWth for a 500 MWnom high temperature electrolysis plant located 500 m distant from the NPP. That value decreases to approximately $7.5/MWth for a 250 m separation distance between the hydrogen plant and the NPP. This value is lower than previous estimates of the cost of heat extracted from NPPs primarily because in this work the steam is extracted from cold reheat instead of the main steam line, which reduces the cost of the dispatched steam by approximately $3.5/MWth. Nuclear steam extraction can provide a profit avenue for many plants and is not restricted to hydrogen production. Ammonia production, oil refining, and paper production, among other industrial processes all require thermal energy, which can be provided by NPPs. Future work should look further at the details of thermal extraction for a variety of use cases. This can include increased levels of extraction and multiple simultaneous users. Additionally, site-specific studies should be performed to develop industry experience and improve cost accuracy.
08 HYDROGEN↗
Methods for co-producing hydrocarbon products and ammonia
A method of a hydrocarbon product and ammonia comprises introducing C 2 H 6 to a positive electrode of an electrochemical cell comprising the positive electrode, a negative electrode, and a proton-conducting membrane between the positive electrode and the negative electrode. The proton-conducting membrane comprising an electrolyte material having an ionic conductivity greater than or equal to about 10 −2 S/cm at one or more temperatures within a range of from about 150° C. to about 600° C. N 2 is introduced to the negative electrode of the electrochemical cell. A potential difference is applied between the positive electrode and the negative electrode of the electrochemical cell. A system for co-producing higher hydrocarbons and NH3, and an electrochemical cell are also described.
Ding, Dong↗
Recent Progress in Electrochemical Nitrogen Reduction on Transition Metal Nitrides
Distributed electrochemical nitrogen reduction reaction (ENRR) powered by renewable energy for the on-site production of ammonia is an attractive alternative to the industrial Haber–Bosch process, which is responsible for roughly 2 % of global energy consumption. Here, in this Review, we summarize recent progress in the ENRR catalyzed by transition metal nitrides (TMNs). The unique electronic structures of TMNs make them promising ENRR catalysts for active and selective ammonia production, which have been predicted theoretically and demonstrated experimentally. Reaction pathways and deactivation mechanisms of the ENRR on different TMNs are surveyed, and current understanding of structure-activity relations is discussed. To develop highly active, selective, and stable TMN catalysts for industrial-scale ENRR, membrane electrode assembly configuration is recommended in catalyst evaluation. Furthermore, we highlight the importance of developing mechanistic understanding on ENRR with different operando spectroscopic techniques.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NO Reduction with CO on Low‐loaded Platinum‐group Metals (Rh, Ru, Pd, Pt, and Ir) Atomically Dispersed on Ceria
Abstract Low‐loaded platinum‐group single‐atom catalysts on CeO 2 (M 1 /CeO 2 ) were synthesized via high‐temperature atom trapping (AT) and tested for the NO+CO reaction under dry and wet conditions. The activity of these catalysts for NO+CO reaction follows the order Rh>Pd≈Ru>Pt>Ir. For Rh, Ru, and Pd single‐atom catalysts, the N 2 O byproduct is formed but not clearly observed in Ir and Pt cases, which may result from the higher reaction temperature (>200 °C) required for Pt and Ir catalysts. The presence of water can promote the activity of these M 1 /CeO 2 catalysts for the NO+CO reaction. Under wet conditions, significant NH 3 formation occurred during the reaction, which is due to the co‐existence of water‐gas‐shift reaction on these catalysts. Compared with Pt, Pd and Ir, the Rh and Ru single‐atom catalysts show higher selectivity to NH 3 species, resulting from the hydride species on the surface. Among all tested catalysts, Ru 1 /CeO 2 shows the highest production of ammonia and highest CO conversion due to excellent water‐gas‐shift activity, whereas Pd 1 /CeO 2 shows lowest ammonia production. Rh 1 /CeO 2 shows the best low temperature NO reduction activity among all tested catalysts.
Tian, Jinshu↗
Understanding the cold plasma synthesis of ammonia with model metal catalysts through plasma diagnostics (Final Report)
The industrial synthesis of ammonia, which amounts to over 200 million tons annually, is the most energy-intensive chemical process. Therefore, there is a critical need and increased interest in exploring less energetic routes to produce ammonia. Not only does ammonia have a direct impact on the food market, but also it has the potential as a fuel and hydrogen carrier. Recently, plasma catalysis has emerged as a promising alternative for synthesizing ammonia at mild (pressure, temperature and power) conditions. The key to this catalytic process is the synergy between the plasma and the catalyst, where the non-equilibrium plasma allows the generation of excited species, which recombine at the catalyst surface to form ammonia. However, our current understanding of this process is in its infancy. In this respect, model metals are ideal candidates for gaining a basic understanding of this reaction. Moreover, a major roadblock to rationally designing novel effective catalysts for plasma-assisted ammonia production is the need for fundamental aspects of this process. Through a comprehensive plan that integrates model metals as catalysts and world-class diagnostics, the proposed work aims to provide fundamental knowledge about the nature of reactive processes occurring during plasma-assisted catalysis and to demonstrate the selective production of ammonia, catalyzed by employing selected metals under non-thermal plasma conditions. Toward this goal, the central thrust of this proposal was to demonstrate that the synergy between plasma and rationally selected model metals will boost ammonia yields during plasma-assisted ammonia synthesis by delaying hydrogen recombination. Specifically, we aimed to (1) understand the formation and role of gas-phase active species such as NH, N 2 , N 2 + and Ha during the plasma-enhanced synthesis of ammonia through OES and FTIRAS using different reaction configurations: a) only plasma (non-packed DBD reactor) and b) packed DBD reactor with metal nanoparticles. This proposal was awarded/recommended with a run time on the PCRF facility FY20.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Sustainable production of ammonia fertilizers from biomass
Nitrogen is the most limiting plant nutrient. Inexpensive natural gas has substantially reduced costs of ammonia fertilizer for intensive agriculture in the developed world, but its excessive use negatively impacts downstream ecosystems. By contrast, the availability of ammonia fertilizer is a major economic bottleneck for agriculture in developing countries. A dedicated lignocellulosic biomass crop could supply sufficient substrate to generate optimal nitrogen fertilizer on less than 5% of a grower’s food crop acreage. However, reimagining ammonia generation using biomass could significantly enhance sustainable agricultural productivity in developing countries when combined with emerging catalytic technologies.
09 BIOMASS FUELS↗
The sugar model: catalysis by amines and amino acid products
Ammonia and amines (including amino acids) were shown to catalyze the formation of sugars from formaldehyde and glycolaldehyde, and the subsequent conversion of sugars to carbonylcontaining products under the conditions studied (pH 5.5 and 50 degrees C). Sterically unhindered primary amines were better catalysts than ammonia, secondary amines, and sterically hindered primary amines (i.e. alpha-aminoisobutyric acid). Reactions catalyzed by primary amines initially consumed formaldehyde and glycolaldehyde about 15-20 times faster than an uncatalyzed control reaction. The amine-catalyzed reactions yielded aldotriose (glyceraldehyde), ketotriose (dihydroxyacetone), aldotetroses (erythrose and threose), ketotetrose (erythrulose), pyruvaldehyde, acetaldehyde, glyoxal, pyruvate, glyoxylate, and several unindentified carbonyl products. The concentrations of the carbonyl products, except pyruvate and ketotetrose, initially increased and then declined during the reaction, indicating their ultimate conversion to other products (like larger sugars or pyruvate). The uncatalyzed control reaction yielded no pyruvate or glyoxylate, and only trace amounts of pyruvaldehyde, acetaldehyde and glyoxal. In the presence of 15 mM catalytic primary amine, such as alanine, the rates of triose and pyruvaldehyde of synthesis were about 15-times and 1200-times faster, respectively, than the uncatalyzed reaction. Since previous studies established that alanine is synthesized from glycolaldehyde and formaldehyde via pyruvaldehyde as its direct precursor, the demonstration that the alanine catalyzes the conversion of glycolaldehyde and formaldehyde to pyruvaldehyde indicates that this synthetic pathway is capable of autocatalysis. The relevance of this synthetic process, named the Sugar Model, to the origin of life is discussed.
Acetaldehyde/analogs & derivatives/chemistry↗
Design and operational considerations of catalytic membrane reactors for ammonia synthesis
Production of ammonia using hydrogen derived from renewable electricity instead of hydrocarbon reforming would dramatically reduce the carbon footprint of this commodity chemical. Novel technologies such as catalytic membrane reactors may potentially be more compatible with distributed ammonia production than the conventional Haber-Bosch process. Here, a reactor model is developed based on integrating a standard industrial iron catalyst into a catalytic membrane reactor (CMR) equipped with an inorganic membrane that is selective to NH 3 over N 2 /H 2 . CMR performance is studied as functions of wide ranges of membrane properties and operating conditions. Conversion and ammonia recovery are dictated principally by the ammonia permeance, and the benefits by using membranes become significant above 100 GPU = 3.4 × 10 –8 mol m –2 s –1 Pa –1 . To be effective, the CMR requires a minimum selectivity for ammonia of 10 over both nitrogen and hydrogen, and purity scales with the effective selectivity. Increasing the pressure of operation significantly improves all metrics, and at P = 30 bar with a quality membrane ammonia is almost completely recovered, enabling direct recycle of un-reacted hydrogen and nitrogen without need for recompression. Temperature drives conversion and scales monotonically without thermodynamic limitations in a CMR. Alternatively, the temperature may be reduced as low as 300°C while achieving conversion levels surpassing equilibrium limits at T = 400°C in a conventional reactor.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Toward net energy-positive ammonia electrolysis: A 3,000 cm2 Bi-Polar electrolyzer for hydrogen production and ammonia remediation
Not Available
Gecgel, Ozhan (ORCID:0000000269321481)↗
Low-Pressure Electrolytic Ammonia (LPEA) Production
The project goal was to advance and demonstrate the techno-economic viability of a low-pressure electrolytic ammonia (LPEA) process for producing ammonia from electricity, hydrogen, and nitrogen. The critical enabling technology of the LPEA process is a proton-conducting electrolyte (PCE) developed by EERC and North Dakota State University (NDSU) capable of high proton conductivity (at least 1×10 -2 [0.01] siemens/centimeter [S/cm]) at 200°–300°C. An affordable PCE that works at 200°–300°C has been a major goal of the global electrochemistry industry for over 25 years, because it would enable operation at temperatures high enough to prevent catalyst poisoning and simplify water management and low enough to avoid temperature-driven degradation of fuel cell components comprising materials with differing coefficients of thermal expansion. Also critical to LPEA performance is a cathode catalyst capable of ammonia synthesis at a rate of ≥1×10 -10 moles/second-cm 2 catalyst surface area (mol-s -1 cm -2 ) in screening tests conducted at room temperature, and 1×10 -7 mol-s -1 cm -2 at 200°–300°C for commercial viability.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Detoxification of Halon Fire-Extinguishant Products
Ammonia compounds absorb toxic hydrogen halides as they are produced. Toxic acid vapors resulting from use of Halon (or equivalent) fire extinguishers immediately changed into nontoxic ammonium compounds when extinguishers contain some ammonia or ammonium carbonate. If ammonium carbonate used, particle size of resulting neutral compounds controlled to eliminate virtually any absorption into the lungs.
Miller, E. L.↗
Reinventing wastewater treatment plants: energy neutral treatment and enhanced fertilizer production through a novel resource recovery center
Wastewater treatment plants (WWTPs) are typically energy intensive, mainly due to the secondary treatment processes such as activated sludge (AS) for treatment of organics as well as nutrients like nitrogen. Nitrogen removal presents a big problem for WWTPs. The main form of nitrogen in wastewater is ammonium, and an AS process uses oxygen to convert ammonium into nitrite and nitrate which is then converted to nitrogen through denitrification process. During anaerobic digestion (AD), organic nitrogen gets degraded, resulting in an effluent stream (centrate) with a high nitrogen content, mostly in the form of ammonium. This contributes 15-30% of total nitrogen to the wastewater influent which further increases energy consumption for aeration. The project aims to transform this conventional municipal WWTPs into energy-neutral, resource-recovering facilities by integrating three core technologies: • Cloth Media Filtration (CMF) to replace conventional primary sedimentation (CPS) and increase the diversion of organics from the energy intensive secondary treatment to AD. This results in reduced energy demand for aeration in the secondary process while simultaneously increasing the biogas production in the anaerobic digesters. • Anerobic Digester to increase biogas and ammonia production. • Membrane Evaporation (ME) to recover ammonia from AD centrate and produce marketable fertilizer. The benefits of proposed WWTP process modifications were evaluated using techno economic analysis (TEA) and life cycle assessment (LCA). For CMF portion of the research a statistical analysis was employed to develop data-driven tools that could be used to enhance and optimize its performance in terms of energy savings and effluent quality. The main objective of this project is to reduce the energy demand for secondary treatment at municipal WWTPs by at least 50%, increase anaerobic digester (AD) biogas and ammonia production by 100% and 120%, respectively, and recover 90% of ammonia from the AD. Integrated CMF, AD, and ME was shown to work synergistically toward achieving these decarbonization targets through energy-positive treatment and fertilizer recovery techniques.
42 ENGINEERING↗
Mechanocatalytic Ammonia Synthesis over TiN in Transient Microenvironments
Environmentally friendly and energy-efficient ways to produce ammonia are essential to meet global food demands. In this study, a new approach for ammonia production at nominally ambient conditions is introduced. As proof of concept, ammonia is synthesized mechanocatalytically by ball milling titanium in a continuous gas flow. The ammonia synthesis reaction is proposed to follow a transient Mars–van Krevelen mechanism under mechanically activated conditions, where molecular nitrogen incorporation into the titanium lattice and titanium nitride hydrogenation occur in thermodynamically distinct environments. X-ray powder diffraction and X-ray absorption spectroscopy confirm the formation of titanium nitride from titanium and N2. The reactivity of nitrided titanium supports that lattice nitrogen plays a role in ammonia formation. The in situ formed titanium nitride is catalytically active, and the nitride regeneration reaction is determined to be the rate-limiting step. A preliminary technoeconomic analysis shows that this approach could be feasible for distributed ammonia production.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Sustainable ammonia synthesis from nitrogen wet with sea water by single-step plasma catalysis
Ammonia synthesis at ambient conditions employing intermittent distributed green sources of energy and feedstocks is globally sought to replace the centralized Haber-Bosch (H-B) process operating at high temperature and pressure. We report herein for the first time an effective and sustainable ammonia synthesis pathway from N 2 wet with seawater vapor over spherical SiO 2 and M/SiO 2 (M: Ag, Cu, and Co) catalysts driven by non-thermal plasma (NTP). Experimental results indicate that the presence of a catalyst is required for ammonia production from seawater vapor and N 2 . The Co/SiO 2 catalyst delivered the highest ammonia synthesis rate (r NH 3 ) of 3.7 mmol g cat -1 h -1 and energy yield of 3.2 g NH 3 ∙kW -1 ∙h -1 at a relatively low input power of 2 W. The extraction of H atoms from H 2 O molecules plays an important role in the ammonia synthesis from seawater vapor. Finally, this work unfolds a novel platform for the subsequent optimization of sustainable ammonia production from endless resources such as seawater and N 2 through catalytic non-thermal plasma potentially powered by renewable sources.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Project Development of an Electrochemical Denitration and Caustic Generation System for HLW Pretreatment at Hanford - 26350
An engineering-scale electrochemical processing skid is proposed to perform the denitration of Hanford tank waste, which would help to mitigate a key process concern with the direct feed processing of the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The reduction of nitrates and organic compounds in the waste feed will directly reduce hazardous NOx and ammonia gases generated during the vitrification process, which in turn will aid in addressing potential regulatory and safety challenges associated with processing large volumes of tank waste. This paper highlights the past legacy work, project layout, accomplishments from Phase 1 and research and development envisioned for Phase 2. An innovative electrochemical denitration and caustic generation (EDCGe) process was demonstrated for the pretreatment of tank waste at the Savannah River Site (SRS) in the early 2000s. The denitration electrolyzer, off-gas abatement system, and caustic generator electrolyzer are being developed with the intent that the denitration electrolyzer will convert nitrate and nitrite anions to nitrogen gas while also yielding other gaseous byproducts, which may include N2O, NH3, VOCs, and H2. The gaseous byproducts will be managed via a tandem off-gas catalyst-bed treatment system. The caustic generation electrolyzer will recycle NaOH from the feed to produce a clean caustic stream for use within the batching tanks at Hanford, aiding in the preparation of waste for WTP. The reduction in hazardous emissions and improved waste treatment processes provides a robust solution for nuclear waste management, contributing to environmental safety and regulatory compliance. The EDCGe technology is being adapted, modified, and updated for the preparation of the Direct Feed-High Level Waste (DF-HLW) flowsheet at Hanford. Phase 1 demonstrated a bench-scale proof-of-concept for reactions involving the denitration electrolyzer and gas phase abatement of ammonia. The electrochemical technology is drawing on the scientific outcomes that were reported in the legacy work. The results from Phase 1 demonstrated the viability of the EDCGe system in reducing the nitrogen species of simple non-radioactive waste simulants. Commercially available alloys used as electrode materials and membranes are being studied for the denitration and caustic generation electrolyzers. The continuation of this project holds promise for broader applications, such as energy-efficient ammonia production, and contributes significant advancements in nuclear waste management. Additional material discovery has been investigated into ceramic Na super ion conductive (NaSICON) materials and off-gas abatement catalyst discovery. NaSICON is of interest for selective transport of Na within the electrolyzers to make a clean caustic stream. Future integration and optimization efforts, informed by Phase 1 results and ongoing research, will continue to drive advancements in nuclear waste management technology. The technology developed for the EDCGe treatment of tank waste will also have broader potential to inform other fields, such as energy-efficient ammonia production, as well as ammonia abatement catalysis through the lessons learned in electrochemical nitrate reduction. The applications and benefits of this research extend beyond Hanford and the Savannah River Site, supported by a collaborative team of scientists and engineers from national labs, academia, and industry, ensuring a comprehensive approach to solving complex waste treatment challenges. The team is leveraging advanced electrochemical technologies, machine learning, novel catalysts tailored for gaseous nitrogen species, and cutting-edge reactor systems to enhance the process efficiency and effectiveness of the denitration process.
Rodene, Dylan [Savannah River National Laboratory ↗
Microwave-enhanced catalytic ammonia synthesis under moderate pressure and temperature
In this study, an alternative approach based on microwave-enhanced ammonia synthesis for Haber-Bosch process was carried out under moderate pressure of 0.1–0.65 MPa and temperature range of 280–400 °C over a stable CsRu/CeO 2 catalyst. The ammonia production rate is significantly improved under microwave conditions. At 0.65 MPa and 320 °C, maximum ammonia production rate was achieved at H 2 /N 2 ratio of 1/1. Stable performance was obtained in a 6-cycles of startup-shutdown operation for cumulative on-line time of 80 h. The work demonstrates the potential of microwave catalytic technology for the distributed ammonia synthesis using renewable power having intermittent nature of energy supply.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗