Search NASA⌕ Search

SEARCH · Search NASA

Results for “analysis of kinetic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Zeolitic Imidazole Framework Decorated Substrates for Lead Removal From Water

Lead contamination in water supplies necessitates efficient and mechanistically understood removal strategies. Zeolitic imidazole frameworks (ZIFs) are promising adsorbents; however, ZIF-67 (Co-based) is more susceptible to hydrolysis than its zinc analogue ZIF-8, raising questions about stability during metal uptake. In this study, we systematically compare ZIF-8 and ZIF-67 under controlled pH conditions and evaluate how substrate anchoring influences hydrolytic stability and Pb 2+ adsorption behavior. By integrating adsorption capacity measurements, kinetic analysis, metal-node leaching data, and structural characterization, we distinguish ion exchange from framework degradation and clarify the temporal interplay between adsorption and hydrolysis. Although ZIF-67 exhibits greater hydrolytic sensitivity, coordination with phosphoryl-bearing Mucor hiemalis membranes significantly reduces Co 2+ leaching and enhances structural retention. Under the optimized conditions (pH 5), ZIF-67@Mucor achieves a maximum Pb 2+ adsorption capacity of 867 mg g −1 . These findings demonstrate that substrate-dependent stabilization enables controlled exploitation of ZIF reactivity for aqueous metal remediation.

Adsorption↗
DOE OSTI2023

Investigation of methane and ethane pyrolysis with highly active and durable iron-alumina catalyst to produce hydrogen and valuable nano carbons: Continuous fluidized bed tests and reaction rate analysis

The goal of this research work was to evaluate a novel iron-alumina catalyst for methane and ethane pyrolysis with high conversion rates to H 2 with a long life time to address two major issues reported with previous catalysts. Fluidized bed tests demonstrated continuous hydrogen production while collecting carbon containing fines. During the 230 h fluid bed test the methane conversion rate to hydrogen at 700 °C remained above 80% for 160 h while creating valuable nano carbons. Similarly high catalyst lifetimes with high methane conversions have not been reported before. Ethane was more active than methane for pyrolysis with 100% conversion to H 2 . Transmission electron microscopy and Raman analysis of the carbon showed single and multiwall nanotubes and conglomerate nano-fibers. Ethane did not impact the allotrope of carbon formed. TGA was used to create a data array that was used for kinetic analysis and reaction model parametric regressions. Ethane had a higher rate of pyrolysis that was 2.3–2.8 times that of methane. Ethane pyrolysis was found to be more sensitive to temperature with a higher activation energy of 62 kJ/mol as compared to methane at 43 kJ/mol. The frequency factor, A i , was significantly higher for ethane at 0.73 [[kmol/m 3 -sec]/[N/m2] n ] compared to 0.03 for methane on the same basis. Both gases had a functional partial pressure order dependence of ~0.6 based on the regression analysis.

08 HYDROGEN↗
DOE OSTI2021

Probing the antiknock effect of anisole through an ignition, speciation and modeling study of its blends with isooctane

In order to unravel the reaction pathways relevant to anisole co-oxidation within a fuel blend, a detailed study of isooctane/anisole blends was performed with the ULille RCM. Ignition delays as well as mole fraction profiles were measured during a two-stage ignition delay using sampling and GC techniques. These results are used to validate a kinetic model developed from ab initio calculations for the most relevant rate constants which included H-atom abstraction reactions from anisole, and reactions on the potential energy surfaces of methoxyphenyl + O 2 and anisyl + O 2 . Pressure dependent rate constants were computed for the methoxyphenyl + O 2 and anisyl + O 2 reactive systems using master equation code analysis. The new kinetic model shows good agreement with the experimental data. Dual brute-force sensitivity analysis was performed, on both first- and second-stages of ignition, allowing the identification of the most important reactions in the prediction of both ignition delays. It was observed that while pure anisole does not show NTC behavior, a 60/40 isooctane/anisole blend displays such behavior, as well as two-stage ignition. This suggests anisole addition may not be as beneficial to knock resistance as expected from its high octane number. The kinetic modeling results demonstrate the importance of H-abstraction reactions both from the methoxy group and from the aryl ring in ortho-position and the addition of the resultant radicals to O2, mostly leading to the formation of polar or non-aromatic products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Thermodynamic properties and crystallization kinetics at high liquid undercooling

The heat capacities of liquid and crystalline Au-Pb-Sb alloys in the glass-forming composition range were measured with droplet emulsion and bulk samples. Based on the measured C(sub p) data, the entropy, enthalpy, and Gibbs free energy functions of the eutectic, solid mixture, and undercooled liquid were determined as a function of undercooling and compared with theoretical predictions. The results indicate an isentropic temperature at 313 + or - 5 K, which agrees well with experimental data for the glass transition. A kinetics analysis of the nucleation undercooling response suggests that the proper choice for the Gibbs free energy change during crystallization is most important in analyzing the nucleation kinetics. By classical nucleation theory, the prefactors obtained, based on a variety of theoretical predictions for the driving force, can differ by six orders of magnitude. If the nucleation rates are extrapolated to high undercooling, the extrapolations based on measured heat capacity data show agreement, whereas the predicted nucleation rates are inconsistent with results from drop tower experiments. The implications for microg experiments are discussed.

Fecht, Hans J.↗
NASA NTRS2006

Determining Kinetic Parameters for Isothermal Crystallization of Glasses

Non-isothermal crystallization techniques are frequently used to determine the kinetic parameters for crystallization in glasses. These techniques are experimentally simple and quick compared to the isothermal techniques. However, the analytical models used for non-isothermal data analysis, originally developed for describing isothermal transformation kinetics, are fundamentally flawed. The present paper describes a technique for determining the kinetic parameters for isothermal crystallization in glasses, which eliminates most of the common problems that generally make the studies of isothermal crystallization laborious and time consuming. In this technique, the volume fraction of glass that is crystallized as a function of time during an isothermal hold was determined using differential thermal analysis (DTA). The crystallization parameters for the lithium-disilicate (Li2O.2SiO2) model glass were first determined and compared to the same parameters determined by other techniques to establish the accuracy and usefulness of the present technique. This technique was then used to describe the crystallization kinetics of a complex Ca-Sr-Zn-silicate glass developed for sealing solid oxide fuel cells.

Ray, C. S.↗
DOE OSTI2023

Kinetic and X-ray Absorption Spectroscopic Analysis of Catalytic Redox Cycles over Highly Uniform Polymetal Oxo Clusters

Metal–organic framework materials (MOFs) offer an opportunity for investigating catalytic properties of polymetal oxo clusters that are highly well defined and uniform in nature, in contrast to other classes of catalysts that may exhibit a propensity toward active site heterogeneity. We report herein a kinetic and X-ray absorption spectroscopy (XAS) analysis of the two-electron oxidation of CO over divalent metal sites in MIL-100(M = Fe, Cr) (MIL = Materials of Institut Lavoisier) materials carrying μ 3 -oxo bridged trimers, and connect observations about the kinetic relevance of redox steps to density functional theory (DFT) predictions published previously. The high degree of uniformity evident from in situ titration measurements leads to a congruence in mechanistic inferences made from steady-state catalytic, transient stoichiometric, isotopic exchange, and isotopic tracer data that all point to a sequential mechanism comprised of separate oxidation and reduction half-cycle steps conjoined by an active oxygen intermediate. In situ XAS data reinforce mechanistic conclusions derived from kinetic analysis, and suggest that the active oxygen intermediate may be more appropriately characterized as an iron-oxyl (Fe 3+ –O – ) rather than an iron-oxo (Fe 4+ =O 2– ) species. The Cr analogue of MIL-100 exhibits contrasting rate features that can be rationalized using an identical sequence of steps as MIL-100(Fe), but with a highly dissimilar set of kinetic parameters that can also be validated using transient stoichiometric experiments. The larger coverages of active oxygen intermediates on MIL-100(Cr) are consistent with predictions from prior DFT studies that suggest more stable and less reactive active oxygen species for metals with lower d-electron counts, and point to metal identity as a lever for precisely controlling the kinetic relevance of oxidation and reduction half-cycles in catalytic redox sequences over polymetal oxo clusters. Importantly, the results presented point to the utility of developing broadly applicable structure–catalytic property relationships over MOF nodes specifically, and highly uniform catalysts more generally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Processing of extraterrestrial materials by high temperature vacuum vaporization

It is noted that problems associated with the extraction and concentration of elements and commpounds important for the construction and operation of space habitats have received little attention. High temperature vacuum vaporization is considered a promising approach; this is a technique for which the space environment offers advantages in the form of low ambient pressures and temperatures and the possibility of sustained high temperatures via solar thermal energy. To establish and refine this new technology, experimental determinations must be made of the material release profiles as a function of temperature, of the release kinetics and chemical forms of material being transported, and of the various means of altering release kinetics. Trace element data determined by neutron activation analysis of meteorites heated to 1400 C in vacuum is summarized. The principal tool, high temperature spectrometry, is used to examine the vaporization thermodynamics and kinetics of major and minor elements from complex multicomponent extraterrestrial materials.

Grimley, R. T.↗
DOE OSTI2026

Effect of Sample Mass, Confinement, and Preheating Time on the Thermal Response of LLM‐105: Experiments and Kinetic Analysis

Various small-scale experiments were performed to provide data for developing a model to predict the thermal response of LLM-105 over a wide range of conditions. The thermal decomposition of LLM-105 was studied as a function of sample mass, confinement of volatile products, and preheating time in both isothermal and ramped heating experiments. The thermal decomposition of LLM-105 is a two-step process, as shown by the two exothermic peaks in the heat flow profiles, which were fitted to two nth-order autocatalytic reaction models with a similar activation energy of ∼289 kJ/mol. The magnitude and shape of these peaks varied with sample mass and confinement. Increasing sample mass enhanced the second exotherm with respect to the first one, while increasing the level of confinement promoted a transition from a sublimation-dominated regime towards thermal decomposition. The effect of LLM-105 particle size on the rate of weight loss was evident for open-pan experiments, where bigger particles sublimed at lower temperatures than smaller particles. Thermal response and solid residue composition of LLM-105 samples were analyzed following preheating for different durations. Longer preheating times caused a shift of the second exotherm to lower temperatures and a decrease in the reaction enthalpy, confirming that LLM-105 decay is a consecutive reaction mechanism, probably autocatalytic. In conclusion, the kinetic model derived from ramped experiments was validated against the measured LLM-105 fraction remaining and the enthalpy remaining of the solid residue as a function of preheating times and showed good agreement.

Chemistry - Chemical explosives↗
NASA NTRS1976

Chemical kinetics of homogeneous atmospheric oxidation of sulfur dioxide

A systematic evaluation of known homogeneous SO2 reactions which might be important in air pollution chemistry is carried out. A mechanism is developed to represent the chemistry of NOx/hydrocarbon/SO2 systems, and the mechanism is used to analyze available experimental data appropriate for quantitative analysis of SO2 oxidation kinetics. Detailed comparisons of observed and predicted concentration behavior are presented. In all cases, observed SO2 oxidation rates cannot be explained solely on the basis of those SO2 reactions for which rate constants have been measured. The role of ozone-olefin reactions in SO2 oxidation is elucidated.

Sander, S. P.↗
DOE OSTI2024

Adsorption of molecular iodine and alkyl iodides from spent-nuclear-fuel-reprocessing off-gas using reduced silver mordenite

Radioactive iodine is a hazardous byproduct of spent-nuclear-fuel reprocessing that must be removed from the off-gas stream before it can be discharged. Reduced silver mordenite (Ag 0 Z) is currently the baseline material for iodine capture in the U.S. Although the performance characteristics and capture mechanisms of I 2 and CH 3 I have been established, similar investigations into long-chain organic iodides have yet to be performed. In this study, thin beds of Ag 0 Z were loaded with I 2 , CH 3 I, C 4 H 9 I, and C 12 H 25 I (5 ppm to 50 ppm) carried in a dry air stream at 150°C. The maximum iodine capacity was 105 ± 5 mg I/g Ag 0 Z for all species. Saturated Ag 0 Z samples were characterized using scanning electron microscopy, X-ray fluorescence, X-ray photoelectron spectroscopy, diffuse reflectance UV–visible spectroscopy, pair distribution function analysis, and thermogravimetric analysis. Further, near-complete Ag utilization and similar physical/chemical properties were observed for all samples. Through a comparison with previous studies and an investigation of aged Ag 0 Z, we propose that iodine species react with Ag + at exchange sites, forming α-AgI within the mordenite channels, and with surface Ag 0 nanoparticles, yielding β-/γ-AgI. The available Ag sites in the interior (Ag + ) and exterior (Ag 0 ) of mordenite determine the adsorption capacity since α-AgI formation is limited by the total pore volume. Potential iodine uptake routes were summarized for aging and non-aging environments. A scalable predictive model was implemented for deep-bed iodine removal, and predictions were in good agreement with experimental data. Sensitivity analysis suggests that iodine uptake kinetics is governed by pore diffusion.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Lowering the barrier to access information-rich transient kinetic data for machine learning methods

Transient kinetic data contain a wealth of information about intrinsic features of a catalyst as well as the reaction mechanism. Currently, high volume transient data is underutilized, and data science methods could both increase the value of information that can be extracted from this data, integrate experimental with theoretical data sources, and accelerate the pace of catalyst technology advancement. Transient kinetic characterizations with simple probe molecules exhibiting reversible adsorption, irreversible adsorption and bulk-surface diffusion are presented as training components for similar experiments with more complex surface reactions. In conclusion, by increasing the availability and accessibility of transient kinetic data through details of its structure and acquisition, we aim to decrease the barrier for data scientists to apply machine learning methods to this valuable data source.

Catalysis↗
DOE OSTI2024

Quantifying the regime of thermodynamic control for solid-state reactions during ternary metal oxide synthesis

The success of solid-state synthesis often hinges on the first intermediate phase that forms, which determines the remaining driving force to produce the desired target material. Recent work suggests that when reaction energies are large, thermodynamics primarily dictates the initial product formed, regardless of reactant stoichiometry. Here, we validate this principle and quantify its constraints by performing in situ characterization on 37 pairs of reactants. These experiments reveal a threshold for thermodynamic control in solid-state reactions, whereby initial product formation can be predicted when its driving force exceeds that of all other competing phases by ≥60 milli–electron volt per atom. In contrast, when multiple phases have a comparable driving force to form, the initial product is more often determined by kinetic factors. Analysis of the Materials Project data shows that 15% of possible reactions fall within the regime of thermodynamic control, highlighting the opportunity to predict synthesis pathways from first principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

DME-Propane Autoignition Measurements inside a Shock Tube

Dimethyl ether (DME) is a biofuel that has the potential to replace diesel in heavy-duty engines. A blend of propane (C3H8) and DME could reduce emissions when compared to diesel at heavy-duty compression engine-relevant conditions. Testing a potential new mixture in a compression engine requires a high-fidelity chemical kinetics model that accurately predicts autoignition delay times, which is especially necessary for a compression engine. In this work, autoignition data has been gathered at an equivalence ratio of 2.0 for pressures of 60 and 80 bar. DME and propane were combusted in synthetic air while excited hydroxyl (OH*) chemiluminescence was used to gather ignition delay times. Data was compared to recent chemical kinetic mechanisms for the two different pressures. Using the mechanism with the best fit of autoignition data, a sensitivity analysis was conducted to analyze the chemical kinetics of the DME/C3H8 combustion at elevated pressures.

Mohammed, Zuhayr Pasha↗
DOE OSTI2022

Characterization of Interactions between CTX-M-15 and Clavulanic Acid, Desfuroylceftiofur, Ceftiofur, Ampicillin, and Nitrocefin

Cefotaximase-Munich (CTX-M) extended-spectrum beta-lactamases (ESBLs) are commonly associated with Gram-negative, hospital-acquired infections worldwide. Several beta-lactamase inhibitors, such as clavulanate, are used to inhibit the activity of these enzymes. To understand the mechanism of CTX-M-15 activity, we have determined the crystal structures of CTX-M-15 in complex with two specific classes of beta-lactam compounds, desfuroylceftiofur (DFC) and ampicillin, and an inhibitor, clavulanic acid. The crystal structures revealed that Ser70 and five other residues (Lys73, Tyr105, Glu166, Ser130, and Ser237) participate in catalysis and binding of those compounds. Based on analysis of steady-state kinetics, thermodynamic data, and molecular docking to both wild-type and S70A mutant structures, we determined that CTX-M-15 has a similar affinity for all beta-lactam compounds (ceftiofur, nitrocefin, DFC, and ampicillin), but with lower affinity for clavulanic acid. A catalytic mechanism for tested β-lactams and two-step inhibition mechanism of clavulanic acid were proposed. CTX-M-15 showed a higher activity toward DFC and nitrocefin, but significantly lower activity toward ampicillin and ceftiofur. The interaction between CTX-M-15 and both ampicillin and ceftiofur displayed a higher entropic but lower enthalpic effect, compared with DFC and nitrocefin. DFC, a metabolite of ceftiofur, displayed lower entropy and higher enthalpy than ceftiofur. This finding suggests that compounds containing amine moiety (e.g., ampicillin) and the furfural moiety (e.g., ceftiofur) could hinder the hydrolytic activity of CTX-M-15.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1998

Assessment of Uncertainty in the Determination of Activation Energy for Polymeric Materials

An assessment of the experimental uncertainty in obtaining the kinetic activation energy from thermogravimetric analysis (TGA) data is presented. A neat phenolic resin, Borden SC1O08, was heated at three heating rates to obtain weight loss vs temperature data. Activation energy was calculated by two methods: the traditional Flynn and Wall method based on the slope of log(q) versus 1/T, and a modification of this method where the ordinate and abscissa are reversed in the linear regression. The modified method produced a more accurate curve fit of the data, was more sensitive to data nonlinearity, and gave a value of activation energy 75 percent greater than the original method. An uncertainty analysis using the modified method yielded a 60 percent uncertainty in the average activation energy. Based on this result, the activation energy for a carbon-phenolic material was doubled and used to calculate the ablation rate In a typical solid rocket environment. Doubling the activation energy increased surface recession by 3 percent. Current TGA data reduction techniques that use the traditional Flynn and Wall approach to calculate activation energy should be changed to the modified method.

Darby, Stephania P.↗
DOE OSTI2021

Methods—Analyzing Electrochemical Kinetic Parameters in Deep Eutectic Solvents Using an Extended Butler-Volmer Equation

Deep eutectic solvents (DESs) are promising electrolytes for electrochemical redox reactions, which can be used in redox flow batteries (RFBs). However, in some systems like the Fe 2+/3+ redox reaction in ethaline, traditional Tafel-based kinetic analysis generates unreasonable kinetic parameters (i.e., large anodic/cathodic charge transfer coefficients ( α a , α c ) along with low exchange current densities ( i 0 )). This hinders a comprehensive kinetic and kinetic mechanism study. Here, we perform a detailed investigation of the Tafel analysis using a series of synthetic rotating disk electrode (RDE) data. We find the Tafel analysis only works well when i 0 < 0.57 i lim (limiting current density) in our scenario and leads to abnormal kinetic values once i 0 exceeds this limiting value. Thus, we propose an extended Butler-Volmer (ex-BV) analysis based on modern non-linear fitting techniques to obtain the actual kinetic parameters for such systems. The results show that this method fits the RDE data closely and generates reliable α a , α c and i 0 values, demonstrating that it is a good replacement for traditional Tafel analysis for kinetic studies in high-viscosity electrolytes such as DES systems.

Electrochemistry↗
NASA NTRS1997

Analysis of Crystallization Kinetics

A realistic computer model for polymorphic crystallization (i.e., initial and final phases with identical compositions), which includes time-dependent nucleation and cluster-size-dependent growth rates, is developed and tested by fits to experimental data. Model calculations are used to assess the validity of two of the more common approaches for the analysis of crystallization data. The effects of particle size on transformation kinetics, important for the crystallization of many systems of limited dimension including thin films, fine powders, and nanoparticles, are examined.

Kelton, Kenneth F.↗
NASA NTRS1992

Effect of including variable gas properties and entrained particles in the flow analysis of the ASRM nozzle

The objective of this study is to determine the effect of using constant gas properties for the analysis of the Advanced Solid Rocket Motor (ASRM) nozzle and to gain more understanding concerning those types of analysis which might require this additional complexity. Kinetics data for viscosity, thermal conductivity, specific heat, and specific heat ratio are extracted from the Solid Propellant Rocket Motor Performance Prediction Computer Program (SPP) and tabulated as a function of temperature. These tables are added to the Aerovisc computational fluid dynamics (CFD) code in place of the constant gas property values. The results of a CFD analysis of the ASRM 48 inch motor with constant gas properties will be compared with an analysis which uses variable gas properties. Mach number, surface pressure, and torque plots are presented. A full scale ASRM analysis using SPP with and without particle flow is presented.

Clayton, Curtis D.↗