Search NASA⌕ Search

SEARCH · Search NASA

Results for “angular deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Influence of severe plastic deformation on intermetallic particles in Mg-12 wt.%Zn alloy investigated using transmission electron microscopy

The in-depth microstructural characterization of intermetallic particles in an Mg-12 wt.%Zn binary alloy subjected to a severe plastic deformation is presented. The alloy was processed by four passes via equal channel angular pressing with an applied back pressure at a gradually decreasing temperature and analyzed using transmission electron microscopy techniques to observe the influence of processing on intermetallic particles. The results are compared with the initial state of the material prior to severe plastic deformation. The microstructural evolution of the α-Mg matrix and the Mg{sub 21}Zn{sub 25}, Mg{sub 51}Zn{sub 20} and MgZn{sub 2} was analyzed using bright field imaging, selected area electron diffraction, high-resolution transmission electron microscopy and high-angle annular dark field imaging in scanning mode. The plastic deformation process influenced the α-Mg matrix and each type of intermetallic particle. The α-Mg matrix consisted of two types of areas. The first type of area had a highly deformed structure, and the second type of area had a partially recrystallized structure with an average grain size of approximately 250 nm. The Mg{sub 21}Zn{sub 25} microparticles exhibited distinct forms in the α-Mg matrix that were characterized as a single-crystalline form, a nano-crystalline form and a broken up form. No evidence of Mg{sub 51}Zn{sub 20} nanoparticles within the α-Mg matrix was found in the microstructure, which indicates their dissolution or phase transformation during the deformation process. MgZn{sub 2} nanoparticles exhibited different behavior in both types of α-Mg matrix. Two orientation relationships toward the highly deformed α-Mg matrix were observed; however, there was no relationship toward the partially recrystallized α-Mg matrix. Additionally, the growth of the MgZn{sub 2} nanoparticles was different in the two types of α-Mg matrix. The Mg{sub 51}Zn{sub 20} nanoparticles inside Mg{sub 21}Zn{sub 25} microparticles exhibited a distinct behavior within the single-crystalline or nano-crystalline form of the parent Mg{sub 21}Zn{sub 25} microparticles. The Mg{sub 21}Zn{sub 25} + Mg{sub 51}Zn{sub 20} eutectic compound was confirmed for both forms of the parent Mg{sub 21}Zn{sub 25} microparticles, and the growth of Mg{sub 51}Zn{sub 20} nanoparticles is discussed. - Highlights: •Comprehensive microstructure characterization of Mg-12 wt.%Zn alloy after ECAP-BP •TEM analysis of changes of intermetallic phases caused by SPD •Mg{sub 21}Zn{sub 25} particles exhibit nano-crystalline regions with grain size below 100 nm. •MgZn{sub 2} preserved its orientation relationship toward highly deformed α-Mg after SPD. •Existence of Mg{sub 21}Zn{sub 25} + Mg{sub 51}Zn{sub 20} eutectic remained for each Mg{sub 21}Zn{sub 25} particle form.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anisotropic Motions of Fibrils Dictated by Their Orientations in the Lamella: A Coarse-Grained Model of a Plant Cell Wall

Plant cell walls are complex systems that exhibit the characteristics of both rigid and soft material depending on their external perturbations. The three main polymeric components in a plant primary cell wall are cellulose fibrils, hemicellulose, and pectins. These components interact in a hierarchical fashion giving rise to mesoscale structural features such as cellulose bundles, lamella stacking, and so on. Although several studies have focused on understanding these unique structural features, a clear picture linking them to cell wall mechanics is still lacking. As a first step toward this goal, a phenomenological model of plant cell wall has been developed in this work by using available experimental data to investigate the underlying connections between mesoscale structural features and the motions of fibrils during deformation. In this model cellulose fibrils exhibit motions such as angular reorientations and kinking upon forced stretching. Furthermore, these motions are dependent on the orientation of fibrils with respect to the stretch direction, i.e., fibrils that are at an angle to the stretch direction exhibit predominant angular reorientations, while fibrils transverse to the stretch direction undergo kinking as a result of transverse compression. Varying the chain length of pectin had negligible effects on these motions. One of the main contributions from this work is the development of a simple model that can be easily fine-tuned to test other hypotheses and extended to include additional experimental knowledge about the structural aspects of cell walls in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2022

TDCOSMO. VII. Boxyness/discyness in lensing galaxies: Detectability and impact on H 0

In the context of gravitational lensing, the density profile of lensing galaxies is often considered to be perfectly elliptical. Potential angular structures are generally ignored, except to explain flux ratios of point-like sources (i.e. flux ratio anomalies). Surprisingly, the impact of azimuthal structures on extended images of the source has not been characterised, nor has its impact on the H 0 inference. We address this task by creating mock images of a point source embedded in an extended source and lensed by an elliptical galaxy on which multipolar components are added to emulate boxy or discy isodensity contours. Modelling such images with a density profile free of angular structure allows us to explore the detectability of image deformation induced by the multipoles in the residual frame. Multipole deformations are almost always detectable for our highest signal-to-noise ratio (S/N) mock data. However, the detectability depends on the lens ellipticity and Einstein radius, on the S/N of the data, and on the specific lens modelling strategy. Multipoles also introduce small changes to the time-delays. We therefore quantify how undetected multipoles would impact H 0 inference. When no multipoles are detected in the residuals, the impact on H 0 for a given lens is in general less than a few k ms -1 Mpc -1 , but in the worst-case scenario, combining low S/N in the ring and large intrinsic boxyness or discyness, the bias on H0 can reach 10-12 km s -1 Mpc -1 . If we now look at the inference on H 0 from a population of lensing galaxies with a distribution of multipoles representative of what is found in the light profile of elliptical galaxies, we find a systematic bias on H 0 of less than 1%. A comparison of our mock systems to the state-of-the-art time-delay lens sample studied by the H0LiCOW and TDCOSMO collaborations indicates that multipoles are currently unlikely to be a source of substantial systematic bias on the inferred value of H 0 from time-delay lenses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Microscopic-macroscopic level densities for low excitation energies

Level density ρ(E,Q) is derived within the micro-macroscopic approximation (MMA) for a system of strongly interacting Fermi particles with the energy E and additional integrals of motion Q , in line with several topics of the universal and fruitful activity of A. S. Davydov. Within the extended Thomas Fermi and semiclassical periodic orbit theory beyond the Fermi-gas saddle-point method, we obtain ρ ∝ I ν (S)/S ν , where I ν (S) is the modified Bessel function of the entropy S . For small shell-structure contribution, one finds ν = κ/2 + 1, where κ is the number of additional integrals of motion. This integer number is a dimension of Q, Q = { N, Z , …} for the case of two-component atomic nuclei, where N and Z are the numbers of neutrons and protons, respectively. For much larger shell structure contributions, one obtains ν = κ /2 + 2. The MMA level density ρ reaches the well-known Fermi gas asymptote for large excitation energies and the finite micro-canonical combinatoric limit for low excitation energies. Further, the additional integrals of motion can also be the projection of the angular momentum of a nuclear system for nuclear rotations of deformed nuclei, number of excitons for collective dynamics, and so on. Fitting the MMA total level density ρ( E , Q) for a set of the integrals of motion Q = { N, Z }, to experimental data on a long nuclear isotope chain for low excitation energies, one obtains the results for the inverse level-density parameter K , which differs significantly from those of neutron resonances due to shell, isotopic asymmetry, and pairing effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Nucleon localization function in rotating nuclei

An electron localization function was originally introduced to visualize in positional space bond structures in molecules. It became a useful tool to describe electron configurations in atoms, molecules, and solids. In nuclear physics, a nucleon localization function (NLF) has been used to characterize cluster structures in light nuclei, formation of fragments in fission, and pasta phases appearing in the inner crust of neutron stars. In the case of a deformed rotating nucleus, several NLFs can be introduced, depending on the definition of the spin-quantization axis, direction of the total angular momentum, and self-consistent symmetries of the system. Contributions to the NLF from the current density, spin-current tensor density, and density gradient terms are negligible in the nuclear interior. The oscillating pattern of the simplified NLF can be explained in terms of a constructive interference between kinetic-energy and particle densities. The characteristic nodal pattern seen in the NLF in the direction of major axis of a rotating nucleus comes from single-particle orbits carrying large aligned angular momentum. The variation of the NLF along the minor axis of the nucleus can be traced back to deformation-aligned orbits.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Successive neutron alignments in the yrast, negative-parity band of oblate-deformed Tl 199

The negative-parity band structure built on the proton h 9/2 state in 199 Tl has been established up to an excitation energy of 7 MeV and spin of (51/2) ℏ. The level scheme has been extended with the inclusion of fourteen new transitions de-exciting levels at high spin. The ΔI = 1 γ rays are found to be more prominently visible in the spectra when comparing to Δ I = 2 transitions. Rotation alignments are evident at frequencies of 0.22 and 0.30 MeV with both being attributed to the breaking of pairs of neutrons in the i 13/2 subshell. Since 199 Tl is expected to have weak oblate deformation, and lies in a transitional region where competing contributions to the spin are expected from collective rotation and the angular momentum of high-j nucleons, calculations using both the principal axis cranking (PAC) and tilted axis cranking (TAC) formalisms have been performed to understand its structure. Both the PAC and TAC calculations are found to provide a satisfactory description of the evolution of excitation energies with spin. The PAC calculations give a good account of the experimental crossing frequencies and associated spins. Furthermore, the structure of the yrast, negative-parity band in 199 Tl may be primarily understood in terms of the collective rotation of a moderately deformed oblate nucleus, along with contributions to the angular momentum from two pairs of rotation-aligned i 13/2 neutrons.

190 ≤ A ≤ 219↗
DOE OSTI2020

Solid Cylinder Torsion for Large Shear Deformation and Failure of Engineering Materials

Using a thin-walled tube torsion test to characterize a material’s shear response is a well-known technique; however, the thin walled specimen tends to buckle before reaching large shear deformation and failure. An alternative technique is the surface stress method (Nadai 1950; Wu et al. J Test Eval 20:396–402, 1992), which derives a shear stress-strain curve from the torque-angular displacement relationship of a solid cylindrical bar. The solid bar torsion test uniquely stabilizes the deformation which allows us to control and explore very large shear deformation up to failure. However, this method has rarely been considered in the literature, possibly due to the complexity of the analysis and experimental issues such as twist measurement and specimen uniformity.

42 ENGINEERING↗
DOE OSTI2018

Equal channel angular extrusion for bulk processing of Fe–Co–2V soft magnetic alloys, part II: Texture analysis and magnetic properties

In Part I, equal channel angular extrusion (ECAE) was demonstrated as a novel, simple-shear deformation process for producing bulk forms of the low ductility Fe–Co–2V (Hiperco 50A®) soft ferromagnetic alloy with refined grain sizes. Microstructures and mechanical properties were discussed. In this Part II contribution, the crystallographic textures and quasi-static magnetic properties of ECAE-processed Hiperco were characterized. The textures were of a simple-shear character defined by partial {110} and <111> fibers inclined relative to the extrusion direction, in agreement with the expectations for simple-shear deformation textures of BCC metals. These textures were observed throughout all processing conditions and only slightly reduced in intensity by subsequent recrystallization heat treatments. Characterization of the magnetic properties revealed a lower coercivity and higher permeability for ECAE-processed Hiperco specimens relative to the conventionally processed and annealed Hiperco bar. In conclusion, the effects of the resultant microstructure and texture on the coercivity and permeability magnetic properties are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Calcite Twinning in Mollusk Shells and Carrara Marble

Mollusk shells protect the animals that form and inhabit them. They are composites of minerals and organics, with diverse mesostructures, including nacre, prismatic calcite, crossed-lamellar aragonite, and foliated calcite. Twins, that is, crystals mirror symmetric with respect to their coherent interface, occurring as formation or deformation twins, are observed in all mollusk shell mesostructures but never within calcite prisms. Here, nanotwins and microwins within single calcite prisms are observed in different shells. Using Polarization-dependent Imaging Contrast (PIC) mapping with 20–60 nm resolution, twins are observed to be 0.2–3 µm thick layers of differently oriented and colored crystals with respect to the main prism crystal. Multiple twins are interspersed with the prism crystal, parallel to one another, and similarly oriented. When comparing images of calcite prisms and twins obtained by PIC mapping and by Electron Back-Scattered Diffraction (EBSD), the images correspond precisely. All twins are e-twin types, with 127° angular distance between c-axes. E-twins are the most common deformation twins in geologic calcite, as also observed here in Carrara marble. Location of all twins near the outer surface of all shells and e-twin type both suggest that twins within calcite prisms in mollusk shells result from deformation twinning.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pomeranchuk instability from electronic correlations in CsTi 3 Bi 5 kagome metal

Electronic nematicity, the spontaneous breaking of rotational symmetry, has emerged as a key instability in correlated quantum systems. CsTi 3 Bi 5 , a kagome metal of the AV 3 Sb 5 (A = K, Rb, Cs) family, hosts rich unconventional electronic phases, yet the origin of its nematicity remains unsettled. Here, we combine polarization-dependent angle-resolved photoemission spectroscopy with functional renormalization group calculations on a fully interacting ab initio model. We reveal an orbital-selective nematic deformation in the low-energy band structure and identify a finite angular momentum (d-wave) Pomeranchuk instability driven by electronic correlations in specific orbital channels and detuning from Van Hove singularities. Our results establish a direct link between orbital selectivity and symmetry-breaking instabilities in CsTi 3 Bi 5 , providing a microscopic framework for nematic order in kagome systems.

Bigi, Chiara [Synchrotron SOLEIL, Saint-Aubin (Fra↗
DOE OSTI2019

Ground-state shape evolution in Er and Yb isotopes

The ground-state shape (phase) evolution in Er and Yb isotopes is manifested in the axially deformed Nilsson mean-field plus extended pairing model. The energy ratio R 0 2 + / 2 1 + , the odd-even mass differences, the ground-state occupation probabilities of valence nucleon pairs with different angular momenta and the information entropy are calculated. It is shown from these quantities as functions of the quadrupole deformation parameter and the overall pairing interaction strength that the ground-state shape (phase) evolution is mainly driven by the pairing interaction and less affected by the quadrupole deformation, which thus provides a possible origin of the ground-state shape (phase) evolution of these isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Generation, dynamics, and correlations of the fission fragments' angular momenta

The generation of angular momentum in fissioning nuclei is not well understood. The predictions of different models disagree, particularly concerning the correlation between the fragments' angular momenta. In this article, a time-dependent collective Hamiltonian model is proposed to treat the generation of the angular momentum in the fission fragments due to the quantum uncertainty principle as well as the dynamics of the collective wave function during and after scission. The model is constructed in the framework of the frozen Hartree-Fock approximation using a Skyrme energy functional to extract deformations of the fission fragments as well as the interactions in a derived collective Hamiltonian. The fission reactions studied are $^{240}$Pu $\rightarrow$ $^{132}$Sn+$^{108}$Ru and $^{240}$Pu $\rightarrow$ $^{144}$Ba+$^{96}$Sr. The model can account for a large part of the angular momentum found in experimental data. The orientation of the angular momentum of each fragment is found to be mainly in the plane perpendicular to the fission axis, in agreement with the experiment. The magnitudes of the angular momenta in the two fragments are nearly uncorrelated, in agreement with the recent experimental data of Wilson et al., Nature (London) 590, 566 (2021). Some of the conclusions of the traditional collective vibration model are supported by the present model but some are not. Surprisingly, it is found that the angular momenta of the fragments are slightly correlated positively as in a wriggling mode. As a result, it is also found that the presence of an octupole deformation in a fragment can significantly increase the generated angular momentum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Investigations of Properties of {sup 89}Y Levels with Reactor Fast Neutrons

By employing a beam of reactor fast neutrons, the spectrum of gamma rays up to an energy of 4.6MeV and their angular distributions with respect to the neutron-beamaxis aremeasured in the reaction {sup 89}Y(n, n'γ). The multipolarities and multipole-mixture parameters for 34 gamma transitions and the spin–parities J{sup π} of states excited in this reaction are determined. The lifetimes of the lowest 32 levels of 89Y were measured by the Doppler shift attenuation method, and the reduced probabilities for the respective gamma transitions were calculated. Levels of the K{sup π} = +5/2{sup +} and K{sup π} = −7/2{sup +} bands associated with, respectively, prolate and oblate deformation shapes are found in {sup 89}Y at low excitation energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Imaging and Segmenting Grains and Subgrains Using Backscattered Electron Techniques

We present two new methods of processing data from backscattered electron signals in a scanning electron microscope to image grains and subgrains. The first combines data from multiple backscattered electron images acquired at different specimen geometries to (1) better reveal grain boundaries in recrystallized microstructures and (2) distinguish between recrystallized and unrecrystallized regions in partially recrystallized microstructures. The second utilizes spherical harmonic transform indexing of electron backscatter diffraction patterns to produce high angular resolution orientation data that enable the characterization of subgrains. Subgrains are produced during high-temperature plastic deformation and have boundary misorientation angles ranging from a few degrees down to a few hundredths of a degree. Here, we also present an algorithm to automatically segment grains from combined backscattered electron image data or grains and subgrains from high angular resolution electron backscatter diffraction data. Together, these new techniques enable rapid measurements of individual grains and subgrains from large populations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural measurement of electron-phonon coupling and electronic thermal transport across a metal-semiconductor interface

Scattering of energetic charge carriers and their coupling to lattice vibrations (phonons) in dielectric materials and semiconductors are crucial processes that determine the functional limits of optoelectronics, photovoltaics, and photocatalysts. The strength of these energy exchanges is often described by the electron-phonon coupling coefficient, which is difficult to measure due to the microscopic time- and length-scales involved. In the present study, we propose an alternate means to quantify the coupling parameter along with thermal boundary resistance and electron conductivity by performing a high angular-resolution time-resolved X-ray diffraction measurement of propagating lattice deformation following laser excitation of a nanoscale, polycrystalline metal film on a semiconductor substrate. Our data present direct experimental evidence for identifying the ballistic and diffusive transport components occurring at the interface, where only the latter participates in thermal diffusion. This approach provides a robust measurement that can be applied to investigate microscopic energy transport in various solid-state materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A finite micro-rotation material point method for micropolar solid and fluid dynamics with three-dimensional evolving contacts and free surfaces

This paper introduces an explicit material point method designed specifically for simulating the micropolar continuum dynamics in the finite deformation and finite microrotation regime. The material point method enables us to simulate large deformation problems while circumventing the potential mesh distortion without remeshing. To eliminate rotational motion damping and loss of angular momentum during the projection, we introduce the mapping for microinertia and angular momentum between particles and grids through the affine particle-in-cell approach. The microrotation and the curvature at each particle are updated through zero-order forward integration of the microgyration and its spatial gradient. We show that the microinertia and the angular momentum are conserved during the projections between particles and grids in our formulation. We verify the formulation and implementation by comparing with the analytical dispersion relation of micropolar waves under the small strain and small microrotation, as well as the analytical soliton solution for solids undergoing large deformation and large microrotation. Additionally we also demonstrate the capacity of the proposed computational framework to handle a wide spectrum of simulations that exhibit size effects in the geometrical nonlinear regime through three representative numerical examples, i.e., a cantilever beam torsion problem, a fragment-impact penetration problem, and a micropolar fluid discharging problem.

42 ENGINEERING↗
DOE OSTI2019

Diffractive Imaging of C 60 Structural Deformations Induced by Intense Femtosecond Midinfrared Laser Fields

Theoretical studies indicated that C 60 exposed to linearly polarized intense infrared pulses undergoes periodic cage structural distortions with typical periods around 100 fs (1 fs = 10 –15 s). Here, we use the laser-driven self-imaging electron diffraction technique, previously developed for atoms and small molecules, to measure laser-induced deformation of C 60 in an intense 3.6 μm laser field. A prolate molecular elongation along the laser polarization axis is determined to be (6.1 ± 1.4)% via both angular- and energy-resolved measurements of electrons that are released, driven back, and diffracted from the molecule within the same laser field. The observed deformation is confirmed by density functional theory simulations of nuclear dynamics on time-dependent adiabatic states and indicates a nonadiabatic excitation of the h g (1) prolate-oblate mode. Here, the results demonstrate the applicability of laser-driven electron diffraction methods for studying macromolecular structural dynamics in four dimensions with atomic time and spatial resolutions.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Large-amplitude nuclear motion formulated in terms of dissipation of quantum fluctuations

The potential-barrier penetrability and quasi-stationary thermal-decay rate of a metastable state are formulated in terms of microscopic quantum diffusion. Apart from linear coupling in momentum between the collective and internal subsystems, the formalism embraces the more general case of linear couplings in both the momentum and the coordinates. The developed formalism is then used for describing the process of projectile-nucleus capture by a target nucleus at incident energies near and below the Coulomb barrier. The capture partial probability, which determines the cross section for formation of a dinuclear system, is derived in analytical form. The total and partial capture cross sections, mean and root-mean-square angular momenta of the formed dinuclear system, astrophysical -factors, logarithmic derivatives, and barrier distributions are derived for various reactions. Also investigated are the effects of nuclear static deformation and neutron transfer between the interacting nuclei on the capture cross section and its isotopic dependence, and the entrance-channel effects on the capture process. The results of calculations for reactions involving both spherical and deformed nuclei are in good agreement with available experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗