Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin optical element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Optical Analysis of Transparent Polymeric Material Exposed to Simulated Space Environment

Many innovations in spacecraft power and propulsion have been recently tested at NASA, particularly in non-chemical propulsion. One improvement in solar array technology is solar concentration using thin polymer film Fresnel lenses. Weight and cost savings were proven with the Solar Concentrator Arrays with Refractive Linear Element Technology (SCARLET)-II array on NASA's Deep Space I spacecraft. The Fresnel lens concentrates solar energy onto high-efficiency solar cells, decreasing the area of solar cells needed for power. Continued efficiency of this power system relies on the thin film's durability in the space environment and maintaining transmission in the 300 - 1000 nm bandwidth. Various polymeric materials have been tested for use in solar concentrators, including Lexan(TM), polyethylene terephthalate (PET), several formulations of Tefzel(Tm) and Teflon(TM), and DC 93-500, the material selected for SCARLET-II. Also tested were several innovative materials including Langley Research Center's CPI and CP2 polymers and atomic oxygen- resistant polymers developed by Triton Systems, Inc. The Environmental Effects Group of the Marshall Space Flight Center's Materials, Processes, and Manufacturing Department exposed these materials to simulated space environment and evaluated them for any change in optical transmission. Samples were exposed to a minimum of 1000 equivalent Sun hours of near-UV radiation (250 - 400 nm wavelength). Materials that appeared robust after near-UV exposure were then exposed to charged particle radiation equivalent to a five-year dose in geosynchronous orbit. These exposures were performed in MSFC's Combined Environmental Effects Test Chamber, a unique facility with the capability to expose materials simultaneously or sequentially to protons, low-energy electrons, high-energy electrons, near UV radiation and vacuum UV radiation. Reflectance measurements can be made on the samples in vacuum. Prolonged exposure to the space environment will decrease the polymer film's transmission and thus reduce the conversion efficiency. A method was developed to normalize the transmission loss and thus rank the materials according to their tolerance to space environmental exposure. Spectral results and the material ranking according to transmission loss are presented.

Edwards, David L.↗

Local atomic structure and lattice defect analysis in heavily Co-doped ZnS thin films using X-ray absorption fine structure spectroscopy

Iin this work, X-ray absorption fine structure (XAFS) spectroscopy was used to address both the local atomic structure and the local electronic structure around Zn, Co, and S in Co-doped ZnS thin films. X-ray absorption near-edge spectroscopy (XANES) revealed changes in the strong pre-edge feature of the S K-edge spectra that depend on the Co concentration and are related to atomic bound-state transitions through hybridization between $3d$ transition metal and $sp$ host semiconductor electronic states. These changes reveal intrinsic effects, such as S vacancies and dopant effects. From the Co K-edge XANES spectra, substitution of Co 2+ into ZnS is observed. The local atomic structure around the dopant, obtained by XAFS spectroscopy, indicates a reduction of the Co–S bond length. Optical analysis shows deep absorption centers or intermediate states in the bandgap, ascribed to $d$-$d$ transitions in the Co atoms that modify the electronic band structure and cause a decrease in the bandgap as a function of Co concentration. This work provides direct evidence of dopant effects in heavily Co-doped ZnS, including bond distances and Debye-Waller factors, providing key elements to generate a realistic atomic structural model, which is crucial to understand the observed electronic properties of this material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic Layer Deposited Al{sub 2}O{sub 3} as Characterized Reference Samples for Nanolayer Metrology

Plasma assisted Atomic Layer Deposition Al{sub 2}O{sub 3} samples were studied using an approach of complementary metrology using Ellipsometry, X-Ray Reflectivity, Atomic Force Microscopy, and Total Reflection X-Ray Fluorescence. For modeling the samples, an interfacial rough SiO{sub 2} layer has to be assumed. The excellent linearity of the ALD process was used to cross check Ellipsometry and X-Ray Reflectivity. In contrast to Ellipsometry, X-Ray Reflectivity showed a residual surface layer, identified as chlorine contaminated layer by TXRF. The samples are shown to be ideal candidates for calibration of X-ray fluorescence as the Al signal linearly depends on the film thickness or ALD cycles. Furthermore, the impact of self-absorption of thick layers for TXRF was shown by the samples.

36 MATERIALS SCIENCE↗

Determination of a brass alloy concentration composition using calibration-free laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy (LIBS) is a technique that can provide qualitative and quantitative measurements of the characteristics of irradiated metals. In the present work, we have calculated the parameters of the plasma produced from a brass alloy sample under the action of a pulsed Nd: YAG laser operating at 1064 nm. The emission lines of copper atoms (Cu I), zinc atoms (Zn I), and lead atoms (Pb I), which are elements of a brass alloy composition, were used to investigate the parameters of the brass plasma. The spectral profiles of Cu, Zn, and Pb lines have been used to extract the electron temperature and density of the brass alloy plasma. The characteristics of Cu, Zn, and Pb were determined quantatively by the calibration-free LIBS (CF-LIBS) method considering for accurate analysis that the laser-induced ablated plasma is optically thin in local thermodynamic equilibrium conditions and the plasma ablation is stoichiometric. The Boltzmann plot method was used to evaluate the plasma temperature, and the Stark broadened profiles were used to determine the electron density. An algorithm based on the experimentally measured values of the intensity of spectral lines and the basic laws of plasma physics was developed for the determination of Cu, Zn, and Pb concentrations in the brass sample. The concentrations C{sub CF-LIBS} calculated by CF-LIBS and the certified concentrations C{sub certified} were very close.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnosing on plasma plume from xenon Hall thruster with collisional-radiative model

The collisional-radiative model for xenon is used to calculate the electron density and temperature, and the atom population distribution in the plasma plume from a xenon Hall thruster. In the calculation, 173 levels of atom population are considered; only the processes of electron induced excitation and deexcitation, and spontaneous decay are simulated. The plasma plume is assumed to be optically thin. Consequently, the reasonable parameters of plasma plume along the outside center line of the thruster channel are obtained by making the calculated emission spectrum corresponding to measured ones and based on the atomic data available on site and by codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties of Cu(In,Ga,Al)Se{sub 2} thin films fabricated by magnetron sputtering

Cu(In,Ga,Al)Se{sub 2} (CIGAS) thin films were studied as an alternative absorber layer material to Cu(In{sub x}Ga{sub 1−x})Se{sub 2}. CIGAS thin films with varying Al content were prepared by magnetron sputtering on Si(100) and soda-lime glass substrates at 350 °C, followed by postdeposition annealing at 520 °C for 5 h in vacuum. The film composition was measured by an electron probe microanalyzer while the elemental depth profiles were determined by secondary ion mass spectrometry. X-ray diffraction studies indicated that CIGAS films are single phase with chalcopyrite structure and that the (112) peak clearly shifts to higher 2θ values with increasing Al content. Scanning electron microscopy images revealed dense and well-defined grains, as well as sharp CIGAS/Si(100) interfaces for all films. Atomic force microscopy analysis indicated that the roughness of CIGAS films decreases with increasing Al content. The bandgap of CIGAS films was determined from the optical transmittance and reflectance spectra and was found to increase as Al content increased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of elastic anisotropy on thermally induced distortions of a laser beam in single cubic syngony crystals with radial cooling. Part I

We have studied thermally induced distortions of a beam in single cubic syngony crystals of all symmetry groups with an anisotropic elastic stiffness tensor. The arithmetic mean and the difference between the thermally induced phase incursions of eigenpolarisations, as well as the angle of incidence of these polarisations, are calculated for a long rod and a thin disk with radial cooling under uniform volume pumping of the active element. The position of the specific crystal orientations unrelated to its symmetry elements is investigated. The effective values of the thermo-optical constant Q in two specific orientations, as well as the thermo-optical constant P in an arbitrary orientation, are found. (invited paper)

36 MATERIALS SCIENCE↗

High-Throughput Characterization of (Fe x Co 1–x ) 3 O 4 Thin-Film Composition Spreads

In this study, thin-film continuous composition spreads of Fe–Co–O were fabricated by reactive cosputtering from elemental Fe and Co targets in reactive Ar/O 2 atmosphere using deposition temperatures ranging from 300 to 700 °C. Fused silica and platinized Si/SiO 2 strips were used as substrates. Ti and Ta were investigated as adhesion layer for Pt and the fabrication of the Fe–Co–O films. The thin-film composition spreads were characterized by high-throughput electron-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy, scanning electron microscopy, and optical transmission spectroscopy. The Fe-content ranged from 28 to 72 at. %. The spinel phases Fe 2 CoO 4 and FeCo 2 O 4 could be synthesized and stabilized at all deposition temperatures with a continuous variation in spinel composition in between. The dependence of the film surface microstructure on the deposition temperature and the composition was mapped. Moreover, the band gap values, ranging from 2.41 eV for FeCo 2 O 4 to 2.74 eV for Fe 2 CoO 4 , show a continuous variation with the composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functionally grading the shape memory response in NiTi films: Laser irradiation

A new process and mechanism are presented for controlling the shape memory response spatially within monolithic NiTi thin film structures. This technique is shown to effectively control the martensitic phase transformation temperature and exhibits control over aspects of the mechanical and shape memory responses as well. Specifically, the martensitic phase transformation temperature decreases with incident laser energy density. Concomitant modifications are observed in both the mechanical and shape memory responses in laser processed films. Analysis and characterization are performed via temperature controlled optical microscopy, x-ray diffraction, atomic force microscopy, and nanoindentation.

36 MATERIALS SCIENCE↗

Structural, Morphological and Optical properties of Sputtered Nickel oxide Thin Films

Nickel oxide (NiO) thin films have been deposited by dc reactive magnetron sputtering technique on glass substrates at various substrate temperatures in the range of 303 to 723 K. The influence of substrate temperature on structural, morphological, compositional and optical properties was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive spectroscopy (EDS) and spectrophotometer studies. The structural properties of the films were strongly influenced by the substrate temperature. From the microstructural studies, fine and uniform grains were grown with RMS roughness of 9.4 nm at substrate temperature of 523 K. The optical results indicated that the optical transmittance of the films increases with increasing substrate temperature up to 523 K, thereafter decreases. The optical band of the films increases with substrate temperature initially, thereafter decreased at higher temperatures. The Highest optical transmittance of 60 % and optical band gap of 3.82 eV was observed in the present study.

36 MATERIALS SCIENCE↗

Structuring by field enhancement of glass, Ag, Au, and Co thin films using short pulse laser ablation

Single pulse laser ablation of glass, Ag, Au, and Co thin films was experimentally investigated with a laser pulse width of 400 ps at a wavelength of 532 nm both in the far and near fields. In the far-field regime, the electromagnetic field results from a focused laser beam, while the near-field regime is realized by a combination of the focused laser beam incident on a spherical colloidal particle. For the near-field experiments we have used polystyrene colloidal particles of 700 nm diameter self-assembled or spin coated on top of the surfaces. Laser fluences applied are in the range of 0.01-10 J/cm{sup 2}. The diameter and the morphologies of the ablated holes were investigated by optical microscopy, profilometry, scanning electron microscopy, and atomic force microscopy. The dependence of the shape of the holes reflects the fluence regime and the thermophysical properties, i.e., melting temperature and thermal diffusivity of the surfaces involved in the experiments. We give quantitative data about the fluence threshold, diameter, and depth ablation dependence for the far and near fields and discuss their values with respect to the enhancement factor of the intensity of the electromagnetic field due to the use of the colloidal particles. Theoretical estimations of the intensity enhancement were done using the finite-difference time-domain method by using the RSOFT software. The application of near fields allows structuring of the surfaces with structure dimension in the order of 100 nm and even below.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Temperature dependence of emission measure in solar X-ray plasmas. 1: Non-flaring active regions

X-ray and ultraviolet line emission from hot, optically thin material forming coronal active regions on the sun may be described in terms of an emission measure distribution function, Phi (T). A relationship is developed between line flux and Phi (T), a theory which assumes that the electron density is a single-valued function of temperature. The sources of error involved in deriving Phi (T) from a set of line fluxes are examined in some detail. These include errors in atomic data (collisional excitation rates, assessment of other mechanisms for populating excited states of transitions, element abundances, ion concentrations, oscillator strengths) and errors in observed line fluxes arising from poorly - known instrumental responses. Two previous analyses are discussed in which Phi (T) for a non-flaring active region is derived. A least squares method of Batstone uses X-ray data of low statistical significance, a fact which appears to influence the results considerably. Two methods for finding Phi (T) ab initio are developed. The coefficients are evaluated by least squares. These two methods should have application not only to active-region plasmas, but also to hot, flare-produced plasmas.

Phillips, K. J. H.↗

Spectroscopic Determination of the Physical Conditions in Hot, Optically Thin Sources

This annual report covers the period from Oct 1, 2000 to Sep 30, 2001. The Astrophysics Plasma Emission Code and Database (APEC/APED), developed in part under this grant, have been upgraded to Version 1.1 and are now beginning to be used outside our research group in applications to X-ray spectral data from Chandra and XMM-Newton. These models represent the best theoretical data currently available and are reasonably complete below about 30 angstroms. Stellar coronae are being used to benchmark the atomic data in APED as part of the Emission Line Project. Initial results suggest that the models for most of the strongest lines are in good agreement with the observations, including the H-like and He-like emission from dominant elements and the Fe L shell emission, both near 1 keV and in the extreme ultraviolet near 100 eV. At this point in time, we define 'good agreement' at the level of accuracy expected from the atomic physics, approximately 20-30%. In order to benchmark the spectral models beyond the canonical theoretical accuracy, we are working closely with the Chandra gratings calibration group to ensure that we are using the optimal calibration, primarily effective areas and line response functions.

Brickhouse, N.↗

Estimation of electron–phonon coupling and Urbach energy in group-I elements doped ZnO nanoparticles and thin films by sol–gel method

Highlights: • Comparison of group-I elements doped ZnO nanoparticles and thin films. • Calculation of electron–phonon coupling and phonon lifetime from Raman spectroscopy. • Estimation of interband states from Urbach energy. - Abstract: Group-I (Li, Na, K & Cs) elements doped ZnO nanoparticles (NPs) and thin films were prepared using sol–gel method. XRD data and TEM images confirm the absence of any other secondary phase different from wurtzite type ZnO. Spherical shapes of grains are observed from the surfaces of doped ZnO films by atomic force microscope images (AFM) and presences of dopants are confirmed from energy dispersive X-ray spectra. The Raman active E{sub 2} (high), E{sub 2} (low), E{sub 1} and A{sub 1} (LO) modes are observed from both ZnO NPs and thin films. First-order longitudinal optical (LO) phonon is found to have contributions from direct band transition and localized excitons. Electron–phonon coupling, phonon lifetime and deformation energy of ZnO are calculated based on the effect of dopants with respect to the multiple Raman LO phonon scattering. Presence of localized interbands states in doped ZnO NPs and thin films are found from the Urbach energy calculations.

36 MATERIALS SCIENCE↗

Structure and Optical properties of RF-Sputtered Mn-ZnO Nanocrystalline Thin Films

Zn{sub 0.95}Mn{sub 0.05}O thin films were deposited on quartz substrates by radio-frequency magnetron sputtering using ceramic target in pure oxygen gas environment.. The X-ray diffraction and atomic force microscopy (AFM) studies reveal the nanocrysttalline nature of the films. The average grain size of the film is found to increase with increase in process gas pressure. The optical transmission spectra show the films to be highly transparent (80-95%).The direct energy band gap of film decreases from 3.04-2.92 eV with the increase in working gas pressure.

36 MATERIALS SCIENCE↗

Nonlinear refraction properties of nickel oxide thin films at 800 nm

Measurements of the nonlinear refractive index, n{sub 2}, of nickel oxide films prepared by controlled oxidation of nickel films deposited on substrates of soda-lime glass are reported. The structure and morphology of the samples were characterized by scanning electron microscopy, atomic force microscopy, and x-ray diffractometry. Samples of excellent optical quality were prepared. The nonlinear measurements were performed using the thermally managed eclipse Z-scan technique at 800 nm. A large value of n{sub 2}approx =10{sup -12} cm{sup 2}/W and negligible nonlinear absorption were obtained.

36 MATERIALS SCIENCE↗

Spin–orbit effects on the electronic and optical properties of lead iodide

Lead iodide (PbI2) has gained much interest due to its direct electronic gap in the visible range and layered crystal structure. It has thereby been considered as a promising material for applications in atomically thin optoelectronic devices. In this work, we present a detailed investigation of the effect of spin–orbit coupling (SOC) that arises from the presence of heavy atoms on the electronic and optical properties of PbI2 using first-principles calculations based on density-functional theory and many-body perturbation theory. We find that SOC not only alters the bandgap but also induces the mixing of orbital characters, resulting in a significant change in the overall band structure and charge carrier effective masses. Moreover, the band orbital mixing caused by SOC results in the dramatic change in optical transition matrix elements and, correspondingly, the absorption spectrum. Our experimentally measured absorption spectra validate the calculation results and demonstrate the importance of SOC in the optical processes of PbI2. Our findings provide insights that are important for the potential use of PbI2 as a material platform for visible optoelectronic devices.

Physics↗

Production of cyclo-hafnium metal–organic thin film using a specific method

Cyclo-hafnium metal–organic thin film was successfully synthesized and deposited on amorphous glass using a specific method, where amorphous substrate was used for synthesis and coating. Then, the film was annealed at 300 °C in an oven (ambient conditions). Optical and structural properties of the films were also investigated within the study. The structure of the film was analyzed using the mid-infrared spectrum. Optical properties were investigated via the UV–Vis spectroscopic technique. Film thickness was measured with AFM (tapping mode). Surface properties and elemental ratio of the films were examined and measured with SEM and EDX analysis. The highest transmittance and lowest reflectance values within the visible range were identified. The characteristic triethanolamine and hafnium-oxide peaks were observed in the infrared spectrum. FIR spectra of the films were found to be in accordance with the literature. SEM images of the films revealed that the surface of the films is fragile. EDX analysis of hafnium, organic parts of the compound and some minerals of amorphous glass were shown.

36 MATERIALS SCIENCE↗