Search NASA⌕ Search

SEARCH · Search NASA

Results for “avoided emissions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The Impact of Geoengineering Aerosols on Stratospheric Temperature and Ozone

Anthropogenic greenhouse gas emissions are warming the global climate at an unprecedented rate. Significant emission reductions will be required soon to avoid a rapid temperature rise. As a potential interim measure to avoid extreme temperature increase, it has been suggested that Earth's albedo be increased by artificially enhancing stratospheric sulfate aerosols. We use a 3D chemistry climate model, fed by aerosol size distributions from a zonal mean aerosol model, to simulate continuous injection of 1-10 Mt/a into the lower tropical stratosphere. In contrast to the case for all previous work, the particles are predicted to grow to larger sizes than are observed after volcanic eruptions. The reason is the continuous supply of sulfuric acid and hence freshly formed small aerosol particles, which enhance the formation of large aerosol particles by coagulation and, to a lesser extent, by condensation. Owing to their large size, these particles have a reduced albedo. Furthermore, their sedimentation results in a non-linear relationship between stratospheric aerosol burden and annual injection, leading to a reduction of the targeted cooling. More importantly, the sedimenting particles heat the tropical cold point tropopause and, hence, the stratospheric entry mixing ratio of H2O increases. Therefore, geoengineering by means of sulfate aerosols is predicted to accelerate the hydroxyl catalyzed ozone destruction cycles and cause a significant depletion of the ozone layer even though future halogen concentrations will be significantly reduced.

Heckendorn, P.↗

The Impact of Geoengineering Aerosols on Stratospheric Temperature and Ozone

Anthropogenic greenhouse gas emissions are warming the global climate at an unprecedented rate. Significant emission reductions will be required soon to avoid a rapid temperature rise. As a potential interim measure to avoid extreme temperature increase, it has been suggested that Earth's albedo be increased by artificially enhancing stratospheric sulfate aerosols. We use a 3D chemistry climate model, fed by aerosol size distributions from a zonal mean aerosol model. to simulate continuous injection of 1-10 Mt/a into the lower tropical stratosphere. In contrast to the case for all previous work, the particles are predicted to grow to larger sizes than are observed after volcanic eruptions. The reason is the continuous supply of sulfuric acid and hence freshly formed small aerosol particles, which enhance the formation of large aerosol particles by coagulation and, to a lesser extent, by condensation. Owing to their large size, these particles have a reduced albedo. Furthermore, their sedimentation results in a non-linear relationship between stratospheric aerosol burden and annual injection, leading to a reduction of the targeted cooling. More importantly, the sedimenting particles heat the tropical cold point tropopause and, hence, the stratospheric entry mixing ratio of H2O increases. Therefore, geoengineering by means of sulfate aerosols is predicted to accelerate the hydroxyl catalyzed ozone destruction cycles and cause a significant depletion of the ozone layer even though future halogen concentrations will he significantly reduced.

Heckendorn, P.↗

Challenges and opportunities for enhancing food security and greenhouse gas mitigation in smallholder farming in sub-Saharan Africa. A review

Smallholder farmers struggle to achieve food security in many countries of sub-Saharan Africa (SSA). It is urgently required to find appropriate practices for enhancing crop production while avoiding large increases in greenhouse gas (GHG) emissions in SSA. This review aims to identify common smallholder farming practices for enhancing crop production, to assess how these affect GHG emissions and to identify strategies that not only enhance crop production but also mitigate GHG emissions in SSA. To increase crop production and ensure food security, smallholder farmers usually expand agricultural land, develop water harvesting and irrigation techniques and increase cropping intensity and fertilizer use. These practices may result in changing carbon stocks and GHG emissions, potentially creating trade-offs between food security and GHG mitigation. Agricultural land expansion at the expense of forests is the most dominant source of GHG emissions in SSA. While water harvesting and irrigation can increase soil organic carbon, they can trigger GHG emissions. Increasing cropping intensity can enhance the decomposition of soil organic matter, thus releasing carbon dioxide. Increasing nitrogen fertilizer use can enhance soil organic carbon, but also leads to increasing nitrous oxide emissions. An integrated land, water and nutrient management strategy is necessary to enhance crop production and mitigate GHG emissions. Among the most relevant strategies found, agroforestry practices in degraded and marginal lands could replace expanding agricultural croplands. In addition, water management, via adequate rainwater harvesting and irrigation techniques, together with appropriate nutrient management should be considered. Therefore, a land-water-nutrient nexus (LWNN) approach will enable an integrated and sustainable solution to increasing crop production and mitigating GHG emissions. Various technical, economic and policy barriers hinder implementing the LWNN approach on the ground, but these may be overcome through developing appropriate technologies, disseminating them through farmer to farmer approaches and developing specific policies to address smallholder land tenure issues and motivate long-term investment.

Sub-Sahara Africa↗

Exploratory Contrail Studies: Transonic Truss-Braced Wing (TTBW) Contrail Assessment & National Airspace System (NAS) Impacts from Contrail Avoidance

Aviation is projected to become an increasingly large contributor to greenhouse gas emissions. Condensation trails (contrails) are visible cloud trails of water vapor made from aircraft engine exhaust. One study estimated that persistent contrails have contributed about 57% of total Effective Radiative Forcing from aviation operations. Airspace management can reduce persistent contrails and related climate change impacts. NAS Digital Twin simulation capability and Autoresolver conflict management service can be utilized to investigate persistent contrail formation avoidance. On three of the four days analyzed, TTBW persistent contrail formation length was about 10 percentage points less than Boeing 737-800 (around 3% vs 13%). On average, altitude change maneuvers in simulation reduced persistent contrail formation length by 69.8% for 0.4% increase in fuel burn and 1.2% increase in flight duration.

persistent contrails↗

Emission line galaxies in a narrow strip toward Perseus

Many studies have suggested that emission line galaxies (ELG's) have spatial distributions that differ from non-emission line galaxies. The ELG's tend to avoid rich clusters and may sometimes reside within voids. This paper describes work in progress on a redshift survey aimed both at determining the angular extent of the structures detected in deep pencil beam survey and at studying the characteristics of galaxies with respect to the rest of the sample.

Ellman, Nancy E.↗

Common Methodology for Efficient Airspace Operations

Topics include: a) Developing a common methodology to model and avoid disturbances affecting airspace. b) Integrated contrails and emission models to a national level airspace simulation. c) Developed capability to visualize, evaluate technology and alternate operational concepts and provide inputs for policy-analysis tools to reduce the impact of aviation on the environment. d) Collaborating with Volpe Research Center, NOAA and DLR to leverage expertise and tools in aircraft emissions and weather/climate modeling. Airspace operations is a trade-off balancing safety, capacity, efficiency and environmental considerations. Ideal flight: Unimpeded wind optimal route with optimal climb and descent. Operations degraded due to reduction in airport and airspace capacity caused by inefficient procedures and disturbances.

Sridhar, Banavar↗

The Effect of Future Ambient Air Pollution on Human Premature Mortality to 2100 Using Output from the ACCMIP Model Ensemble

Ambient air pollution from ground-level ozone and fine particulate matter (PM(sub 2.5)) is associated with premature mortality. Future concentrations of these air pollutants will be driven by natural and anthropogenic emissions and by climate change. Using anthropogenic and biomass burning emissions projected in the four Representative Concentration Pathway scenarios (RCPs), the ACCMIP ensemble of chemistry climate models simulated future concentrations of ozone and PM(sub 2.5) at selected decades between 2000 and 2100. We use output from the ACCMIP ensemble, together with projections of future population and baseline mortality rates, to quantify the human premature mortality impacts of future ambient air pollution. Future air-pollution-related premature mortality in 2030, 2050 and 2100 is estimated for each scenario and for each model using a health impact function based on changes in concentrations of ozone and PM(sub 2.5) relative to 2000 and projected future population and baseline mortality rates. Additionally, the global mortality burden of ozone and PM(sub 2.5) in 2000 and each future period is estimated relative to 1850 concentrations, using present-day and future population and baseline mortality rates. The change in future ozone concentrations relative to 2000 is associated with excess global premature mortality in some scenarios/periods, particularly in RCP8.5 in 2100 (316 thousand deaths per year), likely driven by the large increase in methane emissions and by the net effect of climate change projected in this scenario, but it leads to considerable avoided premature mortality for the three other RCPs. However, the global mortality burden of ozone markedly increases from 382000 (121000 to 728000) deaths per year in 2000 to between 1.09 and 2.36 million deaths per year in 2100, across RCPs, mostly due to the effect of increases in population and baseline mortality rates. PM(sub 2.5) concentrations decrease relative to 2000 in all scenarios, due to projected reductions in emissions, and are associated with avoided premature mortality, particularly in 2100: between 2.39 and 1.31 million deaths per year for the four RCPs. The global mortality burden of PM(sub 2.5) is estimated to decrease from 1.70 (1.30 to 2.10) million deaths per year in 2000 to between 0.95 and 1.55 million deaths per year in 2100 for the four RCPs due to the combined effect of decreases in PM(sub 2.5) concentrations and changes in population and baseline mortality rates. Trends in future air-pollution-related mortality vary regionally across scenarios, reflecting assumptions for economic growth and air pollution control specific to each RCP and region. Mortality estimates differ among chemistry climate models due to differences in simulated pollutant concentrations, which is the greatest contributor to overall mortality uncertainty for most cases assessed here, supporting the use of model ensembles to characterize uncertainty. Increases in exposed population and baseline mortality rates of respiratory diseases magnify the impact on premature mortality of changes in future air pollutant concentrations and explain why the future global mortality burden of air pollution can exceed the current burden, even where air pollutant concentrations decrease.

Silva, Raquel A.↗

Searching for Lyman alpha emission from a possible Zel'dovich pancake

The detection of 2 x 10(exp 14) solar mass of neutral hydrogen at a redshift of 3.397 has been reported. Top-down theories of structure formation predict such a mass of hydrogen collapsing to form a protocluster of galaxies. We sought to observe this object in Lyman-alpha, which could be produced through ionization by the metagalactic ionizing radiation field or through internal ionization processes. On 29 Apr. 1992, the region of the reported HI emission for 1800 seconds with the 1.3 meter McGraw-Hill reflector at Michigan-Dartmouth-M.I.T. Observatory was observed. Because the H1 emission reported has a transverse scale of 300 sec, a 1/3.06 reducing camera and a Thomson CCD were used to obtain a field of view of about 600 sec by 840 sec. A filter 88 A wide, centered at 5354 A was used; Lyman-alpha emission at z = 3.4 is redshifted to 5347 A. In order to avoid saturating the CCD with a bright star in the field, nine 200 second exposures were taken. The combination of these images shows no obvious extended Lyman-alpha emission at a level of about 28 magnitudes per square arcsecond. The field observed also shows a distant cluster of galaxies. In order to determine if the cluster could in any way be associated with the cloud of neutral hydrogen at z = 3.4, we sought to estimate its redshift from the size and magnitude of the galaxies and of the cluster as a whole. Omega = 1 and H(sub O) = 50 km s(sup -1) Mpc(sup -1) were adopted; our redshift estimates range from z = 0.2 to z = 0.6. The cluster is clearly not associated with the HI cloud at z = 3.4.

Cox, Caroline↗

Non-OH Chemistry in Oxidation Flow Reactors for the Study of Atmospheric Chemistry Systematically Examined by Modeling

Oxidation flow reactors (OFRs) using low-pressure Hg lamp emission at 185 and 254 nm produce OH radicals efficiently and are widely used in atmospheric chemistry and other fields. However, knowledge of detailed OFR chemistry is limited, allowing speculation in the literature about whether some non-OH reactants, including several not relevant for tropospheric chemistry, may play an important role in these OFRs. These non-OH reactants are UV radiation, O(1D), O(3P), and O3. In this study, we investigate the relative importance of other reactants to OH for the fate of reactant species in OFR under a wide range of conditions via box modeling. The relative importance of non-OH species is less sensitive to UV light intensity than to relative humidity (RH) and external OH reactivity (OHRext), as both non-OH reactants and OH scale roughly proportional to UV intensity. We show that for field studies in forested regions and also the urban area of Los Angeles, reactants of atmospheric interest are predominantly consumed by OH. We find that O(1D), O(3P), and O3 have relative contributions to VOC consumption that are similar or lower than in the troposphere. The impact of O atoms can be neglected under most conditions in both OFR and troposphere. Under pathological OFR conditions of low RH and/or high OHRext, the importance of non-OH reactants is enhanced because OH is suppressed. Some biogenics can have substantial destructions by O3, and photolysis at non-tropospheric wavelengths (185 and 254 nm) may also play a significant role in the degradation of some aromatics under pathological conditions. Working under low O2 with the OFR185 mode allows OH to completely dominate over O3 reactions even for the biogenic species most reactive with O3. Non-tropospheric VOC photolysis may have been a problem in some laboratory and source studies, but can be avoided or lessened in future studies by diluting source emissions and working at lower precursor concentrations in lab studies, and by humidification. SOA photolysis is shown to be insignificant for most functional groups, except for nitrates and especially aromatics, which may be photolyzed at high UV flux settings. Our work further establishes the OFR's usefulness as a tool to study atmospheric chemistry and enables better experiment design and interpretation, as well as improved future reactor design.

Peng, Zhe↗

Non-OH Chemistry in Oxidation Flow Reactors for the Study of Atmospheric Chemistry Systematically Examined by Modeling

Oxidation flow reactors (OFRs) using low-pressure Hg lamp emission at 185 and 254 nm produce OH radicals efficiently and are widely used in atmospheric chemistry and other fields. However, knowledge of detailed OFR chemistry is limited, allowing speculation in the literature about whether some non-OH reactants, including several not relevant for tropospheric chemistry, may play an important role in these OFRs. These non-OH reactants are UV radiation, O(1D), O(3P), and O3. In this study, we investigate the relative importance of other reactants to OH for the fate of reactant species in OFR under a wide range of conditions via box modeling. The relative importance of non-OH species is less sensitive to UV light intensity than to relative humidity (RH) and external OH reactivity (OHRext), as both non-OH reactants and OH scale roughly proportional to UV intensity. We show that for field studies in forested regions and also the urban area of Los Angeles, reactants of atmospheric interest are predominantly consumed by OH. We find that O(1D), O(3P), and O3 have relative contributions to VOC consumption that are similar or lower than in the troposphere. The impact of O atoms can be neglected under most conditions in both OFR and troposphere. Under pathological OFR conditions of low RH and/or high OHRext, the importance of non-OH reactants is enhanced because OH is suppressed. Some biogenics can have substantial destructions by O3, and photolysis at non-tropospheric wavelengths (185 and 254 nm) may also play a significant role in the degradation of some aromatics under pathological conditions. Working under low O2 with the OFR185 mode allows OH to completely dominate over O3 reactions even for the biogenic species most reactive with O3. Non-tropospheric VOC photolysis may have been a problem in some laboratory and source studies, but can be avoided or lessened in future studies by diluting source emissions and working at lower precursor concentrations in lab studies, and by humidification. SOA photolysis is shown to be insignificant for most functional groups, except for nitrates and especially aromatics, which may be photolyzed at high UV flux settings. Our work further establishes the OFR's usefulness as a tool to study atmospheric chemistry and enables better experiment design and interpretation, as well as improved future reactor design.

Peng, Zhe↗

Space and time resolved emission of hard X-rays from a plasma focus

The X-ray emission from focused plasmas was observed with an image converter camera in the streak and framing modes. Use of a very high gain image intensifier enabled weak hard X-ray emission (above 25 keV) to be recorded. The use of an admixture of higher atomic number into the deuterium was avoided, and the role of the vapor from the anode surface could be discerned. The recorded bremsstrahlung emission seemed to be from a metallic plasma of copper released from the anode surface by bombardment from an intense electron beam. The intensity of emission was determined by the density of copper and the density and energy of the electron beam. The main emission recorded occurred several 100 nsec after the focus was over, which implies that the electric fields driving the beam existed for this duration. It is suggested that the fields were created by annihilation of magnetic flux for a time much longer than the focus duration.

Harries, W. L.↗

The composition of Martian aeolian sands: Thermal emissivity from Viking IRTM observations

Aeolian sands provide excellent surfaces for the remote determination of the mineralogic composition of Martian materials, because such deposits consist of relatively well-sorted, uniform particle sizes and might consist of chemically unaltered, primary mineral grains derived from bedrock. Dark features on the floors of Martian craters are controlled by aeolian processes and many consist largely of unconsolidated, windblown sand. Measurement of the thermal emissivity of geologic materials provides a way to identify mid-infrared absorption bands, the strength and positions of which vary with mineral structure and composition. The Viking Infrared Thermal Mapper (IRTM) had four surface-sensing mid-IR bands, three of which, the 7, 9, and 11 micron channels, correspond to absorption features characteristic of carbonates, sialic, and mafic minerals, respectively. In this study, the highest quality IRTM data were constrained so as to avoid the effects of atmospheric dust, clouds, surface frosts, and particle size variations (the latter using data obtained between 7 and 9 H, and they were selected for dark intracrater features such that only data taken directly from the dark feature were used, so as to avoid thermal contributions from adjacent but unrelated materials. Three-point emissivity spectra of Martian dart intracrater features were compared with laboratory emission spectra of minerals and terrestrial aeolian sands convolved using the IRTM response function to the four IRTM spectral channels.

Edgett, Kenneth S.↗

A Space-Based Observational Strategy for Characterizing the First Stars and Galaxies Using the Redshifted 21cm Global Spectrum

The redshifted 21 cm monopole is expected to be a powerful probe of the epoch of the first stars and galaxies(10 less than z less than 35). The global 21 cm signal is sensitive to the thermal and ionization state of hydrogen gas and thusprovides a tracer of sources of energetic photonsprimarily hot stars and accreting black holeswhich ionize andheat the high redshift intergalactic medium (IGM). This paper presents a strategy for observations of the globalspectrum with a realizable instrument placed in a low-altitude lunar orbit, performing night-time 40120 MHzspectral observations, while on the farside to avoid terrestrial radio frequency interference, ionospheric corruption,and solar radio emissions. The frequency structure, uniformity over large scales, and unpolarized state of theredshifted 21 cm spectrum are distinct from the spectrally featureless, spatially varying, and polarized emissionfrom the bright foregrounds. This allows a clean separation between the primordial signal and foregrounds. Forsignal extraction, we model the foreground, instrument, and 21 cm spectrum with eigenmodes calculated viaSingular Value Decomposition analyses. Using a Markov Chain Monte Carlo algorithm to explore the parameterspace defined by the coefficients associated with these modes, we illustrate how the spectrum can be measured andhow astrophysical parameters (e.g., IGM properties, first star characteristics) can be constrained in the presence offoregrounds using the Dark Ages Radio Explorer (DARE).

Burns, Jack O.↗

Improving Regional Air Quality Forecasting Through Chemical Data Assimilation and Dynamic Emissions Adjustment

Poor air quality (AQ) is one of the most important human-health and environmental problems facing the United States (US). In addition to the detrimental impacts on human- and environmental-health, poor AQ has an economic cost of ~5% of the US gross domestic product (~$790 billion). AQ managers use AQ analyses and modeling to better understand, anticipate, and avoid poor AQ events. Our research focuses on improving AQ analysis/forecast skill, predictability, and emission estimates through improved and more efficient: (i) modeling and data assimilation strategies; (ii) dynamic emissions adjustment strategies; and (iii) use of satellite remote-sensing Earth observations (e.g., MOPITT, IASI, MODIS, OMI, TROPOMI, TEMPO, etc.). This seminar will review: (i) regional chemical weather forecasting/data assimilation with dynamic emissions adjustment with WRF-Chem/DART; (ii) strategies for efficiently assimilating satellite retrieval profiles with ‘compact phase space retrievals’ (CPSRs); (iii) results from joint assimilation of multiple satellite retrievals at medium (12 km × 12 km) and high (4 km × 4 km) spatial resolutions; and (iv) results from observing system simulation experiments (OSSEs) to investigate whether we can recover COVID-period anthropogenic emissions by assimilating synthetic TEMPO NO2 tropospheric column retrievals with dynamic emissions adjustment. Biographical Sketch: Dr. Mizzi is a Senior Research Fellow working and Dr. Johnson at the NASA Ames Research Center. He holds BA and MS degrees in Environmental Science from the University of Virginia, MS and PhD degrees in Applied Mathematics from the University of Colorado at Boulder (CUB), and a JD degree (with an emphasis in Environmental Law) from the University of Colorado School of Law. He worked at the National Center for Atmospheric Research for nearly 25 years on global atmospheric modeling, dynamic and physical initialization, regional hybrid data assimilation, and most recently on regional chemical data assimilation. He also worked as an environmental attorney and consultant for nearly 15 years. He is an expert in numerical modeling and is recognized internationally as a leading expert in regional, chemical data assimilation with dynamic emissions adjustment. Dr. Mizzi became affiliated with NASA Ames in March 2020 to work on improving AQ analysis/forecast skill, predictability, and ‘top-down’ emissions adjustment though the assimilation of Earth observations. An emphasis of his current work is developing methods for assimilating synthetic TEMPO retrievals to quantify the expected benefits of TEMPO relative to existing AQ observations.

Arthur P. Mizzi↗

No Need to Wait for the Clean Air Dividend

Controlling smog and soot is the classic win-win situation, so it's great that the world is finally waking up to the idea. WHAT if there was a way to simultaneously slow down climate change, save millions of lives, improve crop yields and contribute to sustainable development and energy security? It sounds too good to be true, but it is possible. It won't be free or easy, but with some effort and moderate investment, it can be done. The way to do it is to reduce emissions leading to two types of pollution: black carbon and ozone. These are the only pollutants that we know contribute to both global warming and poor air quality. Black carbon is essentially soot, emitted from incomplete combustion of fossil fuels and biomass. It warms the climate in two ways: by absorbing heat in the atmosphere - similar to the greenhouse effect - and by reducing Earth's albedo, or ability to reflect sunlight. Inhaled into the lungs, it leads to cancer and cardiovascular disease. Ozone in the atmosphere also acts as a greenhouse gas, while ground-level ozone is toxic to humans and plants, so leads to both premature death and reduced crop yields. Ozone is not emitted directly but is produced by the action of sunlight on other pollutants, which are known as ozone precursors. Since black carbon and ozone are important components of soot and smog, a great deal of effort has already been put into developing methods to reduce emissions. So effective technology is available, but needs wider implementation. The recommended control measures for black carbon include widespread and tight emission standards on diesel cars and trucks; improved solid fuel cooking stoves, brick kilns and coke ovens in the developing world; and a ban on the open burning of agricultural waste. Implementation of these measures would have a rapid impact on the climate and human health, and also have the added benefit of greatly reducing emissions of carbon monoxide, an important ozone precursor. A second key ozone precursor is methane, which is also a powerful greenhouse gas in its own right. Control measures include reducing leaks from natural gas pipelines and storage tanks, and capturing it from coal, gas and oil extraction, landfills and wastewater treatment plants. Aeration of rice paddies and manure management can also reduce methane releases. Captured methane can often be sold or turned into power. In Monterrey, Mexico, for example, electricity generated from methane collected from the city landfill powers the public transportation system. So such measures can be beneficial even when ignoring the health and climate effects, as they can contribute to energy security and often pay for themselves. According to calculations by me and my colleagues, phasing in all these measures over the next 20 years would reduce global warming by about 0.5 degC in 2050, half of the projected increase between now and then (Science, vol 335, p 183). Regional benefits would be even greater, as black carbon disrupts rainfall patterns and magnifies warming and melting of snow and ice in parts of the world including the Arctic and the Himalayas. On top of the climate benefits, cutting black carbon and ozone would prevent over 3 million premature deaths from air pollution, and increase yields of staple crops by roughly 50 million tonnes a year. Improved cooking stoves would also decrease the demand for firewood in the developing world, reducing deforestation and freeing up time for those who collect wood - primarily women and children - to pursue other activities such as education. Similarly, improved brick kilns now being used in parts of Latin America and Asia require half as much fuel as traditional ones and are less time-intensive for the operators. This means that in addition to their environmental benefits, these measures can contribute to sustainable and human development. Tackling black carbon and methane is clearly a great idea, so why hasn't it been done already? There are many barriers. The upfront costs of some measures can be prohibitive even when they eventually pay for themselves. But this can be overcome by mechanisms such as international financing of capital costs. For other measures, the costs are typically borne by a few while the benefits accrue to everybody. In such cases civil society and governments must get involved. Governments are starting to act. In February, the US, Canada, Sweden, Bangladesh, Ghana and Mexico launched the Climate and Clean Air Coalition to support implementation of measures like these. This coalition will hopefully expand and achieve rapid, widespread adoption of measures to cut black carbon and ozone. While the climate benefits will be substantial, it is important to note that these measures cannot substitute for cuts in carbon dioxide. Black carbon, ozone, carbon monoxide and methane stay in the atmosphere for a fairly short time - a few days for black carbon and about a decade for methane. They thus respond quickly to emissions changes and give us substantial leverage over near-term climate change. In contrast, carbon dioxide is very long-lived and so responds slowly to emissions changes. This means that cuts have little immediate impact, but it also means they must be made now to avoid disastrous changes later on. Controlling short-lived climate pollutants is thus an issue of fairness. Much as failure to reduce carbon dioxide emissions soon would condemn future generations to disastrous change, failure to reduce near-term climate change condemns those alive today to suffer worsening effects of the sort already seen. Some wonder if we really can do both. We can, and we must.

Shindell, Drew↗

Enhancements in Deriving Smoke Emission Coefficients from Fire Radiative Power Measurements

Smoke emissions have long been quantified after-the-fact by simple multiplication of burned area, biomass density, fraction of above-ground biomass, and burn efficiency. A new algorithm has been suggested, as described in Ichoku & Kaufman (2005), for use in calculating smoke emissions directly from fire radiative power (FRP) measurements such that the latency and uncertainty associated with the previously listed variables are avoided. Application of this new, simpler and more direct algorithm is automatic, based only on a fire's FRP measurement and a predetermined coefficient of smoke emission for a given location. Attaining accurate coefficients of smoke emission is therefore critical to the success of this algorithm. In the aforementioned paper, an initial effort was made to derive coefficients of smoke emission for different large regions of interest using calculations of smoke emission rates from MODIS FRP and aerosol optical depth (AOD) measurements. Further work had resulted in a first draft of a 1 1 resolution map of these coefficients. This poster will present the work done to refine this algorithm toward the first production of global smoke emission coefficients. Main updates in the algorithm include: 1) inclusion of wind vectors to help refine several parameters, 2) defining new methods for calculating the fire-emitted AOD fractions, and 3) calculating smoke emission rates on a per-pixel basis and aggregating to grid cells instead of doing so later on in the process. In addition to a presentation of the methodology used to derive this product, maps displaying preliminary results as well as an outline of the future application of such a product into specific research opportunities will be shown.

Ellison, Luke↗

The SMM UV observations of Active Region 5395

The Ultraviolet Spectrometer and Polarimeter (UVSP) on the Solar Maximum Mission (SMM) spacecraft was used extensively to study the spatial morphology and time variability of solar active regions in the far UV (at approx. wavelength of 1370 A) since July 1985. The normal spatial resolution of UVSP observations in this 2nd-order mode is 10 sec., and the highest temporal resolution is 64 milliseconds. To make a full-field, 4 min. by 4 min. image this wavelength using 5 sec. raster steps takes about 3 minutes. UVSP can also make observations of the Sun at approx. wavelength of 2790 with 3 sec. spatial resolution when operated in its 1st-order mode; a full-field image at this wavelength (a so-called SNEW image) takes about 8 minutes. UVSP made thousands of observations (mostly in 2nd-order) of AR 5395 during its transit across the visible solar hemisphere (from 7 to 19 March, inclusive). During this period, UVSP's duty cycle for observing AR 5395 was roughly 40 percent, with the remaining 60 percent of the time being fairly evenly divided between aeronomy studies of the Earth's atmosphere and dead time due to Earth occultation of the Sun. UVSP observed many of the flares tagged to AR 5395, including 26 GOES M-level flares and 3 X-level flares, one of which produced so much UV emission that the safety software of UVSP turned off the detector to avoid damage due to saturation. Images and light curves of some of the more spectacular of the AR 5395 events are presented.

Drake, Stephen A.↗

Climate, Health, Agricultural and Economic Impacts of Tighter Vehicle-Emission Standards

Non-CO2 air pollutants from motor vehicles have traditionally been controlled to protect air quality and health, but also affect climate. We use global composition climate modelling to examine the integrated impacts of adopting stringent European on-road vehicle-emission standards for these pollutants in 2015 in many developing countries. Relative to no extra controls, the tight standards lead to annual benefits in 2030 and beyond of 120,000-280,000 avoided premature air pollution-related deaths, 6.1-19.7 million metric tons of avoided ozone-related yield losses of major food crops, $US0.6-2.4 trillion avoided health damage and $US1.1-4.3 billion avoided agricultural damage, and mitigation of 0.20 (+0.14/-0.17) C of Northern Hemisphere extratropical warming during 2040-2070. Tighter vehicle-emission standards are thus extremely likely to mitigate short-term climate change in most cases, in addition to providing large improvements in human health and food security. These standards will not reduce CO2 emissions, however, which is required to mitigate long-term climate change.

Shindell, Drew↗