Search NASA⌕ Search

SEARCH · Search NASA

Results for “ballooning mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Different roles of elongation and triangularity in the H-mode pedestal height enhancement through strong plasma shaping

While the peeling–ballooning mode is known to be stabilized by strong plasma shaping in a high-confinement mode (H-mode), a significant difference is found in the roles of elongation and triangularity. The elongation mainly stabilizes the high-n ballooning branch, while the triangularity of the low-n peeling one with some destabilization of the high-n ballooning one, where n is the toroidal mode number. This difference is conjectured mainly due to the magnetic shear effect which is substantially enhanced in a high triangularity regime, giving a destabilization on the ballooning branch, while a stabilization on the peeling one. As shown here, an important consequence of these different roles of the two shape parameters is that they should work together to stabilize simultaneously both branches of the PBM, implying the necessity of synergy between them for the large pedestal height enhancement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Linear ion-scale microstability analysis of high and low-collisionality NSTX discharges and NSTX-U projections

Linear gyrokinetic simulations were conducted to investigate ion-gyroradius-scale micro-instability predictions for high-beta NSTX discharges and NSTX-U projections that span over an order of magnitude variation in collisionality. A complex mix of microtearing modes and hybrid trapped electron modes/kinetic ballooning modes (TEM/KBM) is predicted for all experimental or projected conditions. Ion temperature gradient (ITG) instabilities are typically stable in the NSTX discharges investigated, consistent with the observed neoclassical ion thermal transport. ITG thresholds inferred from the simulations are typically much higher than the experimental NSTX gradients, as well as the projected gradients in the NSTX-U scenario, which assumed ion temperatures limited by neoclassical transport only. The analysis suggests ITG instabilities are unlikely to contribute significant anomalous thermal losses in high-beta, lower collisionality NSTX-U scenarios. On the other hand, the NSTX experimental profiles and NSTX-U projections are predicted to be very close to the predicted onset of unstable KBM at most radii investigated. The proximity of the various discharges to the KBM instability threshold implies it may play an important role in setting profile shapes and limiting global energy confinement. Here, it remains to be understood and predicted how KBM contributes to multi-channel transport (thermal and particle transport, for both ions and electrons) in a way that is consistent with experimental inferences.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Analysis of the impact of parallel magnetic fluctuations on linear gyrokinetic stability in NSTX-U and verification of gyro-fluid models

In this work, we use the CGYRO gyrokinetic code to analyze two L- and one H-mode discharges from the National Spherical Torus Experiment (NSTX) and NSTX-Upgrade (NSTX-U) selected due to their different mix of ion-scale driftwaves, ion temperature gradient (ITG) mode and trapped electron mode (TEM), and electromagnetic instabilities, kinetic ballooning mode (KBM), and micro-tearing mode (MTM) in the plasma core. It is found that the effect of parallel magnetic fluctuations is strongly destabilizing to the unstable KBMs compared to calculations with only perpendicular magnetic fluctuations. Two discharges have a mix of ITG/TEM and MTMs that are predicted to be dominant instability across the plasma radius. The parallel magnetic fluctuations are found to have little effect on the MTM stability but are destabilizing to ITG/TEM modes. To test the validity of the gyro-fluid linear stability codes TGLF and GFS at low aspect ratio, a database of linear growth rates has been created using the CGYRO gyrokinetic code. The database is comprised of various parameter scans around a standardized set of NSTX-U core parameters. It contains a group of electrostatic cases and an electromagnetic group that includes the effects of perpendicular and parallel magnetic fluctuations. Comparing the results from the GFS and TGLF models, we find that GFS exhibits the best agreement with the database of CGYRO linear growth rates. Comparing the model results for the electromagnetic scans shows that GFS captures the effects of parallel magnetic fluctuations accurately, while the TGLF model does not, as it lacks sufficient perpendicular energy resolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Role of perturbed parallel magnetic field effects in predicting turbulent transport in NSTX

This study presents analysis of gyrokinetic simulations on the National Spherical Torus Experiment (NSTX) to investigate the effects of electromagnetic fields on plasma turbulence and transport. The simulations, performed with varying levels of fidelity using the gyrokinetic CGYRO code, include electrostatic (ES), single-field electromagnetic (EM1), and two-field electromagnetic (EM2) models. A detailed comparison across the simulation database reveals that electromagnetic effects increase both predicted growth rates and quasilinear fluxes, with EM2 simulations producing stronger turbulence than ES and EM1 cases. Quasilinear modeling using QLGYRO demonstrates that while the perturbed parallel magnetic field (δB ∥ ) does not drastically affect the total flux at experimental gradients, it leads to a shift in the dominant instability, altering mode structures from microtearing to kinetic ballooning modes (KBMs). The proximity of the plasma profiles to the KBM threshold is explored, with the experimental conditions being near the onset of KBM-driven transport. The KBM, with its large growth rates, is identified as a potential driver of electron temperature flattening, as it can rapidly transport heat across flux surfaces. Performing stability analysis shows core-localized unstable a low- mode that could contribute to the flattening at the early times of the discharge. TGYRO predictive modeling, incorporating both TGLF and QLGYRO, indicates that the inclusion of δB ∥ significantly improves the accuracy of temperature profile predictions in NSTX high-beta plasmas, although challenges remain in modeling the sharp flux discontinuities caused by KBM-driven instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Linear gyrokinetic stability of a high β non-inductive spherical tokamak

Spherical tokamaks (STs) have been shown to possess properties desirable for a fusion power plant such as achieving high plasma β and having increased vertical stability. To understand the confinement properties that might be expected in the conceptual design for a high β ST fusion reactor, a 1 GW ST plasma equilibrium was analyzed using local linear gyrokinetics to determine the type of micro-instabilities that arise. Kinetic ballooning modes and micro-tearing modes are found to be the dominant instabilities. The parametric dependence of these linear modes was determined and, from the insights gained, the equilibrium was tuned to find a regime marginally stable to all micro-instabilities at θ 0 = 0.0. This work identifies the most important micro-instabilities expected to generate turbulent transport in high β STs. The impact of such modes must be faithfully captured in first-principles-based reduced models of anomalous transport that are needed for predictive simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Comparison of MHD stability properties between QH-mode and ELMy H-mode plasmas by considering plasma rotation and ion diamagnetic drift effects

Magnetohydrodynamic (MHD) stability at tokamak edge pedestal in a quiescent H-mode (QH-mode) and type-I ELMy H-mode plasmas in DIII-D experiment was analyzed by considering plasma rotation and ion diamagnetic drift effects. QH-mode plasma is marginally stable to kink/peeling mode (K/PM), but ELMy H-mode one is almost unstable to peeling-ballooning mode (PBM). It was identified that there are three physics features responsible for the difference in the MHD stability properties between QH-mode plasma and ELMy H-mode one. These are the distance of pedestal foot from the last closed flux surface (LCFS), the amount of the ion diamagnetic drift frequency at pedestal, and impact of coupled rotation and ion diamagnetic drift effects. These features were confirmed through the numerical experiments that the stability properties of the QH-mode plasma can be changed to that of the ELMy H-mode one by shifting the plasma profiles inward in the radial direction and halving the ion diamagnetic drift frequency. The reasons of the change in the stability properties are thought as that K/PM is stabilized due to the inward shift of the bootstrap current profile, and PBM is destabilized due to the reduction of the coupled rotation and ion diamagnetic drift stabilizing effect. Importance of these features was validated through numerical experiments with experimental data of other QH-mode plasmas in DIII-D. All the results show that MHD stability properties of QH-mode plasma can be obtained in case that pedestal foot is close to LCFS, ion diamagnetic drift frequency is large due to high ion temperature, and strong rotation shear exists near pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Ballooning instability preventing the H-mode access in plasmas with negative triangularity shape on the DIII-D tokamak

Infinite toroidal mode number (n=∞ ) ballooning mode analysis of negative triangularity discharges on DIII-D shows that the access to 2nd stability becomes strongly restricted when the top triangularity decreases even modestly from -0.18 to -0.36. This is observed in experiment to coincide with the suppression of the L-H-transition. Further theoretical analysis with ballooning mode limited pedestals shows that the threshold for opening the 2nd stability access rises from a pedestal temperature of 0.3 keV to 1 keV when the top triangularity is decreased from -0.18 to -0.36 indicating that to access the 2nd stability with the more negative triangular shape would require unrealistically high pedestal temperature. Furthermore, the pedestal predicted by the EPED code agrees with the experimental H-mode profile for the negative triangularity case but in contrast to positive triangular shapes the prediction shows no increase in pedestal height with increasing core pressure when triangularity is negative. This work provides a first model to predict when negative triangularity plasmas can be expected to access the H-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Characterization of the ELM-free negative triangularity edge on DIII-D

Tokamak plasmas with strong negative triangularity (NT) shaping typically exhibit fundamentally different edge behavior than conventional L-mode or H-mode plasmas. On DIII-D, every plasma with sufficiently negative triangularity (δ < δ crit ≃ -0.12) is found to be inherently free of edge localized modes (ELMs), even at injected powers well above the predicted L-H power threshold. It is also possible to access an ELM free state at weaker average triangularities provided that at least one of the two x-points is still sufficiently negative. Access to the ELM-free NT scenario is found to coincide with the closure of the second stability region for infinite-n ballooning modes, suggesting that ballooning stability may play a role in limiting the accessible pressure gradient in NT plasmas. Despite this, NT plasmas are able to support small pedestals and are typically characterized by an enhancement of edge pressure gradients beyond those found in traditional L mode plasmas. Further, the pressure gradient inside of this small pedestal is unusually steep, allowing access to high core performance that is competitive with other ELM-free regimes previously achieved on DIII-D. Since ELM-free operation in NT is linked directly to the magnetic geometry, NT fusion pilot plants are predicted to maintain advantageous edge conditions even in burning plasma regimes, potentially eliminating reactor core-integration issues caused by ELMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Characteristics of grassy ELMs and their impact on the divertor heat flux width

We report BOUT++ turbulence simulations are conducted for a 60 s steady-state long pulse high β p EAST grassy ELM discharge. BOUT++ linear simulations show that the unstable mode spectrum covers a range of toroidal mode numbers from low-n (n = 10–15) peeling–ballooning modes (P–B) to high-n (n = 40–80) drift-Alfvén instabilities. Nonlinear simulations show that the ELM crash is triggered by low-n peeling modes and fluctuation is generated at the peak pressure gradient position and radially spread outward into the scrape-off-layer, even though the drift-Alfvén instabilities dominate the linear growth phase. However, drift-Alfvén turbulence delays the onset of the grassy ELM and enhances the energy loss with the fluctuation extending to pedestal top region. Simulations further show that if the peeling drive is removed, the fluctuation amplitude drops by an order of magnitude and the ELM crashes disappear. The divertor heat flux width is ~2 times larger than the estimates based on the HD model and the Eich's ITPA multi-tokamak scaling (or empirical Eich scaling) due to the strong radial turbulence transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Linear simulation of kinetic electromagnetic instabilities in a tokamak plasma with weak magnetic shear

Gyrokinetic simulation and eigenvalue calculation of electromagnetic instabilities are carried out for an experimentally observed low-n mode in weak magnetic shear discharge. With different magnetic shear values, the Gyrokinetic Toroidal Code simulation of the ion temperature gradient mode is consistent with the eigenvalue code (HD7) calculation. Due to the sensitivity of the kinetic ballooning mode (KBM) to global equilibrium, the simulation of the KBM deviates from the eigenvalue results, for the ballooning representation used in HD7 satisfies its spatial scale separations. Under a flat safety factor profile, the KBM is more unstable and its mode structure tends to move with the peak of the ion temperature drive. Further simulation of the KBM in an HL-2A-like equilibrium shows that the β excitation threshold of the mode is lower than 0.2% and the dominant toroidal mode number is n = 4, which is consistent with the measured experimental spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Self-consistent core-pedestal ITER scenario modeling

The purpose of these integrated ITER simulations is to identify dependencies that can impact the performance of ITER. The dependence of fusion power production, temperature and density pedestals, and core profiles on varying magnetic-q, edge density fueling strength, neoclassical transport, magnetic field strength, and alpha heating, are examined. It is noted that ion modes usually dominate the interior, while electron modes dominate the barrier. The electron mode without flow shear is substantially stronger. The q increase tends to cause more kinetic ballooning modes at the edge and the q decrease means that the peeling is getting worse, but the ballooning is getting better. The large edge q tends to provide hollow density while small edge q gives normal density profile. This is consistent with the observation that the density of particles is inversely proportional to the density of the plasma current. The rise in the source of the edge particle increases the density of the edge and the reaction rate close to the edge increases temperature fluxes, resulting in weak pedestal barriers. When neoclassical transport is turned off or the strength of B-field is increased, the pronounced edge barriers are identified. In addition, a distinct effect on the magnetohydrodynamic (MHD) modes is observed due to the increased B-field. The interesting aspect is that the barrier collapses about q = 2 as the stability of MHD has decreased to replace the barrier with a continuous slope but with roughly the same fusion power. This would actually be good for a reactor. The slope of the H-mode pedestal is found to be reduced due to the alpha heating. It is expected that the problem of edge-localized modes causing damage to the first wall will be eased. The effects of circular, elongated, and general geometry on plasma profiles are also compared and contrasted. The circular geometry has a hollow density profile and no edge or internal thermal transport barrier (ETB or ITB). However, both ETBs and ITBs can be found in the elongated geometry. In general geometry, there is a weaker ETB, comparable ITBs, but a higher edge particle transport barrier than in elongated geometry. Higher density near the edge, on the other hand, causes more wall erosion, so elongated geometry might be the best option.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Overview of the ASDEX Upgrade results

After a 26-month vent ASDEX Upgrade (AUG) went back in operation with a newly designed upper W-divertor suitable for alternative divertor configurations (featuring in-vessel coils and cryo-pump). Parameter scans and an extensive set of measurements were obtained and their interpretation is ongoing. Prompted by the ITER wall change, dedicated experiments on non-boronized plasma startup were contrasted to that employing asymmetric and more symmetric boronizations. The asymmetric boronization proved to be as beneficial as the more symmetric one, which is in contrast to previous model calculations assuming perfect sticking of boron (measurements suggest sticking ≈ 0.3). In the startup phase also the impurity influxes at the outboard limiters were investigated contrasting the unboronized case featuring cold edges (low- Z radiation) to the boronized case, in which the lifetime of the boron layers could be estimated. Pedestal stability investigations revealed that the quasi-continuous exhaust (QCE) regime is obtained when ballooning modes are active in the vicinity of the separatrix and the global peeling-ballooning stability is high enough. Thus, at high enough shaping and high gas flux both can be achieved and QCE is a consequence. The closely related enhanced D-alpha (EDA) mode is not clearly distinguishable from QCE, e.g. the quasi-coherent mode characteristic for EDA also shows up in QCE. In QCE the impurity transport is behaving benign as could be measured for Ne with a novel analysis method making use of a comprehensive set of CXRS measurements. For high radiative fractions the regime of the X-point radiator (XPR) is accessible at AUG and the understanding of its access conditions and behaviour is further developed. Due to the localized radiative cooling at the X-point the XPR can be well diagnosed and thus controlled. For negative triangularity shapes, further experiments at increased shaping resulted in strongly heated L-mode plasmas avoiding ELMs. Two integrated modelling approaches towards ITER suggested that core W-accumulation will be no issue for ITER and that the fusion yield in ITER may be Q = 12 (i.e. ITPA20-IL scaling is too pessimistic). Further, investigations of the ITER ramp-down in AUG provide insights into maintaining position control. Various aspects of shattered pellet injection were investigated in AUG and one of the results show that with increasing Ne fraction the radiation during the current quench increases and the current decay becomes faster.

ASDEX Upgrade↗
DOE OSTI2025

X-point effects on the ideal MHD modes in tokamaks in the description of dual-poloidal-region safety factor

The flux coordinates with dual-region safety factor (q) in the poloidal direction are developed in this work. The X-point effects on the ideal MHD modes in tokamaks are then analyzed using this coordinate system. Since the X-point effects mainly affect the edge region, the modes localized at the tokamak edge are particularly examined. Two types of modes are studied. The first is related to the conventional peeling or peeling-ballooning modes. The mode existence aligned with the local magnetic field in the poloidally core region as observed experimentally is confirmed. The X points are shown to contribute to a stabilizing effect for the conventionally treated modes with the surface-averaged q and with the tokamak edge portion truncated. The other is the axisymmetric modes localized in the vicinity of X points, which can affect the cross-field-line transport near the X points. The existence of axisymmetric modes points to the possibility of applying a toroidally axisymmetric resonant magnetic perturbation (RMP) in the X-point area for mitigating the edge localized modes, which can be an alternative to the current RMP design. The dual q description also has important implications for the existing non-axisymmetric RMP concept. It helps to understand why the RMP suppression of edge localized modes is difficult to achieve in the double-null tokamak configurations and points to the possibility of further improving the current RMP concept by considering the alignment to the local q.

Fourier analysis↗
DOE OSTI2024

Verification of electromagnetic simulation capabilities in global gyrokinetic particle-in-cell code GTS

Recently, the numerical scheme presented by Mishchenko et al. enabled explicit gyrokinetic simulations of low-frequency electromagnetic instabilities in tokamaks at experimentally relevant values of plasma β⁠. This scheme resolved the long-standing cancellation problem that previously hindered gyrokinetic particle-in-cell code simulations of magnetohydrodynamic phenomena with inherently small parallel electric fields. Moreover, the scheme did not employ approximations that eliminate critical tearing-type instabilities. Here, we report on the implementation of this numerical scheme in the global gyrokinetic particle-in-cell code GTS. This implementation allows for a more complete and accurate picture of interaction between small scale turbulence and MHD modes in tokamaks. Additionally, we present a comprehensive set of verification simulations of numerous electromagnetic instabilities relevant to present-day tokamaks. These simulations encompass the kinetic ballooning mode, the internal kink mode, the tearing mode, the micro-tearing mode, and the toroidal Alfven eigenmode destabilized by energetic ions, which are all instrumental in understanding tokamak physics. We will also showcase the preliminary nonlinear simulations of kinetic ballooning instabilities and (2,1) island formation due to tearing mode instability. These simulations validate the accuracy of the scheme implementation and pave the way for studying how these instabilities affect plasma confinement and performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Grassy ELM regime at low pedestal collisionality in high-power tokamak plasma

Spontaneous mitigation of giant ELMs and appearance of grassy ELMs have been observed repeatedly at low pedestal collisionality (${\nu }_{\mathrm{e},\mathrm{p}\mathrm{e}\mathrm{d}}^{{\ast}}\sim 0.15$) in the high-power (P inj > 13 MW) hybrid scenario in DIII-D. Higher β p and higher q 95 appear to be beneficial to achieving the grassy ELM regime. The grassy ELM H-mode plasma shows high energy confinement performance (H 98y2 up to over 1.5) under the conditions of high neutral beam torque and high core rotation. The pedestal width appears to exceed the EPED1.0 model prediction by more than 50%. Pedestal stability analysis performed with the ELITE code indicates that the stability against low-n kink/peeling modes is improved with increased auxiliary heating power and the operational point in the grassy ELM regime is located near the ballooning boundary. The pedestal stability characteristics during the grassy ELM crashes have been investigated in comparison with the giant ELM crashes based on plasma profiles experimentally measured with high resolution and accuracy. It has been found that the underlying mechanism for the observed small-amplitude ELM crashes is mainly the expansion of the ballooning stability boundary induced by an initial radially localized collapse in the pedestal, which helps to stop the growth of instabilities and further collapse of the pedestal. The effect of electron density pedestal on mitigating edge localized instabilities has been analyzed by numerical simulation, suggesting that the electron density pedestal characterized by high n e,sep /n e,ped and low density gradient helps to stabilize peeling-ballooning modes because of a low pressure pedestal gradient and to lower the ballooning boundary mainly because of a low ion diamagnetic frequency in the pedestal region, thus triggering ballooning instabilities and producing the intrinsic grassy ELMs. Numerical simulation of the Chinese fusion engineering test reactor (CFETR) with the SOLPS code indicates that the separatrix density might be insensitive to the electron diffusivity in the pedestal region and increase with the power flowing from the core region to the edge region. Furthermore, pedestal stability analysis suggests that the flat density pedestal with high separatrix density obtained in the high-power plasma in CFETR would make the operational point close to the ballooning boundary, which is considered to help destabilize ballooning instabilities and facilitate the access to the grassy ELM regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The role of ion-scale micro-turbulence in pedestal width of the DIII-D wide-pedestal QH mode

The low-edge rotation, intrinsically ELM-free, and improved confinement wide-pedestal quiescent H-mode (QH-mode), discovered in DIII-D tokamak, has pedestal widths exceeding the EPED-kinetic-ballooning mode (KBM) model scaling typically by at least 25%. Ion-scale ($k_yp_s$ < 1) microturbulence and its role in setting the pedestal structure is investigated using the radially local δ$f$ gyrokinetic code CGYRO. The electromagnetic trapped electron mode (TEM) is unstable at the pedestal top, while plasma beta (β$_e$) is ∼60% below the KBM onset threshold and the electron temperature gradient mode is found to be unstable in the peak gradient region. Nonlinear simulation reveals that the ion-scale turbulence could produce electron energy flux consistent with the flux inferred from power balance at the pedestal top, with a reasonable variation of the local shearing rate; and the local neoclassical transport from NEO is dominant over the simulated turbulent transport in the ion energy flux channel. The simulated ion-scale turbulence produces much lower electron energy flux than inferred from experiment in the pedestal peak gradient region. A correction to the EPED-KBM pedestal width scaling is obtained based on the two-dimensional scan of pedestal top plasma beta (β$_e$) and normalized electron density and temperature scale lengths,${a}$/${L_n}_e$, ${a}$/${L_T}_n$using CGYRO linear simulations. Mode transitions among TEM, micro-tearing mode, ion-temperature gradient mode and KBM, are observed in the 2D scan at the pedestal top. A fixed normalized growth rate for these drift-type modes is taken to determine the pedestal width scaling, which shows good consistency with the QH experimental database on pedestal heights and widths. The onset of KBM instabilities and the local E × B shear suppression criterion set the lower and upper limit for the pedestal width of standard QH-mode, wide-pedestal QH-mode and type-I ELMy H mode. A potentially higher and wider pedestal is expected from the new scaling of pedestal width. This work presents an improved understanding of the ion-scale micro-turbulence of wide-pedestal QH-mode and sheds light on a promising scenario for future reactors, including ITER and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Elements of H-mode pedestal structure

Abstract This paper reviews current understanding of key physics elements that control the H-mode pedestal structure, which exists at the boundary of magnetically confined plasmas. The structure of interest is the width, height and gradient of temperature, density and pressure profiles in the pedestal. Emphasis is placed on understanding obtained from combined experimental, theoretical and simulation work and on results observed on multiple machines. Pedestal profiles are determined by the self-consistent interaction of sources, transport and magnetohydrodynamic limits. The heat source is primarily from heat deposited in the core and flowing to the pedestal. This source is computed from modeling of experimental data and is generally well understood. Neutrals at the periphery of the plasma provide the dominant particle source in current machines. This source has a complex spatial structure, is very difficult to measure and is poorly understood. For typical H-mode operation, the achievable pedestal pressure is limited by repetitive, transient magnetohydrodynamic instabilities. First principles models of peeling–ballooning modes are generally able to explain the observed limits. In some regimes, instability occurs below the predicted limits and these remain unexplained. Several mechanisms have been identified as plausible sources of heat transport. These include neoclassical processes for ion heat transport and several turbulent processes, driven by the steep pedestal gradients, as sources of electron and ion heat transport. Reduced models have successfully predicted the pedestal or density at the pedestal top. Firming up understanding of heat and particle transport remains a primary challenge for developing more complete predictive pedestal models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Spherical tokamak physics research in preparation for the operation of NSTX-U

The National Spherical Torus Experiment Upgrade (NSTX-U) is preparing to resume operation, representing a crucial step toward realizing compact, cost-effective fusion pilot plants. In advance of this, extensive modeling and data analysis have been conducted to advance the physics basis for low-aspect-ratio, high-performance plasma regimes, focusing on three core objectives: confinement and stability, power and particle handling, and steady-state operation. Significant progress has been made in understanding the electron temperature flattening in high-β plasmas, which is shown to be driven by a complex interplay of magnetohydrodynamic instabilities (e.g. non-resonant infernal modes), fast-ion-driven Alfvén eigenmodes, and electron and ion-scale micro-instabilities, particularly Kinetic Ballooning Modes (KBMs), whose destabilization is strongly dependent on parallel magnetic field fluctuations (δB ∥ ). Furthermore, a new gyrokinetic critical pedestal model was developed, accurately predicting pedestal structure by identifying KBMs as the primary stability limit, offering a critical constraint for future high-confinement scenarios. To address the challenge of high heat flux, novel liquid lithium plasma-facing components were modeled. The analysis confirmed that lithium vapor shielding is a self-regulating mechanism for heat mitigation, while also emphasizing that strong main ion parallel flow is essential to minimize core lithium contamination. Finally, progress toward steady-state operation was anchored by developing the required physics basis and control tools. This includes predictive modeling for reversed magnetic shear sustainment, demonstrating that magnetic island-induced bootstrap current reduction is negligible in STs, and advancing real-time control and disruption avoidance capabilities. The development of high-speed surrogate models (e.g. MMMNet) provides computationally efficient tools vital for non-inductive scenario optimization and integrated, low-disruptivity operations planned for NSTX-U.

NSTX-U↗