Search NASA⌕ Search

SEARCH · Search NASA

Results for “bamboo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

44 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Utilization of guaiacol-based deep eutectic solvent for achieving a sustainable biorefinery

This study proposed a renewable deep eutectic solvent (DES) pretreatment using lignin-derived guaiacol as the hydrogen bond donor. The DES showed excellent biomass fractionation efficiency after the incorporation of trace AlCl 3 as the reinforcer, which removed 79.1 % lignin while preserving more than 90 % glucan. The pretreated bamboo exhibited 96.2 % glucan enzymatic hydrolysis yield at only 110 °C. The physicochemical properties of the pretreated solids were comprehensively investigated to explain how the DES fractionation overcame the biomass recalcitrance. The regenerated lignin from the DES pretreatment was also analyzed, which revealed that lignin β-O-4 bond was significantly cleaved. In conclusion, this guaiacol-based DES could greatly contribute to establish a closed-loop biorefinery sequence with high lignin fractionation efficiency and great solvent recyclability.

09 BIOMASS FUELS↗
DOE OSTI2022

Effective biomass fractionation and lignin stabilization using a diol DES system

A sustainable and renewable biorefinery will increase the economic viability of lignocellulose-derived products. In this study, a diol-based deep eutectic solvent (DES) was developed to reduce the recalcitrance of bamboo, facilitate saccharification and valorize the lignin fraction. The DES pretreatment dramatically enhanced glucan digestibility by the effective removal of lignin (as high as 85.45%) and xylan (91.12%). Notably, the recovered lignin from DES pretreatment was protected during the fractionation, showing well-preserved β-O-4 structures (31.82%–59.06%). The mechanism of lignin protection was analyzed to be accomplished by incorporating the diol hydroxyl functional groups into the α position of the lignin β-O-4 structure via etherification. This work highlighted that diol DES is a promising pretreatment solvent to valorize both cellulose and lignin fractions with high enzymatic hydrolysis yield and high-quality lignin co-product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancing carbon nanotube production from carbon dioxide and ethane using bimetallic catalysts

Converting CO 2 into carbon nanotubes (CNTs) offers a promising way for CO 2 utilization and sequestration, potentially mitigating environmental impacts from anthropogenic emissions. This study reports that bimetallic CoFe catalysts can increase CNT production from the reaction of CO 2 and C 2 H 6 by an order of magnitude compared to their monometallic counterparts. The active sites and CNT morphologies are composition-dependent: Co-rich catalysts (Co/Fe ratio ≥ 5) form stable face-centered cubic (fcc) CoFe alloys, producing cylindrical CNTs; Fe-containing catalysts (Co/Fe ≤ 2) favor body-centered cubic (bcc) CoFe alloy upon reduction, which transforms into carbides, resulting in bamboo-like CNTs. Experimental evidence and DFT calculations reveal that adjacent Fe and Co atoms modulate CO and C x H y adsorption, regulating CNT production pathways through the CO Boudouard reaction and C 2 H 6 decomposition. In conclusion, these results highlight the dual benefits of bimetallic catalysts in enhancing CNT yield and controlling CNT morphology through adjustment of catalyst compositions.

58 GEOSCIENCES↗
DOE OSTI2024

Natural fibers as promising core materials of vacuum insulation panels

To reduce energy consumption in buildings, this paper investigates the feasibility of using natural fibers as cost-effective, environmentally sustainable core materials for vacuum insulation panels (VIPs). First, a comprehensive experimental study was conducted for 10 potential natural fiber candidates. The thermal conductivities of the 10 natural fiber mats at various vacuum pressures were measured; their compression and morphology properties were quantified. In addition, an analytical model was used to explore the major factors that influence the thermal conductivity of natural fibers as a function of internal air pressure. Results show that recycled cotton, kapok, and bamboo fibers are ideal candidates for VIP core materials; at <0.05 Pa, their thermal conductivities varied between 2 and 4 mW/(m∙K). Furthermore, for some fibers, thermal conductivity was inversely proportional to fiber density. For the selection of fiber materials for VIP cores, the ideal fiber candidate has a small fiber diameter and a low fiber mat density. Based on thermal measurements, even though the internal air pressure of 5 Pa was enough to attain the minimum thermal conductivity, obtaining internal air pressure below 5 Pa is recommended for prolonged service life, considering small leaks of VIP package barrier films and potential off-gassing from fibers. The simulation results predicting the effective thermal conductivities matched the experimental results well. These findings indicate that natural fiber–based VIPs have the potential to be a sustainable, inexpensive alternative to the current technologies in building insulation materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The effect of lignin degradation products on the generation of pseudo-lignin during dilute acid pretreatment

Pseudo-lignin is an insoluble material that tends to deposit on acidic pretreated fiber surface and negatively impacts the biological conversion of biomass to valued added products. Employing a laboratory generated acidic hydrolysate solution from dilute acid pretreatment of bamboo residues, we sought to seek an improved understanding of pseudo-lignin formation from fragmented carbohydrates. In addition, we also performed experiments to investigate how lignin model compounds interact with carbohydrates en route to pseudo-lignin’s formation. The yields of pseudo-lignin generated from xylose (CXPL) were higher than those generated from glucose (CGPL). Gas chromatography-Mass spectrometry and Foloin-Ciocalteau analysis suggested that there were more aromatic compounds in hydrolyzate during CGPL’s formation. The presence of lignin phenolic model compounds had both a positive and negative effect upon quantitative yields of pseudo-lignin. Gel permeation chromatography and NMR analysis ( 31 P and 2D-HSQC NMR) of the pseudo-lignin samples generated in the presence and absence of 4-hydroxybenzoic acid (4-HA), employed as a lignin model compound, revealed drastic differences in molecular weight, changes in hydroxyl group content, and hydrocarbon bonds, suggesting significant differences in the pseudo-lignin reaction pathways when certain lignin model compounds are present. Finally, our findings demonstrate the effects of both hemicellulose carbohydrate makeup and lignin model compound impact on the formation of pseudo-lignin and its chemical properties, suggesting a potential way to minimize pseudo-lignin formation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Mild organosolv pretreatment of sugarcane bagasse with acetone/phenoxyethanol/water for enhanced sugar production

This study conducted mild organosolv pretreatment of sugarcane bagasse with acetone/phenoxyethanol/water (APW) solutions to improve sugar production in the subsequent enzymatic hydrolysis step. Here, the Box–Behnken design was used to optimize pretreatment conditions based on lignin removal. Further examination of the data revealed that lignin removal was positively correlated (R 2 > 0.95) with the combined severity factor (CSF). Pretreatment under the optimal conditions (125 °C–120 min, 0.17 M H 2 SO 4 , liquid–solid ratio of 15) led to 98.1% lignin removal and 74.5% cellulose digestibility compared to a low digestibility of 9.3% with raw sugarcane bagasse (SCB). Moreover, the APW process showed effective fractionation of pine, corn stalk and bamboo, and lignin removal was over 90%. The recovered lignin was characterized by 2D-HSQC NMR and 31P NMR, suggesting that the pretreatment resulted in breakage of β-O-4, total phenolic OH and H-units increased. However, the enzymatic hydrolysis efficiency (EHE) of samples with a lower lignin content (<4%) varied significantly. Correlations between various substrate-related factors of the pretreated SCB and EHE were analyzed to understand this observation. The results showed that the surface area of cellulose, lateral order index, CrI, and specific surface area were the predominant factors for enzymatic hydrolysis rather than lignin properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rapid solidified ductile Cu-Al-Mn ribbon and its elastocaloric potential

Abstract Cu-Al-Mn alloys display martensitic transformation over a wide range of temperatures. In addition to low cost, this alloy is known for its low transformation stress with reasonable latent heat favoring elastocaloric applications. However, the ductility of Cu-Al-Mn can be limited owing to ordering and intergranular fracture. Through rapid solidification by melt spinning, we show that Cu-Al-Mn ribbon can be made highly ductile (greater than 8% tensile strain in the as-spun state and 10% tensile strain after heat treatment). The ductility of the melt-spun ribbon is related to the suppression of L2 1 ordering that is characterized through magnetic property measurement. Heat treatment of the ribbon promotes bamboo grain formation, and the latent heat is increased to 6.4 J g −1 . Under tensile conditions, we show that the ribbon exhibited about 4 °C temperature change (4.4 °C on heating and 4.2 °C on cooling from 6.3% strain).

36 MATERIALS SCIENCE↗
DOE OSTI2025

New Deformation Mechanisms in Nanocrystalline Nano-porous Small Scale Metals as Defined by Kinetically-driven Microstructures

This report describes recent advances in the design and fabrication of nanostructured metallic pillars with hierarchical microstructures using a novel nanoscale additive manufacturing approach. Through a hydrogel-infusion-based two-photon lithography (TPL) method, we successfully fabricated 3D nickel nanopillars exhibiting both nanocrystalline and nanoporous features. The resulting “bamboo-like” internal architecture comprises 30–50 nm grains and voids with similarly scaled pores. These geometrically tunable pillars, with diameters ranging from ~130 to 550 nm, serve as an ideal platform for probing deformation mechanisms in structurally heterogeneous metals at the nanoscale.

36 MATERIALS SCIENCE↗