Search NASA⌕ Search

SEARCH · Search NASA

Results for “baseline selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Space-based solar power conversion and delivery systems study. Volume 2: Engineering analysis

The technical and economic feasibility of Satellite Solar Power Systems was studied with emphasis on the analysis and definition of an integrated strawman configuration concept, from which credible cost data could be estimated. Specifically, system concepts for each of the major subprogram areas were formulated, analyzed, and iterated to the degree necessary for establishing an overall, workable baseline system design. Cost data were estimated for the baseline and used to conduct economic analyses. The baseline concept selected was a 5-GW crystal silicon truss-type photovoltaic configuration, which represented the most mature concept available. The overall results and major findings, and the results of technical analyses performed during the final phase of the study efforts are reported.

Source record↗
NASA NTRS1979

A piloted simulator study on augmentation systems to improve helicopter flying qualities in terrain flight

Four basic single-rotor helicopters, one teetering, on articulated, and two hingeless, which were found to have a variety of major deficiencies in a previous fixed-based simulator study, were selected as baseline configurations. The stability and control augmentation systems (SCAS) include simple control augmentation systems to decouple pitch and yaw responses due to collective input and to quicken the pitch and roll control responses; SCAS of rate-command type designed to optimize the sensitivity and damping and to decouple the pitch-roll due to aircraft angular tate; and attitude-command type SCAS. Pilot ratings and commentary are presented as well as performance data related to the task. SCAS control usages and their gain levels associated with specific rotor types are also discussed.

Chen, R. T. N.↗
NASA NTRS1978

A piloted simulator investigation of augmentation systems to improve helicopter nap-of-the-earth handling qualities

A piloted simulation study assessed various levels of stability and control augmentation designed to improve the handling qualities of several helicopters in nap-of-the-earth (NOE) flight. Five basic single rotor helicopters - one teetering, two articulated, and two hingeless - which were found to have a variety of major deficiencies in a previous fixed-based simulator study were selected as baseline configurations. The stability and control augmentation systems (SCAS) include simple control augmentation systems (CAS) to decouple pitch and yaw responses due to collective input and to quicken the pitch and roll control responses; SCAS of rate command type designed to optimize the sensitivity and damping and to decouple the pitch-roll due to aircraft angular rate; and attitude command type SCAS. Pilot ratings and commentary are presented as well as performance data related to the task. SCAS control usage and their gain levels associated with specific rotor type are also discussed.

Chen, R. T. N.↗
NASA NTRS1980

Orbit transfer vehicle engine study, phase A extension. Volume 2A: Study results

Engine trade studies and systems analyses leading to a baseline engine selection for advanced expander cycle engine are discussed with emphasis on: (1) performance optimization of advanced expander cycle engines in the 10 to 20K pound thrust range; (2) selection of a recommended advanced expander engine configuration based on maximized performance and minimized mission risk, and definition of the components for this configuration; (3) characterization of the low thrust adaptation requirements and performance for the staged combustion engine; (4) generation of a suggested safety and reliability approach for OTV engines independent of engine cycle; (5) definition of program risk relationships between expander and staged combustion cycle engines; and (6) development of schedules and costs for the DDT&E, production, and operation phases of the 10K pound thrust expander engine program.

Source record↗
NASA NTRS1980

Noise control prediction for high-speed, propeller-driven aircraft

An analytical study is described which explores add-on treatments and advanced concepts for the reduction of noise levels in three high-speed aircraft driven by propellers. Noise reductions of 25 to 28 dB are required to achieve a goal of an A-weighted sound level not greater than 80 dB. It is found that only a double-wall system, with a limp inner wall or trim panel, can achieve the required noise reductions. Weight penalties are estimated for the double-wall treatments. These penalties are 0.75% to 1.51% of the aircraft takeoff weight for the particular baseline designs selected.

Wilby, J. F.↗
NASA NTRS1982

Deployment/retraction ground testing of a large flexible solar array

The simulated zero-gravity ground testing of the flexible fold-up solar array consisting of eighty-four full-size panels (.368 m x .4 m each) is addressed. Automatic, hands-off extension, retraction, and lockup operations are included. Three methods of ground testing were investigated: (1) vertical testing; (2) horizontal testing, using an overhead water trough to support the panels; and (3) horizontal testing, using an overhead track in conjunction with a counterweight system to support the panels. Method 3 was selected as baseline. The wing/assembly vertical support structure, the five-tier overhead track, and the mast-element support track comprise the test structure. The flexible solar array wing assembly was successfully extended and retracted numerous times under simulated zero-gravity conditions.

Chung, D. T.↗
NASA NTRS1984

Ground-simulation investigation of VTOL instrument flight rules airworthiness criteria

A two-part ground-simulation investigation of VTOL terminal-area operations, conducted as part of a joint NASA/FAA program to develop airworthiness criteria for this class of vehicle, is described. The baseline vehicle selected for the simulations was a generalized version of the XV-15 tilt-rotor mathematical model, which was modified to permit generic variations in forces or moments or both with power or configuration changes. Additionally, changes to wing area and rotor-blade chord were considered as a means of modifying the allowable thrust-angle versus speed relationships (the conversion corridor). The Vertical Motion Simulator at Ames Research Center was used in the experiment. Four engineering test pilots conducted over 200 piloted evaluations examining the influence of the experimental variables on their ability to perform terminal-area operations.

Lebacqz, J. V.↗
NASA NTRS1985

The effect of engine design characteristics on orbital transfer vehicle performance

The objective in maximizing performance for a space-based Orbital Transfer Vehicle (OTV) is to minimize the propellant required to successfully complete a given reference mission and thereby reduce launch and storage costs. Engine sizing studies were conducted which examined the effect of engine design characteristics on the total propellant required to accomplish the manned and unmanned OTV missions anticipated for the 1995 to 2010 time period. Two propellant combinations, O2/H2 and N2O4/MMH, were selected as baselines. Exotic combinations such as F2/H2 and O2/CH4 were also studied to identify potential benefits and growth capabilities. Parametric results showing the effects of engine thrust, number of engines, nozzle area ratio and payload requirements are presented for various reference missions. The results indicate that the optimum engine size and thrust are not significantly affected by detailed engine design characteristics.

Schmidt, G. R.↗
NASA NTRS1987

Trajectory options for the Comet Rendezvous Asteroid Flyby mission

The Comet Rendezvous Asteroid Flyby mission is strongly supported by the scientific community. Two major events during the past year have forced a re-analysis of the mission options, with the goal of selecting a baseline mission for launch in 1993. Venus and earth gravity assists can be used to allow rendezvous with comet Tempel 2 in 1996; the scientific potential of the resulting mission is excellent. Although backup mission opportunities have been identified, the significantly longer flight times weaken the scientific appeal of these missions.

Miller, S. L.↗
NASA NTRS1987

Wind-tunnel test results of airfoil modifications for the EA-6B

Wind-tunnel tests have been conducted (to determine the effects on airfoil performance for several airfoil modifications) for the EA-6B Wing Improvement Program. The modifications consist of contour changes to the leading-edge slat and trailing-edge flap to provide a higher low-speed maximum lift with no high-speed cruise-drag penalty. Airfoil sections from the 28- and 76-percent span stations were selected as baseline shapes with the major testing devoted to the inboard airfoil section (28-percent span station). The airfoil modifications increased the low-speed maximum lift coefficient between 20 and 35 percent over test conditions of 3 to 14 million chord Reynolds number and 0.14 to 0.34 Mach number. At the high-speed test conditions of 0.4 to 0.80 Mach number and 10 million chord Reynolds number, the modified airfoils had either matched or had lower drag coefficients for all normal-force coefficients above 0.2 as compared to the baseline airfoil. At normal-force coefficients less than 0.2, the baseline (original) airfoil had lower drag coefficients than any of the modified airfoils.

Sewall, W. G.↗
NASA NTRS1992

Optical property degradation of anodic coatings in the Space Station low earth orbit

The anodic coatings and optical properties to be used for passive thermal control of the SSF are studied. Particular attention is given to the beginning-of-life optical properties for aluminum alloys suitable for structural and radiator applications, the statistical variation in the beginning-of-life properties, and estimates of the end-of-life properties of the alloys based on ultraviolet radiation testing and flight test results. It is concluded that anodic coatings can be used for thermal control of long life, low earth orbit spacecraft. Some use restrictions are defined for specific cases. Anodic coatings have been selected as baseline thermal control coating for large portions of the SSF.

David, Kaia E.↗
NASA NTRS1991

Advanced technology commercial fuselage structure

Boeing's program for Advanced Technology Composite Aircraft Structure (ATCAS) has focused on the manufacturing and performance issues associated with a wide body commercial transport fuselage. The primary goal of ATCAS is to demonstrate cost and weight savings over a 1995 aluminum benchmark. A 31 foot section of fuselage directly behind the wing to body intersection was selected for study purposes. This paper summarizes ATCAS contract plans and review progress to date. The six year ATCAS program will study technical issues for crown, side, and keel areas of the fuselage. All structural details in these areas will be included in design studies that incorporate a design build team (DBT) approach. Manufacturing technologies will be developed for concepts deemed by the DBT to have the greatest potential for cost and weight savings. Assembly issues for large, stiff, quadrant panels will receive special attention. Supporting technologies and mechanical tests will concentrate on the major issues identified for fuselage. These include damage tolerance, pressure containment, splices, load redistribution, post-buckled structure, and durability/life. Progress to date includes DBT selection of baseline fuselage concepts; cost and weight comparisons for crown panel designs; initial panel fabrication for manufacturing and structural mechanics research; and toughened material studies related to keel panels. Initial ATCAS studies have shown that NASA's Advanced Composite Technology program goals for cost and weight savings are attainable for composite fuselage.

Ilcewicz, L. B.↗
NASA NTRS1992

Evaluation of capillary electrophoresis for in-flight ionic contaminant monitoring of SSF potable water

Until 1989, ion chromatography (IC) was the baseline technology selected for the Specific Ion Analyzer, an in-flight inorganic water quality monitor being designed for Space Station Freedom. Recent developments in capillary electrophoresis (CE) may offer significant savings of consumables, power consumption, and weight/volume allocation, relative to IC technology. A thorough evaluation of CE's analytical capability, however, is necessary before one of the two techniques is chosen. Unfortunately, analytical methods currently available for inorganic CE are unproven for NASA's target list of anions and cations. Thus, CE electrolyte chemistry and methods to measure the target contaminants must be first identified and optimized. This paper reports the status of a study to evaluate CE's capability with regard to inorganic and carboxylate anions, alkali and alkaline earth cations, and transition metal cations. Preliminary results indicate that CE has an impressive selectivity and trace sensitivity, although considerable methods development remains to be performed.

Mudgett, Paul D.↗
NASA NTRS1997

A Study of the Effects of Blade Shape on Rotor Noise

A new rotor noise prediction system called the Tiltrotor Aeroacoustic Code (TRAC) has been developed under the Short Haul (Civil Tiltrotor) program between NASA, the Army, and the U.S. helicopter industry. This system couples the comprehensive rotorcraft code CAMRAD.Mod1 with either the high resolution sectional loads code HIRES or the full potential CFD code FPRBVI to predict unsteady blade loads, which are then input to the noise prediction program WOPWOP. In this paper, HIRES will be used to predict the blade-vortex interaction (BVI) noise trends associated with blade shape. The baseline shape selected was a 17% scale model of a contemporary design 4 bladed rotor. Measurements for this rotor were acquired in the Duits-Nederslandse Windtunnel (DNW). The code is used to predict noise for the base configuration and the results are compared to the measured data. This provides a firm foundation for investigating the BVI noise trends associated with blade shape. The shapes selected for study are based on variation of sweep and taper which reflect plausible "passive" design concepts. Comparisons of power required, integrated noise, and aerodynamics are made and important trends are noted.

Jones, Henry E.↗
NASA NTRS2005

Surface Sampling System for Low-Gravity Missions

SpaceWorks has identified several sampling missions that could benefit from the technology developed under this project. Requirements were established for the surface sampling system. SpaceWorks teamed with Virginia Tech to identify and select a baseline adhesive suitable for the surface sampling system. SpaceWorks identified Solimide foam as the baseline substrate material. SpaceWorks conducted extensive testing to characterize the performance of the substrate/adhesive combination. A prototype version of the sampler head was designed and built by SpaceWorks.

Preble, Jeffrey C.↗
NASA NTRS2011

Supersonic Retropropulsion Experimental Results from the NASA Langley Unitary Plan Wind Tunnel

A new supersonic retropropulsion experimental effort, intended to provide code validation data, was recently completed in the Langley Research Center Unitary Plan Wind Tunnel Test Section 2 over the Mach number range from 2.4 to 4.6. The experimental model was designed using insights gained from pre-test computations, which were instrumental for sizing and refining the model to minimize tunnel wall interference and internal flow separation concerns. A 5-in diameter 70-deg sphere-cone forebody with a roughly 10-in long cylindrical aftbody was the baseline configuration selected for this study. The forebody was designed to accommodate up to four 4:1 area ratio supersonic nozzles. Primary measurements for this model were a large number of surface pressures on the forebody and aftbody. Supplemental data included high-speed Schlieren video and internal pressures and temperatures. The run matrix was developed to allow for the quantification of various sources of experimental uncertainty, such as random errors due to run-to-run variations and bias errors due to flow field or model misalignments. Preliminary results and observations from the test are presented, while detailed data and uncertainty analyses are ongoing.

Berry, Scott A.↗
DOE OSTI2025

Estimating an executive summary of a time series: the tendency

In this paper, we revisit the problem of decomposing a signal into a tendency and a residual. The tendency describes an executive summary of a signal that encapsulates its notable characteristics while disregarding seemingly random, less interesting aspects. Building upon the Intrinsic Time Decomposition (ITD) and information-theoretical analysis, we introduce two alternative procedures for selecting the tendency from the ITD baselines. The first is based on the maximum extrema prominence, namely the maximum difference between extrema within each baseline. Specifically this method selects the tendency as the baseline from which an ITD step would produce the largest decline of the maximum prominence. The second method uses the rotations from the ITD and selects the tendency as the last baseline for which the associated rotation is statistically stationary. We delve into a comparative analysis of the information content and interpretability of the tendencies obtained by our proposed methods and those obtained through conventional low-pass filtering schemes, particularly the Hodrik–Prescott (HP) filter. Our findings underscore a fundamental distinction in the nature and interpretability of these tendencies, highlighting their context-dependent utility with emphasis in multi-scale signals. Through a series of real-world applications, we demonstrate the computational robustness and practical utility of our proposed tendencies, emphasizing their adaptability and relevance in diverse time series contexts.

Time series analysis↗
NASA NTRS1984

Rendezvous and docking with remote piloted vehicles

The man-in-the-loop control system requirements for the Orbital Maneuvering Vehicle (OMV) are examined. Since many similarities exist between the Teleoperator Retrieval System (TRS) and the unfolding OMV concept, a review of the TRS control system baseline along with selected design trades which led to that baseline are discussed. TRS program issues relevant to the man-in-the-loop control system design include thruster size, communication delays and TV bandwidth compression, range/range rate radar, tumbling targets, shimmed docking interface, and control system definition. A TRS vs. OMV simulation comparative study is summarized, and the major issues currently facing the control system designer on OMV are discussed.

Micheal, J. D.↗