Search NASA⌕ Search

SEARCH · Search NASA

Results for “battery materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Manganese-rich high entropy oxides for lithium-ion batteries:materials design approaches to address voltage fade

Lithium- and manganese-rich oxides are of interest as lithium-ion battery cathode materials as Mn is earth abundant, low cost, and can deliver high capacity. Herein, a high entropy strategy was used to prepare Mn rich high entropy oxide (HEO) materials by including four additional metals (Ni, Co, Fe and Al) in the compositions using a mild co-precipitation method. Two HEOs (Li x Ni 0.1 Mn 0.6 Co 0.1 Al 0.1 Fe 0.1 O y , where x = 1.5 for HEO-L and x = 0.5 for HEO-H) with layered and spinel-layered hybrid structures were investigated where the morphology, elemental composition, structure, atomic level phase distribution, and electrochemistry were determined. The HEO-L samples involve a Li 2 TMO 3 layered structure with ~39% stacking faults. HEO-H is a hybrid structure comprised of 80 wt% spinel and 20 wt% LiMO 2 layered structure. The high entropy manganese-rich HEO-L showed higher capacity and 93% retention of the average voltage after 100 cycles while HEO-H showed higher capacity retention and near 100% average voltage retention. Finally, operando X-ray absorption spectroscopy revealed that the Ni, Co, and Mn are redox active in both materials while the Fe center remains at the Fe 3+ oxidation state throughout cycling, where the changes in the oxidation states for both materials during discharge were consistent with the delivered electrochemical capacity rationalizing the observed electrochemistry.

25 ENERGY STORAGE↗
DOE OSTI2021

Magnetic Compton Scattering Study of Li-Rich Battery Materials

The redox process in a lithium-ion battery occurs when a conduction electron from the lithium anode is transferred to the redox orbital of the cathode. Understanding the nature of orbitals involved in anionic as well as cationic redox reactions is important for improving the capacity and energy density of Li-ion batteries. In this connection, we have obtained magnetic Compton profiles (MCPs) from the Li-rich cation-disordered rock-salt compound LixTi0.4Mn0.4O2 (LTMO). The MCPs, which involved the scattering of circularly polarized hard X-rays, are given by the momentum density of all the unpaired spins in the material. The net magnetic moment in the ground state can be extracted from the area under the MCP, along with a SQUID measurement. Our analysis gives insight into the role of Mn 3d magnetic electrons and O 2p holes in the magnetic redox properties of LTMO.

Suzuki, Kosuke (ORCID:0000000317110604)↗
DOE OSTI2024

Securing Critical Materials for the U.S. Electric Vehicle Industry: A Landscape Assessment of Domestic and International Supply Chains for Five Key Battery Materials

This study explores the prospective supply of upstream critical materials, providing insights into the U.S.'s capacity to meet its Electric Vehicle (EV) and Energy Storage System (ESS) deployment targets for 2035. It evaluates the proportion of critical materials demand that can be met by domestic upstream sources and the amount that will require non-U.S. sources. The analysis considers geological resources and current international development activities, contributing to the understanding of mineral supply security as the global community strives for net-zero emissions by 2050. The study focuses on five materials assessed in the 2023 DOE Critical Materials Assessment – Lithium, Nickel, Cobalt, Graphite, and Manganese.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Exploring battery material failure mechanisms through synchrotron X-ray characterization techniques

Rechargeable battery cycling performance and related safety have been persistent concerns. Here, it is crucial to decipher the capacity fading induced by electrode material failure via a range of techniques. Among these, synchrotron-based X-ray techniques with high flux and brightness play a key role in understanding degradation mechanisms. In this comprehensive review, we summarized recent advancements in degradation modes and mechanisms that revealed by synchrotron X-ray methodologies. Subsequently, an overview of X-ray absorption spectroscopy and X-ray scattering techniques are introduced for the characterizing failure phenomena at local coordination atomic environment and long-range order crystal structure scale, respectively. At last, we envision the future of material failure mechanism exploration.

25 ENERGY STORAGE↗
DOE OSTI2022

Robust Atomic-Resolution Imaging of Lithium in Battery Materials by Center-of-Mass Scanning Transmission Electron Microscopy

The performance of energy storage materials is often governed by their structure at the atomic scale. Conventional electron microscopy can provide detailed information about materials at these length scales, but direct imaging of light elements such as lithium presents a challenge. While several recent techniques allow lithium columns to be distinguished, these typically either involve complex contrast mechanisms that make image interpretation difficult or require significant expertise to perform. In this work, we demonstrate how center-of-mass scanning transmission electron microscopy (CoM-STEM) provides an enhanced ability for simultaneous imaging of lithium and heavier element columns in lithium ion conductors. Through a combination of experiments and multislice electron scattering calculations, we show that CoM-STEM is straightforward to perform and produces directly interpretable contrast for thin samples, while being more robust to variations in experimental parameters than previously demonstrated techniques. As a result, CoM-STEM is positioned to become a reliable and facile method for directly probing all elements within energy storage materials at the atomic scale.

25 ENERGY STORAGE↗
DOE OSTI2022

Machine Learning Modeling for Accelerated Battery Materials Design in the Small Data Regime

Abstract Machine learning (ML)‐based approaches to battery design are relatively new but demonstrate significant promise for accelerating the timeline for new materials discovery, process optimization, and cell lifetime prediction. Battery modeling represents an interesting and unconventional application area for ML, as datasets are often small but some degree of physical understanding of the underlying processes may exist. This review article provides discussion and analysis of several important and increasingly common questions: how ML‐based battery modeling works, how much data are required, how to judge model performance, and recommendations for building models in the small data regime. This article begins with an introduction to ML in general, highlighting several important concepts for small data applications. Previous ionic conductivity modeling efforts are discussed in depth as a case study to illustrate these modeling concepts. Finally, an overview of modeling efforts in major areas of battery design is provided and several areas for promising future efforts are identified, within the context of typical small data constraints.

Sendek, Austin D.↗
DOE OSTI2025

Resistive Switching of Spinel Li 4 Ti 5 O 12 Lithium-Ion Battery Material for Neuromorphic Computing

The rapid rise of AI has exposed significant limitations in conventional Von Neumann computing architecture, particularly in regard to speed and energy efficiency. To address these challenges, researchers are exploring a brain-inspired neuromorphic architecture that mimics biological neural networks, enabling massive parallel processing with reduced power consumption for complex AI computational demands. Recent interest has focused on utilizing battery electrodes and solid electrolyte materials for their resistive switching properties in developing a neuromorphic architecture. These properties are precisely tuned through local- and bulk-level chemical composition modifications via voltage bias stimuli. In this study, we demonstrate fabricating a three-terminal lithium-ion electrochemical transistor based on lithium titanium oxide (Li 4 Ti 5 O 12 ), a popular lithium-ion battery anode material. We deposited and characterized LTO thin films using RF sputtering, demonstrating a 6 orders of magnitude increase in electronic conductivity upon lithiation, with conductivity plateauing after 20% lithiation. Density functional theory calculations revealed transformation from the insulating to conducting state, supported by experimental characterization through X-Ray Photoelectron Spectroscopy (XPS) and Direct Current (DC) polarization analyses. The fabricated transistor consisted of LTO as the channel layer, gold as source/drain terminals, lithium phosphorus oxynitride (LiPON) as the lithium-ion conductor, and copper as the gate terminal. The device exhibited clear hysteresis in transfer characteristics due to lithium insertion/extraction processes. Long-term potentiation (LTP) and long-term depression (LTD) measurements showed an asymmetric ratio of 1.425 and maximum/minimum conductance ratio of 7.83. When implemented in a deep neural network (DNN) for MNIST handwritten digit recognition, the device achieved 92.03% accuracy over 20 training epochs. Detailed transport mechanism analysis revealed the crucial role of oxygen vacancies and interface effects in device operation. Our preliminary findings establish LTO-based lithium-ion electrochemical transistors as promising candidates for energy-efficient neuromorphic computing applications, offering potential solutions to traditional Von Neumann architecture limitations.

25 ENERGY STORAGE↗
DOE OSTI2022

Renewable Solvents to Replace Water in the Synthesis of Battery Materials

Our lab has been engaged in using glycerol to replace water in the synthesis of metal oxides, especially those for use in Li-ion battery. Glycerol is a byproduct from biodiesel production. The U.S. biodiesel manufacturers generate about 1 billion pounds of glycerol yearly, which needs to be utilized for producing value added products. By using glycerol as a solvent, we found that it can replace water to prepare many metal oxide powders. The materials synthesis processes have the potential to significantly reduce manufacturing cost and alleviate the environmental issues with aqueous processes. In this talk, I will present some of our work in materials synthesis using glycerol as a solvent. In particular, I will introduce the work on making active cathode materials for the Li-ion battery.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomic-scale characterization of (electro-)catalysts and battery materials by atom probe tomography

To optimise the performance of heterogeneous (electro-)catalysts and battery electrodes, it is essential to establish the structure-property relationships. This can only be achieved by obtaining a full three-dimensional (3D) characterisation of atomic-scale structure and chemistry of these advanced materials. Atom probe tomography (APT) can provide unique insights into 3D elemental distribution, including low atomic mass elements, with sub-nanometer spatial resolution. Despite its superior chemical analytical capability and spatial resolution, APT has limited applications for sustainable energy materials due to technical and analytical challenges. The recent developments in experimental setups, sample preparation methods and data analysis algorithms have opened the door to the possibility of analysing heterogeneous (electro-)catalysts and battery electrodes. This perspective provides an overview of these developments, exemplified by recent achievements of analyzing model heterogeneous model (electro-)catalysts, nanoparticles, zeolites, MOFs and Li-ion battery electrodes, followed by a discussion of limitations, opportunities, and potentials of APT for future scientific exploration.

atom probe tomography↗
DOE OSTI2023

Meshfree Multiphysics Damage Modeling of Li-ion Battery Materials

Through repeated charging and discharging cycles, the electrodes of a Li-ion battery experience significant swelling and contraction due to the movement of lithium, also known as intercalation. This research focuses specifically on the chemo-mechanical cracking in the cathode. Because cathode particles are comprised of many randomly-oriented grains, which have highly anisotropic material properties, the expansion and contraction is very non-uniform. As a result, stress concentrations tend to form between grains, which necessitates the modeling of crack propagation largely along grain boundaries and material interfaces. Chemo-mechanical damage models are generally simulated by one of two methods: the cohesive zone model (CZM) and the continuous damage model (CDM). The CZM is more accurate at capturing the sharp discontinuities of a crack but is very computationally expensive and intractable for large-scale models as a result. Conversely, the CDM is easily computed but not well-suited to easily allow for discontinuous field variables, which are inherent across a crack. This study aims to improve the CDM's ability to capture discontinuous cracks. Current versions of the CDM use the finite element method (FEM), which is one of the most widely used approaches for spatial discretization. This research investigates the use of the Reproducing Kernel Particle Method (RKPM), a meshfree method, for spatial discretization and aims to achieve a coupled chemo-mechanical crack propagation model that enhances accuracy while maintaining high computational efficiency. This model features a fully coupled, iterative electrochemistry solution, which informs the meshfree damage model of impending crack formation. To gain a better understanding of how the meshfree model compares to the current FEM model in capturing cathode crack propagation, further investigation is needed.

damage modeling↗
DOE OSTI2022

Lithium-Ion Battery Materials as Tunable, “Redox Non-Innocent” Catalyst Supports

The development of general strategies for the electronic tuning of a catalyst’s active site is an ongoing challenge in heterogeneous catalysis. To this end, herein, we describe the application of Li-ion battery cathode and anode materials as redox non-innocent catalyst supports that can be continuously modulated as a function of lithium intercalation. A zero-valent nickel complex was oxidatively grafted onto the surface of lithium manganese oxide (Li x Mn 2 O 4 ) to yield isolated Ni2+ occupying the vacant interstitial octahedral site in the Li diffusion channel on the surface and subsurface of the spinel structure (Ni/Li x Mn 2 O 4 ). Additionally, the activity of Ni/Li x Mn 2 O 4 for olefin hydrogenation, as a representative probe reaction, was found to increase monotonically as a function of support reductive lithiation. Simulation of Ni/Li x Mn 2 O 4 reveals the dramatic impact of surface redox states on the viability of the homolytic oxidative addition mechanism for H 2 activation. Catalyst control through support lithiation was extended to an organotantalum complex on Li x TiO 2 , demonstrating the generality of this phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗