Search NASA⌕ Search

SEARCH · Search NASA

Results for “bliss”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Analysis of a high-performance tubular solar collector

This article analyzes the thermal performance of a new vacuum tube solar collector. The assumptions and mathematical modeling are presented. The problem is reduced to the formulation of two simultaneous linear differential equations characterizing the collector thermal behavior. After applying the boundary conditions, a general solution is obtained which is found similar to the general Hottel, Whillier and Bliss form, but with a complex flow factor. The details of the two-dimensional thermal model of the solar collector at steady state is also presented to include the computer simulation and the performance parameterization. Comparison of the simulated performance with the manufacturer's test data showed good agreement at wide ranges of operating conditions.

Lansing, F. L.↗
NASA NTRS1983

Feasibility study for a generalized gate logic software simulator

Unit-delay simulation, event driven simulation, zero-delay simulation, simulation techniques, 2-valued versus multivalued logic, network initialization, gate operations and alternate network representations, parallel versus serial mode simulation fault modelling, extension of multiprocessor systems, and simulation timing are discussed. Functional level networks, gate equivalent circuits, the prototype BDX-930 network model, fault models, identifying detected faults for BGLOSS are discussed. Preprocessor tasks, postprocessor tasks, executive tasks, and a library of bliss coded macros for GGLOSS are also discussed.

Mcgough, J. G.↗
NASA NTRS1988

Stratospheric composition measurements of earth and Titan using high-resolution tunable diode laser spectroscopy

Field and laboratory measurements of species of atmospheric interest made as part of the JPL diode laser spectroscopy program are presented. Stratospheric measurements of NO2, NO, CO2, and H2O made in November 1985 using the BLISS instrument are reported, together with recent laboratory measurements of spectral line parameters of HNO3 and HO2NO2. In addition, a novel diode laser instrument concept for the in situ sensing of Titan's atmosphere is described for the Saturn Orbiter/Titan Probe (SOTP) Cassini Mission.

Webster, Christopher R.↗
NASA NTRS1990

Laboratory measurements of NO2 line parameters near 1600/cm for the interpretation of stratospheric spectra

Tunable diode laser laboratory measurements of infrared spectral parameters of selected NO2 lines near 1600/cm have been made to assess the contribution of uncertainties in these parameters to stratospheric measurements of NO2 made using the Balloon-Borne Laser In-Situ Sensor (BLISS) tunable diode laser spectrometer. Relative line intensities are measured to accuracies of better than 2 percent, with a root-sum-squared uncertainty in the absolute linestrengths of 4.5 percent. Air-broadening coefficients have been determined from measurements at total pressures in the range 20-100 Torr, at temperatures of 293 K and 214 K. These results are also discussed in the light of the discrepancies between infrared instruments flown in the 1982 and 1983 Balloon Intercomparison Campaigns.

May, R. D.↗
NASA NTRS1994

Hydrochloric acid and the chlorine budget of the lower statosphere

Concentrations of HCl measurements in the lower stratosphere in 1993 by the ALIAS instrument on the ER-2 aircraft reveal that only 40% of inorganic chlorine (Cl(y), inferred from in situ measurements of organic chlorinated sources gases) is present as HCl, significantly lower than model predictions. Although the sum of measured HCl, ClO and ClONO2, the latter inferred from measurements of ClO and NO2 equals Cl(y) to within the incertainty of measurement, it is systematically less than Cl(y) by 30-50%. This discrepancy suggests that concentrations of ClONO2 may exceed those of HC; near 20 km altitude, consistent with a slower photolysis rate for ClONO2 than calculated using recommended cross sections. Comparison of profiles of HCl measured during 1992 and 1193 at mid-latitudes by balloon (BLISS and MARKIV), space shuttle (ATMOS), and satellite (HALOE) instruments with the aircraft data reveal an apparent pressure dependence to the HCl to Cl(y) ratio, consistent with a factor of 3-10 reduction in the photolysis rate for ClONO2 at ER-2 altitudes. However, the diurnal variation of ClO is well-simulated by models using the recommended photolysis rate, and simulations measurements of ClONO2 and HCl at mid-latitudes by ATMOS and MARKIV report HCl (HCL+ ClONO2) ratios greater than or equal to 50%. Premliminary measurements by ALIAS in the southern hemisphere report HCl/Cl(y) values of about 75%.

Webster, C. R.↗
NASA NTRSDate not supplied

Paths of Partial Coherence: Jim Wyant’s Influence on my Profession Career

Writing a tribute paper is fraught with peril. While it is supposed to be about the other’s impact upon your life, in really it cannot help but be all about the author. Back in 2012, after my initial reluctance, the paper I wrote for the Bill Wolfe tribute[1]was so cathartic, that I had to write one for Jim Wyant–to add a chapter to my story, to explain how a path of successes and failures have lead me to the present, and in the process to exorcise more ghosts from my subconscious. While our relationship is complicated, it has always been respectful. In many regards, Jim Wyant may be one of the most important people helping me reach my potential. I am NOT ‘A’ Wyant Student. I am ‘a’ Wyant student. I took three classes from Jim: Interference and Diffraction, Holography and Optical Testing. As a result of those classes, I found something that I loved, something at which I was good, something that became apart of me–I found my technical bliss. And beyond the classroom, my professional career has been inescapably connected with Jim Wyant.

history↗
NASA NTRS2023

Space Biology Beyond LEO Instrumentation & Science Series Science Working Group 2022 Annual Report

Humans are poised to explore deep space: the realm of space beyond Earth's orbit. NASA will soon send humans back to the Moon with the Artemis program, and is developing programs to support crewed missions to Mars. Human exploration of such new environments demands fundamental research that can provide the knowledge necessary to ensure the safety of explorers and aid in the development of a sustainable presence in space. Accordingly, the Agency's Moon to Mars objectives1 include three goals in the area of Human Biological Sciences (HBS-1, -2, -3), with the aim to "Advance understanding of how biology responds to the environments of the Moon, Mars, and deep space to advance fundamental knowledge, support safe, productive human space missions and reduce risks for future exploration." Advancing this understanding is a task that is both complex-- comprising diverse organisms, processes, and methods-- and difficult-- because the very aspects of deep space that we strive to understand are the aspects that make it hard to conduct research in that environment. This report of the Beyond LEO Instrumentation & Science Series Science Working Group (BLISS-SWG) represents input from a group of scientists from diverse disciplines within the space biology research and engineering community on the nature of the science and technology that can be used to achieve those aims.

Space Biology↗
NASA NTRS2023

Autonomous Cargo Management and Distribution for Surface Logistics

The BLiSS: Cargo Management and Retrieval project is a submission to the NASA X-Hab challenge for an autonomous system of cargo storage and retrieval for use on the Lunar Gateway system. The system is designed to stow 5 tonnes of cargo within a capsule that has an internal diameter of 3.2 meters and height of 6 meters for cargo that will be up to 0.8 meters in any one dimension. The system will inventory all cargo items placed in each cargo container and then track the containers using RFID chips for autonomous stowage and retrieval upon request by on-station crew.

Luke McFarling↗
NASA NTRS2018

Arog Dual Purpose Habitat

Vision and Mission Statement Commonality of design between a space transit habitat and Mars surface habitat has the potential to reduce mission cost and risk by reducing crew training and increasing efficiency on arrival. Using the diverse array of talent and expertise available at the University of Michigan, BLiSS will explore the concept of commonality on every level of the design. System Definition We will design a habitation system that will house a human crew on either the Martian surface or a deep space transit. The system will be designed with a high degree of commonality between the two configurations. The team will validate the design through analysis and the construction of full scale mockups.

Nilton De Oliveira Renno↗
NASA NTRS2024

Intelligent Devices/Equipment/Instruments (IDEI) for Enabling Crew Health and Performance on Mars

The Moon to Mars eXploration Systems and Habitation (M2M X-Hab) 2024 Academic Innovation Challenge features a project titled “Intelligent Devices/Equipment/Instruments (IDEI) for Enabling Crew Health and Performance on Mars”. The project calls for the development of prototype IDEIs “that could be used for implementing integrated system health management for Crew Health and Performance (CHP) required for crew living on Mars for extended periods of time”. Thus, the deliverable for the project is not only a prototype exercise device, but also an ontology that provides insight into the best ways to exercise on Mars. To that end, we on the BLiSS team, supported by advisors from industry and academia, set out to ideate an exercise ontology and demonstrate its effectiveness through a functional prototype. To achieve the stakeholders’ requests, the device must operate semi-autonomously, must be an analog for an extant exercise device on Earth, and must provide quantitative information about the exercise and the device’s own state of health. Here, we define “semi-autonomous” as referring to the fact that while the system should be as autonomous as possible, there are some processes that the system cannot fulfill on its own. These include, but are not limited to, user identification, physical exercise reconfiguration, and wearable sensor placement.

llyana Smith↗
DOE OSTI2020

Energy Master Planning for Resilient Public Communities—Best Practices from U.S. Military Installations

Until recently, most planners at military installations addressed energy systems for new facilities on an individual facility basis without consideration of community-wide goals relevant to energy sources, renewables, storage, or future energy generation needs. Building retrofits of public buildings typically do not address energy needs beyond the minimum code requirements making it difficult, if not impossible, to achieve community-level targets on a building-by-building basis. Planning on the basis of cost and general reliability may also fail to deliver community-level resilience. For example, many building code requirements focus on hardening to specific threats, but in a multi-building community, only a few of these buildings may be mission-critical. Over the past two decades, the frequency and duration of regional power outages and water utility disruptions from weather, man-made events, and aging infrastructure have increased. Major disruptions of electric and thermal energy have degraded critical mission capabilities and caused significant economic impacts. In 2016, the U.S. Department of Defense issued guidance that each Service (Army, Navy, Air Force, Marines) complete comprehensive energy plans for the installations that consumed 75% of total building energy. Guidance was updated in 2017 to include metrics for energy resilience, and in some cases, water. This paper describes how community level quantitative and qualitative resilience analysis and metrics have been incorporated into community energy and water planning best practices for military installations in three geographically diverse locations. It is based on research performed under the International Energy Agency’s “Energy in Buildings and Communities Program Annex 73,” focusing on development of guidelines and tools that support the planning of Net Zero Energy Resilient Public Communities as well as research performed under the Department of Defense Environmental Security Technology Certification Program project EW18-D1- 5281, “Technologies Integration to Achieve Resilient, Low- Energy Military Installations.” The first case study reviews progress made on an energy and water planning study conducted at Fort Bliss, Texas. The second and third describes planning conducted at Fort Bragg, North Carolina and the Joint Region Marianas, Guam, respectively, under the updated guidance from 2017 regarding energy and water resilience. Analysis methods, key metrics, and key infrastructure and operational constraints are described, as well as technical, economic and business concepts used during the planning process.

Urban, Angela B.↗
DOE OSTI2021

Designing Modules to Prevent Reverse Bias Degradation in Perovskite Solar Cells when Partial Shading Occurs

When a solar cell in a panel is shaded, the illuminated cells can place a large reverse bias on the shaded cell to attempt to force current through it. Although the panel can continue to produce power, the reverse bias can cause significant problems for the shaded cell. In the case of perovskite solar modules, Joule heating and irreversible electrochemical reactions will degrade the cell. Some photovoltaic technologies use bypass diodes to solve this problem. To prevent both a perovskite cell and an all-perovskite tandem cell from falling into reverse bias breakdown while shaded, no more than two cells per bypass diode are allowed, which is likely to be prohibitively expensive for many applications. Herein, how many solar cells can be protected by one bypass diode in single-junction and multijunction perovskite modules is explored. It is easier to incorporate bypass diodes into modules with singulated cells than with monolithic panels. It is shown that perovskite–silicon tandems can be protected with fewer bypass diodes than with single-junction perovskite modules. Furthermore, it is suggested that if bypass diodes cannot be feasibly incorporated, then the panels should be deployed in utility-scale power plants.

14 SOLAR ENERGY↗
DOE OSTI2020

From Defects to Degradation: A Mechanistic Understanding of Degradation in Perovskite Solar Cell Devices and Modules

Metal halide perovskite solar cells (PSCs) have risen in efficiency from just 3.81% in 2009 to over 25.2% today. While metal halide perovskites have excelled in efficiency, advances in stability are significantly more complex and have progressed more slowly. The advance of efficiency, which is readily measured, over stability, which can require literally thousands of hours to demonstrate, is to be expected given the rapid rate of innovation in the field. In the face of changing absorber composition, synthetic approaches, and device stack components it is necessary to understand basic material properties to rationalize how to enable stability in devices. In this article the aim is to present an in-depth review of the current understanding of metal halide perovskite devices and module stability by focusing on what is known retarding intrinsic and extrinsic degradation mechanisms at the material, device, and module level. Once these considerations are presented the discussion then moves to connecting different degradation mechanisms to stresses anticipated in operation and how they can impact efficiency of cells and ultimately modules over time.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Identification of background limitations to ultra-sensitive $\mathrm{LSC}$ counting through $\mathrm{ICP}$-$\mathrm{MS}$ assay of $\mathrm{LSC}$ cocktails

We report the performance of LSC cocktails in ultra-sensitive applications was evaluated. Backgrounds from radioactive contaminations in commercially available and in-house developed liquid scintillation cocktails were measured and compared to the predicted background levels of the ultra-low background liquid scintillation counter. Through the ICP-MS assay of the cocktails and their constituents, potassium impurities in the surfactant component were identified as a significant source of background, potentially limiting the use of LSC counting in ultra-sensitive applications. This work lays the groundwork for future research towards ultrapure LSC cocktails for ultrasensitive LSC counting

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Impact of lowering potassium contamination in liquid scintillation cocktails for ultra-sensitive radiation detection

Intrinsic 40 K radioactive backgrounds from impurities of natural K in liquid scintillation cocktails have previously been demonstrated to limit their use in ultra-sensitive applications. Here, this work explores two methodologies in parallel for the reduction of 40 K backgrounds in the cocktails, and lays the groundwork for use in ultra-sensitive applications. In one method, alternative low-K liquid scintillation matrix constituents were identified and in the other, a simple purification method for single components and finished cocktails was developed. Both methods were verified via ICP-MS analysis. Liquid scintillation counting of selected purified cocktails demonstrated background reduction, improved stability, and enhanced performance. The best performing purified cocktail was also counted on a custom-built ultra-low background liquid scintillation counter, with results below the detector background.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗