Search NASA⌕ Search

SEARCH · Search NASA

Results for “block polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Particle Dynamics in a Diblock-Copolymer-Based Dodecagonal Quasicrystal and Its Periodic Approximant by X-Ray Photon Correlation Spectroscopy

Temperature-dependent X-ray photon correlation spectroscopy (XPCS) measurements are reported for a binary diblock copolymer blend that self-assembles into an aperiodic dodecagonal quasicrystal (DDQC) and a periodic Frank-Kasper σ phase approximant. The measured structural relaxation times are Bragg scattering wavevector-independent and are five times faster in the DDQC than the σ phase, with minimal temperature dependence. Further, the underlying dynamical relaxations are ascribed to differences in particle motion at the grain boundaries within each of these tetrahedrally close-packed assemblies. These results identify unprecedented particle dynamics measurements of tetrahedrally-coordinated micellar block polymers, thus expanding the application of XPCS to ordered soft materials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Advanced Electron Microscopy of Nanophased Synthetic Polymers and Soft Complexes for Energy and Medicine Applications

After decades of developments, electron microscopy has become a powerful and irreplaceable tool in understanding the ionic, electrical, mechanical, chemical, and other functional performances of next-generation polymers and soft complexes. The recent progress in electron microscopy of nanostructured polymers and soft assemblies is important for applications in many different fields, including, but not limited to, mesoporous and nanoporous materials, absorbents, membranes, solid electrolytes, battery electrodes, ion- and electron-transporting materials, organic semiconductors, soft robotics, optoelectronic devices, biomass, soft magnetic materials, and pharmaceutical drug design. For synthetic polymers and soft complexes, there are four main characteristics that differentiate them from their inorganic or biomacromolecular counterparts in electron microscopy studies: (1) lower contrast, (2) abundance of light elements, (3) polydispersity or nanomorphological variations, and (4) large changes induced by electron beams. Since 2011, the Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory has been working with numerous facility users on nanostructured polymer composites, block copolymers, polymer brushes, conjugated molecules, organic–inorganic hybrid nanomaterials, organic–inorganic interfaces, organic crystals, and other soft complexes. This review crystalizes some of the essential challenges, successes, failures, and techniques during the process in the past ten years. It also presents some outlooks and future expectations on the basis of these works at the intersection of electron microscopy, soft matter, and artificial intelligence. Machine learning is expected to automate and facilitate image processing and information extraction of polymer and soft hybrid nanostructures in aspects such as dose-controlled imaging and structure analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Control of polymer architectures by living ring-opening metathesis copolymerization

In an aspect, a method of synthesizing a graft copolymer comprises the steps of: copolymerizing a first macromonomer and a first reactive diluent; wherein said first macromonomer comprises a first backbone precursor directly or indirectly covalently linked to a first polymer side chain group; wherein said reactive diluent is provided in the presence of the first macromonomer at an amount selected so as to result in formation said graft copolymer having a first backbone incorporating said diluent and said first macromonomer in a first polymer block characterized by a preselected first graft density or a preselected first graft distribution of said first macromonomer. In some embodiments of this aspect, said preselected first graft density is any value selected from the range of 0.05 to 0.75. In some methods, the composition and amount of said diluent is selected to provide both a first preselected first graft density and a first preselected first graft distribution.

Grubbs, Robert H.↗
DOE OSTI2021

Engineering block co-polymer anion exchange membrane domains for highly efficient electrode-decoupled redox flow batteries

We report, anion exchange membranes (AEMs) with high permselectivity, chemical stability and mechanical robustness are a key enabling technology for a variety of electrochemical energy conversion and storage systems such as fuel cells, redox flow batteries and water electrolyzers. Herein we examine well understood chemically stable triblock co-polymer AEMs derived by the chloromethylation (CM-) and subsequent trimethylamine (TMA) functionalization of polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) block co-polymers. We show using small angle X-ray scattering (SAXS) that the introduction of a hydrophobic reinforcement matrix disrupts phase segregation and decreases ionic domain sizes in these AEM separators. The reinforcement matrix simultaneously causes the ultimate tensile strength (UTS) of the reinforced separator to increase by almost 600% compared to the unreinforced form, while maintaining comparable elasticity (ca. 500% elongation at break). Such reinforced r-SEBS30-TMA separators enable electrode-decoupled redox flow batteries (ED-RFBs) with significantly improved lifetimes by decreasing per cycle capacity fade from 0.5% to <0.05%. This 10× improvement in operando permselectivity opens the door to ED-RFBs employing inexpensive elemental actives achieving decades-long usable lifespans.

25 ENERGY STORAGE↗
DOE OSTI2021

Ionic Dopant-Induced Ordering Enhances the Thermoelectric Properties of a Polythiophene-Based Block Copolymer

Conjugated polymer-based block copolymers (CP-BCPs) are an unexplored class of materials for organic thermoelectrics. In this study, the authors report on the electronic conductivity (σ) and Seebeck coefficient (α) of a newly synthesized CP-BCP, poly(3-hexylthiophene)-block-poly (oligo-oxyethylene methacrylate) (P3HT-b-POEM), upon solution co-processing with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and subsequently vapor-doping with a molecular dopant, 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). It is found that the addition of the hydrophilic block POEM greatly enhances the processability of P3HT, enabling homogeneous solution-mixing with LiTFSI. Notably, interactions between P3HT-b-POEM with ionic species significantly improve molecular order and unexpectedly cause electrical oxidizing doping of P3HT block both in solution and solid-states, a phenomenon that has not been previously observed in Li-salt containing P3HT. Vapor doping of P3HT-b-POEM-LiTFSI thin films with F4TCNQ further enhances σ and yields a thermoelectric power factor PF = α 2 σ of 13.0 μW m -1 K -2 , which is more than 20 times higher than salt-free P3HT-b-POEM sample. Through modeling thermoelectric behaviors of P3HT-b-POEM with the Kang-Snyder transport model, the improvement in PF is attributed to higher electronic charge mobility originating from the enhanced molecular ordering of P3HT. The results demonstrate that solution co-processing CP-BCPs with a salt is a powerful method to control structure and performance of organic thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanocomposites Based on Coil-Comb Diblock Copolymers

The polymer chain architecture is an important factor determining the phase behavior of nanoparticle (NP) assembly in polymer matrices. Block copolymers (BCPs) containing a random copolymer (RCP) block present a convenient variation on traditional BCPs to tune the interaction parameters between the polymer blocks and the nanofillers as well as to evaluate the effect of the chain architecture on the NP arrangements within BCP microdomains. Here, we synthesized BCPs with a coil polystyrene (PS) block and a comb RCP block through reversible addition-fragmentation chain transfer polymerization. The RCP block consists of methyl- and lauryl acrylates, the latter of which confers a long-chain alkyl moiety to favorably interact with alkyl-passivated NPs. BCPs showing lamellar, cylindrical, and mixed morphologies were obtained by varying the volume fractions of the RCP block (f RCP ). In comparison to coil-coil BCP, the coil-comb BCPs show highly asymmetric phase behavior with respect to fRCP, where lamellar morphologies were observed at fRCP from 0.31 to 0.51. NPs in the size of 4-5 nm were successfully incorporated in the RCP block of the BCPs with periodicities of 30-60 nm. An order-to-order phase transition from lamellae to PS cylinders was observed after the addition of only 1-2 vol % 5 nm NPs into the BCP with a periodicity of 25 nm and f RCP of 0.51. Self-consistent field theory-density functional theory simulations qualitatively described the observed morphologies and phase transitions in the nanocomposites. Here, the current study presents a platform to fabricate nanocomposites with NP assemblies in coil-comb BCPs that contain a random copolymer block and provides insight into how polymer chain architectures can affect the phase behavior of BCPs and nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2020

3,4‐Dicyanothiophene—a Versatile Building Block for Efficient Nonfullerene Polymer Solar Cells

Abstract In this contribution, a versatile building block, 3,4‐dicyanothiophene (DCT), which possesses structural simplicity and synthetic accessibility for constructing high‐performance, low‐cost, wide‐bandgap conjugated polymers for use as donors in polymer solar cells (PSCs), is reported. A prototype polymer, PB3TCN‐C66, and its cyano‐free analogue polymer PB3T‐C66, are synthesized to evaluate the potential of using DCT in nonfullerene PSCs. A stronger aggregation property in solution, higher thermal transition temperatures with higher enthalpies, a larger dipole moment, higher relative dielectric constant, and more linear conformation are exhibited by PB3TCN‐C66. Solar cells employing IT‐4F as the electron acceptor offer power conversion efficiencies (PCEs) of 11.2% and 2.3% for PB3TCN‐C66 and PB3T‐C66, respectively. Morphological characterizations reveal that the PB3TCN‐C66:IT‐4F blend exhibits better π–π paracrystallinity, a contracted domain size, and higher phase purity, consistent with its higher molecular interaction parameter, derived from thermodynamic calculations. Moreover, PB3TCN‐C66 offers a higher open‐circuit voltage and reduced energy loss than most state‐of‐the‐art wide‐bandgap polymers, without the need of additional electron‐withdrawing substituents. Two additional polymers derived from DCT also demonstrate promising performance with a higher PCE of 13.4% being achieved. Thus, DCT represents a versatile and promising building block for constructing high‐performance, low‐cost, conjugated polymers for application in PSCs.

Zhang, Bo↗
DOE OSTI2023

End block dynamics in unentangled polymers by dielectric spectroscopy

Dielectric spectroscopy measures the dynamics of polymer melts over a broad frequency range. Developing a theory for the spectral shape can extend the analysis of dielectric spectra beyond determining relaxation times from the peak maxima and adds physical meaning to shape parameters determined with empirical fit functions. Toward this goal, we use the experimental results on unentangled poly(isoprene), and unentangled poly(butylene oxide), polymer melts, to test whether the concept of end blocks could be one reason for the Rouse model deviating from experimental data. These end blocks have been suggested by simulations and neutron spin echo spectroscopy and are a consequence of the monomeric friction coefficient depending on the position of the bead in the chain. The concept of an end block is an approximation which partitions the chain in a middle and two end blocks to avoid overparameterization by a continuous position dependent change of the friction parameter. Analysis of dielectric spectra shows that the deviations of the calculated from the experimental normal mode cannot be related to the end block relaxation. However, the results do not contradict an end block hiding below the segmental relaxation peak. Finally, it seems that the results are compatible with an end block being the specific part of the sub-Rouse chain interpretation close to the chain ends.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Probing the interface structure of block copolymer compatibilizers in semicrystalline polymer blends

Abstract The use of block copolymers to compatibilize immiscible plastics is an important strategy for upcycling municipal plastic wastes. Multiblock copolymers (MBCPs) have been proven to be more effective compatibilizers than di‐ and tri‐block copolymers. Herein, we probe the interface structure of an effective multiblock copolymer compatibilizer and compare that with an ineffective triblock copolymer (TBCP). The interface activity of the compatibilizers is understood through a combination of small‐angle neutron and x‐ray scatterings (SANS and SAXS), by using deuterated homopolymer matrix and protonated compatibilizers. SANS analysis suggests that the MBCP forms a thicker interface layer (7–9 nm) than the TBCP (0–4 nm). In addition, SANS data seems to point to a stronger tendency for the MBCP to locate at the interface. Both factors contribute to its effectiveness at compatibilizing immiscible homopolymers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dynamic Bottlebrush Polymer Networks: Self-Healing in Super-Soft Materials

Here, we introduce a design strategy to expand the range of accessible mechanical properties in covalent adaptable networks (CANs) using bottlebrush polymer building blocks. Well-defined bottlebrush polymers with rubbery poly(4-methylcaprolactone) side-chains were crosslinked in formulations that include a bislactone and strong Lewis acid (tin ethylhexanoate). The resulting materials exhibit tunable stress relaxation rates at elevated temperatures (160–180 °C) due to dynamic ester crosslinks that undergo transesterification with residual hydroxy groups. Varying the crosslinker loading or bottlebrush backbone degree of polymerization yields predictable low-frequency shear moduli ca. 10–100 kPa, well below values typical of linear polymer CANs (1 MPa). These extensible networks can be stretched to strains as large as 350% before failure and undergo efficient self-healing to recover >85% of their original toughness upon repeated fracture and melt processing. In summary, molecular architecture creates new opportunities to tailor the mechanical properties of CANs in ways that are otherwise difficult to achieve.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Recyclable polymers from environmentally benign building blocks

Disclosed herein are embodiments of a method for making recyclable polymers and a method for decomposing the polymers back to the monomers which can then be reused. The polymer are stable to aqueous and/or acid conditions and may have a formula II ##STR00001## The method to decompose the polymer back to the monomers may comprise heating the polymer in a protic organic solvent.

Sutton, Andrew D.↗
DOE OSTI2026

Tuning the Mechanical Properties of Crosslinked Copolymers via Sequence and Solvent‐Selective Swelling for Vat Photopolymerization

Block copolymers (BCPs) offer distinct advantages for vat photopolymerization by enabling mechanically programmable network structures through microphase-separated morphologies that can be kinetically trapped during curing, yielding properties unattainable in homogeneous resins. However, the respective roles of repeat-unit sequence and solvent environment, together with their interplay in directing network formation and mechanical performance, remain unclear. Here, we synthesize a series of CO 2 -based polycarbonate copolymers comprising a crosslinkable glassy poly(vinyl cyclohexene carbonate) (PVCHC, A block) and a non-crosslinkable soft poly(propylene carbonate) (PPC, B block). The polymer sequence is systematically varied (ABA, BAB, and statistical), and solvent choice controls block-selective swelling to jointly control gelation behavior, microphase morphology, and mechanical response through changes in the accessibility and local environment of photocrosslinkable vinyl groups during network formation, as revealed by photorheology and small angle x-ray scattering. By tuning polymer sequence and curing solvent, we transform nominally identical formulations from brittle to highly ductile materials, achieving a three-orders-of-magnitude range in toughness (0.003 to 9.1 MJ m −3 ). These results establish clear structure–processing–property relationships and identify polymer sequence and selective solvation as powerful strategies for programming both printability and performance of block copolymer resins for additive manufacturing.

additive manufacturing↗
DOE OSTI2024

Control over Conformational Landscapes of Polypeptoids by Monomer Sequence Patterning

The ability to program chain conformation and structure through control over the monomer sequence of synthetic polymers has broad implications for next-generation material design. While related problems of protein-folding and de novo design have generated accurate predictions of 3D folded chain structures, generalization to synthetic polymers remains intractable due to the requirement of large structural databases and the intrinsically disordered nature of polymer building blocks. In this work, polypeptoids, a class of peptidomimetic synthetic polymers, are utilized to build a general workflow for the study of relationships between monomer sequence and dynamic 3D chain structure in solution. Furthermore, this work demonstrates how control over the monomer sequence can alter the conformational landscape of synthetic polymers to deviate dramatically from classical chain statistics. Specifically, the distribution of end-to-end distances, as measured by double electron-electron resonance spectroscopy in dilute solvent, is systematically skewed towards shorter distances with an increasing number of hydrophobes and further refined by hydrophobe arrangement in amphiphilic polypeptoid chains.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Accessibility and Mechanical Stability of Nanoporous Zinc Oxide and Aluminum Oxide Coatings Synthesized via Infiltration of Polymer Templates

The conformal nanoporous inorganic coatings with accessible pores that are stable under applied thermal and mechanical stresses represent an important class of materials used in the design of sensors, optical coatings, and biomedical systems. Here, we synthesize porous AlO x and ZnO coatings by the sequential infiltration synthesis (SIS) of two types of polymers that enable the design of porous conformal coatings—polymers of intrinsic microporosity (PIM) and block co-polymer (BCP) templates. Using quartz crystal microbalance (QCM), we show that alumina precursors infiltrate both polymer templates four times more efficiently than zinc oxide precursors. Using the quartz crystal microbalance (QCM) technique, we provide a comprehensive study on the room temperature accessibility to water and ethanol of pores in block copolymers (BCPs) and porous polymer templates using polystyrene-block-poly-4-vinyl pyridine (PS75-b-P4VP25) and polymers of intrinsic microporosity (PIM-1), polymer templates modified by swelling, and porous inorganic coatings such as AlO x and ZnO synthesized by SIS using such templates. Importantly, we demonstrate that no structural damage occurs in inorganic nanoporous AlO x and ZnO coatings synthesized via infiltration of the polymer templates during the water freezing/melting cycling tests, suggesting excellent mechanical stability of the coatings, even though the hardness of the inorganic nanoporous coating is affected by the polymer and precursor selections. We show that the hardness of the coatings is further improved by their annealing at 900 °C for 1 h, though for all the cases except ZnO obtained using the BCP template, this annealing has a negligible effect on the porosity of the material, as is confirmed by the consistency in the optical characteristics. These findings unravel new potential for the materials being used across various environment and temperature conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Approaching disorder-tolerant semiconducting polymers

Doping has been widely used to control the charge carrier concentration in organic semiconductors. However, in conjugated polymers, n-doping is often limited by the tradeoff between doping efficiency and charge carrier mobilities, since dopants often randomly distribute within polymers, leading to significant structural and energetic disorder. Here, we screen a large number of polymer building block combinations and explore the possibility of designing n-type conjugated polymers with good tolerance to dopant-induced disorder. We show that a carefully designed conjugated polymer with a single dominant planar backbone conformation, high torsional barrier at each dihedral angle, and zigzag backbone curvature is highly dopable and can tolerate dopant-induced disorder. With these features, the designed diketopyrrolopyrrole (DPP)-based polymer can be efficiently n-doped and exhibit high n-type electrical conductivities over 120 S cm -1 , much higher than the reference polymers with similar chemical structures. This work provides a polymer design concept for highly dopable and highly conductive polymeric semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Poly(ionic liquid)s with Dicationic Pendants as Gas Separation Membranes

Poly(norbornene)s and poly(ionic liquid)s are two different classes of attractive materials, which are known for their structural tunability and thermal stabilities, and have been extensively studied as gas separation membranes. The incorporation of ionic liquids (ILs) into the poly(norbornene) through post-polymerization has resulted in unique materials with synergistic properties. However, direct polymerization of norbornene-containing IL monomers as gas separation membranes are limited. To this end, a series of norbornene-containing imidazolium-based mono- and di-cationic ILs (NBM-mIm and NBM-DILs) with different connectivity and spacer lengths were synthesized and characterized spectroscopically. Subsequently, the poly(NBM-mIm) with bistriflimide [Tf2N−] and poly([NBM-DILs][Tf2N]2) comprising homo-, random-, and block- (co)polymers were synthesized via ring-opening metathesis polymerization using the air-stable Grubbs second-generation catalyst. Block copolymers (BCPs), specifically, [NBM-mIM][Tf2N] and [NBM-ImCnmIm] [Tf2N]2 (n = 4 and 6) were synthesized at two different compositions, which generated high molecular weight polymers with decent solubility relative to homo- and random (co)polymers of [NBM-DILs] [Tf2N]2. The prepared BCPs were efficiently analyzed by a host of analytical tools, including 1H-NMR, GPC, and WAXD. The successfully BCPs were cast into thin membranes ranging from 47 to 125 μm and their gas (CO2, N2, CH4, and H2) permeations were measured at 20 °C using a time-lag apparatus. These membranes displayed modest CO2 permeability in a non-linear fashion with respect to composition and a reverse trend in CO2/N2 permselectivity was observed, as a usual trade-off behavior between permeability and permselectivity.

59 BASIC BIOLOGICAL SCIENCES↗