SEARCH · Search NASA

Results for “buoy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Performance estimation of resonance-enhanced dual-buoy wave energy converter using coupled time-domain simulation

This article presents the modeling methodology and performance evaluation of the resonance-enhanced dual-buoy WEC (Wave Energy Converter) by HEM (hydrodynamic & electro-magnetic) fully-coupled-dynamics time-domain-simulation program. The numerical results are systematically compared with the authors’ 1/6-scale experiment. With a direct-drive linear generator, the WEC consists of dual floating cylinders and a moon-pool between the cylinders, which can utilize three resonance phenomena from moon-pool dynamics as well as heave motions of inner and outer buoys. The contact and friction between the two buoys observed in the experiment are also properly modeled in the time-domain simulation by the Coulomb-friction model. Moon-pool resonance peaks significantly exaggerated in linear potential theory are empirically adjusted through comparisons with measured values. A systematic comparative study between the simulations and experiments with and without PTO (power-take-off) is conducted, and the relative heave displacements/velocities and power outputs are well matched. Then, parametric studies are carried out with the simulation program to determine optimum generator parameters. The performance with various wave conditions is also assessed.

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

Evaluation of coupled wind-wave model simulations of offshore winds in the Mid-Atlantic Bight using lidar-equipped buoys.

From 2014 to 2017, two Department of Energy buoys equipped with Doppler lidar were deployed off the U.S. East Coast to provide long term measurements of hub-height wind speed in the marine environment. In this study, we performed simulations of selected cases from the deployment using a 5-km configuration of the Weather Research and Forecasting (WRF) model, to see if simulated hub height speeds could produce closer agreement with the observations than existing reanalysis products. For each case we performed two additional simulations: one in which marine surface roughness height was one-way coupled to forecast wave parameters from a standalone WaveWatch III (WW3) simulation, and another in which WRF and WW3 were two-way coupled using the Coupled-Ocean-Atmosphere-Wave-Sediment-Transport (COAWST) framework. It was found that all the 5-km WRF simulations improved 90-m wind speed statistics for the tropical cyclone case of 08 May 2015 and the cold frontal case of 25 Mar 2016, but not the nor-easter of 18 Jan 2016. The impact of wave coupling on buoy-level (4 m) wind speed was modest and case dependent, but when present, the impact was typically seen at 90 m as well, being as large as 10% in stable conditions. One-way wave coupling consistently reduced wind speeds, improving biases for 25 Mar 2016 but worsening them for 08 May 2015. Two-way wave coupling mitigated these negative biases, improved wave field representation and statistics, and mostly improved 4-m wind field correlation coefficients, at least at the VA buoy, largely due to greater self-consistency between wind and wave fields.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

California - Auxiliary Datasets for Buoy (120), Humboldt / Derived Data

This dataset compiles results from different model-based hindcasts and instruments that measure environmental variables at the location of the associated lidar buoys. This dataset complements the lidar buoy measurements by providing longer time histories of selected environmental parameters. The data were extracted from the closest grid point to the average lidar buoy position. The data were obtained from the public domain and references to the originators/owners are provided under each instrument.

17 WIND ENERGY↗

DOE OSTI2022

California - Auxiliary Datasets for Buoy (130), Morro Bay / Derived Data

17 WIND ENERGY↗

DOE OSTI2023

Buoy - California - Wind Sentinel (120), Humboldt - Processed Data

The purpose of the dataset is to provide preliminary filtered, averaged lidar data and standardize the data format of various datastreams from the buoy into NetCDF. The attached Lidar Buoy Data Dictionary provides further details on the various instruments mounted on the buoys, parameters measured by each instrument, and the frequency of data collection.

17 WIND ENERGY↗

NASA NTRS1972

A Preliminary Study of a Buoy System for Acquisition, Transmission, and Management of Hydrological Data Obtained from In-situ Measurements

The requirements for a system of remotely located, data collection buoys are considered first for a prototype system to be used in conjunction with the Earth Resources Technology Satellite (ERTS-A), and then for a more advanced system. The necessary sensor characteristics for compatibility with the ERTS-A data collection platforms are considered, as well as possible sites for location of the prototype buoys. The advanced system is considered from the standpoint of continuous data collection both through satellite data relay and ground telemetry systems. Management of the data from a buoy system is analyzed, especially with regard to the advanced system.

Elliott, J. M.↗

NASA NTRS1973

The Arctic data buoy. A system for environmental monitoring in the Arctic

An automated data buoy system for environmental monitoring in the Arctic was developed. The buoy is designed to operate for a minimum of 1 year providing position and environmental data through polar-orbiting satellite telecommunications. It can be deployed by a two or three man crew using a small aircraft. It is capable of operating in both free-floating and frozen-in situations. An experimental unit successfully completed a 5-month test at Fletcher's Ice Island (T-3) during the winter of 1971-72 and six units were deployed in the Arctic during the spring of 1972. Results to data have demonstrated the utility of the basic design, the effectiveness of the satellite communications, and the feasibility of deploying and operating a large array of such buoy systems in the Arctic Ocean.

Haugen, D. P.↗

NASA NTRS1972

Data report of six free-drifting buoys tracked by the Eole satellite in the western North Atlantic Ocean in the autumn of 1972

The buoys were deployed on the Continental Shelf east of the Chesapeake Light and were tracked by the French EOLE satellite. Two buoys drifted for 11 days during the first mission and four buoys drifted for 14 days during the second mission. Trajectory and water temperature data are presented in tabular and graphical from with a discussion of the accuracy.

Usry, J. W.↗

NASA NTRS1974

Earth resources technology satellite /ERTS/ data collection and transmission buoys for inland, neritic and oceanic waters

As a result of a consortium of several industries and organizations, an economical, versatile, and stable data collection and transmission buoy has been designed, developed, and deployed to gather and transmit water quality data to a ground receiving station at three-minute intervals and to the earth resources technology satellite (ERTS) as it passes over the deployed buoy every 12 hours. The buoy system, designed for both fresh and salt water application, gathers data inclusive of temperature measurement, conductivity, relative acidity, dissolved oxygen, current speed, and direction. The mechanical design philosophy used to determine and satisfy boundary conditions involving stability, ease of deployment, servicing and maintenance, minimal manufacturing costs, and fresh and salt water installation capability is discussed. The development of peripheral handling equipment and anchoring systems is described.

Chapman, W. S.↗

NASA NTRS1976

Design, fabrication and systems integration of a satellite tracked, free-drifting ocean data buoy

Engineering details are presented of a small free-drifting buoy configuration designed for use in the study of continental shelf water circulation patterns in the Chesapeake Bight of the Western North Atlantic Ocean. The buoy incoporated French instrumentation and was interrogated by the French EOLE satellite to provide position and four channels of temperature data. The buoy design included a variable depth drogue and a power supply sufficient for six weeks of continuous operations. Proof tests of the configuration indicated an adequate design and subsequent field experiments verified the proper functioning of the system.

Wallace, J. W.↗

NASA NTRS1976

Arctic odyssey - Five years of data buoys in AIDJEX

The Arctic Ice Dynamics Joint Experiment of 1975-1976 used data bouys in conjunction with tracking satellites to study the interaction of Arctic Sea ice with the environment, and, more specifically, to define the motion of ice on the perimeter of the area of interest and to measure surface barometeric pressure over the same area. Charts are presented, indicating the position of the buoy array along with a table detailing buoy characteristics. The position fix accuracy of RAMS (Random Access Measurement System) buoys is discussed together with position errors due to the along-track motion of the observing satellites. Polar satellite data collection and tracking efficiency is assessed together with satellite system flexibility concepts.

Martin, P.↗

NASA NTRS1978

An atlas of GEOS-3 radar altimeter data for data buoy comparison studies

An atlas is compiled to identify times and dates when GEOS-3 altimeter data was taken in the vicinity of data buoys. The time period covered is from GEOS launch to April 9, 1978. Two buffer areas are considered for each of the various buoy locations to determine the simultaneity of GEOS and buoy data. The two buffer areas are ? or - 0.25 degrees and ? or - 1 degree.

Stanley, H. R.↗

NASA NTRS1978

Outfall siting with dye-buoy remote sensing of coastal circulation

A dye-buoy remote sensing technique has been applied to estuarine siting problems that involve fine-scale circulation. Small hard cakes of sodium fluorescein and polyvinyl alcohol, in anchored buoys and low-windage current followers, dissolve to produce dye marks resolvable in 1:60,000 scale color and color infrared imagery. Lagrangian current vectors are determined from sequential photo coverage. Careful buoy placement reveals surface currents and submergence near fronts and convergence zones. The technique has been used in siting two sewage outfalls in Hampton Roads, Virginia: In case one, the outfall region during flood tide gathered floating materials in a convergence zone, which then acted as a secondary source during ebb; for better dispersion during ebb, the proposed outfall site was moved further offshore. In case two, flow during late flood was found to divide, with one half passing over shellfish beds; the proposed outfall site was consequently moved to keep effluent in the other half.

Munday, J. C., Jr.↗

NASA NTRS1994

Calibration of the TOPEX altimeter using a GPS buoy

The use of a spar buoy equipped with a Global Positioning System (GPS) antenna to calibrate the height measurement of the TOPEX radar altimeter is described. In order to determine the height of the GPS antenna phase center above the ocean surface, the buoy was also equipped with instrumentation to measure the instantaneous location of the waterline, and tilt of the bouy from vertical. The experiment was conducted off the California coast near the Texaco offshore oil platform, Harvest, during cycle 34 of the TOPEX/POSEIDON observational period. GPS solutions were computed for the bouy position using two different software packages, K&RS and GIPSY-OASIS II. These solutions were combined with estimates of the waterline location on the bouy to yield the height of the ocean surface. The ocean surface height in an absolute coordinate system combined with knowledge of the spacecraft height from tracking data provides a computed altimeter range measurement. By comparing this computed value to the actual altimeter measurement, the altimeter bias can be calibrated. The altimeter height bias obtained with the buoy using K&RS was -14.6 +/- 4 cm, while with GIPSY-OASIS II it was -13.1 +/- 4 cm. These are 0.1 cm and 1.6 cm different from the -14.7 +/- 4 cm result obtained for this flight overflight with the tide gauge instruments located on Platform Harvest.

Born, G. H.↗

NASA NTRS2003

Simultaneous Ocean Wave Measurements by the JASON and TOPEX Satellites, With Buoy and Model Comparisons

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. We here examine simultaneous significant wave height measurements by the Jason-1 and Topex/Poseidon altimeters. These data are also compared with in-situ measurements from deep-ocean buoys and with predicted wave heights from the WaveWatch 111 operational model. The rms difference between Jason and Topex wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding Topex by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between Topex and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that Topex wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5m; Jason heights in general are 3% smaller than Topex. Spurious dips in the Topex density function for 3- and 6-meter waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.

Ray, R. D.↗

DOE OSTI2020

Mid-Atlantic Bight Wave Hindcast To Support DOE Lidar Buoy Deployments: Model Validation

This study presents a shelf scale wave hindcast for the Mid-Atlantic Bight to provide accurate wave data to complement the measured data gathered by two DOE lidar buoy deployments off the coasts of Virginia and New Jersey. PNNL developed a ~2 km resolution model based on Wavewatch III and forced with analyzed winds and ocean currents; and executed a four-year hindcast for the period from January 2014 to December 2017. The model results are compared well against 16 wave-measuring buoys and data derived from six satellite-borne radar altimeters. In addition, the model results for two storm events that generated large waves, Hurricane Hermine and the January 2016 Blizzard, are discussed in detail.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Buoy Lidar - Massachusetts - Wind Sentinel (120) - Raw Data

This is the data collected during the validation period. The buoy is scheduled to be deployed near Martha's Vinyard in mid-January 2020. Data from the buoy itself are contained in 2 files labeled "primary" and "secondary".

17 WIND ENERGY↗

DOE OSTI2023

Buoy - Massachusetts - Wind Sentinel (130) - Raw Data

This is the data collected during the validation period. The buoy is scheduled to be deployed near Martha's Vinyard in mid-January 2020. Data collected from buoy instruments are contained in two files labeled “primary” and secondary.” Header information for these files can be found in the respective tabs in the Excel spreadsheet under Attachments.

17 WIND ENERGY↗