Search NASA⌕ Search

SEARCH · Search NASA

Results for “camelina”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

54 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Nonspecific phospholipase C6 increases seed oil production in oilseed Brassicaceae plants

Summary Plant oils are valuable commodities for food, feed, renewable industrial feedstocks and biofuels. To increase vegetable oil production, here we show that the nonspecific phospholipase C6 (NPC6) promotes seed oil production in the Brassicaceae seed oil species Arabidopsis, Camelina and oilseed rape. Overexpression of NPC6 increased seed oil content, seed weight and oil yield both in Arabidopsis and Camelina, whereas knockout of NPC6 decreased seed oil content and seed size. NPC6 is associated with the chloroplasts and microsomal membranes, and hydrolyzes phosphatidylcholine and galactolipids to produce diacylglycerol. Knockout and overexpression of NPC6 decreased and increased, respectively, the flux of fatty acids from phospholipids and galactolipids into triacylglycerol production. Candidate‐gene association study in oilseed rape indicates that only BnNPC6.C01 of the four homeologues NPC6s is associated with seed oil content and yield. Haplotypic analysis indicates that the BnNPC6.C01 favorable haplotype can increase both seed oil content and seed yield. These results indicate that NPC6 promotes membrane glycerolipid turnover to accumulate TAG production in oil seeds and that NPC6 has a great application potential for oil yield improvement.

Cai, Guangqin↗
DOE OSTI2021

Developing Cost Effective Biological Removal Technology for Selenium and Nitrate from Flue Gas Desulfurization Wastewater from an Existing Power Facility

Funding from this project supported new research in environmental biotechnology at WVSU Energy and Environmental Science Institute (WVSUEESI) to develop biological treatment techniques for FGD wastewater using photosynthetic organisms algae and plants. We tested the possibility of using algae and plants in treating FGD wastewater. Results suggested that algae and plants could able to perform normal photosynthesis under low concentrations of selenium. However, higher concentrations of selenium are lethal on photosynthesis. The total protein data indicated that FGD wastewater induced the accumulation of complete proteins in the duckweeds compared to control plants. It appears that nitrate, nitrates, and other compounds in FGD wastewater promote total protein accumulation. The FGD wastewater treatment has triggered Triacylglycerols (TAG) and carbohydrate accumulation in duckweed. We studied the differential gene expression using RNA-Sequencing data. Gene expression analysis revealed that glycolysis, fatty acid, triacylglycerol biosynthesis, and starch degradation were up-regulated; on the contrary, gluconeogenesis, photosynthesis, and starch biosynthesis genes were down-regulated by FGD wastewater treatment. We confirmed the expression of some of these genes using q-RT PCR analysis. We demonstrated that when FGD gypsum was blended with the coal mine soil to grow the bioenergy crop, Camelina, it could grow and produce seed. Moreover, Camelina is a non-edible oilseed crop and has heavy metal sequestering properties, making it the right reclamation choice. Besides, this project provided the opportunity for WVSU undergraduates to integrate hands-on research and education. Funding from this grant helped us to enhance student hands-on experience in water quality and environmental science and participation in STEM research and education.

09 BIOMASS FUELS↗
DOE OSTI2023

Daylength variation affects growth, photosynthesis, leaf metabolism, partitioning, and metabolic fluxes

Abstract Daylength, a seasonal and latitudinal variable, exerts a substantial impact on plant growth. However, the relationship between daylength and growth is nonproportional, suggesting the existence of adaptive mechanisms. Thus, our study aimed to comprehensively investigate the adaptive strategies employed by plants in response to daylength variation. We grew false flax (Camelina sativa) plants, a model oilseed crop, under long-day (LD) and short-day (SD) conditions and used growth measurements, gas exchange measurements, and isotopic labeling techniques, including 13C, 14C, and 2H2O, to determine responses to different daylengths. Our findings revealed that daylength influences various growth parameters, photosynthetic physiology, carbon partitioning, metabolic fluxes, and metabolite levels. SD plants employed diverse mechanisms to compensate for reduced CO2 fixation in the shorter photoperiod. These mechanisms included enhanced photosynthetic rates and reduced respiration in the light (RL), leading to increased shoot investment. Additionally, SD plants exhibited reduced rates of the glucose 6-phosphate (G6P) shunt and greater partitioning of sugars into starch, thereby sustaining carbon availability during the longer night. Isotopic labeling results further demonstrated substantial alterations in the partitioning of amino acids and TCA cycle intermediates between rapidly and slowly turning over pools. Overall, the results point to multiple developmental, physiological, and metabolic ways in which plants adapt to different daylengths to maintain growth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Rapid quantification of whole seed fatty acid amount, composition, and shape phenotypes from diverse oilseed species with large differences in seed size

Seed oils are widely used in the food, biofuel, and industrial feedstock industries, with their utility and value determined by total oil content and fatty acid composition. Current high throughput seed oil analysis methods either lack accuracy in total fatty acid profiling or require extensive labor for lipid extraction prior to derivatization to fatty acid methyl esters (FAME) and quantification by gas chromatography (GC). Alternatively, direct whole seed FAME production methods have been developed for the very small seeds in the model species Arabidopsis thaliana but these have generally not been adapted to larger seeds of most oilseed crops. High-throughput direct whole seed FAME production methods were optimized for seeds up to 5 mg each utilizing acid-catalyzed esterification. For the oilseed species Camelina sativa, Thlaspi avernse (pennycress), Cuphea viscosissima, and Brassica napus (var. Canola), the total seed fatty acid content and composition from direct seed esterification to FAME matched that of lipid extract derivatization demonstrating the accuracy of the methods. In combination with seed phenotyping using GridFree, this approach enabled the development of a rapid pipeline for simultaneous seed weight, count, size/shape phenotyping, and oil analysis. For the larger and tougher seeds produced by Limnanthes alba (Meadowfoam) and Cannabis sativa L. (hemp) the whole seed acid-based method proved insufficient, and prior laborious homogenization of seeds was required. Therefore, a rapid one-tube bead homogenization and base catalyzed-esterification method was developed. Base-derived fatty acid esterification cannot derivatize free fatty acids leading to slightly lower total seed fatty acid than acid-catalyzed methods, however the seed oil content and fatty acid composition that is valuable for screening large numbers of samples in research populations was accurately measured. New rapid whole seed fatty acid esterification and phenotyping protocols were developed to accurately assess oilseed lipid content. These methods are particularly valuable in oilseed research, breeding, and engineering applications where efficient analysis of large numbers of samples and accurate oil fatty acid profiling is essential. While having been developed for current and emerging oilseed crops, these methods also provide a foundation from which protocols might be established for new and emerging crop species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Life-cycle analysis of sustainable aviation fuel production through catalytic hydrothermolysis

Catalytic hydrothermolysis (CH) is a sustainable aviation fuel (SAF) pathway that has been recently approved for use in aircraft fuel production. In alignment with broader sustainable aviation goals, SAF production through CH requires a quantitative assessment of carbon intensity (CI) impacts. In this study, a current-day life-cycle analysis (LCA) was performed on SAF produced via CH to determine the CI. Various oily feedstocks were considered, including vegetable oils (soybean, carinata, camelina and canola) and low-burden oils and greases (corn oil, yellow grease and brown grease). Life-cycle inventory data were collected on all processes within the CH LCA boundary: feedstock cultivation and/or collection, preprocessing, hydrothermal cleanup and CH, biocrude refining, fuel transportation and end use through combustion. Baseline results show that the CH-produced SAF can be generated with CI reductions ranging from 48 to 82% compared with conventional jet fuel. Modest improvements to CI can be achieved through incremental changes to the brown grease CH process, such as relaxing the dewatering specification and implementing renewable natural gas and electricity, which could decrease the CI from 22.9 to 7.9 g CO 2 e/MJ. Total CH fuel production potential was also assessed on the basis of current or near-future feedstock availability and CI. The total biofuel production potential of CH (SAF and renewable fuel co-products) in the US sums to approximately 3487 million gallons per year, with 97% of these volumes having a CI below 50% of that for petroleum jet fuel. The study shows that from an LCA perspective, CH offers a viable SAF pathway that is comparable with existing SAF pathways like hydroprocessed esters and fatty acids.

09 BIOMASS FUELS↗
DOE OSTI2024

Evaluating the contribution of plant metabolic pathways in the light to the ATP:NADPH demand using a meta-analysis of isotopically non-stationary metabolic flux analyses

Abstract Balancing the ATP: NADPH demand from plant metabolism with supply from photosynthesis is essential for preventing photodamage and operating efficiently, so understanding its drivers is important for integrating metabolism with the light reactions of photosynthesis and for bioengineering efforts that may radically change this demand. It is often assumed that the C3 cycle and photorespiration consume the largest amount of ATP and reductant in illuminated leaves and as a result mostly determine the ATP: NADPH demand. However, the quantitative extent to which other energy consuming metabolic processes contribute in large ways to overall ATP: NADPH demand remains unknown. Here, we used the metabolic flux networks of numerous recently published isotopically non-stationary metabolic flux analyses (INST-MFA) to evaluate flux through the C3 cycle, photorespiration, the oxidative pentose phosphate pathway, the tricarboxylic acid cycle, and starch/sucrose synthesis and characterize broad trends in the demand of energy across different pathways and compartments as well as in the overall ATP:NADPH demand. These data sets include a variety of species including Arabidopsis thaliana , Nicotiana tabacum , and Camelina sativa as well as varying environmental factors including high/low light, day length, and photorespiratory levels. Examining these datasets in aggregate reveals that ultimately the bulk of the energy flux occurred in the C3 cycle and photorespiration, however, the energy demand from these pathways did not determine the ATP: NADPH demand alone. Instead, a notable contribution was revealed from starch and sucrose synthesis which might counterbalance photorespiratory demand and result in fewer adjustments in mechanisms which balance the ATP deficit.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Persistent fatty acid catabolism during plant oil synthesis

Plant lipids are an essential energy source for diets and are a sustainable alternative to petroleum-based fuels and feedstocks. Fatty acid breakdown during seed germination is crucial for seedling establishment but unexpected during seed filling. Here, we demonstrate that the simultaneous biosynthesis and degradation of fatty acids begins early and continues across all phases of oil filling and throughout the photoperiod. Tests in camelina, rapeseed, and an engineered high-oil tobacco line confirmed that concomitant synthesis and breakdown in oil-producing tissues over development is the rule rather than the exception. Furthermore, we show that transgenics, designed to elevate fatty acid biosynthesis, failed to achieve anticipated increases in storage lipid levels due to increased degradation, potentially explaining the underperformance of engineered lines compared to expectations more generally.

coenzyme A↗
DOE OSTI2025

OzMALDI: A Gas-Phase, In-Source Ozonolysis Reaction for Efficient Double-Bond Assignment in Mass Spectrometry Imaging with Matrix-Assisted Laser Desorption/Ionization

Lipids make up an important class of biomolecules with diverse structures and varied chemical functions. This diversity is a major challenge in chemical analysis and limits our understanding of biological functions and regulation. A major way lipid isomers differ is by double-bond (db) position, and analyzing db-isomers is especially challenging for mass spectrometry imaging (MSI). Ozonolysis can be used to determine the dbposition and has been paired with MSI before. However, previous techniques require increased analysis time to allow for gas-phase reactions within an ion trap or ion mobility cell or additional sample preparation time to allow for offline ozonation. Here, we introduce a new ozonolysis method inside the matrix-assisted laser desorption-ionization (MALDI) source, termed OzMALDI, that simultaneously produces ozonides from all unsaturated lipids. This allows us to determine db-positions without adding additional reaction time while maintaining the high mass resolution provided by Orbitrap MS. This new technique is especially effective at determining multiple db-positions in lipids containing polyunsaturated fatty acids, which is a limitation of many previous techniques. OzMALDI-MSI was applied to the analysis of rat brain and genetically engineered Camelina and soybean seed samples, demonstrating the utility of this method and uncovering novel biological information.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Impact of Biofuel Blends on Black Carbon Emissions from a Gas Turbine Engine

With a view towards renewable feedstock while decreasing the CO2 footprint associated with jet travel, biofuels are receiving increasing interest. Presented here is an overview of non-volatile particulate matter (nvPM) emissions, i.e. “soot” as gauged by varied TEM analyses for a J-85 turbojet fueled with Jet-A as well as with blends of Jet-A using Camelina biofuel. A unifying explanation is provided encompassing fuels and spanning length scales across three orders of magnitude. The variation of primary particle size, aggregate size and nanostructure are analyzed as a function of biofuel blend across range of engine thrust levels. The postulate is based on where fuels start along the soot formation pathway. Increasing biofuel content lowers aromatic concentration while placing increasing dependence upon fuel pyrolysis reactions to form the requisite concentration of aromatics for particle inception and growth. The required “kinetic” time for pyrolysis reactions to produce benzene and multi-ring PAHs allows increased fuel-air mixing by turbulence, diluting the fuel-rich soot-forming regions, effectively lowering their equivalence ratio. With a lower precursor concentration, particle inception is slowed, the resulting concentration of primary particles is lowered and smaller aggregates. The lower equivalence ratio also results in smaller primary particles given the lower concentration of growth species.

Kumal, Raju R.↗
DOE OSTI2025

The effects of photosynthetic rate on respiration in light, starch/sucrose partitioning, and other metabolic fluxes within photosynthesis

In the future, plants may encounter increased light and elevated CO 2 levels. How consequent alterations in photosynthetic rates will impact fluxes in photosynthetic carbon metabolism remains uncertain. Respiration in light ( R L ) is pivotal in plant carbon balance and a key parameter in photosynthesis models. Understanding the dynamics of photosynthetic metabolism and R L under varying environmental conditions is essential for optimizing plant growth and agricultural productivity. However, measuring R L under high light and high CO 2 (HLHC) conditions poses challenges using traditional gas exchange methods. In this study, we employed isotopically nonstationary metabolic flux analysis (INST-MFA) to estimate RL and investigate photosynthetic carbon flux, unveiling nuanced adjustments in Camelina sativa under HLHC. Despite numerous flux alterations in HLHC, RL remained stable. HLHC affects several factors influencing RL, such as starch and sucrose partitioning, v o /v c ratio, triose phosphate partitioning, and hexose kinase activity. Analysis of A/C i curve operational points reveals that HLHC’s major changes primarily stem from CO 2 suppressing photorespiration. Integration of these fluxes into a simplified model predicts changes in CBC labeling under HLHC. This study extends our prior discovery that incomplete CBC labeling is due to unlabeled carbon reimported during R L , offering insights into manipulating labeling through adjustments in photosynthetic rates.

Elevated CO2↗
DOE OSTI2024

FatPlants: a comprehensive information system for lipid-related genes and metabolic pathways in plants

Abstract FatPlants, an open-access, web-based database, consolidates data, annotations, analysis results, and visualizations of lipid-related genes, proteins, and metabolic pathways in plants. Serving as a minable resource, FatPlants offers a user-friendly interface for facilitating studies into the regulation of plant lipid metabolism and supporting breeding efforts aimed at increasing crop oil content. This web resource, developed using data derived from our own research, curated from public resources, and gleaned from academic literature, comprises information on known fatty-acid-related proteins, genes, and pathways in multiple plants, with an emphasis on Glycine max, Arabidopsis thaliana, and Camelina sativa. Furthermore, the platform includes machine-learning based methods and navigation tools designed to aid in characterizing metabolic pathways and protein interactions. Comprehensive gene and protein information cards, a Basic Local Alignment Search Tool search function, similar structure search capacities from AphaFold, and ChatGPT-based query for protein information are additional features. Database URL: https://www.fatplants.net/

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

An efficient LC-MS method for isomer separation and detection of sugars, phosphorylated sugars, and organic acids

Abstract Assessing central carbon metabolism in plants can be challenging due to the dynamic range in pool sizes, with low levels of important phosphorylated sugars relative to more abundant sugars and organic acids. Here, we report a sensitive liquid chromatography–mass spectrometry method for analysing central metabolites on a hybrid column, where both anion-exchange and hydrophilic interaction chromatography (HILIC) ligands are embedded in the stationary phase. The liquid chromatography method was developed for enhanced selectivity of 27 central metabolites in a single run with sensitivity at femtomole levels observed for most phosphorylated sugars. The method resolved phosphorylated hexose, pentose, and triose isomers that are otherwise challenging. Compared with a standard HILIC approach, these metabolites had improved peak areas using our approach due to ion enhancement or low ion suppression in the biological sample matrix. The approach was applied to investigate metabolism in high lipid-producing tobacco leaves that exhibited increased levels of acetyl-CoA, a precursor for oil biosynthesis. The application of the method to isotopologue detection and quantification was considered through evaluating 13C-labeled seeds from Camelina sativa. The method provides a means to analyse intermediates more comprehensively in central metabolism of plant tissues.

Plant Sciences↗
DOE OSTI2025

Complete replacement of Arabidopsis oil-producing enzymes with heterologous diacylglycerol acyltransferases

Acyl-CoA:diacylglycerol acyltransferase 1 (DGAT1) and phospholipid:diacylglycerol acyltransferase 1 (PDAT1) share responsibility for triacylglycerol (TAG) biosynthesis, and their selectivities control TAG fatty acid (FA) compositions. For rational metabolic engineering of seed oils, replacing endogenous TAG biosynthesis with exogenous enzymes containing different substrate FA selectivities is desirable; however, the dgat1-1/pdat1-2 double mutant is pollen lethal. Here, we evaluated the ability of 3 DGAT1s, from phylogenetically diverse plants with distinct TAG assembly processes, to completely replace endogenous TAG biosynthesis in Arabidopsis ( Arabidopsis thaliana ). We transformed dgat1-1 mutant plants with expression constructs for DGAT1 s from Camelina sativa , Physaria fendleri , and castor ( Ricinus communis ). Transgene expression was properly “contextualized” by using a previously determined minimum necessary expression unit containing the promoter/5′ UTR and first intron of native AtDGAT1 ; both of these DNA elements are essential for pollen expression. Next, we crossed homozygous lines with a DGAT1/DGAT1/PDAT1/pdat1-2 parent. C. sativa and P. fendleri DGAT1s restored the FA compositions and transcriptional differences of dgat1-1 to near wild-type and rescued the dgat1-1/pdat1-2 pollen lethality. R. communis DGAT1 was active in dgat1-1 seeds but produced unique oil profiles and alterations in the expression of lipid metabolic genes; it also failed to rescue dgat1-1/pdat1-2 lethality. This study confirms that the promoter and first intron of AtDGAT1 can modulate the expression of foreign DGAT1 genes to fit the correct spatiotemporal profile necessary for completely replacing endogenous TAG biosynthesis. Furthermore, it demonstrates an additional layer of unexpected enzyme incompatibility between oilseed lineages, which may complicate bioengineering approaches that seek to replace essential genes with orthologs.

McGuire, Sean T. [Washington State Univ., Pullman,↗
DOE OSTI2022

High-throughput detection of T-DNA insertion sites for multiple transgenes in complex genomes

Abstract Background Genetic engineering of crop plants has been successful in transferring traits into elite lines beyond what can be achieved with breeding techniques. Introduction of transgenes originating from other species has conferred resistance to biotic and abiotic stresses, increased efficiency, and modified developmental programs. The next challenge is now to combine multiple transgenes into elite varieties via gene stacking to combine traits. Generating stable homozygous lines with multiple transgenes requires selection of segregating generations which is time consuming and labor intensive, especially if the crop is polyploid. Insertion site effects and transgene copy number are important metrics for commercialization and trait efficiency. Results We have developed a simple method to identify the sites of transgene insertions using T-DNA-specific primers and high-throughput sequencing that enables identification of multiple insertion sites in the T 1 generation of any crop transformed via Agrobacterium . We present an example using the allohexaploid oil-seed plant Camelina sativa to determine insertion site location of two transgenes. Conclusion This new methodology enables the early selection of desirable transgene location and copy number to generate homozygous lines within two generations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

AmeriFlux US-MN2 Morris: Corn-Soybean-Wheat with Cover Crops, Minimal Tillage

This is the AmeriFlux version of the carbon flux data for the site US-MN2 Morris: Corn-Soybean-Wheat with Cover Crops, Minimal Tillage. Site Description - Cropland, 3-year rotation (corn-soybean-wheat), cover crops (winter camelina and pennycress), minimum tillage, nutrient management by soil tests, uniform pest management, tile drainage

Helseth, Christina↗
DOE OSTI2025

AmeriFlux FLUXNET-1F US-MN2 Morris: Corn-Soybean-Wheat with Cover Crops, Minimal Tillage

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-MN2 Morris: Corn-Soybean-Wheat with Cover Crops, Minimal Tillage. This is the FLUXNET version of the carbon flux data for the site US-MN2 Morris: Corn-Soybean-Wheat with Cover Crops, Minimal Tillage produced by applying the standard ONEFlux (1F) software. Site Description - Cropland, 3-year rotation (corn-soybean-wheat), cover crops (winter camelina and pennycress), minimum tillage, nutrient management by soil tests, uniform pest management, tile drainage

Helseth, Christina [USDA-ARS LTAR]↗
NASA NTRS2015

Effects of Burning Alternative Fuel in a 5-Cup Combustor Sector

A goal of NASA's Environmentally Responsible Aviation (ERA) program is to develop a combustor that will reduce the NOx emissions and that can burn both standard and alternative fuels. To meet this goal, NASA partnered with General Electric Aviation to develop a 5-cup combustor sector; this sector was tested in NASA Glenn's Advanced Subsonic Combustion Rig (ASCR). To verify that the combustor sector was fuel-flexible, it was tested with a 50-50 blend of JP-8 and a biofuel made from the camelina sativa plant. Results from this test were compared to results from tests where the fuel was neat JP-8. Testing was done at three combustor inlet conditions: cruise, 30% power, and 7% power. When compared to burning JP-8, burning the 50-50 blend did not significantly affect emissions of NOx, CO, or total hydrocarbons. Furthermore, it did not significantly affect the magnitude and frequency of the dynamic pressure fluctuations.

alternative fuel↗
NASA NTRS2015

Alternative-Fuel Effects on Contrails & Cruise Emissions (ACCESS-2) Flight Experiment

Although the emission performance of gas-turbine engines burning renewable aviation fuels have been thoroughly documented in recent ground-based studies, there is still great uncertainty regarding how the fuels effect aircraft exhaust composition and contrail formation at cruise altitudes. To fill this information gap, the NASA Aeronautics Research Mission Directorate sponsored the ACCESS flight series to make detailed measurements of trace gases, aerosols and ice particles in the near-field behind the NASA DC-8 aircraft as it burned either standard petroleum-based fuel of varying sulfur content or a 50:50 blend of standard fuel and a hydro-treated esters and fatty acid (HEFA) jet fuel produced from camelina plant oil. ACCESS 1, conducted in spring 2013 near Palmdale CA, focused on refining flight plans and sampling techniques and used the instrumented NASA Langley HU-25 aircraft to document DC-8 emissions and contrails on five separate flights of approx.2 hour duration. ACCESS 2, conducted from Palmdale in May 2014, engaged partners from the Deutsches Zentrum fuer Luft- und Raumfahrt (DLR) and National Research Council-Canada to provide additional scientific expertise and sampling aircraft (Falcon 20 and CT-133, respectively) with more extensive trace gas, particle, or air motion measurement capability. Eight, muliti-aircraft research flights of 2 to 4 hour duration were conducted to document the emissions and contrail properties of the DC-8 as it 1) burned low sulfur Jet A, high sulfur Jet A or low sulfur Jet A/HEFA blend, 2) flew at altitudes between 6 and 11 km, and 3) operated its engines at three different fuel flow rates. This presentation further describes the ACCESS flight experiments, examines fuel type and thrust setting impacts on engine emissions, and compares cruise-altitude observations with similar data acquired in ground tests.

Anderson, Bruce E.↗