Search NASA⌕ Search

SEARCH · Search NASA

Results for “canister”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Toxicological Assessment of the International Space Station Atmosphere with Emphasis on Metox Canister Regeneration

Space-faring crews must have safe breathing air throughout their missions to ensure adequate performance and good health. Toxicological assessment of air quality depends on the standards that define acceptable air quality, measurements of pollutant levels during the flight, and reports from the crew on their in-flight perceptions of air quality. Air samples returned from ISS on flights 8A, UF2, 9A, and 11A were analyzed for trace pollutants. On average, the air during this period of operations was safe for human respiration. However, about 3 hours into the regeneration of 2 Metox canisters in the U.S. airlock on 20 February 2002 the crew reported an intolerable odor that caused them to stop the regeneration, take refuge in the Russian segment, and scrub air in the U.S. segment for 30 hours. Analytical data from grab samples taken during the incident showed that the pollutants released were characteristic of nominal air pollutants, but were present in much higher concentrations. The odors reported by the crew were due to relatively high concentrations of n-butanol, and possibly other pollutants in the mixture. Later data taken during regeneration of Metox canisters that had not been subject to long-term flows showed minimal effects on air quality. Long-term trending data suggest that a disruption in atmospheric mixing between the Service Module and the U.S. Laboratory has occurred and that formaldehyde concentrations are gradually increasing in the U.S. Laboratory. Trending data also show that the releases of octafluoropropane (OFP) have subsided.

James, John T.↗

Genesis Solar Wind Science Canister Components Curated as Potential Solar Wind Collectors and Reference Contamination Sources

The Genesis mission collected solar wind for 27 months at Earth-Sun L1 on both passive and active collectors carried inside of a Science Canister, which was cleaned and assembled in an ISO Class 4 cleanroom prior to launch. The primary passive collectors, 271 individual hexagons and 30 half-hexagons of semiconductor materials, are described in. Since the hard landing reduced the 301 passive collectors to many thousand smaller fragments, characterization and posting in the online catalog remains a work in progress, with about 19% of the total area characterized to date. Other passive collectors, surfaces of opportunity, have been added to the online catalog. For species needing to be concentrated for precise measurement (e.g. oxygen and nitrogen isotopes) an energy-independent parabolic ion mirror focused ions onto a 6.2 cm diameter target. The target materials, as recovered after landing, are described in. The online catalog of these solar wind collectors, a work in progress, can be found at: http://curator.jsc.nasa.gov/gencatalog/index.cfm This paper describes the next step, the cataloging of pieces of the Science Canister, which were surfaces exposed to the solar wind or component materials adjacent to solar wind collectors which may have contributed contamination.

Allton, J. H.↗

NASA Alternate Fecal Canister Development, Design, Testing, and Flight Demonstration on ISS

The Alternate Fecal Canister (AFC) is an alternative to the hard-sided Fecal Canister (FC) used by the Universal Waste Management System (UWMS), to contain fecal waste, clean-up consumables, gloves and packaging materials. The AFC is constructed of a flexible, odor-tight material and can be reduced to a significantly smaller volume than the FC for launch and is significantly lighter than the FC. The project tested a wide range of materials for containing fecal waste including many used in various forms by the public, military, and aerospace industry in a variety of applications. Designed to interface with the UWMS with no modifications to the on-orbit hardware, the AFC will be tested on ISS with the UWMS in a technology demonstration (TD). This paper will summarize the feasibility testing of the candidate materials along with final selection criteria, design elements for the final configuration, and final calculations on volume and mass savings. It will provide details gleaned from the TD regarding interface with the UWMS, crew operations, and odor control effectiveness. It will also describe the technology demonstration benefits and how that data informs the Orion-installed UWMS unit and future manifesting of consumables for both Orion and ISS.

life support↗

BRIC-60: Biological Research in Canisters (BRIC)-60

The Biological Research in Canisters (BRIC) is an anodized-aluminum cylinder used to provide passive stowage for investigations evaluating the effects of space flight on small organisms. Specimens flown in the BRIC 60 mm petri dish (BRIC-60) hardware include Lycoperscion esculentum (tomato), Arabidopsis thaliana (thale cress), Glycine max (soybean) seedlings, Physarum polycephalum (slime mold) cells, Pothetria dispar (gypsy moth) eggs and Ceratodon purpureus (moss).

BRIC-60↗

Biological Research in Canisters (BRIC) - Light Emitting Diode (LED)

The Biological Research in Canisters - LED (BRIC-LED) is a biological research system that is being designed to complement the capabilities of the existing BRIC-Petri Dish Fixation Unit (PDFU) for the Space Life and Physical Sciences (SLPS) Program. A diverse range of organisms can be supported, including plant seedlings, callus cultures, Caenorhabditis elegans, microbes, and others. In the event of a launch scrub, the entire assembly can be replaced with an identical back-up unit containing freshly loaded specimens.

Biological↗

Thermal-control canister

Use of variable-conductance heat-pipe link together with fixed-conductance system allows canister temperature to vary over wide range, yet hold stable to + or - 1 degree Centigrade. System has fewer parts and requires considerably less power than conventional heaters and thermostats.

Ollendorf, S.↗

Drawer drive for space shuttle vacuum canister

A sliding drawer type canister was designed to contain long duration exposure facility experiments which require vacuum storage before and after space exposure. The elastomeric seals require high closing loads which are generated through camming levers and transmitted through a spring loaded pressure plate. Lubrication was provided by various dry surface coatings. Higher than expected friction required some redesign after which the assembly functioned well and provided good sealing.

Werner, K. E.↗

Dish Antenna Would Deploy From a Canister

37-tile portable microwave antenna is composed of hexagonal tiles supported by a truss. Skewed connecting struts are hinged at their ends, and rotated during storage and deployment. Proposed microwave antenna would be stored compactly in a canister and deployed onsite.

Finley, L. A.↗

Tethered Satellite System Tip Canister - Thermal design and test

The Tethered Satellite System (TSS) is scheduled for launch, on STS-46 in mid-1992. The major mission objective is to investigate electrodynamic phenomena associated with long electrically conductive tether, in the earth orbital environment. A spherical Satellite (1.6-m diameter), remains connected to the Orbiter throughout TSS-1 mission by a conductive tether. The Satellite operates at up to 20 km above the Orbiter during the TSS mission. The Tip Canister (TPC), that is mounted on the end of a 12-m retractable boom, contains mechanisms that control and monitor tether movement. The TPC is an independent thermal system from the base 'Deployer/Spacelab Pallet'. This paper presents the TPC thermal design verification approach that includes a description of thermal design and thermal balance testing. Flight TPC temperature predictions are also presented.

Chapter, John J.↗

A decade of discovery: Experiments with the Get Away Special (GAS) canister

The experiments from Booker T. Washington's High School for Engineering Profession designed an experiment for a Shuttle flight. The experiments which was flown on STS-42, were contained in three layers of a Get Away Special canister. The first layer housed the Heterogeneous Flow Experiment, to test the commercial application of space exploration; layer two housed an Artemia Salinas Growth Experiment, a test to determine the success and range of food production in microgravity for longer future missions; and layer three, reserved for the computer and monitoring equipment. What was learned from these experiments; and more importantly, what impact they had on education on a broader scale is the subject of this article.

Brienzo, Robert↗

Limited Duration of Candidate Materials Exposure Experiment (LDCE): A Complex Autonomous Payload (CAP) using a Get Away Special (GAS) canister

CMSS has designed, fabricated, qualified and flown the LDCE payload as a cost effective space flight hardware to conduct exposure of materials to the space environment. The hardware has been qualified for 10 missions, utilizing a GAS Canister, supplied by Goddard Space Flight Center. Results of the first series of LDCE experiments have shown that the hardware performed as expected.

Davis, D.↗

Experimental and Computational Investigations of Phase Change Thermal Energy Storage Canisters

Two sets of experimental data are examined in this paper, ground and space experiments, for cylindrical canisters with thermal energy storage applications. A 2-D computational model was developed for unsteady heat transfer (conduction and radiation) with phase-change. The radiation heat transfer employed a finite volume method. The following was found in this study: (1) Ground Experiments: the convection heat transfer is equally important to that of the radiation heat transfer; radiation heat transfer in the liquid is found to be more significant than that in the void; including the radiation heat transfer in the liquid resulted in lower temperatures (about 15 K) and increased the melting time (about 10 min.); generally, most of the heat flow takes place in the radial direction. (2) Space Experiments: radiation heat transfer in the void is found to be more significant than that in the liquid (exactly the opposite to the Ground Experiments); accordingly, the location and size of the void affects the performance considerably; including the radiation heat transfer in the void resulted in lower temperatures (about 40 K).

Ibrahim, Mounir↗