Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon precursor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Lignin-based carbon quantum dots with high fluorescence performance prepared by supercritical catalysis and solvothermal treatment for tumor-targeted labeling

The poor fluorescence performance of lignin-based carbon quantum dots (L-CQDs) prepared using the bottom-up method has hindered their development. Here, in this study, a two-step strategy was proposed to efficiently enhance the fluorescence properties of L-CQDs. Lignin was first cracked using an ethanol supercritical/noble metal catalyst; then, the L-CQDs were prepared with the cracked lignin fragments as carbon precursors without adding any modified reagents. Compared with the OL-CQDs prepared by the traditional one-pot hydrothermal method, the L-CQDs-1 prepared from CL-1 containing much low molecular weight compounds, and have photoluminescence (increased from 63 to 975) and excellent up-conversion photoluminescence (enhanced by 16.3 to 963), which significantly enhanced by about 15 times and 60 times, respectively. They can emit bright blue fluorescence under both ultraviolet and near-infrared light irradiation owing to a large amount of surface defects caused by the rich compound composition. When L-CQDs-1 were combined with, and quenched by folic acid (FA), the prepared FA@L-CQDs-1 show the ability to target and label tumor cells. This study opens new avenues for the preparation of L-CQDs with high fluorescence performance using lignocellulosic material without heteroatom additives.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Achieving Phase Control of Polymorphic Tungsten Carbide Catalysts

The polymorphism of tungsten carbide (W x C) and the challenge of selectively synthesizing pure phases have impeded a precise understanding of catalytic structure−property relationships. This study establishes a framework for phase-selective synthesis of W x C through controlling carburization kinetics. By maintaining particle sizes below 10 nm, β-W 2 C is selectively synthesized using gaseous carbon precursors (CH 4 /H 2 ) via temperature-programmed carburization (TPC). Our findings reveal that W 2 C stabilization is predominantly dictated by particle size and carburization kinetics rather than support interactions, providing a tunable approach to synthesize tungsten carbide catalysts. We elucidate the mechanistic pathway of WO x carburization, demonstrating that CH 4 activation occurs at mild temperatures via lattice oxygen. Our reactor studies establish ex situ synthesized β- W 2 C as an active and stable catalyst for the reverse water-gas shift (RWGS) reaction. However, the need for passivation and reduction pretreatment leads to a complex surface structure with diminished intrinsic activity. In contrast, our in situ synthesis protocol for β-W 2 C eliminates the need for passivation and exhibits increased CO STY during RWGS, illustrating the intrinsically higher activity compared to metallic W, WC 1−x (0.5 < x < 1), and stoichiometric WC.

CO2 conversion↗
DOE OSTI2022

Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures

Carbon scaffolds have been shown to improve the performance of Li metal anodes in Li-ion batteries by acting as conductive hosts for Li metal plating and stripping. The scaffolds provide a more uniform electric field, and their 3D geometry enables smaller diffusion paths for the Li ions. In this project, several different types of carbon lattices were 3D printed, mechanically tested, and analyzed in coin cells. Planar and 3D printed graphite coatings were evaluated as the baseline, since graphite is a common anode material. The results showed that implementing a 3D graphite lattice into a coin cell improved the Li plating and stripping efficiency compared to the planar coating. However, since graphite can intercalate Li ions, other carbon materials were also explored that should act as better hosts for Li plating/stripping. To improve the compressibility of these non-graphite carbon scaffolds, five different carbon ink formulations were 3D printed in lattice configurations. SEM imaging and compression testing showed that both the final dimensions and the compressibility of the carbon lattices depended on the type of carbon precursors used. The two most suitable compositions were found to be those made with graphene oxide-resorcinol formaldehyde and graphene oxide-ammonium hydroxide. In the future, these formulations will be further refined to increase their mechanical strength, and their performance as scaffold hosts for Li metal anodes will be evaluated in coin cells.

25 ENERGY STORAGE↗
DOE OSTI2024

Structural insights into binding of polyglutamylated tetrahydrofolate by serine hydroxymethyltransferase 8 from soybean

Tetrahydrofolate and its derivatives participate in one-carbon transfer reactions in all organisms. The cellular form of tetrahydrofolate (THF) is modified by multiple glutamate residues and polyglutamylation plays a key role in organellar and cellular folate homeostasis. In addition, polyglutamylation of THF is known to increase the binding affinity to enzymes in the folate cycle, many of which can utilize polyglutamylated THF as a substrate. Here, we use X-ray crystallography to provide a high-resolution view of interactions between the enzyme serine hydroxymethyltransferase (SHMT), which provides one carbon precursors for the folate cycle, and a polyglutamylated form of THF. Our 1.7 Å crystal structure of soybean SHMT8 in complex with diglutamylated 5-formyl-THF reveals, for the first time, a structural rearrangement of a loop at the entrance to the folate binding site accompanied by the formation of novel specific interactions between the enzyme and the diglutamyl tail of the ligand. Biochemical assays show that additional glutamate moieties on the folate ligand increase both enzyme stability and binding affinity. Together these studies provide new information on SHMT structure and function and inform the design of anti-folate agents.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Method for making metal-carbon composites and compositions

A method for making covetic metal-carbon composites or compositions by electron beam melt heating under vacuum (pressure <10−3 Torr) is described herein. This fabrication method is advantageous, in that it provides oxygen-free covetic materials in a process that allows precise control of the composition of the covetic material to be produced. The method described herein also can be applied to produce multi-element-carbon composites within a metal or alloy matrix, including high melting temperature materials such as ceramic particles or prefabricated nano- or micro-structures, such as carbon nanotubes or graphene compounds. The covetic reaction between metal and carbon takes place under the influence of flowing electrons through the melted metal-carbon precursor. This process creates strong bonding between nanocarbon structure and the metal elements in the melt.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Accurate additive manufacturing of lightweight and elastic carbons using plastic precursors

Despite groundbreaking advances in the additive manufacturing of polymers, metals, and ceramics, scaled and accurate production of structured carbons remains largely underdeveloped. This work reports a simple method to produce complex carbon materials with very low dimensional shrinkage from printed to carbonized state (less than 4%), using commercially available polypropylene precursors and a fused filament fabrication-based process. The control of macrostructural retention is enabled by the inclusion of fiber fillers regardless of the crosslinking degree of the polypropylene matrix, providing a significant advantage to directly control the density, porosity, and mechanical properties of 3D printed carbons. Using the same printed plastic precursors, different mechanical responses of derived carbons can be obtained, notably from stiff to highly compressible. This report harnesses the power of additive manufacturing for producing carbons with accurately controlled structure and properties, while enabling great opportunities for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of Alkyne Precursor Structure on Carbon Nanotube Chiral Distribution: Data-Dense Analysis Across Multiple Catalyst Types

Carbon nanotubes (CNTs) are a desirable material in the field of optoelectronics and semiconductors due to electronic properties (e.g., bandgap) that are dependent upon their chirality, defined by their diameter and lattice angle. Unfortunately, industrial-scale syntheses have yet to realize growth of a single desired chirality and instead rely on postsynthetic separation techniques to refine a chiral mixture, which increases process complexity and cost. Here, we studied the influence of precursor structure on chiral distribution, using a series of terminal alkyne precursors (acetylene, methylacetylene, vinylacetylene, 1-butyne, two enantiomers of 3-butyn-2-ol and a racemic mixture thereof) to grow CNTs across five transition-metal catalysts (Fe, FeMo, and three proportions of CoMo). Multiwavelength Raman spectroscopy on 5,145 spots (5 catalysts, 7 precursors, 3 lasers, and 49 distinct substrate locations on each) determined that acetylene grew the smallest diameter CNTs, while vinylacetylene produced fewer subnanometer CNTs. Though precursor structure did not dictate a uniform chiral shift, it was shown to broaden or narrow chiral distribution, while catalyst structure played a dominant role. In conclusion, this is consistent with metal-precursor binding occurring through unsaturated bonds in the hydrocarbons via the alkyne polymerization mechanism.

Carbon nanotubes↗
DOE OSTI2021

Development of a Lower Cost, High Volume, Commercially Available, Precursor for Lower Cost Carbon Fiber for Automotive and Wind Blade Applications

Essentially all carbon fibers used in structural applications are presently manufactured from solution spun polyacrylonitrile (PAN) precursor. Solution spinning is accomplished at relatively low temperatures using very large amounts of environmentally unfriendly solvents that impart major impact to line speed and costs involved with handling and reclaiming the solvents and associated “waste streams” required in spinning and extracting those solvents. Dralon and others have demonstrated the dry spinning of PAN in the production of some acrylic fibers for textile applications, but to this point it has not been demonstrated in the production of carbon fibers. In dry spinning, the PAN polymer is also dissolved into similar solvents, although typically less solvent is utilized to maintain a somewhat higher solids content of 20-50%. The use of lower overall solvent quantities and elimination of the need for solvent/water separation simplifies and reduces the cost of solvent recovery operations. Other portions of the precursor production and carbon fiber manufacturing processes are quite similar. The work described in this report demonstrated that dry spun acrylic fiber can be an attractive candidate for carbon fiber precursor of potential interest to applications looking to capture the specific stiffness (stiffness per unit mass) and specific strength (strength per unit mass) of carbon fiber when produced at a discount relative to commercial carbon fibers in the market today. Dralon has determined that the dry spinning process utilized for producing fibers used as precursors in this project requires 27% less energy versus producing comparable fibers via the industry standard wet spinning process. Identification of carbon fiber manufacturers, as well as applications development and targeted marketing, will be required to achieve significant in-roads into mission areas of interest to DOE, such as automotive applications and wind turbine blades. In support of that activity, initial data produced in this project indicate the innovative approach as described in this report can meet at least the baseline property requirements identified for these applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unveiling the microstructural evolution of carbon fibers derived from polyamide-6

Polyacrylonitrile-based carbon fibers have dominated the industry for decades, but the high cost of polyacrylonitrile has prevented the widespread adoption of carbon fiber in high-volume structural applications. As such, a significant amount of research has been dedicated to finding an alternative, low-cost carbon fiber precursor. In this work, carbon fibers were produced from polyamide-6 using metal salt impregnation and a thermo-oxidative stabilization step. To gain further insight into the carbonization process and microstructural transformation, the morphologies, crystallinities, elemental compositions, and thermal stabilities of the fibers were characterized at various stages of processing. The stabilization step resulted in a significant increase in carbon yield, indicating a dramatic increase in thermal stability. This is due to the crosslinking of polyamide-6 chains, which was confirmed by functional group analysis. The crystallinity of the fibers was also significantly altered during processing, as the produced carbon fibers consisted of pseudo-amorphous carbon with two distinct regions of metal salt impregnation. Finally, the findings and microstructural evolution mechanisms provide guidelines for further research into carbon fiber produced from polyamide-6.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhancing the activity of Fe-N-C oxygen reduction reaction electrocatalysts by high-throughput exploration of synthesis parameters

Here, the most active class of platinum group metal-free (PGM-free) oxygen reduction reaction (ORR) electrocatalysts in acidic electrolytes are those synthesized by heat treatment of iron, carbon, nitrogen precursors (Fe-N-C). Due to the large number of possible precursor compounds, a small fraction of the synthesis variable space has been explored. Correlation of synthesis variables with Fe speciation and ORR activity has been limited. In this work, an automation platform and a multi-port ball-milling were utilized to evaluate the effects of synthesis variables, such as identity of iron precursor, iron loading, and carbon and nitrogen sources on the ORR activity of iron -nitrogen-carbon catalysts in acidic electrolyte. The ORR activity is correlated with catalyst Fe speciation determined using Fe K-edge X-ray absorption spectroscopy (XAFS).

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Consortium for Production of Affordable Carbon Fibers in the United States (Final Report)

Various feedstocks from coal, petroleum and bio-based acrylonitrile were investigated for their ability to produce carbon fiber within DOE strength (250 ksi), modulus (25 Msi), elongation (>1%) and cost (≤$5/lb) goals for wider utilization in light-weight vehicles for the automotive industry. The overarching approach was to chemically identify and map the various feedstocks, understand the molecular transformation to produce carbon fiber precursors (mesophase for pitch materials of polyacrylonitrile polymer) and how these impact carbon fiber quality. Predictive models were built to relate the feedstocks and precursors to carbon fiber properties using atomistic and micro-scale modeling within ±15%. Using tow-level carbon fiber epoxy composites, carbon fibers tow-level predictions of elastic components of the carbon fibers were also successfully modeled within ±15%, using finite element analysis to confirm single filament carbon fiber properties. These models were validated with tow-level epoxy composite experiments from carbon fibers produced in this study.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Melt-Spun PAN Precursor for Cost-Effective Carbon Fibers in High Pressure Compressed Gas Tankage

The objective of this program was to synthesize melt-spinnable polyacrylonitrile (PAN) precursor that will lead to carbon fiber 25% less expensive than carbon fiber produced from conventional PAN precursor when produced in large volumes. The carbon fiber produced from this precursor needs to achieve ≥ 700 ksi tensile strength with this cost reduction to replace the incumbent fiber. In this program, the technology for producing precursor and then converted carbon fiber (CF) capable of meeting the 700 ksi target was to be demonstrated at a small scale in tows, containing ≥ 100 filaments. If this program moved on to a “Phase 2”, the processes would be scaled up to produce and test Type IV compressed gas storage tanks capable of meeting the 700-bar ultimate targeted FOA performance level. Precursor fiber production typically contributes a large fraction (~50%) to finished CF manufactured cost. Presently, all high strength CFs are manufactured from solution spun PAN precursor, accomplished at low temperatures using large amounts of environmentally unfriendly solvents that impart major impact to line speed and costs involved with handling and reclaiming the solvents and associated “waste streams” required in spinning and extracting those solvents. PAN melt spinning was demonstrated by the company BASF in CF precursor production and used in production of some other acrylic fibers, but significant production challenges remain for meeting the established CF metrics. Melt spinning requires use of plasticizers to suppress the melt temperature of the predominantly PAN formulation to a point sufficiently below the temperature of significant cross-linking. Fortunately, BASF and this team’s earlier work had demonstrated acrylic formulations melt spun with combinations of plasticizing solvents at much lower solvent levels. This project team made significant progress in understanding technical issues and identifying formulation pathways in earlier work in this area where >250ksi strength was achieved. The goal of this program was to pursue a more comprehensive approach with a larger, more diverse team having greater equipment design and overall production capabilities to push rapidly beyond the science to resolve remaining “engineering” issues associated with establishing stable, continuous processes for precursor fiber leading to enhanced, cost-effective CF and composite tank production.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Scale up production of carbon fibers from petroleum mesophase pitch

This work investigates the scale-up of pitch precursors for the carbon fiber market using mesophase pitch formulated and produced by Advanced Carbon Products Technologies’ (ACPT’s) patented mesophase pitch processing technology. Through use of its patented process, ACPT developed strategic materials by converting petroleum-based pitch into a high-value, low-cost, carbon-rich feedstock for carbon fiber and other materials critical to our national security. The team successfully developed processing criteria for the tailored mesophase pitch material that can be processed further into precursor and carbon fiber. Processability of the mesophase pitch into precursor and carbon fiber was demonstrated at scale. The resulting materials sequester the carbon that would otherwise be burned and released into the atmosphere, making this an environmentally friendly way to produce these materials in the United States.Pitch-based carbon fibers offer a promising pathway toward cost-effective, high-performance materials for structural and high-modulus composite applications; however, adoption has been limited by challenges in precursor processability and scale-up. In this work, tailored isotropic and mesophase petroleum-derived pitch materials were developed and evaluated for precursor and carbon fiber production through a collaborative effort between Oak Ridge National Laboratory (ORNL) and ACPT. Processing conditions were established at ORNL’s Carbon Fiber Technology Facility to enable stable melt-blowing of pitch-based precursors under continuous operation. Mesophase pitch precursor fibers were produced following oxidation and carbonization, corresponding to a diameter shrinkage of approximately 12%–13% and an estimated mass yield of about 75%–80%. Continuous melt-blowing steady-state operation was demonstrated over time, indicating robust process stability. Melt-blowing was achieved at throughput rates of approximately 20 lb/h⁻¹, validating the commercial viability of petroleum-derived pitch feedstocks for fiber production. Further studies are required to tailor carbon fiber microstructure and properties for specific composite applications.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Ultrathin quasi-2D amorphous carbon dielectric prepared from solution precursor for nanoelectronics

Abstract Materials keeping thickness in atomic scale but extending primarily in lateral dimensions offer properties attractive for many emerging applications. However, compared to crystalline counterparts, synthesis of atomically thin films in the highly disordered amorphous form, which avoids nonuniformity and defects associated with grain boundaries, is challenging due to their metastable nature. Here we present a scalable and solution-based strategy to prepare large-area, freestanding quasi-2D amorphous carbon nanomembranes with predominant sp 2 bonding and thickness down to 1–2 atomic layers, from coal-derived carbon dots as precursors. These atomically thin amorphous carbon films are mechanically strong with modulus of 400 ± 100 GPa and demonstrate robust dielectric properties with high dielectric strength above 20 MV cm −1 and low leakage current density below 10 −4 A cm −2 through a scaled thickness of three-atomic layers. They can be implemented as solution-deposited ultrathin gate dielectrics in transistors or ion-transport media in memristors, enabling exceptional device performance and spatiotemporal uniformity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Carbon fibers derived from commodity polymers: A review

Carbon fiber composites are prohibitively expensive for a wide array of applications that would greatly benefit from their superior specific strength and specific stiffness. Replacing the market-dominant carbon fiber precursor material, polyacrylonitrile, with a low-cost alternative would significantly reduce the cost of carbon fiber production. Commodity polymers may provide such an alternative thanks to their abundance and ease of production into fibers. Furthermore, this review presents state-of-the-art carbon fiber production from polyacrylonitrile, an overview of melt-spinnable alternative precursors broadly, and an in-depth review of the latest advances in the synthesis of carbon fibers from low-cost, commodity thermoplastics such as polyethylene, polyamide, polystyrene, polyester, and poly(vinyl chloride).

36 MATERIALS SCIENCE↗