SEARCH · Search NASA

Results for “carrier generation & recombination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Comparison of time-resolved photoluminescence and deep-level transient spectroscopy defect evaluations in an InAs nBn detector subjected to in situ and ex situ 63 MeV proton irradiation

Deep-level transient spectroscopy and temperature-dependent time-resolved photoluminescence experiments are performed on identical InAs nBn photodetector structures as a function of in situ and ex situ 63 MeV proton irradiation to assess their generation and recombination dynamics. Pre-irradiation, the n-type InAs absorbing region, exhibits a steadily increasing minority carrier lifetime with increasing temperature, providing evidence that excited minority carriers may be recombining via shallow defect levels. From deep-level transient spectroscopy, two features are found between 10 and 275 K: a low temperature broad “shoulder,” which suggests emission from multiple shallow electron defect levels with energies <29 meV and a high temperature minimum occurring at ∼230 K with an activation energy of 539 meV, which suggests a defect in the barrier layer in the device. Two similar nBn detectors are then subjected to 63 MeV proton irradiation in step doses and measured between steps. One experiment is performed in situ with an nBn held at ∼10 K during dosing, and the other experiment is performed ex situ with a similar nBn held at room temperature for dosing. The ex situ dosing results in an evaluation of the defect introduction rate that is three to four times lower than in situ due to partial annealing of the proton-induced displacement damage at room temperature. The results of these two experiments are then compared with the dose-dependent recombination rate analysis, resulting in an estimated recombination defect cross section of 1.6 × 10 −13 cm 2 for the shallow shoulder defect.

Carrasco, Rigo A. [Air Force Research Laboratory (↗

DOE OSTI2020

Enhancement of Photoemission on p-Type GaAs Using Surface Acoustic Waves

We demonstrate that photoemission properties of p-type GaAs can be altered by surface acoustic waves (SAWs) generated on the GaAs surface due to dynamical piezoelectric fields of SAWs. Multiphysics simulations indicate that charge-carrier recombination is greatly reduced, and electron effective lifetime in p-doped GaAs may increase by a factor of 10× to 20×. It implies a significant increase, by a factor of 2× to 3×, of quantum efficiency (QE) for GaAs photoemission applications, like GaAs photocathodes. Conditions of different SAW wavelengths, swept SAW intensities, and varied incident photon energies were investigated. Essential steps in SAW device fabrication on a GaAs substrate are demonstrated, including deposition of an additional layer of ZnO for piezoelectric effect enhancement, measurements of current–voltage (I–V) characteristics of the SAW device, and ability to survive high-temperature annealing. Results obtained and reported in this study provide the potential and basis for future studies on building SAW-enhanced photocathodes, as well as other GaAs photoelectric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Compromising Charge Generation and Recombination with Asymmetric Molecule for High-Performance Binary Organic Photovoltaics with Over 18% Certified Efficiency

Balancing the charge generation and recombination constitutes a major challenge to break the current limit of organic photovoltaics (OPVs). Here, to address this issue, an asymmetric non-fullerene acceptor, namely the AC9, is developed and high-performance OPV with a champion efficiency of 18.43% (18.1% certified) is demonstrated. This represents the record value among binary OPVs. Comprehensive analysis on exciton dissociation, charge collection, carrier transport, and recombination has been carried out, unveiling that the improved device performance of asymmetric AC9-based OPVs is originated from a better compromise between charge generation and non-radiative charge recombination, compared with the corresponding symmetric ones. This work provides a high-performing molecule and paves the way for high-performance OPVs through asymmetric molecular design.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Evidence for trap-assisted Auger recombination in MBE grown InGaN quantum wells by electron emission spectroscopy

We report on the direct measurement of hot electrons generated in the active region of blue light-emitting diodes grown by ammonia molecular beam epitaxy by electron emission spectroscopy. The external quantum efficiency of these devices is <1% and does not droop; thus, the efficiency losses from the intrinsic, interband, electron-electron-hole, or electron-hole-hole Auger should not be a significant source of hot carriers. Here, the detection of hot electrons in this case suggests that an alternate hot electron generating process is occurring within these devices, likely a trap-assisted Auger recombination process.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Measuring the Electronic Bandgap of Carbon Nanotube Networks in Non-Ideal p-n Diodes

The measurement of the electronic bandgap and exciton binding energy in quasi-one-dimensional materials such as carbon nanotubes is challenging due to many-body effects and strong electron–electron interactions. Unlike bulk semiconductors, where the electronic bandgap is well known, the optical resonance in low-dimensional semiconductors is dominated by excitons, making their electronic bandgap more difficult to measure. In this work, we measure the electronic bandgap of networks of polymer-wrapped semiconducting single-walled carbon nanotubes (s-SWCNTs) using non-ideal p-n diodes. We show that our s-SWCNT networks have a short minority carrier lifetime due to the presence of interface trap states, making the diodes non-ideal. We use the generation and recombination leakage currents from these non-ideal diodes to measure the electronic bandgap and excitonic levels of different polymer-wrapped s-SWCNTs with varying diameters: arc discharge (~1.55 nm), (7,5) (0.83 nm), and (6,5) (0.76 nm). Our values are consistent with theoretical predictions, providing insight into the fundamental properties of networks of s-SWCNTs. The techniques outlined here demonstrate a robust strategy that can be applied to measuring the electronic bandgaps and exciton binding energies of a broad variety of nanoscale and quantum-confined semiconductors, including the most modern nanoscale transistors that rely on nanowire geometries.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Attosecond Transient Grating Spectroscopy with Near-Infrared Grating Pulses and an Extreme Ultraviolet Diffracted Probe

Transient grating spectroscopy has become a mainstay among metal and semiconductor characterization techniques. Here, we extend the technique toward the shortest achievable time scales by using tabletop high-harmonic generation of attosecond extreme ultraviolet (XUV) pulses that diffract from transient gratings generated with sub-5 fs near-infrared (NIR) pulses. We demonstrate the power of attosecond transient grating spectroscopy (ATGS) by investigating the ultrafast photoexcited dynamics in an Sb semimetal thin film. ATGS provides an element-specific, background-free signal unfettered by spectral congestion, in contrast to transient absorption spectroscopy. With ATGS measurements in Sb polycrystalline thin films, we observe the generation of coherent phonons and investigate the lattice and carrier dynamics. Among the latter processes, we extract carrier thermalization, hot carrier cooling, and electron-hole recombination, which are on the order of 20 fs, 50 fs, and 2 ps time scales, respectively. Furthermore, the simultaneous collection of transient absorption and transient grating data allows us to extract the total complex dielectric constant in the sample dynamics with a single measurement, including the real-valued refractive index, from which we are also able to investigate carrier-phonon interactions and longer-lived phonon dynamics. The outlined experimental technique expands the capabilities of transient grating spectroscopy and attosecond spectroscopies by providing a wealth of information concerning carrier and lattice dynamics with an element-selective technique at the shortest achievable time scales.

Quintero-Bermudez, Rafael↗

DOE OSTI2025

Trap-assisted Auger-Meitner recombination in GaN p-i-n diodes

Most properties of semiconductor devices are dominated by shallow impurities. However, deep defects often play an important role, for instance, in recombination processes or high field transport. While a variety of techniques are available to assess the density and energy levels of impurities, other properties, such as the recombination mechanisms of the defects, escape observation. We report on the direct measurement of hot electrons generated by trap-assisted Auger-Meitner recombination (TAAR) in GaN p-i-n diodes. By performing electron emission spectroscopy (EES) on diodes with surfaces activated to negative electron affinity by cesium, we observe the expected overflow electrons of p-i-n diodes under low current injection. However, when operating the devices at higher current densities, as low as ∼25 A/c⁢m 2 , we measure the emission of high-energy electrons. At variance with the observed hot electrons in light-emitting diodes (LEDs) using EES, the hot electrons generated in p-i-n diodes at our tested currents cannot be from eeh Auger-Meitner recombination due to the diodes' significantly lower carrier densities compared to those in LEDs. During our measurements, we observe the emission of accumulated electrons with energies ∼0.42 eV, ∼0.99 eV, ∼1.43 eV, and ∼2.32 eV above the conduction-band minimum (CBM) at various bias conditions, suggesting the existence of conduction-band features in GaN at these energies where electrons can be long-lived, such as satellite-valley minima and inflection points. We also measure incompletely relaxed hot electrons approaching energies 1.97 ± 0.13 eV and 2.94 ± 0.13 eV above the CBM, as the diodes are biased to high currents, suggesting at least some of the TAAR partaking defects have an energy level ≳1.97 eV and ≳2.94 eV away from either the conduction or valence band edges. Additionally, at our highest operating currents, we measure hot electrons with energies 3.28 ± 0.13 eV above the CBM, providing direct evidence of TAAR processes involving shallow impurities. This unexpected observation of TAAR in GaN p-i-n diodes spotlights the importance of further studies of defects in GaN and the necessity to incorporate the multi-phonon emission, radiative, and TAAR capture steps of defect-assisted recombination cycles into device modeling. Furthermore, this experiment demonstrates the applicability of the simplest semiconductor structures, p-i-n diodes, as a test bed to study the rich recombination physics of semiconductor materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by an Organoboron Additive

Efficient exciton diffusion and charge transport play a vital role in advancing the power conversion efficiency (PCE) of organic solar cells (OSCs). Here, a facile strategy is presented to simultaneously enhance exciton/charge transport of the widely studied PM6:Y6-based OSCs by employing highly emissive trans-bis(dimesitylboron)stilbene (BBS) as a solid additive. BBS transforms the emissive sites from a more H-type aggregate into a more J-type aggregate, which benefits the resonance energy transfer for PM6 exciton diffusion and energy transfer from PM6 to Y6. Transient gated photoluminescence spectroscopy measurements indicate that addition of BBS improves the exciton diffusion coefficient of PM6 and the dissociation of PM6 excitons in the PM6:Y6:BBS film. Transient absorption spectroscopy measurements confirm faster charge generation in PM6:Y6:BBS. Moreover, BBS helps improve Y6 crystallization, and current-sensing atomic force microscopy characterization reveals an improved charge-carrier diffusion length in PM6:Y6:BBS. Finally, owing to the enhanced exciton diffusion, exciton dissociation, charge generation, and charge transport, as well as reduced charge recombination and energy loss, a higher PCE of 17.6% with simultaneously improved open-circuit voltage, short-circuit current density, and fill factor is achieved for the PM6:Y6:BBS devices compared to the devices without BBS (16.2%).

14 SOLAR ENERGY↗

DOE OSTI2021

Solar cell contacts: quantifying the impact of interfacial layers on selectivity, recombination, charge transfer, and V oc

Interfacial layers (IFLs) are ubiquitous in solar cells, but their precise impact on carrier transfer rates and the relation of these rates to performance metrics and the concepts of selectivity and recombination is lacking. We report the use of a well-defined interdigitated back-contact (IBC) silicon solar cell to determine the precise role of such IFLs. We characterize the action of the common IFL spiro-OMeTAD by making it a third contact to the IBC cell. This architecture creates three solar cells within a single structure that, with numerical simulation, provide the exchange current densities (i.e., charge transfer rates) for electrons ( J 0n ) and holes ( J 0p ) and the quasi Fermi-level splitting in the absorber, which measures the balance of generation and recombination. Further, we describe the relation of V oc to contact recombination, the asymmetry in electron/hole collection rates at a single contact (contact selectivity), and the asymmetry in collection rates of the same carrier at separate contacts (carrier selectivity). Relative to bare gold, neat spiro-OMeTAD reduces J 0n and J 0p (their geometric mean ( J 0n J 0p ) 0.5 decreases by 10 4 ), decreasing contact recombination. Addition of the common dopant Li-TFSI and air increase J 0p / J 0n by 10 6 with little effect on ( J 0n J 0p ) 0.5 , increasing contact hole selectivity. The significant increase in V oc observed by introducing spiro-OMeTAD/Li-TFSI IFLs into the cells studied, however, is due to an increase in the carrier selectivity rather than the contact selectivity or recombination of the spiro-OMeTAD-modified contact. Operando measurements further show voltage-dependent changes in the J 0 s, demonstrating that spiro-OMeTAD contributes to hysteresis. Broader context : Solar cells operate by photogenerating excess charge carriers in an absorber material and, in competition with recombination, asymmetrically extracting them at so-called carrier-selective contacts, one that ideally collects only electrons and the other, only holes. Particularly in emerging photovoltaics such as perovskites, thin layers of organic semiconductors or related materials are introduced between the absorber and contact to improve power conversion efficiency. In terms of interfacial charge transfer, a prevailing view is that such interfacial layers improve performance by helping block the collection of the undesired carrier, considered a form of recombination. We use a novel platform to study the simultaneous impact of spiro-OMeTAD, a common interfacial layer, on the collection of electrons, the collection of holes, and on the recombination of electrons and holes. We quantitatively demonstrate that spiro-OMeTAD layers indeed passivate the contact toward recombination, but that larger improvements in the open-circuit voltage, a key cell metric, can come not only from this but also from increasing the asymmetry of the collection of electrons in the system. Further, operando measurements show transient changes in the properties of spiro-OMeTAD which suggest that it contributes to hysteresis phenomena commonly observed in perovskite and other solar cells.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Plasmonics-enhanced photoconductive terahertz detector pumped by Ytterbium-doped fiber laser

We present a photoconductive terahertz detector operating at the 1 µm wavelength range at which high-power and compact Ytterbium-doped femtosecond fiber lasers are available. The detector utilizes an array of plasmonic nanoantennas to provide sub-picosecond transit time for the majority of photo-generated carriers to enable high-sensitivity terahertz detection without using a short-carrier-lifetime substrate. By using a high-mobility semiconductor substrate and preventing photocarrier recombination, the presented detector offers significantly higher sensitivity levels compared with previously demonstrated broadband photoconductive terahertz detectors operating at the 1 µm wavelength range. We demonstrate pulsed terahertz detection over a 4 THz bandwidth with a record-high signal-to-noise ratio of 95 dB at an average terahertz radiation power of 6.8 µW, when using an optical pump power of 30 mW.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Thermally Activated Circularly Polarized Photoluminescence in a 2D Hybrid Perovskite with Giant Spin Splitting

Circularly polarized light generation and detection are critical for future spin-based technologies that inter-convert circularly polarized photons and electron spins. However, detailed mechanisms in such spin-photon interfaces are often either poorly understood or operate at cryogenic temperatures since typically small energies separating spin-split electronic bands facilitate thermally driven spin depolarization. Recently, several 2D hybrid perovskites with polar achiral cations were theoretically demonstrated to exhibit conduction and valence band spin-splitting energies greatly exceeding room-temperature thermal energy, suggesting their utility as spin-photon interfaces with practical operating temperatures. Here, a strong "spin memory" effect is reported in such a polar achiral layered perovskite that enables large room-temperature circularly polarized emission anisotropy following excitation with circularly polarized light. The polarization anisotropy depends strongly on temperature (thermally activated), excitation energy, and crystal orientation with respect to the excitation source. Temperature-dependent photoconductance measurements reveal similar thermally activated carrier generation. These observations suggest a mechanism whereby giant in-plane splitting of single-particle levels protects spin-polarization of photogenerated electrons and holes before recombination. Although polarized light emission is explored in greater detail in chiral perovskites, these results reveal that even without chirality, large spin memory in polar achiral perovskites can enable spin-photon interfaces that operate at elevated temperatures.

14 SOLAR ENERGY↗

DOE OSTI2020

Photoinduced Charge Carrier Dynamics and Electron Injection Efficiencies in Au Nanoparticle-Sensitized TiO 2 Determined with Picosecond Time-Resolved X-ray Photoelectron Spectroscopy

Progress in the development of plasmon-enabled light-harvesting technologies requires a better understanding of their fundamental operating principles and current limitations. In this work, we employ picosecond time-resolved X-ray photoemission spectroscopy to investigate photoinduced electron transfer in a plasmonic model system composed of 20 nm sized gold nanoparticles (NPs) attached to a nanoporous film of TiO 2 . The measurement provides direct, quantitative access to transient local charge distributions from the perspectives of the electron donor (AuNP) and the electron acceptor (TiO 2 ). On average, approximately two electrons are injected per NP, corresponding to an electron injection yield per absorbed photon of 0.1%. Back electron transfer from the perspective of the electron donor is dominated by a fast recombination channel proceeding on a time scale of 60 ± 10 ps and a minor contribution that is completed after ~1 ns. The findings provide a detailed picture of photoinduced charge carrier generation in this NP–semiconductor junction, with important implications for understanding achievable overall photon-to-charge conversion efficiencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Design Rules of the Mixing Phase and Impacts on Device Performance in High-Efficiency Organic Photovoltaics

In nonfullerene acceptor- (NFA-) based solar cells, the exciton splitting takes place at both domain interface and donor/acceptor mixture, which brings in the state of mixing phase into focus. The energetics and morphology are key parameters dictating the charge generation, diffusion, and recombination. It is revealed that tailoringthe electronic properties of the mixing region by doping with larger-bandgap components could reduce the density of state but elevate the filling state level, leading to improved open-circuit voltage ( V OC ) and reduced recombination. The monomolecular and bimolecular recombinations are shown to be intercorrelated, which show a Gaussian-like relationship with V OC and linear relationship with short-circuit current density ( J SC ) and fill factor (FF). The kinetics of hole transfer and exciton diffusion scale with J SC similarly, indicating the carrier generation in mixing region and crystalline domain are equally important. From the morphology perspective, the crystalline order could contribute to V OC improvement, and the fibrillar structure strongly affects the FF. These observations highlight the importance of the mixing region and its connection with crystalline domains and point out the design rules to optimize the mixing phase structure, which is an effective approach to further improve device performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Nanoscale Confinement of Photo-Injected Electrons at Hybrid Interfaces

A prerequisite for advancing hybrid solar light harvesting systems is a comprehensive understanding of the spatiotemporal dynamics of photoinduced interfacial charge separation. Here, we demonstrate access to this transient charge redistribution for a model hybrid system of nanoporous zinc oxide (ZnO) and ruthenium bipyridyl chromophores. The site-selective probing of the molecular electron donor and semiconductor acceptor by time-resolved X-ray photoemission provides direct insight into the depth distribution of the photoinjected electrons and their interaction with the local band structure on a nanometer length scale. Our results show that these electrons remain localized within less than 6 nm from the interface, due to enhanced downward band bending by the photoinjected charge carriers. This spatial confinement suggests that light-induced charge generation and transport in nanoscale ZnO photocatalytic devices proceeds predominantly within the defect-rich surface region, which may lead to enhanced surface recombination and explain their lower performance compared to titanium dioxide (TiO 2 )-based systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Enhanced Surface Passivation by Atomic Layer Deposited Al 2 O 3 for Ultraviolet Sensitive Silicon Photomultipliers

Here, we describe a superior passivation of p-type (p + ) Si surface by Al 2 O 3 thin film that is synthesized by plasma-assisted atomic layer deposition for ultraviolet sensitive silicon photomultipliers (SiPM), compared to conventional SiO 2 and SiN x passivation schemes. The superiority of Al 2 O 3 passivation is due to not only a sufficiently low interface defect density but also a high density of built-in negative charges. A 7 nm thin Al 2 O 3 film can yield an emitter saturation current density of ~8 fA/cm 2 on high sheet resistance p + layer, compared to ~60 and ~1480 fA/cm 2 for thermal SiO 2 and SiN x passivation. This superior surface passivation allows the photon-generated carriers to have higher probabilities to reach the high-field region to trigger an avalanche event. In addition, Al 2 O 3 thin film provides very low values of effective surface recombination velocity on low resistivity n-type and p-type Si surfaces, which can lead to well-passivated surface features on guard ring and trench isolation regions of SiPM. These demonstrate the potential of Al 2 O 3 thin film passivation to improve quantum efficiency and thus photo-detection efficiency of ultraviolet sensitive SiPM with p + /n - /n/n + structure.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Solar enhanced oxygen evolution reaction with transition metal telluride

The photo-enhanced electrocatalytic method of oxygen evolution reaction (OER) shows promise for enhancing the effectiveness of clear energy generation through water splitting by using renewable and sustainable source of energy. However, despite benefits of photoelectrocatalytic (PEC) water splitting, its uses are constrained by its low efficiency as a result of charge carrier recombination, a large overpotential, and sluggish reaction kinetics. Here, we illustrate that Nickel telluride (NiTe) synthesized by hydrothermal methods can function as an extremely effective photo-coupled electrochemical oxygen evolution reaction (POER) catalyst. In this study, NiTe was synthesized by hydrothermal method at 145°C within just an hour of reaction time. In dark conditions, the NiTe deposited on carbon cloth substrate shows a small oxygen evolution reaction overpotential (261 mV) at a current density of 10 mA cm –2 , a reduced Tafel slope (65.4 mV dec -1 ), and negligible activity decay after 12 h of chronoamperometry. By virtue of its enhanced photo response, excellent light harvesting ability, and increased interfacial kinetics of charge separation, the NiTe electrode under simulated solar illumination displays exceptional photoelectrochemical performance exhibiting overpotential of 165 mV at current density of 10 mA cm -2 , which is about 96 mV less than on dark conditions. In addition, Density Functional Theory investigations have been carried out on the NiTe surface, the results of which demonstrated a greater adsorption energy for intermediate -OH on the catalyst site. Since the -OH adsorption on the catalyst site correlates to catalyst activation, it indicates the facile electrocatalytic activity of NiTe owing to favorable catalyst activation. DFT calculations also revealed the facile charge density redistribution following intermediate -OH adsorption on the NiTe surface. This work demonstrates that arrays of NiTe elongated nanostructure are a promising option for both electrochemical and photoelectrocatalytic water oxidation and offers broad suggestions for developing effective PEC devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Tunnel oxide passivating contact enabled by polysilicon on ultra-thin SiO 2 for advanced silicon radiation detectors

Conventional silicon junction detectors encounter significant carrier recombination within the heavily doped p⁺ and n⁺ layers, as well as beneath the metal contact regions, creating the so-called “dead layers”, especially on the detector side. In this study, we present the tunnel oxide passivating contact with doped polysilicon on oxide, which demonstrates exceptional surface passivation and carrier selectivity. The key innovation lies in an ultra-thin (~ 1.5 nm) interfacial oxide layer that facilitates efficient majority carrier transportation via tunneling while effectively block minority carriers. Remarkably low saturation current densities, ranging from 5 to 10 fA/cm² even with the metal contact, underscore the superiority of both n-type and p-type tunnel oxide passivating contacts. In contrast, conventional p–n junction or high-low junction exhibit saturation current densities ranging from 10 to 90 fA/cm² in the studied p⁺ and n⁺ layers with surface passivation schemes due to Auger recombination and surface recombination, and 1000–6000 fA/cm² with metal contacts due to intense metal-induced recombination at the interface. These findings indicate the potential and superiority of implementing n-type tunnel oxide passivating contact on the detector side and p-type contact on the back side for advanced silicon radiation detectors. This approach would enable thorough collection of generated charge carriers along the track of incident ionizing radiation particles, leading to improved energy resolution and reduced noise levels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

Temperature-Dependent Carrier Extraction and the Effects of Excitons on Emission and Photovoltaic Performance in Cs0.05FA0.79MA0.16Pb(I0.83Br0.17)3 Solar Cells

The photovoltaic parameters of triple cation perovskite [Cs0.05FA0.79MA0.16Pb(I0.83Br0.17)3] solar cells are investigated focusing on the electro-optical properties and differences in performance at low and high temperatures. The signature of a parasitic barrier to carrier extraction is observed at low temperatures, which results in a loss of performance at T < 200 K. Intensity-dependent measurements indicate extraction across this parasitic interface is limited by a combination of the exciton binding energy and thermionic emission. However, the photovoltaic performance of the device is recovered at low intensity - where the photocarrier generation rate threshold is lower than the thermionic extraction rate. Loss of solar cell performance is also observed to be strongly correlated to an increase in photoluminescence intensity, indicating inhibited carrier extraction results in strong radiative recombination and that these systems do not appear to be limited by significant thermally activated non-radiative processes. Evidence of limited carrier extraction due to excitonic effects is also observed with a strong anti-correlation in photoluminescence and carrier extraction observed at lower temperatures.

barrier↗