Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Design and synthesis of biobased superhydrophobic biochar catalyst derived from Citrus sinensis for biodiesel production using inedible oil feedstocks

In an one-pot in situ trans/esterification of low-grade feedstocks, the simultaneous presence of triglycerides (TAGs) and free fatty acids (FFAs) presents a dual catalytic challenge. While TAGs undergo transesterification to form biodiesel and glycerol, FFAs present in the feedstocks are esterified simultaneously, producing water as a by-product. This water can deactivate acid catalysts by interacting with their active sites, reducing catalytic efficiency and reusability. To overcome this, we developed a hydrophobic sulfonic acid-functionalized biochar catalyst derived from Citrus sinensis (orange peel) via sulfonation with H 2 SO 4 and subsequent silylation using hexamethyldisilazane (HMDS). The optimized catalyst exhibited a high surface area (355.09 m 2 g −1 ), sulfur content (5.33 wt%), and strong hydrophobicity (water contact angle: 154°). Compared to non-hydrophobic analogs, it showed enhanced activity and reusability (up to 10 cycles). Using response surface methodology with central composite design, a biodiesel yield of 99.1 ± 0.4% was achieved under optimal conditions. Life cycle assessment was performed to evaluate the environmental impacts of biodiesel production utilising the synthesized catalyst, considering 1000 kg of biodiesel produced as 1 functional unit. In conclusion, the recorded results showed the cumulative abiotic depletion of fossil resources over the entire biodiesel production process as 87 243.423 MJ and global warming potential as 4103.494 kg CO 2 equivalent.

Biochar↗

A First-Principles Approach to Modeling Surface Site Stabilities on Multimetallic Catalysts

The study of multimetallic alloys and the multitude of possible surface compositions have sparked a tremendous interest in engineering low-cost materials with high activity and selectivity in heterogeneous catalysis. Multimetallic systems provide complementary functionalities and an unprecedented tunability when designing catalyst formulations. However, due to their immense structural and compositional complexity, the investigation and identification of an optimal catalyst is a tedious and time-consuming process, both experimentally and theoretically. Therefore, theoretical design principles are highly desirable to accelerate the screening of catalyst structures across the vast compositional space. In this paper, we introduce a simple and general model for predicting the site stability of multimetallic surfaces and nanoparticles, which is based on physical principles. The model requires only a small set of density functional theory (DFT) calculations of metal atom binding energies on monometallic and dilute alloy surface slabs to optimize the parameters in the simple model. The resulting model allows for the quantification of the stability of any particular atom site in any conceivable chemical environment across a wide range of morphologies, sizes, and arrangements by interpolating the derived parameters from a monometallic system to a completely diluted alloyed system. Herein, we demonstrate the robustness of the model across an extensive data set of transition metal alloy surfaces and 147-atoms cuboctahedral nanoparticles (NPs) composed of IrRhRu and PtPdRu. In conclusion, our approach yields mean absolute errors of ≈0.15 (IrRhRu), 0.20 (PtPdRu), 0.19 (IrRhRu NP), and 0.26 (PtPdRu NP) eV relative to site binding energies calculated using DFT.

36 MATERIALS SCIENCE↗

Enhanced catalytic performance of Zr modified CuO/ZnO/Al 2 O 3 catalyst for methanol and DME synthesis via CO 2 hydrogenation

Zirconium (Zr) modified CuO/ZnO/Al 2 O 3 (CZA) catalysts with different aluminum (Al) and Zr contents were synthesized by the co-precipitation method. The synthesized CuO/ZnO/ZrO 2 /Al 2 O 3 (CZZA) catalysts were comprehensively characterized and studied for methanol synthesis via CO 2 hydrogenation. The CZZA catalyst showed the highest methanol yield of 12.4 % at 220 °C and 2.76 MPa with an optimized catalyst composition of Cu/Zn/Zr/Al (atomic ratio) at 4:2:1:0.5. The CZZA catalyst showed better activity than that of the CZA catalyst and a superior stability for methanol synthesis. There was no decrease in the BET surface area and very little coke formation for the spent CZZA catalyst, after 300 h of methanol synthesis. Bifunctional catalysts, composed of CZZA and HZSM-5, were investigated for dimethyl ether (DME) synthesis directly from CO 2 hydrogenation, and a maximum DME yield of 18.3 % was obtained at a reaction temperature of 240 °C and a pressure of 2.76 MPa. The stability of the bifunctional CZZA and HZSM-5 catalyst during the DME synthesis also significantly improved, as compared to that of the CZA and HZSM-5. A significant decrease in the BET surface area and an increase in coking on the spent CZZA catalyst were observed after 100 h of DME synthesis, indicating a detrimental effect on CZZA stability when a HZSM-5 catalyst was present. The changes in structural properties (e.g., BET surface area and crystallinity) and coking for HZSM-5 could be responsible for the deactivation of the bifunctional catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and visible-light photocatalytic properties of BiNbO₄ and BiTaO₄ by a citrate method

Visible-light photcatalysts of BiNbO₄ and BiTaO₄ powders have been successfully synthesized by a citrate method. The formation of pure triclinic phase of BiNbO₄ and BiTaO₄ at low temperature of 700 °C can be attributed to the advantage of the citrate method. The photocatalytic activity and possible mechanism were investigated deeply. For BiNbO₄ particles, the mechanism of methyl violet (MV) degradation under visible light irradiation involves photocatalytic and photosensitization pathways and the catalyst specific surface area has dominant influence. While for BiTaO₄ particles, the dominant mechanism arises from photosensitization pathways and a trade off between high specific surface area and good crystallinity is achieved. BiNbO₄ powder calcined at 700 °C shows the best photocatalytic efficiency among these catalysts, which is ascribed to its large surface area and more positive conduction band level. The optimal catalyst loading, additive H₂O₂ concentration and pH value is around 1 g/L, 2 mmol/L and 8 mmol/L, respectively. - Graphical abstract: Photodegradation performance and adsorption ability of BiNbO₄ and BiTaO₄ powders, respectively. BNO700 with the best photocatalytic efficiency is ascribed to its large surface area and more positive conduction band level. Highlights: • Pure BiNbO₄ and BiTaO₄ powders were prepared by a citrate method. • Excellent performance of visible-light degradation of MV was observed. • Different MV degradation mechanism for BiNbO₄ and BiTaO₄ powders was proposed. • BNO700 has large surface area and more positive conduction band level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A molecule-like PtAu24(SC6H13)18 nanocluster as an electrocatalyst for hydrogen production

The theoretically predicted volcano plot for hydrogen production shows the best catalyst as the one that ensures that the hydrogen binding step is thermodynamically neutral. However, the experimental realization of this concept has suffered from the inherent surface heterogeneity of solid catalysts. It is even more challenging for molecular catalysts because of their complex chemical environment. Here, we report that the thermoneutral catalyst can be prepared by simple doping of a platinum atom into a molecule-like gold nanocluster. The catalytic activity of the resulting bimetallic nanocluster, PtAu24(SC6H13)18, for the hydrogen production is found to be significantly higher than reported catalysts. It is even better than the benchmarking platinum catalyst. The molecule-like bimetallic nanocluster represents a class of catalysts that bridge homogeneous and heterogeneous catalysis and may provide a platform for the discovery of finely optimized catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing Ceria/Alumina for Efficient Trapping of Platinum Single Atoms

Cerium oxide (ceria) has been shown to be very effective at trapping platinum atoms, due to formation of stable surface complexes at step edges, where coordinatively unsaturated cerium cations are present. But ceria loses its effectiveness when heated to high temperatures, due to loss of surface area and growth in particle size associated with sintering of the oxide. Being a rare-earth, and with limited supplies worldwide, it is important to develop methods to improve the effectiveness of ceria as a catalyst support. Here we explore the performance for trapping Pt atoms when the ceria is supported on a high surface area alumina carrier. This helps create a more sustainable catalyst formulation, especially if we can retain the high dispersion of Pt seen on ceria supports. For this work, we studied the atom trapping efficacy of ceria/alumina samples with increasing ceria content (8 wt% - 50%) and contrasted the behavior with pure ceria. Electron microscopy reveals that when dispersed on alumina, ceria is present in the form of crystalline nanoparticles as well as isolated cerium ions. These two forms of ceria differ markedly in their ability to trap Pt atoms. Atomically dispersed cerium is present in the form of Ce 3+ cations on alumina, however this form of ceria is not effective for trapping Pt atoms. Our results show that the atom trapped Pt resides primarily on crystalline ceria nanoparticles. CO oxidation was used as a probe reaction to evaluate the performance of these Pt AT /ceria-alumina catalysts. As a result, we conclude that over the range of ceria loadings we investigated, 50% ceria/alumina represents the optimal catalyst support for achieving high surface area and atom trapping efficiency while helping reduce the total ceria content in this catalyst system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Biomass-Derived Ethers for Use as Fuels and Lubricants

Ethers synthesized from biomass-derived compounds have exceptional properties as fuels, lubricants, and specialty chemicals and can serve as replacements for petroleum-derived products. Recent efforts have identified heterogeneous catalysts for the selective synthesis of ethers from alcohols, aldehydes, ketones, furans, esters, olefins, carboxylic acids, and other molecules derived from biomass. This Review highlights the scope of etherification reactions and provides insights into the choice of catalysts and reaction conditions best suited for producing targeted ethers from the available starting materials. First, the properties of ethers for specific applications and the methods by which synthons for ether synthesis can be obtained from biomass are discussed. Then the progress that has been made on the synthesis of ethers via the following methods is summarized: direct etherification of alcohols; reductive etherification of alcohols with aldehydes or ketones; etherification of furanic compounds, esters, and carboxylic acids; and the addition of alcohols to olefins. Next, the mechanisms of these reactions and catalyst properties required to promote them are discussed, with the goal of understanding how reaction conditions can be tuned to optimize catalyst activity and selectivity towards desired ethers. Finally, the Review closes by examining the tradeoffs between catalyst selectivity, activity, stability, and reaction conditions required to achieve the most economically and environmentally favorable routes to biomass-derived ethers.

09 BIOMASS FUELS↗

Deciphering electrocatalysts with multimodal operando approaches

Here, the electrocatalytic processes of a copper catalyst during nitrate electroreduction are unveiled by correlated operando microscopy and spectroscopy. Catalysts are vital to the modern chemical industry, yet their development has largely relied on trial-and-error approaches. Optimizing catalysts requires a fundamental understanding of their structure–chemical property behaviour under operational conditions. However, operando characterization remains challenging, especially for reactions occurring in the complex and dynamic liquid environments of electrochemical systems. Over the past decade, the rapid development of in situ and operando environmental transmission electron microscopy (ETEM) and microelectromechanical system (MEMS)-based closed-cell holders, enabling environmental studies within the vacuum environment of transmission electron microscopy (TEM), has substantively advanced understanding of heterogeneous catalysis, notably for gas-phase reactions. In situ ETEM enables the direct observation of the catalyst evolution in terms of structure, morphology and chemical state at the nano-to-atomic scale, providing insights into their correlation with catalytic performance.

36 MATERIALS SCIENCE↗

Hydrogen Production from Polyethylene Pyrolysis

Hydrogen is anticipated to play a pivotal role in the future of clean energy and decarbonization efforts, serving as an energy storage medium, a power generation source, and a clean fuel for transportation. While most hydrogen is produced from carbonaceous fossil feedstocks like natural gas, petroleum, and coal, there is growing interest in using refuse-derived fuels such as waste plastics and municipal solid waste (MSW) as alternative feedstocks. Thermochemical processes such as pyrolysis and catalytic cracking can convert nonrecyclable plastics and organic MSW components to produce hydrogen with lower life cycle greenhouse gas emissions when coupled with CO 2 capture. Such approaches not only address waste-management challenges but also reduce methane emissions from landfills. Furthermore, waste feedstocks are low cost and can support meeting demands for hydrogen across various industries. In this work we examined production of hydrogen from high-density polyethylene (HDPE) as a model polymer using pyrolysis. Analytical studies of pyrolysis utilizing gas chromatography–mass spectrometry (GC/MS) provide insights into conversion pathways for plastic waste, potentially reducing the environmental footprint of traditional hydrogen production methods. This work generates a baseline methodology for hydrogen production from plastic pyrolysis with and without a catalyst and the necessary product distribution baseline from key single plastics. The effect of pyrolysis temperature on the conversion of HDPE was evaluated both with and without a catalyst(s), and the product distributions measured via GC/MS were identified and hydrogen formation was quantified. These results will help guide future research efforts to optimize catalysts and processes for more efficient hydrogen production and mixed plastic waste management.

Catalysts↗

Activated carbon supported Ni, Fe, and bimetallic NiFe catalysts for CO x -free H 2 production by microwave methane pyrolysis

The goal of this study was to test the effect of metal-impregnated carbon-based catalysts on the conversion of methane to hydrogen gas and solid carbon using microwave reactor technology. Monometallic and bimetallic catalysts on activated carbon supports (Ni/AC, Fe/AC, Ni-Fe/AC) are compared during methane pyrolysis testing. Catalytic methane pyrolysis was carried out in a microwave reactor at reaction temperatures of 600 °C and 800 °C. For comparison, one of the catalysts (Ni-Fe/AC) was tested in a conventionally heated reactor at 800 °C. The prepared catalysts were characterized by X-ray diffraction (XRD), while post-reaction catalysts were characterized by XRD and SEM. During reaction testing, the monometallic Ni/AC catalyst exhibited the best catalytic activity (CH 4 conversion: 46.0 and H 2 yield: 46.9%) when reacted in the microwave reactor, however, it suffered from rapid deactivation from carbon deposition (carbon yield: 0.39 gC/g catalyst). The bimetallic Ni-Fe/AC catalyst was slightly less active (CH 4 conversion: 36.9 and H 2 yield: 40.5%) but it was more resistant to carbon formation (carbon yield: 0.27 gC/g catalyst) suggesting it may have greater long-term stability. The Ni-Fe/AC catalyst was also the most energy efficient as it required the least microwave power to maintain the 800 °C reaction temperature compared to the other catalysts tested. Methane conversion of the bimetallic Ni-Fe/AC at 800 °C under microwave irradiation was three times the conversion under conventional heating at the same reaction temperature. Finally, this work demonstrates the use of microwave-specific catalysts for catalytic methane pyrolysis in a microwave reactor, and can be used as a foundation for further methane pyrolysis process and catalyst optimization for CO x -free H 2 production.

08 HYDROGEN↗

Differentiating supported platinum single atoms, clusters and nanoparticles by styrene hydrogenation

Supported metal catalysts often consist of metal sites ranging from nanoparticles to subnanometer clusters and single atoms. It remains a necessity to differentiate these sites to guide design of optimal catalysts. Here we report a simple method to assess the distribution of metal active sites in catalyst samples. The method takes the advantage of the structure sensitivity of styrene hydrogenation over titania supported platinum (Pt) catalysts with Pt aggregates varied from single atom to ~1.40 nm nanoparticles. The physicochemical properties were characterized by STEM, XPS, XANES, H2-TPR and CO-chemisorption measurements. The reactivity of Pt sites was quantified by styrene hydrogenation at ambient conditions. The nanometer-sized Pt clusters have significantly higher activity than Pt nanoparticles, sub-nanometer clusters or isolated single atoms. Additionally, the relationship between activity and structural/electronic properties of Pt sites influenced by particle sizes was discussed. Similar relationship was found in the carbon supported Pt catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Perspective of Promoting Direct Methane-to-Methanol Conversion at Complex Metal Oxide–Metal Interfaces

Direct methane conversion to methanol has been considered as an effective and economic way to release greenhouse effects and current high demand on methanol in industry. However, the process has long been challenging due to lack of viable catalysts to compromise the activation of methane that typically occurs high temperatures and retaining of produced methanol that requires mild conditions. Here, this perspective demonstrates an effective strategy to promote direct methane to methanol conversion by engineering the active sites and chemical environments at complex metal oxide - copper oxide - copper interfaces. Such effort strongly depends on the extensive theoretical studies by combining density functional theory (DFT) calculations and kinetic Monte Carlo (KMC) simulations to provide in-depth understanding of reaction mechanism and active sites, which built the strong basis to enable the identification of design principles and advance the catalyst optimization for selective CH 4 -to-CH 3 OH conversion.

03 NATURAL GAS↗

Polyfunctional catalyst for processiing benzene fractions

A by-product of the coke industry is a raw benzene fraction benzene- 1 which may serve as for catalytic processes. The paper reports a study on the influence of the composition and temperatures on the activity and selectivity of NiO-V{sub 2}O{sub 6}-MoO{sub 3}/{gamma}-Al{sub 2}O{sub 3} catalysts and the corresponding binary and tertiary subsystems are studied by a pulse method in model reactions; the hydrodealkylating of toluene and the hydrodesulfurizing of thioprhene. The optimal catalyst composition is established. The new catalyst is compared with industrial catalysts.

01 COAL, LIGNITE, AND PEAT↗

Mild oxidation of methane to methanol or acetic acid on supported isolated rhodium catalysts

An efficient and direct method of catalytic conversion of methane to liquid methanol and other oxygenates would be of considerable practical value. However, it remains an unsolved problem in catalysis, as typically it involves expensive or corrosive oxidants or reaction media(5-8) that are not amenable to commercialization. Although methane can be directly converted to methanol using molecular oxygen under mild conditions in the gas phase, the process is either stoichiometric (and therefore requires a water extraction step) or is too slow and low-yielding to be practical. Methane could, in principle, also be transformed through direct oxidative carbonylation to acetic acid, which is commercially obtained through methane steam reforming, methanol synthesis, and subsequent methanol carbonylation on homogeneous catalysts. However, an effective catalyst for the direct carbonylation of methane to acetic acid, which might enable the economical small-scale utilization of natural gas that is currently flared or stranded, has not yet been reported. Here we show that mononuclear rhodium species, anchored on a zeolite or titanium dioxide support suspended in aqueous solution, catalyse the direct conversion of methane to methanol and acetic acid, using oxygen and carbon monoxide under mild conditions. Here, we find that the two products form through independent pathways, which allows us to tune the conversion: three-hour-long batch-reactor tests conducted at 150 degrees Celsius, using either the zeolitesupported or the titanium-dioxide-supported catalyst, yield around 22,000 micromoles of acetic acid per gram of catalyst, or around 230 micromoles of methanol per gram of catalyst, respectively, with selectivities of 60-100 per cent. Finally, we anticipate that these unusually high activities, despite still being too low for commercial application, may guide the development of optimized catalysts and practical processes for the direct conversion of methane to methanol, acetic acid and other useful chemicals.

09 BIOMASS FUELS↗

CaMn 0.9 Ti 0.1 O 3 based redox catalysts for chemical looping – Oxidative dehydrogenation of ethane: Effects of Na 2 MoO 4 promoter and degree of reduction on the reaction kinetics

Reduction kinetics and stability of 20 wt% Na 2 MoO 4 -promoted CaMn 0.9 Ti 0.1 O 3 were investigated for its applications in Chemical Looping – Oxidative Dehydrogenation (CL-ODH) of ethane, a potential alternative for ethylene production with higher efficiency and lower emissions. Here, the present work reports a kinetics model and parameters for a Na 2 MoO 4 -promoted, Ti-doped CaMnO 3 (CaMn 0.9 Ti 0.1 O 3 ) redox catalyst under H 2 and C 2 H 4 . A first-order reaction model provides the best fit for the reduction of Na 2 MoO 4 /CaMn 0.9 Ti 0.1 O 3 under H 2 , while the C 2 H 4 reduction is well described by an Avrami–Erofe’ev model. The activation energy for C 2 H 4 oxidation is approximately three times higher than that for H 2 conversion, showing that the activation of C 2 H 4 is significantly more difficult on the surface of the redox catalyst. The reduction rate of Na 2 MoO 4 /CaMn 0.9 Ti 0.1 O 3 under H 2 at 750 °C is more than two orders of magnitude greater than that under C 2 H 4 , while the reduction rate of unpromoted CaMn 0.9 Ti 0.1 O 3 is comparable under H 2 and C 2 H 4 , showing that the addition of Na 2 MoO 4 effectively suppresses C 2 H 4 combustion relative to H 2 oxidation. The kinetics results for Na 2 MoO 4 /CaMn 0.9 Ti 0.1 O 3 confirm its excellent selectivity towards hydrogen combustion, making it a promising candidate under CL-ODH. Additionally, the stability of the CaMn 0.9 Ti 0.1 O 3 @ Na 2 MoO 4 core-shell structure, which was the underlying reason for the excellent selectivity, was examined under both shallow and deep reductions. It was determined that deep reduction of the redox catalyst, e.g. higher than 80% solid conversion, would lead to loss of sodium and hence to decreased selectivity for hydrogen combustion. In contrast, the core-shell structure was well-maintained, exhibiting excellent performance after 50 redox cycles when deep reduction of the redox catalyst was avoided. This study offers a basis for both the CL-ODH reactor design and redox catalyst optimizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of Efficient Molecular Electrocatalysts for Water and Carbon Dioxide Reduction Using Predictive Models of Thermodynamic Properties

Objectives: 1) To design and synthesize water soluble transition metal complexes that function as electrocatalysts for the reduction of water to hydrogen or carbon dioxide to formate 2) To experimentally measure thermochemical properties, such as hydride donor ability, and use these quantities to optimize catalyst performance in solutions of varying pH 3) To incorporate results from detailed mechanistic and kinetic studies to direct improvements in catalyst design 4) To use thermochemical data from objective 2 to generate predictive models for the properties of new complexes to apply to the development of catalysts for other reductive reactions, with an emphasis on carbon dioxide reduction to methanol Description: Wide-spread implementation of renewable but intermittent energy sources, such as solar, requires the development of efficient methods for energy storage. The high energy density of chemical bonds makes chemical fuels an ideal solution for energy storage. Hydrogen and reduced carbon compounds have been proposed as ideal candidates for chemical fuels. However, the generation of chemical fuels from electricity requires competent electrocatalysts. The proposed research focuses on developing electrocatalysts for the reduction of water to hydrogen, and carbon dioxide to formate. Both products can be used directly as an energy carrier in fuel cells, or as a reductant for more saturated chemical fuels. Hydrogen is the most common fuel used in current commercial fuel cells. Additionally, there is interest in formic acid as a liquid carrier for hydrogen because of its increased storage density and ease of dehydrogenation. Formate is also an intermediate in the sequential reduction of CO 2 to methanol, another potential chemical fuel with high energy storage density. Despite the utility of formate as a chemical fuel or precursor, there are very few examples of electrocatalysts for its production from CO 2 , and even fewer demonstrate high product selectivity. In heterogeneous catalysis, the Sabatier principle is used to generate volcano curves that describe optimal thermochemical properties for key intermediates that result in peak catalytic activity. In most cases, such as hydrogen production and oxidation, the most favorable metals (Pt, Re, Rh, and Ir) are rare and expensive. Molecular inorganic complexes provide an opportunity to use electronic and steric ligand effects to tune the critical thermodynamic parameters of abundant metals to values comparable to key surface intermediates on precious metals. This principle will be applied to the design of aqueous homogeneous catalysts for the reduction of H 2 O and CO 2 optimized to function at specific pH ranges. The critical intermediate in both of these reactions is a metal hydride. The strength of this bond, or hydricity (ΔGH - ) dictates the overall thermodynamics of the reduction of H + to H 2 and the sequential reduction of C1 substrates, such as CO 2 , CO, and H 2 CO (the latter to CH 3 OH). ΔGH - will be systematically measured for a series of first row metal complexes to form predictive models for metal and ligand electronic effects. Benefits and Outcomes: This approach addresses thermodynamic requirements essential for energy-efficient catalyst design and transition state barrier considerations for faster catalysis. The advancements made from this research will include the discovery of efficient, stable, and fast catalysts for hydrogen and formate generation from electricity. The ability to store energy efficiently is critical to the widespread use of renewable energy schemes. This provides a viable solution to produce high energy density fuels for stationary and mobile energy applications. The fundamental research conducted is also directly applicable to the design of catalysts for the generation of further reduced products such as methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring Catalyst Compositions for Microwave-Assisted Methane Dehydroaromatization

The flaring of natural gas in U.S. shale regions remains a challenge for producers. One alternative to flaring is converting the wasted gas into valuable chemicals. Microwave-based processes offer a promising solution, potentially enabling the development of compact, modular systems for on-site production of chemicals, such as aromatics, from natural gas. This is due to the advantages of microwave heating, including efficient heating of compact volumes, accelerated reaction rates, and electrification of heating. However, developing effective catalysts for microwave-based processes is challenging, as conventional materials often require modification to be effectively heated by microwaves. This study provides an overview of a catalyst development project focused on a molybdenum-supported zeolite catalyst, optimized for the direct conversion of methane into aromatics under microwave irradiation. It details the synthesis, characterization, and the effects of promoters, as well as computational efforts undertaken to understand and enhance the catalyst's performance.

flare gas↗