Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

An Atomic View of Cation Diffusion Pathways from Single‐Crystal Topochemical Transformations

Abstract The diffusion pathways of Li‐ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li‐ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li‐ion diffusion at the atomistic level. Here, by using topochemical Li‐ion insertion and extraction to induce single‐crystal‐to‐single‐crystal transformations in a tunnel‐structured V 2 O 5 polymorph, coupled with operando powder X‐ray diffraction, we leverage single‐crystal X‐ray diffraction to identify the sequence of lattice interstitial sites preferred by Li‐ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li‐ions in this cathode material in kinetic states and provide an experimentally validated angstrom‐level 3D picture of atomic pathways thus far only conjectured through DFT calculations.

Handy, Joseph V.↗
DOE OSTI2022

Highly Efficient Organosulfur and Lithium‐Metal Hosts Enabled by C@Fe 3 N Sponge

Abstract Lithium‐organosulfur (Li‐OS) batteries, despite possessing high theoretical specific capacity, encounter a few practical challenges, including unsatisfactory lifespan and low active material utilization under realistic conditions. Here, diisoropyl xanthogen polysulfide (DIXPS) has been selected as a model organosulfur compound to investigate the practical feasibility of Li‐OS batteries under realistic conditions. A well‐designed freestanding carbon sponge decorated with Fe 3 N nanoparticles (C@Fe 3 N) is introduced into the Li‐OS cells as a scaffold for both Li and DIXPS. The lithiophilic property of the C@Fe 3 N host guides uniform lithium deposition at the anode, and the catalysis of the DIXPS conversion reaction promotes the kinetics at the cathode. Impressively, the synergistic effect of C@Fe 3 N leads to an extremely stable cycling performance over 1 000 cycles in a Li‐OS full cell under realistic conditions.

He, Jiarui↗
DOE OSTI2022

Highly Efficient Organosulfur and Lithium-Metal Hosts Enabled by C@Fe 3 N Sponge

Lithium-organosulfur (Li-OS) batteries, despite possessing high theoretical specific capacity, encounter a few practical challenges, including unsatisfactory lifespan and low active material utilization under realistic conditions. Here, diisoropyl xanthogen polysulfide (DIXPS) has been selected as a model organosulfur compound to investigate the practical feasibility of Li-OS batteries under realistic conditions. A well-designed freestanding carbon sponge decorated with Fe 3 N nanoparticles (C@Fe 3 N) is introduced into the Li-OS cells as a scaffold for both Li and DIXPS. The lithiophilic property of the C@Fe 3 N host guides uniform lithium deposition at the anode, and the catalysis of the DIXPS conversion reaction promotes the kinetics at the cathode. Impressively, the synergistic effect of C@Fe 3 N leads to an extremely stable cycling performance over 1000 cycles in a Li-OS full cell under realistic conditions.

25 ENERGY STORAGE↗
DOE OSTI2021

Nanoscale Design of Pd-Based Electrocatalysts for Oxygen Reduction Reaction Enhancement in Alkaline Media

Palladium (Pd)-based electrocatalysts have recently emerged as one class of the foremost promising candidates for the oxygen reduction reaction (ORR) in alkaline media due to their excellent ORR activity and durability and lower costs compared with platinum. Insightful design of Pd-based nano-architectures with optimized active surface sites and maximal intrinsic performance is central to promoting the ORR applications. To further accelerate the sluggish ORR kinetics at the cathode of fuel cells and substantially decrease the overall cost of the electrocatalysts, various strategies, including controlled sizes and shapes with selected crystallographic facets, crystal-phase engineering, heteroatom doping, tailored surface strains, and surface engineering by de-alloying, have been extensively developed in the past decade. Here in this review, a brief introduction to the fundamental ORR mechanisms of Pd-based electrocatalysts in alkaline media is presented, followed by a thorough discussion on various strategies for delicately designing high-performance Pd-based catalysts with corresponding examples. Thereafter, the perspectives and new insights into the challenges are outlined, and some emerging research directions related to the rational design and controlled synthesis of Pd-based ORR electrocatalysts are also proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Rapid and Efficient Arsenic Removal by Iron Electrocoagulation Enabled with in Situ Generation of Hydrogen Peroxide

Millions of people are exposed to toxic levels of dissolved arsenic in groundwater used for drinking. Iron electrocoagulation (FeEC) has been demonstrated as an effective technology to remove arsenic at an affordable price. However, FeEC requires long operating times (~hours) to remove dissolved arsenic due to inherent kinetics limitations. Air cathode Assisted Iron Electrocoagulation (ACAIE) overcomes this limitation by cathodically generating H 2 O 2 in situ. In ACAIE operation, rapid oxidation of Fe(II) and complete oxidation and removal of As(III) are achieved. Here, we compare FeEC and ACAIE for removing As(III) from an initial concentration of 1464 μg/L, aiming for a final concentration of less than 4 μg/L. We demonstrate that at short electrolysis times (0.5 min), i.e., high charge dosage rates (1200 C/L/min), ACAIE consistently outperformed FeEC in bringing arsenic levels to less than WHO-MCL of 10 μg/L. Using XRD and XAS data, we conclusively show that poor arsenic removal in FeEC arises from incomplete As(III) oxidation, ineffective Fe(II) oxidation and the formation of Fe(II–III) (hydr)oxides at short electrolysis times (<20 min). Finally, we report successful ACAIE performance (retention time 19 s) in removing dissolved arsenic from contaminated groundwater in rural California.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Spin State Modulation via Magnetic Fields in Fe Single Atom Catalysts for High-Performance Aqueous Zinc–Sulfur Batteries

Aqueous zinc–sulfur battery has garnered significant attention as a high-energy, low-cost, and safe energy storage system. However, the multielectron transfer kinetics of sulfur cathodes are relatively slow, presenting challenges such as limited sulfur utilization and lower discharge voltage, which significantly hinder their practical applications. Here, in this study, we explored a comprehensive design approach for high-performance, long-cycle aqueous zinc–sulfur batteries. The simultaneous introduction of ZnI 2 and Fe single atoms (Fe-SAs) as catalytically active agents decouples the redox reactions, effectively facilitating ZnS oxidation and S reduction separately. The application of an external magnetic field regulates the spin state of Fe-SAs, further enhancing their catalytic activity and electron transfer capability. Electrochemical tests demonstrate that the S@Fe-NC HS/ZnI 2 cathode assembled under a magnetic field exhibits excellent rate performance, achieving an impressive specific capacity of 1399 mAh g –1 at a high current density of 5 A g –1 and good cycling stability over 300 cycles, representing the highest reported high-current discharge capacity to date. This study provides a comprehensive design framework for optimizing zinc–sulfur (Zn–S) battery performance and elucidates the influence of magnetic field-induced spin state modulation on catalytic behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ambient Temperature Sodium Polysulfide Catholyte for Nonaqueous Redox Flow Batteries

This study reports a sodium polysulfide catholyte for nonaqueous redox flow batteries (RFBs). We demonstrate reversible capacities up to 200 mAh/gS with negligible fade over 250 cycles at room temperature for sodium polysulfide|biphenyl full cells containing Na + ß '' -Al 2 O 3 solid electrolyte (BASE) membranes. Interestingly, formation of insoluble S and Na 2 S 4 phases did not inhibit the catholyte's cycle life which is likely due to the low concentrations used in the lab-scale prototypes. 3-electrode galvanostatic AC impedance measurements demonstrate that voltage losses were dominated by charge transfer at the cathode, and relevant kinetic parameters (i.e., transfer coefficients and exchange current density) were calculated through a Tafel analysis. To the best of our knowledge, this is the first report applying such an impedance approach to nonaqueous RFBs. Overall, the use of low-cost active materials makes sodium polysulfide|biphenyl RFBs promising for long duration energy storage applications. Furthermore, if strategies are developed to increase the solubility of S and/or low order polysulfides (Na 2 S x , x ≤ 4), specific energies up to 100 Wh kg -1 (including combined mass of the anolyte and catholyte) can be achieved.

25 ENERGY STORAGE↗
DOE OSTI2025

3D printing of architected sulfur cathodes with dual-site atomic catalysts for accelerated polysulfide kinetics and Li-ion transport in high areal-loading lithium–sulfur batteries

The practical deployment of lithium–sulfur batteries (LSBs) is hindered by fundamental limitations in conventional slurry-cast cathodes, including poor sulfur utilization, sluggish ion transport, and low areal capacity, particularly in thick electrodes required for high energy density. To address these challenges, we present direct ink writing (DIW) as an additive manufacturing strategy to fabricate advanced current-collector-free, 3D-printed sulfur cathodes (3DP S@CoNi-DSACs/NC) with hierarchically porous architectures that enhance lithium-ion diffusion, promote electrolyte penetration, and reduce interfacial resistance. The synergistic effects of Co/Ni dual-atom sites accelerate redox kinetics and mitigate polysulfide shuttling. As a result, the optimized 3DP cathode with a sulfur loading of 5.4 mg cm −2 demonstrated excellent rate capability, delivering a high reversible capacity of 1041.4 mAh g −1 at 1C with 85.5% capacity retention after 1000 cycles, significantly outperforming its cast counterpart. Remarkably, even at a higher sulfur loading of 8.1 mg cm −2 , the 3DP cathode maintains outstanding performance, achieving a discharge capacity of 1538.4 mAh g −1 and an areal capacity of 12.5 mAh cm −2 at 0.1C. This study not only demonstrates the functional integration of catalytically active materials into 3D printable sulfur cathode architectures but also offers a scalable and transformative platform for building high-performance LSBs beyond conventional electrode manufacturing methods.

3D electrode↗
DOE OSTI2023

Interplay of molten salt and dopants in tuning the performance of single-crystalline LiNiO 2

Single-crystalline layered oxide cathodes have seen great research interest in recent years. Adoption of single-crystal morphology improves mechanical robustness and eliminates intergranular boundaries, improving the chemical stability of the cathode. Furthermore, single-crystal cathodes also suffer from worsened lithium-diffusion kinetics stemming from the significantly increased diffusion path lengths. Sluggish lithiation kinetics induce concentration gradients within the cathode particle during cell operation, resulting in the accumulation of lattice strain, which deteriorates cell performance. Foreign dopants have been shown to greatly improve ion diffusion in many high-Ni layered oxide cathode systems. In particular, we identify Ti and Te as promising dopants to ameliorate the slow diffusion kinetics. We find that doping 1 mol.% Te into single crystal LiNiO 2 greatly improves Li + diffusivity, as determined through galvanostatic intermittent titration technique. Further incorporating 2 mol.% Al and pairing with lithium-metal anode in a localized high concentration electrolyte (LHCE) delivers 206 mA h g -1 at C/3 rate and retains 94% capacity after 100 cycles in Li metal half cells. By addressing kinetically mediated degradation with Te doping, and surface-based degradation with Al and LHCE, the cathode experiences very little polarization and overpotential growth, enabling stable cycling with high accessible capacity.

25 ENERGY STORAGE↗
DOE OSTI2023

Twin Boundaries Contribute to The First Cycle Irreversibility of LiNiO 2

Abstract LiNiO 2 remains a target for layered oxide Li‐ion cathode development as it can theoretically deliver the highest energy density of this materials class. In practice, LiNiO 2 suffers from poor capacity retention due to electrochemically‐induced structural changes. While the impact of Ni off‐stoichiometry on the electrochemical performance has been extensively studied, that of planar defects present in the as‐synthesized cathode is not well understood. Advanced ex situ and operando structure probes are used to identify and quantify point and planar defects present in as‐synthesized Li 1‐y Ni 1+y O 2 cathodes and monitor their evolution during the first cycle. Specifically, a 7 Li nuclear magnetic resonance (NMR) signature characteristic of Li environments near twin boundaries is identified; an assignment supported by first‐principles calculations and scanning transmission electron microscopy (STEM) images of twin boundary defects. The NMR results suggest that the concentration of twin boundaries depends on the amount of Ni excess. Moreover, operando magnetometry and ex situ synchrotron X‐ray diffraction and NMR demonstrate that these planar defects impede Li reinsertion into the bulk cathode at reasonable discharge rates and contribute to the first cycle irreversible capacity. These findings provide new design rules for Li 1‐y Ni 1+y O 2 cathodes, whereby a reduced concentration of twin boundaries in the pristine material leads to reduced kinetic limitations and improved cathode utilization.

Nguyen, H.↗
DOE OSTI2020

Enabling Facile Anionic Kinetics through Cationic Redox Mediator in Li-Rich Layered Cathodes

Anionic oxygen redox has aroused great interests in developing high-capacity Li-ion battery cathode materials. The fundamental understanding of this concept, compared to cationic redox, has promoted extensive studies on lithium transition metal oxides including those of 4d and 5d transition metals. Lithium ruthenium oxide has been found to exhibit a reversible anionic redox upon cycling. However, lithium-rich layered oxide with anionic redox is still facing great challenges such as sluggish kinetics. Here we investigate the effect of cationic redox on the kinetics of anionic reaction when they are strongly coupled. We report the cobalt substituted lithium ruthenium oxide, where all Ru, Co and O redox participate in the charge compensation mechanism in relatively defined voltage regions. Additionally, the improved anionic kinetics is attributed to the fast cationic Co redox process that serves as a redox mediator. Our work sheds light into the potential direction to address the commonly believed sluggish anionic kinetics in high-capacity oxygen-redox cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

All-solid-state batteries with sulfide electrolytes and high-nickel layered oxide cathodes attract much interest due to their high specific energy. However, their cycling performance is primarily influenced by the interface between the sulfide electrolyte and the high-Ni layered oxide particles, which requires the use of composite cathodes with high ionic and electronic conductivities to achieve a kinetically stable interface inside the cathode. Here, we apply Ti 2 O 3 particles to the high-Ni cathode LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), where Ti 2 O 3 not only acts as an electronic conductor to provide a fast diffusion path for electrons in the composite cathode, but also absorbs the lattice oxygen released from NCM811 cathode during cycling, stabilizing the Li 6 PS 5 Cl/NCM811 interface and suppressing electrolyte oxidation. The as-modified cathode exhibits an initial specific capacity of 192 mAh g -1 and retains 166 mAh g -1 after 140 cycles at 0.1C rate with a good capacity retention of 86.5%. Furthermore, the composite cathode displays high rate capability even at 1C rate. By contrast, the unmodified Li 6 PS 5 Cl/NCM811 cathode shows poor cycling performance with only 130 mAh g -1 remaining after 130 cycles. This work provides a new direction for the design of cathodes for all-solid-state batteries that can deliver high specific energy with long cycle life.

25 ENERGY STORAGE↗
DOE OSTI2025

Delineating the kinetic limitations of Mn 2+/3+ redox in LiMn x Fe 1−x PO 4 cathodes for lithium-ion batteries

LiMn x Fe 1−x PO 4 (LMFP) cathodes offer higher energy density than LiFePO 4 due to a higher operating voltage. However, the kinetic limitations of the Mn 2+/3+ redox couple in LMFP restrict its practically achievable capacity and hinder the ability to achieve high energy density. While the shortcomings of Mn 2+/3+ redox are recognized, its behavior and the factors that impact it remain to be fully understood. We present here an in-depth kinetics study of LMFP by utilizing novel techniques, such as chronoamperometry and galvanostatic electrochemical impedance spectroscopy. Compared to moderate-Mn LMFP (40–60% Mn), high-Mn LMFP (80% Mn) experiences reduced capacity, poor rate capability, and heightened impedance during Mn 2+/3+ redox. The oxidation of Mn 2+ to Mn 3+ becomes more resistive during charge due to the formation of Jahn–Teller active Mn 3+ and the increasing charge-transfer insulating behavior of Mn x Fe 1−x PO 4 . However, the impedance associated with Mn 3+ to Mn 2+ reduction remains constant during discharge in the entire region. The protracted Mn2+ oxidation in high-Mn LMFP results in excessive impedance compared to that in moderate-Mn LMFP, even at low C-rates and high cycling temperatures. Despite the promise of high energy density, the extreme kinetic limitations inherent to high-Mn LMFP present a barrier.

25 ENERGY STORAGE↗
DOE OSTI2020

Stabilized Electrode/Electrolyte Interphase by a Saturated Ionic Liquid Electrolyte for High-Voltage NMC532/Si-Graphite Cells

Nonaqueous electrolyte has become one of the technical barriers in enabling Li-ion battery comprising of a high voltage cathode and high capacity anode. Here, we demonstrate a saturated piperidinum bis(fluorosulfonyl)imide ionic liquid (IL) with a LiFSI salt not only supports the redox reaction on the cathode at high voltages, but also shows exceptional kinetic stability on the lithiated anode as evidenced by its improved cycling performance in a NMC532/Si-graphite full cells cycled between 4.6 and 3.0 V. On the basis of the spectroscopic/microscopic analysis and molecular dynamics (MD) simulations, the superior performance of the cells is attributed to the formation of solid-electrolyte-interphase on both electrode as well as unique solvation structure where a deadlocked coordination network is established at the saturated state, which prevents transition metal dissolution into the electrolyte via a solvation process.

25 ENERGY STORAGE↗
DOE OSTI2021

Selenium infiltrated hierarchical hollow carbon spheres display rapid kinetics and extended cycling as lithium metal battery (LMB) cathodes

Lithium metal–selenium (Li–Se) batteries offer high volumetric energy but are limited in their cycling life and fast charge characteristics. Here a facile approach is demonstrated to synthesize hierarchically porous hollow carbon spheres that host Se (Se@HHCS) and allow for state-of-the-art electrochemical performance in a standard carbonate electrolyte (1 M LiPF 6 in 1:1 EC:DEC). The Se@HHCS electrodes display among the most favorable fast charge and cycling behavior reported. For example, they deliver specific capacities of 442 and 357 mA h g -1 after 1500 and 2000 cycles at 5C and 10C, respectively. At 2C, Se@HHCS delivers 558 mA h g -1 after 500 cycles, with cycling coulombic efficiency of 99.9%. Post-mortem microstructural analysis indicates that the structures remain intact during extended cycling. Per GITT analysis, Se@HHCS possesses significantly higher diffusion coefficients in both lithiation and delithiation processes as compared to the baseline. Furthermore, the superior performance of Se@HHCS is directly linked to its macroscopic and nanoscale pore structure: the hollow carbon sphere morphology as well as the remnant open nanoporosity accommodates the 69% volume expansion of the Li to Li 2 Se transformation, with the nanopores also providing a complementary fast ion diffusion path.

25 ENERGY STORAGE↗
DOE OSTI2021

Selective dopant segregation modulates mesoscale reaction kinetics in layered transition metal oxide

Incorporation of foreign elements into the cathode material is broadly adopted by both academia and industry to improve the battery performance. The lack of an in-depth understanding for the underlying mechanism, however, makes it a largely try-and-error process with unsatisfactory efficiency and effectiveness. This is particularly true for the electrochemical reaction kinetics that is heterogeneous over a broad range of length scales and is determined collectively by the cathode’s electronic structure, lattice configuration, and micro-morphology. In this work, we unveiled a facet-dependent dopant segregation effect in Zr-modified single-crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode. By forming kinetically favored corners on the cathode particles, the presence of a trace amount of Zr critically modulates the mesoscale reaction kinetics. Our findings suggest that a delicately controlled dopant distribution is a viable strategy for designing the next-generation battery cathode with superior structural and chemical robustness.

36 MATERIALS SCIENCE↗