SEARCH · Search NASA

Results for “census”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2024

The SAGA Survey. III. A Census of 101 Satellite Systems around Milky Way–mass Galaxies

We present Data Release 3 (DR3) of the Satellites Around Galactic Analogs (SAGA) Survey, a spectroscopic survey characterizing satellite galaxies around Milky Way (MW)-mass galaxies. The SAGA Survey DR3 includes 378 satellites identified across 101 MW-mass systems in the distance range of 25–40.75 Mpc, and an accompanying redshift catalog of background galaxies (including about 46,000 taken by SAGA) in the SAGA footprint of 84.7 deg 2 . The number of confirmed satellites per system ranges from zero to 13, in the stellar mass range of 10 6−10 M ⊙ . Based on a detailed completeness model, this sample accounts for 94% of the true satellite population down to M ⋆ = 10 7.5 M ⊙ . We find that the mass of the most massive satellite in SAGA systems is the strongest predictor of satellite abundance; one-third of the SAGA systems contain LMC-mass satellites, and they tend to have more satellites than the MW. The SAGA satellite radial distribution is less concentrated than the MW's, and the SAGA quenched fraction below 10 8.5 M ⊙ is lower than the MW's, but in both cases, the MW is within 1σ of SAGA system-to-system scatter. SAGA satellites do not exhibit a clear corotating signal as has been suggested in the MW/M31 satellite systems. Although the MW differs in many respects from the typical SAGA system, these differences can be reconciled if the MW is an older, slightly less massive host with a recently accreted LMC/SMC system.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Erratum: “Tripling the Census of Dwarf AGN Candidates Using DESI Early Data” (2025, ApJ, 982, 10)

We identified an error in the EmFit code, which was employed to estimate the emission-line fluxes and widths used in the published article. Specifically, the error spectrum was not corrected for Galactic reddening before being incorporated into the fitting process. Although this does not affect the measured fluxes or line widths, it led to underestimated uncertainties. Consequently, the signal-to-noise ratios (SNRs) for individual sources were systematically overestimated, resulting in a larger number of sources satisfying a given SNR threshold.

Pucha, Ragadeepika [University of Utah, Salt Lake ↗

DOE OSTI2026

A New Record Census of Dwarf AGN and a Bimodal $M_{\rm BH}$-$M_{\star}$ Scaling Relation with DESI DR1

Using the first spectroscopic data release from the Dark Energy Spectroscopic Instrument (DESI DR1), we search for AGN signatures in 1,678,787 low-redshift ($0.001 \le z \le 0.45$) line-emitting galaxies. Based on the [NII]-BPT emission-line ratio diagnostic, we identify AGN in 314,245/1,211,573 (25.9%) high-mass ($\log (M_{\star}/M_{\odot}) > 9.5$) and 9648/467,214 (2.1%) dwarf ($\log (M_{\star}/M_{\odot}) \le 9.5$) galaxies. Among these AGN, 17,949 are broad-line candidates (BL-AGN) with broad H$Î±$ emission, enabling black hole (BH) mass estimates using single-epoch virial methods. We find that the AGN fraction in line-emitting galaxies increases monotonically with stellar mass, rising from $\sim$1.4% at the low-mass end to $\sim$93.3% at the high-mass end. Using the large BL-AGN sample, we extend the $M_{\rm BH} - M_{\star}$ scaling relation down to $\log (M_{\star}/M_{\odot}) \approx 7.8$ and $\log (M_{\rm BH}/M_{\odot}) \approx 4.4$. In the context of high-redshift overmassive BHs, our results suggest that galaxies and their central BHs may follow two distinct evolutionary pathways across cosmic time. With this paper, we release the EmFit value-added catalog, containing emission-line flux and width measurements for $\sim$7.4 million galaxies, the largest catalog with emission-line decomposition into narrow, broad, and outflow components to date. This work significantly expands upon the early DESI results and provides a statistical sample for probing the galaxy$-$BH connection in the low-mass galaxy regime.

Pucha, Ragadeepika [Utah U.; Arizona U., Astron. D↗

DOE OSTI2023

Canopy tree mortality and crown exposure data from the Amacayacu Forest Dynamics Plot, Northwestern Amazon

Data on the mortality of 984 canopy trees, their crown exposure to light (relative to total crown area), growth deviations (relative to conspecifics), tree size, and species’ wood density collected between 2013 and 2019 in 18 ha of the Amacayacu Forest Dynamics Plot, Northwestern Amazon. This dataset contains a single CSV data file. Variable definitions: 1. Species: [character] species identification 2. Family: [character] family of the species 3. tag: [character] unique consecutive for the tree 4. status: [character] status of the tree in the third census (ALIVE or DEAD) 5. wsg: [numeric]: species’ wood density (g cm-3) 6. growth_r1: [numeric]: annual growth rate of the tree between the first and second census (cm y-1) 7. growth_r2: [numeric]: annual growth rate of the tree between the second and third census (cm y-1) 8. gt1: [numeric] modulus transformed growth rate with a lambda of 0.4 for the annual growth rate of the tree between the first and second census (cm y-1) 9. gt2: [numeric]: modulus transformed growth rate with a lambda of 0.4 for the annual growth rate of the tree between the second and third census (cm y-1) 10. rgr1: [numeric] relative growth rate between the first and second census (cm y-1) 11. rgr2: [numeric] relative growth rate between the second and third census (cm y-1) 12. sa_gt: [numeric] species-adjusted modulus transformed growth rate 13. sa_rgr: [numeric] species-adjusted relative growth rate 14. gr_n: [numeric] number of individuals of the species used to calculate the mean and species modulus transformed growth rate 15. dbh_flight: [numeric] diameter at breast height (1.3 m) estimated at the time of the drone flight (cm) 16. eca: [numeric] exposed crown area calculated as the area of the crown polygon delineated in the orthomosaic (m2) 17. total_ca: [numeric] total crown area estimated from a crown area model (m2) 18. rcel: [numeric] relative crown exposure to light (m2) 19. time_flight_census3: [numeric] time in years from the drone flight date to the third census for that tree (yr)

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Refueling Infrastructure Deployment in Low-Income and Non-Urban Communities

The U.S. National Blueprint for Transportation Decarbonization identifies the need to invest in infrastructure supporting low- and zero-emission vehicles, especially in low-income and overburdened communities, to eliminate nearly all greenhouse gas emissions from the transportation sector by 2050. The alternative fuel vehicle refueling property tax credit (26 U.S. Code § 30C) includes eligibility criteria intended to encourage investment in underserved communities based on the economic characteristics or urban character of the census tract in which the fueling infrastructure is installed. Eligible census tracts are those that qualify for the New Markets Tax Credit or that are not located within urban areas as defined by the U.S. Census Bureau. This study quantifies how many fueling-related amenities are currently located in census tracts that qualify and do not qualify for the 30C tax credit based on IRS Notice 2024-20. For existing electric vehicle charging stations, 51% of Level 2 and 60% of Direct Current Fast Charging public stations are located in eligible census tracts. 73% of natural gas, propane, and hydrogen fueling stations are in qualifying census tracts and 75% of biodiesel and renewable fuel stations are in qualifying census tracts. This compares with 73% of existing gas stations in eligible census tracts. For deploying the refueling infrastructure to satisfy future demand, this study shows that truck stops (94%), commercial truck stops (92%), and Federal Highway alternative fuel corridors (89%) are predominantly located in eligible locations. Additionally, significant percentages of the population (62%), light-duty vehicle registrations (64%), and medium- and heavy-duty vehicle registrations (68%) fall within eligible areas.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2025

Initial Mobility Analysis for ORNL VA-EDH Synthetic Populations

Travel burdens are a major barrier to healthcare access among US Veteran patient populations, particularly those residing in rural areas. Spatial accessibility to points of care for US Veteran populations is commonly assessed in two ways. The first approach uses open data from the US Census to represent collective travel burdens, for example the distance between population-weighted census tract centroids and VHA points of care. The second approach uses restricted-access VHA patient data to measure travel costs (e.g., distance, time) for accessing points of care with respect to geolocated patient addresses and real or approximated transportation networks. While the advantage of the open data approach lies in its reproducibility, it has notable limitations in its tendency to infer individual travel behavior from aggregate population characteristics, a problem known as ecological fallacy. Conversely, while the patient data approach is able to account for individual travel behavior, its ability to account for localized access disparities (e.g., a neighborhood with exceptionally high transportation costs) and patient demographics is limited as protecting individual patient data requires their storage in closed systems with limited capacity for adequately modeling real-world travel patterns or for supplementing patient attributes. Additionally, the patient data approach cannot account for veterans who are not enrolled in the VHA system but who may be eligible for care. These challenges limit the ability to perform “what if” analyses on the effects of place-specific interventions on veteran populations with high access barriers to healthcare. To address these challenges, we explore the application of realistic synthetic populations to examine travel burdens and spatial accessibility issues among veteran patient populations. Synthetic populations provide a virtual, individually-resolved and cross-sectional representation of the veteran patient population that enables investigation of spatial access to points of care in ways in which aggregate data and patient data do not. First, synthetic populations allow one to directly assess how individuals access points of care, from synthesized residential locations to outpatient facilities on real-world transportation networks. Modeling access to points of care at the individual scale addresses the ecological fallacy problem associated with using aggregated census data to represent veteran populations and patterns of movement. Second, synthetic populations provide a means of completely representing an area’s veteran population using only publicly available, anonymized census microdata from the American Community Survey (ACS) to ensure the privacy of real-world individuals. Generating synthetic populations from the ACS also expands descriptive characteristics beyond what patient data typically offers to include socio-demographic, economic, housing, and mobility attributes. More detailed profiles of both VHA patient populations and veterans not enrolled in the VA system will provide a comprehensive picture of groups that may benefit from interventions or outreach. As an initial exercise for using synthetic populations to measure veteran travel burdens to VA care, we apply Oak Ridge National Laboratory’s (ORNL) UrbanPop capability to generate a series of synthetic VHA patient populations for 9 Veterans Integrated Services Networks (VISN) market areas in 9 Census Divisions across the continental United States, which are listed in Table 1. We use UrbanPop to produce synthetic populations for the VISN markets selected for each US Census Division, then assign VA outpatient clinic destinations to synthetic VHA patients based on travel about each VISN market’s road network. To demonstrate using the synthetic populations to evaluate healthcare travel burdens, we compare the time-based impedance between simulated home locations and VA outpatient clinics in each VISN market. We then perform validation exercises on the synthetic populations with respect to neighborhood (block group) demographic composition as well as patient mobility, comparing aggregate origin-destination statistics for the synthetic population to outpatient visits available in restricted patient data from the VA’s Corporate Data Warehouse (CDW) database.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

VA Determinants of Health Data Curation Documentation FY25-Q2

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Determinants of Health (EDH) project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, ‘standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

VA Determinants of Health Data Curation Documentation FY25-Q3

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

VA Community Determinants of Health Data Curation Documentation FY25-Q4

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Determinants of Health (EDH) project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

VA Community Determinants of Health Data Curation Documentation FY26-Q1

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Community Determinants of Health (EDH) Data project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, ‘standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Community Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2026

VA Community Determinants of Health Data Curation Documentation FY26-Q2

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Community Determinants of Health (EDH) Data project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1 km grid) to another (e.g., U.S. Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, U.S. Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1 km grids. Some economic data may only be available at the ZIP code level. In this context, ‘standardized’ means that all datasets share the same spatial extent (e.g., U.S. Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Community Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2026

Differences in urban plant community compositions across an urban-rural gradient in Knoxville, TN

Urban forests, or vegetation in areas under heavy human influence, provide many ecosystem services to urban residents such as localized cooling via evapotranspiration, shade, filtering of air pollution, and the associated health benefits of natural spaces. In order to quantify the magnitude of localized cooling by trees growing in varying levels of urbanization (based on % impervious surfaces, e.g., buildings, pavement), urban forest species composition, tree size, and tree density must be characterized. As a part of Oak Ridge National Laboratory’s (ORNL) urban forest temperature study, we conducted tree censuses in five Knoxville city parks where ORNL meteorological stations are deployed. Moreover, we measured every woody plant ≥ 5 cm diameter at breast height (DBH) within a 50 m radius of each site’s meteorological station for its DBH and species identification. When possible, individuals were identified down to species. Certain genera (Quercus spp., Carya spp., Pinus spp.) were identified down to genera in interest of time. Individual and total site basal area were calculated from measured DBH data. Results show notable differences in urban plant community compositions and total woody plant basal area across sites, with more urban sites closer to downtown (West View and SEEED) having lower tree basal area than the more suburban sites (West Hills, Cumberland Estates, and Victor Ashe). We identified 54 species across all sites, with West Hills and Victor Ashe having the highest species diversity. Our results show differences in forest compositions and sizes across Knoxville, which are currently informing ORNL’s evapotranspiration estimates for each site. Data Summary: Census data for West Hills (WH), Cumberland Estates (CE), Victor Ashe (VA), West View (WV), and Socially Equal Energy Efficient Development or SEEED (SD) urban forests in Knoxville, TN, USA, including tree size based on diameter at breast height (DBH; 1.3 m), species identification (Latin and common names), and basal area per stem (BA=π×[.5*DBH]^2). Field data are summarized in this file: “Community_Composition_Data.CSV”. Site-specific data detailing each site’s coordinates, number of stems measured at DBH, average tree DBH, α-diversity (number of species present), and total site basal area (sum of individual basal areas per site) are in this file: “Site_Comparisons.CSV”.

Warren, Jeffrey [ORNL] (ORCID:0000000206804697)↗

DOE OSTI2021

Datasets for DOE 2021 Communities LEAP Pilot

This submission offers data aligned to each of the four eligibility criteria outlined in the United States Department of Energy (DOE) 2021 Communities LEAP (Local Energy Action Program) Pilot. Please visit the LEAP website (https://www.energy.gov/communitiesLEAP/communities-leap) to learn more about LEAP and gain additional contextual information for how these data may be used. The data provided in the file approximates how the eligibility criteria apply at the census tract level across the United States (U.S.). The excel file available for download provides information pertaining to each of the four criteria outlined (average energy burden, percent low income, historic fossil energy communities) for all census tracts within the 50 U.S. States, the District of Columbia (D.C.), and Puerto Rico. The tabs within the excel file provide a file description, a summary data table (a simplified, easy to use presentation of the four eligibilities criteria), metadata (description, source, and other pertinent details for all variables provided), and a full, detailed data table. Please note that while these data are provided at the census tract level, census tracts do not necessarily have the same physical boundaries as a community but were used as they provide the closest proxy based on publicly available information collected using an empirically robust method. U.S. territories are not listed but are eligible to apply to Communities LEAP. As stated in the Opportunity Announcement, applying communities should describe how they meet the eligibility criteria in their application even if these data do not specifically show that they are eligible.

Communities↗

DOE OSTI2023

Datasets for DOE 2023 Communities LEAP

This data is aligned to eligibility criteria outlined in the United States Department of Energy (DOE) 2023 Communities LEAP (Local Energy Action Program). Please visit the LEAP website (https://www.energy.gov/communitiesLEAP/communities-leap) to learn more about LEAP and gain additional contextual information for how these data may be used. The data provided approximates how the eligibility criteria apply at the census tract level across the United States. This EDX submission provides access to information pertaining to each of the four eligibility criteria outlined (average energy burden, percent low income, communities with a historic economic dependence on fossil fuel industrial facilities, and disadvantaged communities) for all census tracts within the 50 U.S. States, the District of Columbia (D.C.), and Puerto Rico. This information can be access in a detailed excel spreadsheet or through the linked interactive web application (https://arcgis.netl.doe.gov/portal/apps/experiencebuilder/experience/?id=2a77f443d72b4a4d82474b3ffe33b8cd). Please note that while these data are provided at the census tract level, census tracts do not necessarily have the same physical boundaries as a community but were used as they provide the closest proxy based on publicly available information collected using an empirically robust method. U.S. territories are not listed but are eligible to apply to Communities LEAP. As stated in the Opportunity Announcement, applying communities should describe how they meet the eligibility criteria in their application even if these data do not specifically show that they are eligible.

2023↗

DOE OSTI2023

Organic Waste Resource Assessment for the Detroit Region

This study summarizes major sources of organic wastes in the Detroit region to (1) characterize target feedstock magnitudes and distribution in support of techno-economic analysis (TEA), and (2) guide the design of blended feedstock conversion experiments using hydrothermal liquefaction (HTL). Feedstocks considered in this review include municipal wastewater sludge solids (untreated) and scum; bulk municipal solid waste (MSW); the organic fraction of municipal solid waste (OF-MSW); residential food waste, non-residential food waste including institutional, industrial, and commercial (IIC) sources; confined animal manures (i.e., lactating dairy, feedlot beef, and market swine); waste fats, oils and greases (FOG); agricultural residues; forest residues. The scope of the investigation was limited to existing modeled or publicly available reporting datasets. Bulk MSW data were only collected for context and to generate estimates of OF-MSW by waste type and should not be included in total organic waste estimates. Because the TEA analysis boundary was not defined prior to conducting the resource assessment, the data are summarized within six spatial contexts (boundaries), including (1) city of Detroit (census); (2) Great Lakes Water Authority (GLWA) service area; “Tri-county” urban area (census); “Metro” Detroit-Warren-Dearborn Metropolitan Statistical Area (MSA) (census); Detroit-Warren-Ann Arbor Combined Statistical Area (CSA) (census); and the Michigan Councils of Government (COG) Region-1. All of the spatial contexts are entirely within the State of Michigan, and some overlap one another. A broader context could be developed to include data from surrounding states or Canada.

09 BIOMASS FUELS↗

DOE OSTI2022

Analyzing Relationships Between Economic and Neighborhood-Related Social Determinants of Health and Intensive Care Unit Length of Stay for Critically Ill Children With Medical Complexity Presenting With Severe Sepsis

Objectives: Of the Social Determinants of Health (SDoH), we evaluated socioeconomic and neighborhood-related factors which may affect children with medical complexity (CMC) admitted to a Pediatric Intensive Care Unit (PICU) in Shelby County, Tennessee with severe sepsis and their association with PICU length of stay (LOS). We hypothesized that census tract-level socioeconomic and neighborhood factors were associated with prolonged PICU LOS in CMC admitted with severe sepsis in the underserved community. Methods: This single-center retrospective observational study included CMC living in Shelby County, Tennessee admitted to the ICU with severe sepsis over an 18-month period. Severe sepsis CMC patients were identified using an existing algorithm incorporated into the electronic medical record at a freestanding children's hospital. SDoH information was collected and analyzed using patient records and publicly available census-tract level data, with ICU length of stay as the primary outcome. Results: 83 encounters representing 73 patients were included in the analysis. The median PICU LOS was 9.04 days (IQR 3.99–20.35). The population was 53% male with a median age of 4.1 years (IQR 1.96–12.02). There were 57 Black/African American patients (68.7%) and 85.5% had public insurance. Based on census tract-level data, about half (49.4%) of the CMC severe sepsis population lived in census tracts classified as suffering from high social vulnerability. There were no statistically significant relationships between any socioeconomic and neighborhood level factors and PICU LOS. Conclusion: Pediatric CMC severe sepsis patients admitted to the PICU do not have prolonged lengths of ICU stay related to socioeconomic and neighborhood-level SDoH at our center. A larger sample with the use of individual-level screening would need to be evaluated for associations between social determinants of health and PICU outcomes of these patients.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Biopower: Impact of Biofuels Deployment to Replace Petroleum Liquids in Stationary Power Applications

Petroleum-based liquids are used in a portion of power generation applications in the United States, predominantly in the New England, Middle Atlantic, South Atlantic, and Pacific-Noncontiguous regions. Power plants that burn petroleum liquids, such as distillate or residual fuel oils, are generally used for short periods to accommodate peak electricity demands. The Energy Information Administration (EIA) estimated the U.S. consumption of petroleum liquids for electricity generation at 27 million barrels in 2018, representing a cost of $2.4 billion annually. This study assesses the potential to displace all or part of the petroleum liquids in U.S. power generation with biofuels. The biofuels for this application are assumed to be derived from terrestrial feedstocks, with conversion routes of both fast pyrolysis (bio-oil) and hydrothermal liquefaction (bio-crude). Regional models were used to assess the availability and cost of three different base materials: clean wood, forest residues, and corn stover; each was evaluated in the laboratory at small or experimental scales for conversion to bio-oil or bio-crude. The estimated biofuel production quantities depend on equivalent heating versus the current heavy fuel. In this report, the availability of each type of biomass for each section of the U.S. Census division is estimated using a conservative broker price (in each case) of $ 80 per dry tonne. The results show that the petroleum-liquid power generation in each of the Census Divisions could be supplied by one or more of the feedstocks evaluated. For all regions, clean wood supplies (only) could provide ample supply. For all but two regions (Middle Atlantic and New England), forest residues alone are sufficient. Finally, for all regions but three (Middle Atlantic, New England, and South Atlantic), corn stover alone is adequate. The Minimum Fuel Selling Price (MFSP) of bio-oil and bio-crude were also estimated for each feedstock type and Census Division. This analysis showed that fast pyrolysis bio-oil projections to be lower (14% on average) than current wholesale petroleum-based heating oil prices in each of the regions, assuming 100 dry tonnes/day processing capacity. However, bio-crude predictions were significantly higher (2X) in all cases. The effect of biorefinery size was also quantified. Based on the preliminary results in this study, it is apparent the biofuels could be an economical alternative for current petroleum liquids in U.S. power generation. However, additional research is needed to determine the necessary biofuel characteristics to support existing generation equipment. It is recommended that both power generation and biofuel production stakeholders to be engaged to outline the research and testing needed to identify the technical hurdles to enable the opportunity.

02 PETROLEUM↗

DOE OSTI2023

Areal interpolation of population projections consistent with different SSPs from 1-km resolution to block level based on USA Structures dataset

Population data are normally collected at various census administrative levels, and areal interpolation of population is often required to transform population to the desired spatial resolution. Building footprint datasets, such as Microsoft building footprints, have proven to be useful in estimating population distribution and can therefore be used for areal interpolation of population. In addition to Microsoft building footprints, the recently released USA Structures dataset provides additional information such as building type and building height for some regions, which may provide valuable information for a better depiction of population distribution and improved population areal interpolation accuracy. In this study, we have conducted areal interpolation of population projections consistent with three different Shared Socioeconomic Pathways (SSP2, SSP3, and SSP5) from 1-km grid cells to block level in Washington state for every ten years from 2020 to 2040 based on USA Structures. We assessed USA Structures-based population downscaling accuracy using U.S. decennial survey data in 2020 under three different downscaling schemes, including population downscaling from census tracts to block groups, from census tracts to blocks, and from block groups to blocks. The resulting accuracies were compared with those based on Microsoft building footprints. The comparison showed that USA Structures achieved higher accuracies across different population density regions and areas with different urbanization extent within our study area.

99 GENERAL AND MISCELLANEOUS↗