SEARCH · Search NASA

Results for “cluster wakes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

54 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Mod-2 wind turbine field operations experience

The Mod-2 wind turbine is now in a 2-year research/experimental operations phase which offers a unique opportunity to study the effects of single and multiple wind turbines interacting with each other, the power grid, and the environment. This paper addresses the field operations and research testing experienced at the Mod-2 Cluster Goodnoe Hills Research Test Site near Goldendale, WA. Field operation, both routine and nonroutine, are discussed as well as the role of the participating utility. Technical areas discussed pertain to system performance and loads. Specific research tests relating to acoustics, TV interference, and wake effects are also discussed.

Gordon, L. H.↗

NASA NTRS1988

Flow Analysis of Space Shuttle Feed Line 17-inch Disconnect Valve

A steady incompressible three-dimensional viscous flow analysis has been conducted for the Space Shuttle External Tank/Orbiter propellant feed line disconnect flapper valves with upstream elbows. The full Navier-Stokes code, INS3D, is modified to handle interior obstacles. Grids are generated by SVTGD3D code. Two dimensional initial grids in the flow cross section with and without the flappers are improved by elliptic smoothing to provide better orthogonality, clustering and smoothness to the three dimensional grid. The flow solver is tested for stability and convergence in the presence of interior flappers. An under-relaxation scheme has been incorporated to improve the solution stability. Important flow characteristics such as secondary flows, recirculation, vortex and wake regions, and separated flows are observed. Computed values for forces, moments, and pressure drop are in satisfactory agreement with water flow test data covering a maximum tube Reynolds number of 3.5 x 10(exp 6). The results will serve as a guide to improved design and enhanced testing of the disconnect.

Kandula, Max↗

NASA NTRS1987

Space station group activities habitability module study: A synopsis

Space station habitability was studied by investigating crew activity routines, proximities, ergonomic envelopes, and group volumes. Ten alternative schematic interior designs were proposed. Preliminary conclusions include: (1) in-service interior modifications may be necessary and should be planned for; (2) design complexity will be increased if the module cluster is reduced from five to three; (3) the increased crew circulation attendant upon enhancement of space station activity may produce human traffic bottlenecks and should be planned for; (4) a single- or two-person quiet area may be desirable to provide crew members with needed solitude during waking hours; and (5) the decision to choose a two-shift or three-shift daily cycle will have a significant impact on the design configuration and operational efficiency of the human habitat.

Nixon, David↗

NASA NTRS1993

A numerical investigation of a subsonic jet in a crossflow

The flowfield induced by a single, subsonic jet exhausting perpendicularly from a flat plate into a subsonic crossflow has been numerically investigated. The test case was chosen to match available experimental data where the jet Mach number was 0.78, and the freestream Mach number was 0.13. Time-averaged solutions were obtained using the thin-layer Navier-Stokes equations and two overlapping grids. The solutions were sensitive to the radial grid clustering near the edge of the jet and to the far-field boundary conditions. Experimental data comparisons were required to determine the most appropriate jet grid and satisfactory boundary conditions. Globally, the solutions converged in about 6000 iterations. The computational results accurately showed the deflected jet and associated contrarotating vortices. The fine clustered grid in the region upstream of the jet exit allowed the horseshoe vortex in the boundary layer near the jet exit to be captured. Most importantly for aircraft applications, the computed plate pressure distributions compared favorably with the experimental data over most of the surface. However, in the wake region immediately downstream of the jet exit, where there is extensive flow separation, some discrepancies with experimental data were observed. Two turbulence models were used in this study: (1) the zero-equation, two layer Baldwin-Lomax turbulence model; and (2) one-equation Baldwin-Barth turbulence model. The turbulence models gave results which generally compared no better with experimental data than the laminar computation results.

Chiu, Stephen H.↗

DOE OSTI2022

WPGNN and PLayGen (Wind Plant Graph Neural Network and Plant Layout Generator) [SWR-21-90]

WPGNN is the graph neural network machine learning based surrogate model and software that provides a streamlined approximation of wind plant wake models. It can rapidly estimate the energy production of the plant and turbines for any arbitrarily sized wind plant and layout under any inflow condition. Associated tools include graphing and visualization capabilities as well as a wind plant generator capable of creating randomized realizations of canonical wind plant layouts. The WPGNN architecture and application is extendable to multiple wake models, turbine technologies and features, and supports downstream optimizations of wind plant layouts and control strategies. In addition to the WPGNN, we include the code for the plant layout generator (PLayGen) playgen.py. This generator can produce random realizations of realistic wind plant layouts from one of the four canonical styles: cluster, single string, multiple string, or parallel string. The PLayGen_demo.ipynb notebook provides a demonstration of how to use the generator tool.

Harrison-Atlas, Dylan↗

NASA NTRS1975

Detection of severe storms by satellites

Ideas are presented for severe storm identification based on satellite data. The tops of huge thunderstorms in satellite pictures often appear as vast areas of extensive cirrus cloud; they consist of clusters of anvil clouds, each generated by vigorous thunderstorm circulation. The overshooting tops observed in satellite pictures are located where the subanvil updrafts are the strongest. Learjet experiment results show that an overshooting top varies either quickly or slowly, depending on the characteristics of individual clouds. When an overshooting top collapses, a small segment of the anvil cirrus jumps upward in the wake of the overshooting top. Also discussed is the monitoring of vertical motions from satellites and tornado-producing thunderstorms from geostationary altitude. A very high-resolution imagery of both infrared and visual spectral bands makes it possible to infer vertical motions beneath the anvil top. A combination of cloud velocity and anvil expansion rate will permit, in the future, determining the location of severe storms within the vast areas of anvil clouds.

Fujita, T. T.↗

NASA NTRS1985

Mod-2 wind turbine field operations experiment

The three-machine, 7.5 MW Goodnoe Hills located near Goldendale, Washington and is now in a research/experimental operations phase that offers a unique opportunity to study the effects of single and multiple wind turbines interacting with each other, the power grid; and the environment. Following a brief description of the turbine and project history, this paper addresses major problem areas and research and development test results. Field operations, both routine and nonroutine, are discussed. Routine operation to date has produced over 13,379,000 KWh of electrical energy during 11,064 hr of rotation. Nonroutine operation includes suspended activities caused by a crack in the low speed shaft that necessitated a redesign and reinstallation of this assembly on all three turbines. With the world's largest cluster back in full operation, two of the turbines will be operated over the next years to determine their value as energy producer. The third unit will be used primarily for conducting research tests requiring configuration changes to better understand the wind turbine technology. Technical areas summarized pertain to system performance and enhancements. Specific research tests relating to acoustics, TV interference, and wake effects conclude the paper.

Gordon, L. H.↗

NASA NTRS1996

Rayleigh scattering measurements in supersonic facilities

Using a narrow-band, pulsed, ArF excimer laser and a single-intensified CCD camera, planar laser Rayleigh scattering measurements were performed to obtain quantitative density measurements both in the free stream and in a model flow field. These measurements were conducted in the 15-inch, Mach 6 high temperature facility at NASA Langley Research Center. This facility is capable of achieving stagnation temperatures up to 700 K (800 F) over a range of stagnation pressures from 0.35 to 2.07 MPa (50 to 300 psia). The high temperature capability of this facility eliminates the clustering effect observed in earlier Mach 6 studies, and allows quantitative density measurements in the free stream over a range of stagnation pressures from 0.35 to 1.75 MPa (50 to 250 psia). Model flow field measurements were obtained on 38.1 mm diameter cylinder. Measurement locations include the free stream, the region behind the bow shock in front of the model, and the region behind the model including the wake. The densities deduced from the Rayleigh scattering measurements in the model flow field are compared with CFD computations. Measurement uncertainties and the detection limit are discussed.

Shirinzadeh, B.↗

DOE OSTI2020

Microstructure effects on fatigue crack growth in additively manufactured Ti–6Al–4V

In this article we investigate the relationship between the different microstructural features in additively-manufactured (AM) Direct Metal Laser Deposited Ti–6Al–4V alloys and the observed fatigue and fracture behaviors, using high resolution Digital Image Correlation experiments and microstructural imaging. Fatigue cracks in the AM specimens were observed to periodically propagate parallel to the α' laths and deflect at prior β grain boundaries. Corresponding plastic strain distributions show needle-like regions of high strain that correlated to the α' laths, suggesting significant influence of the microstructure on the plastic zone. In many cases, the fatigue cracks also propagated towards voids from unsintered powder or gas entrapment in the vicinity. In several experiments, premature failure of the AM specimens occurred under monotonic fracture or cyclic fatigue loading, which we attribute to the presence of void clusters located near the crack-tip. These fatigue and fracture characteristics were similar for AM specimens of different build-orientations.

36 MATERIALS SCIENCE↗

NASA NTRS1988

The morphology of multiple-nucleus brightest cluster galaxies

The morphology of high SNR CCD images of 16 multiple-nucleus brightest cluster galaxies is studied using an algorithm that models images of the systems as the line-of-sight superposition of normal elliptical galaxies. The algorithm is applied initially to the classic multiple-nucleus cD galaxy in A2199. Evidence is found suggestive of deep interpenetrating high-speed encounters by its secondaries. The interactions effects studied include noncentric isophotes, brightness profile effects, excess light around primary galaxies, and dynamical friction wakes. The results show that in many cases multiple systems are interacting systems.

Lauer, Tod R.↗

DOE OSTI2025

Investigating the relationship between simulation parameters and flow variables in simulating atmospheric gravity waves for wind energy applications

Wind farms, particularly offshore clusters, are becoming larger than ever before. Besides influencing the surface wind flow and the inflow for downstream wind farms, large wind farms can trigger atmospheric gravity waves in the inversion layer and the free atmosphere aloft. Wind-farm-induced gravity waves can cause adverse pressure gradients upstream of the wind farm, which contribute to the global blockage effect, and can induce favorable pressure gradients above and downstream of the wind farm that enhance wake recovery. Numerical modeling is a powerful means of studying these wind-farm-induced atmospheric gravity waves, but it comes with the challenge of handling spurious reflections of these waves from domain boundaries. Typically, approaches which employ radiation boundary conditions and forcing zones are used to avoid these reflections. However, the simulation setup of these approaches relies heavily on ad hoc processes. For instance, the widely used Rayleigh damping method requires ad hoc tuning to produce a setup that may only produce satisfactory results for a particular case. To provide more systematic guidance on setting up realistic simulations of atmospheric gravity waves, we conduct a large-eddy simulation (LES) study of flow over a 2D hill and through a wind farm canopy that explores the optimum domain size and damping layer setup depending on the fundamental parameters which determine the flow characteristics. In this work, we only consider linearly stratified conditions (i.e., no inversion layer), thereby focusing on internal gravity waves in the free atmosphere and their reflections from the domain boundaries. This type of flow is governed by a single Froude number, which dictates most of the internal wave properties, such as wavelength, amplitude, and direction. This, in turn, will dictate the optimum domain size and Rayleigh damping layer setup. We find the effective horizontal and vertical wavelengths (the representative wavelengths of the entire wave spectrum) to be the appropriate length scales to size the domain and damping layer thickness, and the optimal Rayleigh damping coefficient scales with the Brunt–Väisälä frequency. Considering Froude numbers seen in wind farm applications, we propose recommendations to limit the reflections to less than 10 % of the total upward-propagating wave energy. Typically, damping is done at the top boundary, but given the non-periodic lateral boundary conditions of practical wind farm simulation domains, we find that damping the inflow–outflow boundaries is of equal importance to damping the top boundary. The Brunt–Väisälä frequency-normalized damping coefficient should be between 1 and 10. The damping layer thickness should be at least one effective vertical wavelength; damping layers exceeding 1.5 times the vertical wavelength are found to be unnecessary. The domain length and height should accommodate at least one effective horizontal and vertical wavelength, respectively. Moreover, Rayleigh damping does not damp the waves completely, and the non-damped energy might accumulate over the simulation time.

17 WIND ENERGY↗

DOE OSTI2024

Dust and Ions: Self Organization and Stability (Final Report)

This project explores the stability and structure of systems with non-reciprocal interactions, challenging the traditional understanding based on Newton's third law, which states that every action has an equal and opposite reaction. Reciprocal forces are fundamental to the stability of systems ranging in size from atomic nuclei to galactic clusters. Our research investigates what happens when the forces between two objects are not equal and opposite. We used dusty plasmas as a model system to study non-reciprocal interactions. In a plasma chamber, micron-sized dust particles acquire a negative charge and form 2D planar "dust crystals" when levitated by the electric field present in the plasma sheath at the interface between the plasma and the lower surface of the chamber. This electric field also drives a vertical ion flow, creating a positively charged "plasma wake" downstream of the dust grains. While horizontally aligned dust grains interact reciprocally, a slight vertical displacement causes non-reciprocal interactions due to the attraction of the lower dust grain to the upper dust grain’s ion wake. Our experiments investigated the range of plasma conditions (gas pressure and system power) where stable dusty plasma structures are able to self-organize, aided by the ion wake. We studied systems ranging from pairs of dust particles to large 2D crystals, providing insights into the conditions that lead to stable or unstable structures. We used numerical simulations to investigate how ion wakes changed in response to changes in the operating conditions as well as how the wakes of separate grains interact when dust grains are in close proximity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Randomized Algorithms for Symmetric Nonnegative Matrix Factorization

Symmetric Nonnegative Matrix Factorization (SymNMF) is a technique in data analysis and machine learning that approximates a matrix with a product of a nonnegative, low-rank matrix and it transpose. To design faster and more scalable algorithms for SymNMF we develop two randomized algorithms for its computation. The first method uses randomized matrix sketching to compute an initial low-rank approximation to the input matrix and proceeds to uses this as a low-rank input to rapidly compute a SymNMF. The second methods uses randomized leverage score sampling to approximately solve constrained least squares problems. Many successful methods for SymNMF rely on (approximately) solving sequences of constrained least squares problems. Here, we prove theoretically that leverage score sampling can approximately solve constrained least squares problems to e-accuracy. Finally we demonstrate both methods work in practice by applying them to graph clustering tasks on large real world data sets. These experiments show that our methods approximately maintain solution quality and achieve significant speed ups for both large dense and large sparse problems.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1992

Fractals and cosmological large-scale structure

Observations of galaxy-galaxy and cluster-cluster correlations as well as other large-scale structure can be fit with a 'limited' fractal with dimension D of about 1.2. This is not a 'pure' fractal out to the horizon: the distribution shifts from power law to random behavior at some large scale. If the observed patterns and structures are formed through an aggregation growth process, the fractal dimension D can serve as an interesting constraint on the properties of the stochastic motion responsible for limiting the fractal structure. In particular, it is found that the observed fractal should have grown from two-dimensional sheetlike objects such as pancakes, domain walls, or string wakes. This result is generic and does not depend on the details of the growth process.

Luo, Xiaochun↗

NASA NTRS1971

Studies of positive-ion composition in the equatorial D-region ionosphere.

Evaluation of two daytime D-region positive-ion composition measurements performed at Thumba, India, for solar zenith angles of 53.2 and 27.8 deg. Comparison of upleg ram with downleg wake data shows a large increase in the concentration of heavy ions 48(+), NO(+) . H2O; 55(+), H3O(+) . (H2O)2; and M(+) greater than 65(+) for the downleg reduced shock condition. Peak concentrations of 48(+) and 55(+) occur at unit optical depth for Lyman alpha radiation. The ion 37(+), H3O(+) . H2O, is dominant for chi = 27.8 deg, but not for chi = 53.2 deg, consistent above 80 km with an origin from the X-ray production of O2(+). Laboratory measurements have shown that the ion, NO(+), can be transferred to heavy hydrates 48(+), 55(+), and M(+) greater than 65(+) by a reaction chain starting with NO(+) + X + M = NO(+) . X + M, where X can be O2, N2, CO2 or a combination of all three, depending on the rate of reaction. This chain, together with a similar reaction scheme starting with O2(+) and ending in 19(+), 37(+), and heavier clusters, is used to provide a consistent explanation for the hydrated ions observed in the D region.

Goldberg, R. A.↗

DOE OSTI2020

Resilient Autonomous Wind Farms: Preprint

With the advent of an increasing number of control strategies that seek to optimize wind turbine performance on a farm-level, taking account of individual wind turbine information to achieve wind farm-level objectives has become an increasingly important goal. Methods for controlling wind turbines on an individual and farm level have seen significant development, and an abundance of new implementations for gathering and using data from turbines have created potential for novel control mechanisms which can further optimize the performance and delivery characteristics of a wind farm. A key element of making these wind farms more efficient is to develop reliable algorithms that use local sensor information that is already being collected, such as supervisory control and data acquisition (SCADA) data, local meteorological stations, and nearby radars/sodars/lidars. Making use of information from all wind turbines in a wind farm can enable such approaches as determining the atmospheric conditions across the farm, improving fault-finding, and enabling more efficient overall control of farm-wide optimizations through mechanisms such as wake-steering. However, these approaches typically involve a centralized communications and control center. In order to ensure the resilient operation of the farm, it is necessary to develop an approach which distributes the calculation and communication amongst multiple nodes throughout the farm. In this fashion, a redundant, robust, and secure network can be created, which can tolerate faults in calculation, communication, and even external attacks which seek to disrupt the operation of the wind farm. This paper introduces the use of the Raft Byzantine Fault Tolerance algorithm in the implementation of autonomous control of a wind farm. This implementation will allow for fault tolerance for malfunctioning nodes, sensors, transmitters, and connectors. This approach is equally extensible to account for malicious actors. It will be shown to achieve overall consensus, provided the number of faults/malicious nodes is less than 3$n$+1, where $n$ is the number of turbine cluster faults which may occur, and to be robust in the face of multiple arbitrary faults.

autonomous↗

NASA NTRS1989

Numerical simulation of rotorcraft

The objective of the research is to develop and validate accurate, user-oriented viscous CFD codes (with inviscid options) for three-dimensional, unsteady aerodynamic flows about arbitrary rotorcraft configurations. Unsteady, three-dimensional Euler and Navier-Stokes codes are developed, adapted, and extended to rotor-body combinations. Flow solvers are coupled with zonal grid topologies, including rotating and nonrotating blocks. Special grid clustering and wave-fitting techniques were developed to capture low-level radiating acoustic waves. Significant progress was made in computing the propagation of acoustic waves due to the interaction of a concentrated vortex and a helicopter airfoil. The need for higher-order schemes was firmly established in relatively inexpensive two-dimensional calculations. In three dimensions, the number of grid points required to capture the low-level acoustic waves becomes very large, so that large supercomputer memory becomes essential. Good agreement was obtained between the numerical results obtained with a thin-layer Navier-Stokes code and experimental data from a model rotor. In addition, several nonrotating configurations that are sometimes proposed to simulate rotor blade tips in conventional wind tunnels were examined, and the complex flow around the radical tip shape of the world's fastest helicopter is under investigation. These studies demonstrate the flexibility and power of CFD to gain physical insight, study novel ideas, and examine various possibilities that might be difficult or impossible to set up in physical experiments. As a prelude to studies of rotor-body aerodynamic interactions, a preliminary grid topology and moving-interface strategy were developed. A new Euler/Navier-Stokes code using these techniques computes the vortical wake directly, rather than modeling it, as in most previous rotorcraft studies. Several hover cases were run for conventional and advanced-geometry blades. Numerical schemes using multi-zones and/or adaptive grids appear to be necessary to simulate the complex vortical flows in rotor wakes.

Mccroskey, William J.↗

NASA NTRS2012

Information Systems Coordinate Emergency Management

The rescue crews have been searching for the woman for nearly a week. Hurricane Katrina devastated Hancock County, the southernmost point in Mississippi, and the woman had stayed through the storm in her beach house. There is little hope of finding her alive; the search teams know she is gone because the house is gone. Late at night in the art classroom of the school that is serving as the county s emergency operations center, Craig Harvey is discussing the search with the center s commander. Harvey is the Chief Operating Officer of a unique company called NVision Solutions Inc., based at NASA s Stennis Space Center in Bay St. Louis, only a couple of miles away. He and his entire staff have set up a volunteer operation in the art room, supporting the emergency management efforts using technology and capabilities the company developed through its NASA partnerships. As he talks to the commander, Harvey feels an idea taking shape that might lead them to the woman s location. Working with surface elevation data and hydrological principles, Harvey creates a map showing how the floodwaters from the storm would have flowed along the topography of the region around the woman s former home. Using the map, search crews find the woman s body in 15 minutes. Recovering individuals who have been lost is a sad reality of emergency management in the wake of a disaster like Hurricane Katrina in 2005. But the sooner answers can be provided, the sooner a community s overall recovery can take place. When damage is extensive, resources are scattered, and people are in dire need of food, shelter, and medical assistance, the speed and efficiency of emergency operations can be the key to limiting the impact of a disaster and speeding the process of recovery. And a key to quick and effective emergency planning and response is geographic information. With a host of Earth-observing satellites orbiting the globe at all times, NASA generates an unmatched wealth of data about our ever-changing planet. This information can be captured, analyzed, and visualized by geographic information systems (GIS) to produce maps, charts, and other tools that can reveal information essential to a wide variety of applications including emergency management. Knowing precise, real-time information about the size, location, environmental conditions, and resulting damage of an event like a flood or wildfire as well as the location and numbers of emergency responders and other resources contributes directly to the effectiveness of disaster mitigation. The need for such information is also evident when responding to homeland security threats, such as a terrorist attack. Recognizing the value of its geospatial information resources for this and other purposes, in 1998 Stennis and the state of Mississippi partnered to form what became the Enterprise for Innovative Geospatial Solutions (EIGS) industry cluster, supporting the growth of remote sensing and GIS-based research and business. As part of EIGS, several companies partnered with NASA through dual use and Small Business Innovation Research (SBIR) contracts. Among those was NVision.

Source record↗