Search NASA⌕ Search

SEARCH · Search NASA

Results for “cobalt complex”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Aqueous-soluble bipyridine cobalt($\tiny{II}$/$\tiny{III}$) complexes act as direct redox mediators in photosystem I-based biophotovoltaic devices

Sustainable energy production is critical for meeting growing worldwide energy demands. Due to its stability and reduction potential, photosystem I (PSI) is attractive as the photosensitizer in biophotovoltaic devices. Herein, we characterize aqueous and organic solvent soluble synthetic bipyridine-based cobalt complexes as redox mediators for PSI-based biophotovoltaics applications. Cobalt-based complexes are not destructive to protein and have appropriate midpoint potentials for electron donation to PSI. We report on PSI stability in organic solvents commonly used in biophotovoltaics. We also show the effects of a mixed organic solvent phase on PSI reduction kinetics, slowing reduction rates approximately 8–38 fold as compared to fully aqueous systems, with implications for dye regeneration rates in PSI-based biophotovoltaics. Further, we show evidence of direct electron transfer from cobalt complexes to PSI. Finally, we report on photocurrent generation from Co mediator-PSI biophotovoltaic devices. Taken together, we discuss the development of novel Co complexes and our ability to fine-tune their characteristics via functional groups and counteranion choice to drive interaction with a biological electron acceptor on multiple levels from redox midpoints, spectral overlap, and solvent requirements, among others. This work suggests that fine-tuning of redox active species for interaction with a biological partner is possible for the creation and improvement of low cost, carbon-neutral energy production in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Pendent Relay Enhances H 2 O 2 Selectivity during Dioxygen Reduction Mediated by Bipyridine-Based Co–N 2 O 2 Complexes

Generally, cobalt–N 2 O 2 complexes show selectivity for hydrogen peroxide during electrochemical dioxygen (O 2 ) reduction. We recently reported a Co(III)–N 2 O 2 complex with a 2,2'-bipyridine-based ligand backbone which showed alternative selectivity: H 2 O was observed as the primary reduction product from O 2 (71 ± 5%) with decamethylferrocene as a chemical reductant and acetic acid as a proton donor in methanol solution. We hypothesized that the key selectivity difference in this case arises in part from increased favorability of protonation at the distal O position of the key intermediate Co(III)–hydroperoxide species. To interrogate this hypothesis, in this study we have prepared a new Co(III) compound that contains pendent –OMe groups poised to direct protonation toward the proximal O atom of this hydroperoxo intermediate. Mechanistic studies in acetonitrile (MeCN) solution reveal two regimes are possible in the catalytic response, dependent on added acid strength and the presence of the pendent proton donor relay. In the presence of stronger acids, the activity of the complex containing pendent relays becomes O 2 dependent, implying a shift to Co(III)–superoxide protonation as the rate-determining step. Interestingly, the inclusion of the relay results in primarily H 2 O 2 production in MeCN, despite minimal difference between the standard reduction potentials of the three complexes tested. EPR spectroscopic studies indicate the formation of Co(III)–superoxide species in the presence of exogenous base, with greater O 2 reactivity observed in the presence of the pendent –OMe groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hydrogen Evolution Mediated by Cobalt Diimine‐Dioxime Complexes: Insights into the Role of the Ligand Acid/Base Functionalities.

Abstract The benchmarking of the performance for H 2 evolution of cobalt diimine‐dioxime catalysts is provided based on a comprehensive study of their catalytic mechanism. The latter follows an ECE'CC pathway with intermediate formation of a Co(II)‐hydride intermediate and second protonation possibly at a basic site of the ligand, acting as a proton relay. This suggests an intramolecular coupling between the hydride and protonated ligand as the proton concentration‐independent rate‐determining step controlling the turnover frequency for H 2 evolution.

Sun, Dongyue↗
DOE OSTI2024

Tuning the Spin Transition and Carrier Type in Rare-Earth Cobaltates via Compositional Complexity

There is growing interest in material candidates with properties that can be engineered beyond traditional design limits. Compositionally complex oxides (CCO), often called high entropy oxides, are excellent candidates, wherein a lattice site shares more than four cations, forming single-phase solid solutions with unique properties. However, the nature of compositional complexity in dictating properties remains unclear, with characteristics that are difficult to calculate from first principles. Here, in this study, compositional complexity is demonstrated as a tunable parameter in a spin-transition oxide semiconductor La 1- x (Nd, Sm, Gd, Y) x/4 CoO 3 , by varying the population x of rare earth cations over 0.00≤ x≤ 0.80. Across the series, increasing complexity is revealed to systematically improve crystallinity, increase the amount of electron versus hole carriers, and tune the spin transition temperature and on-off ratio. At high a population (x = 0.8), Seebeck measurements indicate a crossover from hole-majority to electron-majority conduction without the introduction of conventional electron donors, and tunable complexity is proposed as new method to dope semiconductors. First principles calculations combined with angle resolved photoemission reveal an unconventional doping mechanism of lattice distortions leading to asymmetric hole localization over electrons. Thus, tunable complexity is demonstrated as a facile knob to improve crystallinity, tune electronic transitions, and to dope semiconductors beyond traditional means.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evidence of dynamical effects and critical field in a cobalt spin crossover complex

The [Co(SQ) 2 (4-CN-py) 2 ] complex exhibits dynamical effects over a wide range of temperature. Additionally, the orbital moment, determined by X-ray magnetic circular dichroism (XMCD) with decreasing applied magnetic field, indicates a nonzero critical field for net alignment of magnetic moments, an effect not seen with the spin moment of [Co(SQ) 2 (4-CN-py) 2 ].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Substituents effects on the electrocatalytic CO 2 reduction by cobalt corroles in solution

Electrochemical CO 2 reduction catalysis with cobalt corrole complexes in solution is reported. Corroles have attracted attention as contracted and trianionic tetrapyrrolic macrocycles that can be compared to leading porphyrin catalysts for CO 2 reduction, but most studies focus on heterogenized systems with poorly defined electrochemical responses. Electrochemical studies of cobalt corroles bearing axial triphenylphosphine ligands to ensure solubility are reported. The voltammetry provides mechanistic insights supporting CO 2 activation after the formal Co II /Co I reduction. The series of cobalt complexes, including a newly designed corrole with mixed perfluorophenyl/ortho-dimethoxyphenyl substituent pattern, provide evidence for electron-rich catalysts having stronger interactions with CO 2 . The primary product of CO 2 reduction is CO, formed at a rate of ca. 90 s −1 .

Kumar, Sachin [Technion–Israel Institute of Techno↗
DOE OSTI2020

Kinetic and substrate complex characterization of RamA, a corrinoid protein reductive activase from Methanosarcina barkeri

ABSTRACT In microbial corrinoid-dependent methyltransferase systems, adventitious Co(I)-corrinoid oxidation halts catalysis and necessitates repair by ATP-dependent reductive activases. RamA, an activase with a C-terminal ferredoxin domain with two [4Fe-4S] clusters from methanogenic archaea, has been far less studied than the bacterial activases bearing an N-terminal ferredoxin domain with one [2Fe-2S] cluster. These differences suggest RamA might prove to have other distinctive characteristics. Here, we examine RamA kinetics and the stoichiometry of the corrinoid protein:RamA complex. Like bacterial activases, K+ stimulates RamA. Potassium stimulation had been questioned due to differences in the primary structure of bacterial and methanogen activases. Unlike one bacterial activase, ATP is not inhibitory allowing the first determination of apparent kinetic parameters for any corrinoid activase. Unlike bacterial activases, a single RamA monomer complexes a single corrinoid protein monomer. Alanine replacement of a RamA serine residue corresponding to the serine of one bacterial activase which ligates the corrinoid cobalt during complex formation led to only moderate changes in the kinetics of RamA. These results reveal new differences in the two types of corrinoid activases, and provide direct evidence for the proposal that corrinoid activases act as catalytic monomers, unlike other enzymes that couple ATP hydrolysis to difficult reductions.

Microbiology↗
NASA NTRS1986

Cobalt Ions Improve the Strength of Epoxy Resins

Technique developed for improving mechanical strength of epoxy resins by adding cobalt ions in form of tris(acetylacetonato)cobalt (III) complex. Solid cast disks prepared from cobalt ion-containing epoxy resins tested for flexural strength and stiffness. Incorporation of cobalt ions into epoxies increased flexural strength of resins by 10 to 95 percent. Suitable resins for this technique include any liquid or solid TGMDA resins. Improved epoxy formulation proves useful as composite matrix resin, adhesive, or casting resin for applications on commercial and advanced aircraft.

Stoakley, D. M.↗
DOE OSTI2023

Exploiting the Marcus inverted region for first-row transition metal–based photoredox catalysis

Second- and third-row transition metal complexes are widely employed in photocatalysis, whereas earth-abundant first-row transition metals have found only limited use because of the prohibitively fast decay of their excited states. Here we report an unforeseen reactivity mode for productive photocatalysis that uses cobalt polypyridyl complexes as photocatalysts by exploiting Marcus inverted region behavior that couples increases in excited-state energies with increased excited-state lifetimes. These cobalt (III) complexes can engage in bimolecular reactivity by virtue of their strong redox potentials and sufficiently long excited-state lifetimes, catalyzing oxidative C(sp 2 )–N coupling of aryl amides with challenging sterically hindered aryl boronic acids. More generally, the results imply that chromophores can be designed to increase excited-state lifetimes while simultaneously increasing excited-state energies, providing a pathway for the use of relatively abundant metals as photoredox catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanism-Guided Kinetic Analysis of Electrocatalytic Proton Reduction Mediated by a Cobalt Catalyst Bearing a Pendant Basic Site

Cobalt polypyridyl complexes stand out as efficient catalysts for electrochemical proton reduction, but investigations into their operating mechanisms, with broad-reaching implications in catalyst design, have been limited. Herein, we investigate the catalytic activity of a cobalt(II) polypyridyl complex bearing a pendant pyridyl base with a series of organic acids spanning 20 pKa units in acetonitrile. Structural analysis, as well as electrochemical studies, reveals that the Co(III) hydride intermediate is formed through reduction of the Co(II) catalyst followed by direct metal protonation in the initial EC step despite the presence of the pendant base, which is commonly thought of as a more kinetically accessible protonation site. Protonation of the pendant base occurs after the Co(III) hydride intermediate is further reduced in the overall ECEC pathway. Additionally, when the acid used is sufficiently strong, the Co(II) catalyst can be protonated, and the Co(III) hydride can react directly with acid to release H 2 . With thorough mechanistic understanding, the appropriate electroanalytical methods were identified to extract rate constants for the elementary steps over a range of conditions. Thermodynamic square schemes relating catalytic intermediates proposed in the three electrocatalytic HER mechanisms were constructed. Furthermore, these findings reveal a full description of the HER electrocatalysis mediated by this molecular system and provide insights into strategies to improve synthetic fuel-forming catalysts operative through metal hydride intermediates.

08 HYDROGEN↗
DOE OSTI2021

Light-driven hydrogen production with CdSe quantum dots and a cobalt glutathione catalyst

A photocatalytic hydrogen (H 2 ) production system is reported using glutathione (GSH)-capped CdSe QDs with a cobalt precatalyst, yielding 130 000 mol H 2 per mol cobalt over 48 hours. Analysis of the reaction mixtures after catalysis indicates that the active catalyst is a labile complex of cobalt and GSH formed in situ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Characterizing cobalt sequestration in manganese-rich coal mine drainage treatment solids

This study investigates Co adsorption on synthesized birnessites over a wide pH range and in sulfate-rich solution to simulate CMD treatment conditions. Langmuir and Freundlich adsorption isotherms of Co at pH values of 3.5, 4.5, and 6.5 at 25°C onto Na-and H-birnessite were generated. Cobalt concentrations in supernatants were determined by ICP-MS and chelation ion chromatography. Mineralogy and morphology of pre- and post-adsorption experiment solids characterization by X-ray diffraction and scanning electron microscopy will be presented. These experiments suggest that cobalt sulfate complexes and pH of CMD, as well as the Mn-oxide mineral structures present in treatment beds, will impact cobalt adsorption in CMD solids, and can be used as calibration points for equilibrium and kinetic modeling approaches that are critical for developing effective and implementable remediation processes and to better inform future Co recovery efforts from CMD solids.

Schaffer, Camille↗
DOE OSTI2021

Selective cobalt and nickel electrodeposition for lithium-ion battery recycling through integrated electrolyte and interface control

Abstract Molecularly-selective metal separations are key to sustainable recycling of Li-ion battery electrodes. However, metals with close reduction potentials present a fundamental challenge for selective electrodeposition, especially for critical elements such as cobalt and nickel. Here, we demonstrate the synergistic combination of electrolyte control and interfacial design to achieve molecular selectivity for cobalt and nickel during potential-dependent electrodeposition. Concentrated chloride allows for the speciation control via distinct formation of anionic cobalt chloride complex (CoCl 4 2- ), while maintaining nickel in the cationic form ([Ni(H 2 O) 5 Cl] + ). Furthermore, functionalizing electrodes with a positively charged polyelectrolyte (i.e., poly(diallyldimethylammonium) chloride) changes the mobility of CoCl 4 2- by electrostatic stabilization, which tunes cobalt selectivity depending on the polyelectrolyte loading. This strategy is applied for the multicomponent metal recovery from commercially-sourced lithium nickel manganese cobalt oxide electrodes. We report a final purity of 96.4 ± 3.1% and 94.1 ± 2.3% for cobalt and nickel, respectively. Based on a technoeconomic analysis, we identify the limiting costs arising from the background electrolyte, and provide a promising outlook of selective electrodeposition as an efficient separation approach for battery recycling.

36 MATERIALS SCIENCE↗