Search NASA⌕ Search

SEARCH · Search NASA

Results for “compensation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Three-Phase LCC-LCC Compensated 50-kW Wireless Charging System with Non-Zero Interphase Coupling

In this paper, an LCC-LCC compensated 50 kW 3phase (3φ) wireless charging system with nonzero interphase mutual inductance is demonstrated. The 3φ-LCC compensation is designed considering a nonzero mutual-inductance among the phase-coils to meet resonance criteria, balance voltages and currents of the resonant tank components, achieve desired voltage gain, and ensure the zero-voltage switching (ZVS) operation. An experimental prototype of the 3φ-LCC-LCC compensation circuit is built for a 50 kW bipolar coil-based 3φ wireless charging system. The prototype system was tested at rated 50 kW power for evaluating the efficiency, ZVS operation, electric and magnetic field emissions, and thermal characteristics. The experimental results show 94.3% dc-to-dc efficiency and only 4.4 μT rms magnetic field emission at the rated 50 kW output power.

Mohammad, Mostak↗
DOE OSTI2021

The Sensitivity Analysis of Coil Misalignment for a 200-kW Dynamic Wireless Power Transfer System with an LCC-S and LCC-P Compensation

The dynamic wireless power transfer systems may reduce the battery size of electric vehicles while maintaining the travel range. Similar to the stationary wireless power transfer systems, the compensation networks are desired in dynamic wireless charging systems at the primary and secondary sides to reduce the reactive power requirement from the source and improve the efficiency. Consequently, it is essential to understand the behavior of the compensation networks, especially the sensitivity to misalignments. This paper presents a sensitivity analysis of LCC-S and LCC-P compensation networks for a 200-kW power transfer with variations in the coupling coefficient due to the electric vehicle travel and misalignments between the pads. The sensitivity study combines the electromagnetic finite element analysis and circuit analysis to determine the impact of misalignments on the wireless power transfer system characteristics. The theoretical analysis is verified by conducting circuit simulations at discrete points to verify the accuracy of the mathematical model.

Kavimandan, Utkarsh↗
DOE OSTI2022

Signal-Compensation-Based Adaptive PID Control for Fused Magnesia Smelting Processes

For fused magnesia smelting processes, the proportional-integral-derivative (PID) controller is difficult to regulate the smelting currents within desired ranges due to unexpected variations of the dynamics caused by material feeding operations. To solve this problem, we first proposed its dynamic model composed of a linear model and an uncertain nonlinear dynamic system that describes the unknown time-varying dynamics of nonlinearity and strong couplings among controlled variables. Then, using the accurately calculated value of the uncertain part at the previous sampling time instant and the tracking error that reflects the influence of its change rate, we developed a feedforward and a one-step optimal control to obtain two signal compensators to eliminate the impact of frequent variations of the uncertainties. For the compensators, we proposed a weight selection method to minimize the sum of the squared tracking error with ensured closed-loop stability. Based on the abovementioned modeling and control structure, we finally developed a novel adaptive PID controller augmented with signal compensators to control the whole process. Industrial applications have shown that the proposed method can always keep the tracking error and the control input within their targeted ranges, leading to a significantly reduced energy consumption per ton and increased fused magnesia production.

Wang, Weizhou↗
DOE OSTI2022

Third-Order Resonance Compensation at the FNAL Recycler Ring

The Recycler Ring (RR) at the Fermilab Accelerator Complex performs slip-stacking on 8 GeV protons, doubling the beam intensity delivered to the Main Injector (MI). At MI, the beam is accelerated to 120 GeV and delivered to the high energy neutrino experiments. Femilab’s Proton Improvement Plan II (PIP-II) will require the Recycler to store 50% more beam. Simulations have shown that the space charge tune shift at this new intensity will lead to the excitation of multiple resonance lines. Specifically, this study looks at normal sextupole lines 3 Q_{x}=76 and Q_{x}+2Q_{y}=74, plus skew sextupole lines 3 Q_{y}=73 and 2 Q_{x}+Q_{y}=75. Dedicated normal and skew sextupoles have been installed in order to compensate for these resonance lines. By measuring and calculating the Resonance Driving Terms (RDT), this study shows how each of the resonance lines can be compensated independently. Furthermore, this study shows and discusses initial investigations into compensating multiple lines simultaneously.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Group-V acceptor ionization energies and compensation centers in CdTe revisited

Group-V acceptor ionization energies and compensation centers in CdTe revisited: Spin-orbit coupling is crucial to describe the band structure of CdTe and the properties of group-V acceptors in CdTe; explains the difference between present work and previous calc. P, As, and Sb are shallow acceptors in CdTe, with the ionization energies ~100 meV, in agreement with recent Hall measurements in bulk crystals AX center is not the dominant compensation center in p-type CdTe; unstable in the case of As and P, barely stable in the case of Sb doping Intrinsic defects, such as VTe, are potentially important compensation centers Cdi is unstable with low migration barrier

14 SOLAR ENERGY↗
DOE OSTI2024

Compensating for Sintering Distortion in Additively Manufactured Shaped Charge Liners using Physics-Informed Machine Learning

Copper is a challenging material to process using laser-based additive manufacturing due to its high reflectivity and high thermal conductivity. Sintering-based processes can produce solid copper parts without the processing challenges and defects associated with laser melting; however, sintering can also cause distortion in copper parts, especially those with thin walls. In this study, we use physics-informed Gaussian process regression to predict and compensate for sintering distortion in thin-walled copper parts produced using a Markforged Metal X bound powder extrusion (BPE) additive manufacturing system. Through experimental characterization and computational simulation of copper’s viscoelastic sintering behavior, we can predict sintering deformation. We can then manufacture, simulate, and test parts with various compensation scaling factors to inform Gaussian process regression and predict a compensated as-printed (pre-sintered) part geometry that produces the desired final (post-sintered) part.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Criticality Experiments to Reduce Compensating Errors in Plutonium Nuclear Data

Compensating errors between nuclear data observables in a library can adversely impact application simulations. The primary goal of the EUCLID project (Experiments Underpinned by Computational Learning for Improvements in Nuclear Data) is to reduce compensating errors in nuclear data. A new criticality experiment, described in this work, was designed with the specific target nuclear data of 239 Pu fission, inelastic scattering, elastic scattering, capture, nu-bar, and prompt fission neutron spectrum (PFNS). This work will focus on the design and execution of the EUCLID experiment, performed on the Planet vertical lift critical assembly machine at the National Criticality Experiments Research Center (NCERC). The criticality experiment includes two different configurations with very different geometries: one is cube-like to minimize neutron leakage while the other is slab-like to maximize leakage. Having these two widely varying configurations allows the scattering sensitivities of 239 Pu to the neutron multiplication factor to be greatly changed while minimally impacting the other cross section sensitivities. Both configurations utilize the Pu ZPPR (Zero Power Physics Reactor) plates as fuel. The experiments were designed using a D-Optimality criteria, which is an optimization method minimizing the log-determinant of the adjusted nuclear data covariance for the target reactions. These experiments include not only inference of k eff , as done in all critical benchmark experiments, but several other responses as well, such as neutron multiplication measurements and reaction rate ratios. After analysis of the measured data is complete, adjustment of nuclear data will be performed to assess whether the new experimental data successfully reduced compensating errors.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

A signal compensation based cascaded PI control for an industrial heat exchange system

Since the characteristics of the industrial heat exchange system (HES) are drastically affected by variations of the steam pressure, ambient temperature and water quality, it is difficult for the classical cascade PI control system to meet the desirable control objectives. Therefore, in this paper, a deterministic linear model with unmodeled dynamics is used to describe the dynamic characteristics of the HES. It should be noted that the unmodeled dynamics at the previously sampled instant can be calculated using actual measurements and that the tracking error, which includes effects of the rate of changes of unmodeled dynamics on the controlled model, can be accurately determined. An additional compensating signal is obtained with the feedforward control together with a one-step optimal control law. Consequently, the cascade PI control strategy with the signal compensation is established. Furthermore, the simulation and industrial application show that the proposed method can effectively improve the performance of the cascade PI control system, especially when the unmodeled dynamics is subjected to unknown variations.

42 ENGINEERING↗
DOE OSTI2025

Large non-saturating Nernst thermopower and magnetoresistance in compensated semimetal ScSb

Today, high-performance thermoelectric and thermomagnetic materials operating in the low-temperature regime, particularly below the boiling point of liquid nitrogen remain scarce. Most thermomagnetic materials reported to date exhibit a strong Nernst signal along specific crystallographic directions in their single-crystal form. However, their performance typically degrades significantly in the polycrystalline form. Here, we report an improved Nernst thermopower of ~ 128 μV/K at 30 K and 14 T in polycrystalline compensated semimetal ScSb, in comparison to that was observed in single crystal ScSb previously. The magnetic field dependence of Nernst thermopower shows a linear and non-saturating behavior up to 14 T. The maximum Nernst power factor reaches to ~ 240 x 10 -4 W m −1 K −2 and Nernst figure of merit reaches to ~ 11 x 10 -4 K −1 . Polycrystalline ScSb also shows a large non-saturating magnetoresistance of ~ 940% at 2 K and 14 T. These enhanced properties originate from better electron–hole compensation, as revealed by Hall resistivity measurements. In conclusion, the cubic symmetry and absence of anisotropy in ScSb allow its polycrystalline form to achieve similar enhanced thermomagnetic and electromagnetic performance comparable to that of the single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Effects of Absorber Near-Interface Compensation on Cd(Se,Te) Solar Cell Performance

Arsenic (As) has been shown to be an effective p-type dopant for CdTe, although high performance in As-doped devices remains difficult to achieve. Arsenic is prone to self-compensation in CdTe, as evidenced by the accumulation of dopant atoms in CdTe/Cd(Se,Te) near the interface with MgxZn1-xO (MZO). In this study, we use SCAPS 1D modeling software to investigate the effect of near-interface compensation, helping elucidate loss pathways in present-day As-doped devices and informing future growth directions. We consider three possible results of As accumulation: shallow donors, deep recombination centers, and a thin layer of excess acceptor accumulation. The reduction in near-interface carrier concentration caused by shallow donors is shown to improve open-circuit voltages (VOC), whereas deep levels are detrimental to all performance parameters. The thin charge layer affects capacitance-voltage (CV) measurements by reducing the depletion width while maintaining the same carrier concentration, replicating CV behavior that has been observed in actual devices. These results illustrate the importance of monitoring dopant accumulation within 100 nm of the interface, and suggest that reducing or eliminating the As concentration in this region would be beneficial. An undoped Cd(Se,Te) layer at the interface is suggested as a possible device structure to boost performance.

absorber↗
DOE OSTI2022

Effect of Near-Interface Compensation of CdSeTe Absorber Layers on Solar Cell Performance

Arsenic has been shown to be an effective p-type dopant of CdTe. However, challenges remain in the fabrication of high efficiency CdTe solar cells using As. As-doped CdTe is prone to self-compensation and observed accumulation of dopant atoms in CdTe near the interface with MgZnO (MZO) suggests that this could be occurring. In this study, we use SCAPS 1-D modeling software to investigate the effect of near-interface compensation. We consider three cases: shallow donors, deep recombination centers, and a thin layer of excess positive charge accumulation. All of these cases are shown to have significant effects on the current-voltage characteristics, while the thin charge layer also affects capacitance-voltage measurements.

arsenic↗
DOE OSTI2023

Analysis and Compensation of Tx and Rx IQ Imbalances in Uplink IM-OFDMA Systems

Index modulation-based orthogonal division multiple access (IM-OFDMA) has recently been proposed as a potential technique for future wireless communication systems due to its superior spectral efficiency and error performance over conventional multiple access schemes. However, its performance is still under investigation by researchers in light of a variety of scenarios and assumptions. Following this direction, in this Article, the individual and joint effects of the transmitter (Tx) and receiver (Rx) in-phase and quadrature imbalances (IQI) on the bit-error-rate (BER) performance of the uplink IM-OFDMA scheme are investigated by considering whether each user's RF front-end is identical or not. Moreover, to reduce the detrimental effect of IQI, a preamble-based estimation and compensation method is proposed for IM-OFDMA. Closed-form expressions for the average BER of IM-OFDMA are obtained by considering the physical effect of the Tx and Rx IQI. Also, using Monte Carlo simulations, the derived expressions are verified under different system configurations. Furthermore, analytical and simulation results reveal that Tx and Rx IQI cause an error floor in the BER performance of IM-OFDMA schemes. However, the proposed estimation and compensation method not only reduces the impact of IQI but also leads to a better BER performance compared to the case of no IQI, which mainly refers to the frequency diversity caused by the IQI.

42 ENGINEERING↗
DOE OSTI2022

Time Delay of Wide Area Damping Control in Urban Power Grid: Model-Based Analysis and Data-Driven Compensation

Due to the rapid development of economies, large urban cities consume an increasing amount of energy and have a higher requirement for power quality. Voltage source converter based high voltage direct current (VSC-HVDC) is a promising device to transmit clean power from remote regions to urban power systems, while also providing wide area damping control (WADC) for frequency stabilization. However, the time-delay naturally existing in the VSC-HVDC system may degrade the performance of WADC and even result in instability. To address this issue, this paper develops a time-delay correction control strategy for VSC-HVDC damping control in urban power grids. First, a small signal model of WADC is built to analyze the negative impacts of time delay. Then, a data-driven approach is proposed to compensate for the inherent time delay in VSC-HVDC damping control. The extensive training data will be generated under various disturbances. After offline training, the long short-term memory network (LSTM) can be implemented online to predict the actual frequency deviation based on real-time measurements. Finally, the proposed method is validated through MATLAB-Simulink in a two-area four-machine system. The results indicate that the data-driven compensation has a strong generalization ability for random delay time constants and can improve the performance of WADC significantly.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Dynamic Performance Enhancement for Nonlinear Stochastic Systems Using RBF Driven Nonlinear Compensation with Extended Kalman Filter

In this paper, a novel hybrid control method is proposed to enhance the control performance of the PI based control system for a class of nonlinear and non-Gaussian stochastic dynamic processes with unmeasurable states. Firstly, to enhance the tracking performance of the PI controller where the PI parameters are fixed in many actual control systems, the compensative signal is formed using the extended Kalman filter(EKF) based state estimator and driven by the radial basis function (RBF) neural network based compensator. In addition, the weights of RBF is trained to minimize the entropy criterion of tracking error as the process is subjected to non-Gaussian disturbances. Meanwhile, since the precise statistical property of noises is hard to obtain for many industrial processes, the kernel density estimation (KDE) technique is employed in this paper to estimate the entropy. The convergence of RBF network is discussed and the stability of the resulted closed-loop hybrid control system is analyzed in mean square sense. Finally, a numerical example and a practical system testing are given to illustrate the effectiveness of the proposed control method.

stochastic systems, PI Controller, Entropy, Extend↗
DOE OSTI2026

Topological magneto-optical Kerr effect without spin-orbit coupling in spin-compensated antiferromagnet

The magneto-optical Kerr effect (MOKE), the differential reflection of oppositely circularly polarized light, has traditionally been associated with relativistic spin-orbit coupling (SOC), which links a particle’s spin with its orbital motion. In ferromagnets, large MOKE signals arise from the combination of magnetization and SOC, while in certain coplanar antiferromagnets, SOC-induced Berry curvature enables MOKE despite zero net magnetization. Theoretically, large MOKE can also arise in a broader class of magnetic materials with compensated spins, without relying on SOC - for example, in systems exhibiting real-space scalar spin chirality. The experimental verification has remained elusive. Here, we demonstrate such a SOC- and magnetization-free MOKE in the noncoplanar antiferromagnet Co 1/3 TaS 2 . Using a Sagnac interferometer microscope, we image domains of scalar spin chirality and their reversal. Our findings establish experimentally a new mechanism for generating large MOKE signals and position chiral spin textures in compensated magnets as a compelling platform for ultrafast, stray-field-immune opto-spintronic applications.

Magnetic properties and materials↗
DOE OSTI2020

Distinctive exchange bias and unusual memory effects in magnetically compensated Pr 0.75 Gd 0.25 ScGe

Tuning the chemistry of materials often leads to discoveries of interesting phenomena that expand basic science and support practical applications. Here we show how different spin–orbit coupling in light and heavy lanthanides can be exploited to create complex magnetic ground states and thereby unusual spontaneous exchange bias (SEB), conventional exchange bias (CEB), and magnetic memory effects in almost ideally magnetically compensated Pr 0.75 Gd 0.25 ScGe, which is a representative of the PrScGe–GdScGe solid solution. We report the synthesis and detailed characterization of Pr 0.75 Gd 0.25 ScGe by X-ray powder diffraction, scanning electron microscopy, and magnetization measurements in magnetic fields up to 140 kOe. Partial substitution of a light lanthanide, Pr, with a heavy lanthanide, Gd, results in a complex magnetic ground state, which includes large spontaneous and conventional exchange biases reaching magnitudes of ~1.7 kOe and ~3.5 kOe, respectively, at T = 2 K, as well as shape dependent magnetic compensation and bias phenomena occurring in small external fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Molecularly engineered Li compensation agent-integrated separator enabling regeneration of degraded LiFePO 4

Lithium replenishment separators (LRSs) integrating pre-lithiation agents can regenerate degraded lithium cathodes via facile reassembly with a fresh anode and the LRS. A persistent challenge is the formation of gas or solid residues during pre-lithiation. To address this, for the first time, we develop an LRS based on a molecularly engineered dilithium salt of tetrafluorohydroquinone, which compensates for lithium loss while generating decomposition products that dissolve in the electrolyte as a favorable additive, without forming gas or solid residues, thus offering a green route for lithium compensation. A pristine LiFePO 4 ‖graphite full cell with the LRS exhibits 9.3% higher overall capacity than a polypropylene separator (PPS) cell after 50 cycles at 0.5C, and the degraded LiFePO 4 ‖graphite full cell incorporating this LRS achieves a 44.9% higher capacity than the PPS-based cell after 200 cycles at 0.5C. Our LRS demonstrates strong potential for high-performance lithium-ion batteries and spent battery regeneration.

Tao, Fujun [Worcester Polytechnic Institute, MA (U↗
DOE OSTI2022

External charge compensation in etched gallium nitride measured by x-ray photoelectron spectroscopy

Electronic states at GaN surfaces and at regrowth and heteroepitaxy interfaces inhibit electronic device performance. Understanding electronic state configuration at the GaN surface is, therefore, crucial for the development of GaN-based devices, which are currently of considerable interest in power electronic applications. GaN and other wurtzite III-nitrides possess large spontaneous polarization along the c-axis, producing a bound sheet charge at the surface, which affects the electronic state configuration through the formation of internal and external compensation charges. Defects induced by conventional plasma-based dry etching methods may inhibit the internal screening of this bound charge and thus increase the concentration of external charged states. The surface band bending of n-type Ga-face GaN (0001) was measured with x-ray photoelectron spectroscopy after inductively coupled plasma etching to investigate the impact of dry etching on external charge compensation. GaN samples were etched using inductively coupled plasma with varying rf power and a novel plasma-enhanced atomic layer etching method using an oxidation, fluorination, and ligand-exchange mechanism. The band bending varied from 0.0 to 0.8 ± 0.1 eV for the samples measured.

Hatch, Kevin A. (ORCID:0000000283118623)↗