Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide heterostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

On the Development of Order and Interfaces during the Growth of Ultrathin La 2 CuO 4 Films by Molecular Beam Epitaxy

While the atomic structure of interfaces in complex oxide heterostructures created by epitaxial growth has been investigated extensively, few studies have been conducted on how interfaces form and restructure at the initial stage of film growth. The dynamic aspects of the growth behavior can strongly influence the final interfacial atomic structure, which may lead to the emergence of interface-specific properties, such as the rise of interfacial superconductivity between certain Ruddlesden-Popper oxide materials. In this report, the structural development of La2CuO 4 thin films grown by molecular beam epitaxy on a LaSrAlO 4 substrate is investigated by X-ray diffraction measurements with rapid scans over a volume of reciprocal space. This method provides far more detailed information on interface formation than traditional fixed-point measurements. The results show that the atomic structure of the interface becomes fully established after just a single unit cell of growth. Interestingly, restructuring continues to occur within the topmost half to one unit cell of the film during the deposition process. However, diffraction intensity oscillations from both reflection high-energy electron and X-ray measurements stabilize only after the growth of two unit cells, indicating that the growth front morphology continues to evolve until the start of the third unit cell. This multimodal investigation provides insights into the atomic processes taking place during layered oxide interface formation, including the dynamical rearrangement of LaO and CuO 2 layers. Such information is not only relevant to the engineering and optimization of functional layer structures but can also be critical for ultrathin films.

36 MATERIALS SCIENCE↗

Spatially resolved ultrafast magnetic dynamics initiated at a complex oxide heterointerface

Static strain in complex oxide heterostructures 1,2 has been extensively used to engineer electronic and magnetic properties at equilibrium 3 . In the same spirit, deformations of the crystal lattice with light may be used to achieve functional control across heterointerfaces dynamically 4 . Here, by exciting large-amplitude infrared-active vibrations in a LaAlO 3 substrate we induce magnetic order melting in a NdNiO 3 film across a heterointerface. Femtosecond resonant soft X-ray diffraction is used to determine the spatiotemporal evolution of the magnetic disordering. We observe a magnetic melt front that propagates from the substrate interface into the film, at a speed that suggests electronically driven motion. Lastly, light control and ultrafast phase front propagation at heterointerfaces may lead to new opportunities in optomagnetism, for example by driving domain wall motion to transport information across suitably designed devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Subband structure of two-dimensional electron gases in SrTiO{sub 3}

Tunneling between two parallel, two-dimensional electron gases (2DEGs) in a complex oxide heterostructure containing a large, mobile electron density of ∼3 × 10{sup 14} cm{sup −2} is used to probe the subband structure of the 2DEGs. Temperature-dependent current-voltage measurements are performed on SrTiO{sub 3}/GdTiO{sub 3}/SrTiO{sub 3} junctions, where GdTiO{sub 3} serves as the tunnel barrier, and each interface contains a high-density 2DEG. Resonant tunneling features in the conductance and its derivative occur when subbands on either side of the barrier align in energy as the applied bias is changed, and are used to analyze subband energy spacings in the two 2DEGs. We show that the results agree substantially with recent theoretical predictions for such interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of topotactic fluorination methods for complex oxide films

We have investigated the synthesis of SrFeO{sub 3−α}F{sub γ} (α and γ ≤ 1) perovskite films using topotactic fluorination reactions utilizing poly(vinylidene fluoride) as a fluorine source. Two different fluorination methods, a spin-coating and a vapor transport approach, were performed on as-grown SrFeO{sub 2.5} films. We highlight differences in the structural, compositional, and optical properties of the oxyfluoride films obtained via the two methods, providing insight into how fluorination reactions can be used to modify electronic and optical behavior in complex oxide heterostructures.

36 MATERIALS SCIENCE↗

LaAlO{sub 3} thickness window for electronically controlled magnetism at LaAlO{sub 3}/SrTiO{sub 3} heterointerfaces

Complex-oxide heterostructures exhibit rich physical behavior such as emergent conductivity, superconductivity, and magnetism that are intriguing for scientific reasons as well as for potential technological applications. It was recently discovered that in-plane magnetism at the LaAlO{sub 3}/SrTiO{sub 3} (LAO/STO) interface can be electronically controlled at room temperature. Here, we employ magnetic force microscopy to investigate electronically controlled ferromagnetism at the LAO/STO interface with LAO thickness t varied from 4 unit cell (u.c.) to 40 u.c. Magnetic signatures are observed only within a thickness window 8 u.c. ≤ t ≤ 25 u.c. Within this window, the device capacitance corresponds well to the expected geometric value, while for thicknesses outside this window, the capacitance is strongly suppressed. The ability to modulate electronic and magnetic properties of LAO/STO devices depends on the ability to control carrier density, which is in turn constrained by intrinsic tunneling mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced metallic properties of SrRuO 3 thin films via kinetically controlled pulsed laser epitaxy

Metal electrodes are a universal element of all electronic devices. Conducting SrRuO 3 (SRO) epitaxial thin films have been extensively used as electrodes in complex-oxide heterostructures due to good lattice mismatches with perovskite substrates. However, when compared to SRO single crystals, SRO thin films have shown reduced conductivity and Curie temperatures (T C ), which can lead to higher Joule heating and energy loss in the devices. In this paper, we report that high-quality SRO thin films can be synthesized by controlling the plume dynamics and growth rate of pulsed laser epitaxy (PLE) with real-time optical spectroscopic monitoring. The SRO thin films grown under the kinetically controlled conditions, down to ca. 16 nm in thickness, exhibit both enhanced conductivity and T C as compared to bulk values, due to their improved stoichiometry and a strain-mediated increase of the bandwidth of Ru 4d electrons. Finally, this result provides a direction for enhancing the physical properties of PLE-grown thin films and paves a way to improved device applications.

36 MATERIALS SCIENCE↗

Néel vector reorientation in ferromagnetic/antiferromagnetic complex oxide nanostructures

In this study, we report on a temperature-driven antiferromagnetic (AF) spin reorientation transition in micro- and nanostructures of AF/ferromagnetic (FM) LaFeO 3 /La 0.7 Sr 0.3 MnO 3 thin film bilayers. Using a combination of x-ray photoemission electron microscopy and x-ray absorption spectroscopy, the Néel vector is shown to reorient 90° as a result of the competition between a shape-imposed anisotropy in the AF layer and interface coupling to the adjacent FM layer. We demonstrate how a temperature dependence of the AF/FM spin configuration in line-shaped nanomagnets can be tuned by variation of their linewidth. This work provides insight into the AF/FM interface exchange coupling in complex oxide heterostructures and the possibilities of spin control by nanostructuring in thin film spintronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the redistribution of charge in La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 multilayer thin films

The atomic and electronic structures of La 0.7 Sr 0.3 MnO 3 (LSMO)/La 0.7 Sr 0.3 CrO 3 (LSCO) multilayer thin films are investigated using aberration corrected scanning transmission electron microscopy (STEM) imaging and spectroscopy. Atomic resolution high angle annular dark-field reveals that LSMO layers have an expanded out-of-plane lattice parameter compared to compressed LSCO layers, contrasting with x-ray diffraction measurements. The expansion is found to result from preferential oxygen vacancy formation in LSMO during STEM sample preparation as determined by electron energy-loss spectroscopy. The La/Sr atom column intensity is also found to oscillate by about 4% between the LSMO and LSCO layers, indicative of La/Sr concentration variation. Using energy-dispersive x-ray spectroscopy in combination with image simulations, we confirm the La/Sr inhomogeneity and elucidate the origin of charge redistribution within the multilayer. These results illuminate the sensitivity of the technique to subtle structural, chemical, and electronic features that can arise to compensate charge imbalances in complex oxide heterostructures.

36 MATERIALS SCIENCE↗

Broad-range tuning of ferroelectric switching of La x Bi 1−x FeO 3 epitaxial films via digital doping using off-axis co-sputtering

To investigate the scope of ferroelectric behavior in La-substituted BiFeO 3 films, La x Bi 1−x FeO 3 epitaxial films were synthesized using off-axis co-sputtering on SrTiO 3 (001) and DyScO 3 (110) substrates with a SrRuO 3 bottom electrode layer. A digital-doping deposition method was used to enable precise control and continuous tuning of La concentration in high-quality LaxBi 1−x FeO 3 films across a wide range of x = 0.05–0.60, which was systematically investigated using piezoresponse force microscopy. Robust and reversible out-of-plane ferroelectric switching has been observed up to x = 0.35, while films with x ≥ 0.37 exhibit no measurable ferroelectric behavior, indicating a sharp ferroelectric-to-paraelectric phase transition between x = 0.35 and 0.37. This represents the highest reported La concentration in LaxBi 1−x FeO 3 films that retains ferroelectric ordering, highlighting opportunities to engineer ferroelectric and multiferroic properties in complex oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray nanodiffraction studies of ionically controlled nanoscale phase separation in cobaltites

Complex oxide heterostructures provide access to emergent functional and structural phases that are not present in the bulk constituent materials. In this Rapid Communication, we focus on $La_{0.67}Sr_{0.33}CoO_3$ (LSCO)/Gd heterostructures due to the high oxygen ion conductivity, as well as the coupled magnetic and electronic properties of LSCO, which are strongly dependent on the oxygen stoichiometry. This combination of properties enables the ionic control of the functional properties of LSCO thin films through the presence of oxygen getter layers such as Gd.We utilize x-ray nanodiffraction to directly image the nanoscale morphology of LSCO thin films as they are progressively transformed from the equilibrium perovskite phase to the metastable brownmillerite (BM) phase with increasing Gd thickness. Our studies show the coexistence of perovskite and BM phases with a critical oxygen vacancy concentration threshold which leads to the formation of extended BM filaments. In addition to lateral phase separation, we observed phase separation within the film thickness possibly due to pinning of the perovskite and BM phases by the substrate/LSCO and LSCO/Gd interface, respectively. Our studies provide a nanoscale survey of the phase separation in the cobaltites and shed light on the formation of the metastable BM phase.

36 MATERIALS SCIENCE↗

Giant anisotropic magnetoresistance in oxygen-vacancy-ordered epitaxial La 0.5 Sr 0.5 CoO 3–δ films

Recent advances in complex oxide heterostructures have realized extraordinary control over oxygen vacancies ($V_\text{O}$), including strain-tuned $V_\text{O}$ order, and electric-field-controlled transformations between perovskite and $V_\text{O}$-ordered structures. Perovskite cobaltites such as La 1– x Sr x CoO 3–δ provide a prime example, recent work demonstrating that strain engineering of $V_\text{O}$ ordering induces large (~10 7 erg/cm 3 ) perpendicular magnetic anisotropy. Here we show that $V_\text{O}$-ordered epitaxial La 0.5 Sr 0.5 CoO 3–δ films exhibit not only strong magnetic anisotropy, but also a giant form of anisotropic magnetoresistance (AMR). This has magnetic field, temperature, and angular dependencies in quantitative accord with conventional AMR, but with AMR ratios up to an extraordinary 40.3%, 20 times enhanced over bulk cobaltites, and ~10–100 times larger than typical transition metals. This giant AMR has no strong dependence on heteroepitaxial strain (between –2.1% and +1.8%) or thickness, and is instead ascribed to symmetry lowering associated with $V_\text{O}$ ordering. The AMR ratios thus obtained in this work are among the largest reported in the over 160-year history of this phenomenon, despite the absence of heavy elements.

36 MATERIALS SCIENCE↗

Probing vacancy behavior across complex oxide heterointerfaces

Oxygen vacancies ( V O ● ● ) play a critical role as defects in complex oxides in establishing functionality in systems including memristors, all-oxide electronics, and electrochemical cells that comprise metal-insulator-metal or complex oxide heterostructure configurations. Improving oxide-oxide interfaces necessitates a direct, spatial understanding of vacancy distributions that define electrochemically active regions. We show vacancies deplete over micrometer-level distances in Nb-doped SrTiO 3 (Nb:SrTiO 3 ) substrates due to deposition and post-annealing processes. We convert the surface potential across a strontium titanate/yttria-stabilized zirconia (STO/YSZ) heterostructured film to spatial (<100 nm) vacancy profiles within STO using ( T = 500°C) in situ scanning probes and semiconductor analysis. Oxygen scavenging occurring during pulsed laser deposition reduces Nb:STO substantially, which partially reoxidizes in an oxygen-rich environment upon cooling. These results (i) introduce the means to spatially resolve quantitative vacancy distributions across oxide films and (ii) indicate the mechanisms by which oxide thin films enhance and then deplete vacancies within the underlying substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneous Integration of Flipped Oxide Heterostructure Membranes for Nanoelectronics

Freestanding complex oxide membranes enable the release and transfer of epitaxial films, offering new design freedoms for next‐generation electronics. While the LaAlO 3 /SrTiO 3 (LAO/STO) heterostructure exhibits remarkable tunable conductivity at its interface, the active interface remains buried beneath the substrate, limiting access to this functionality. Here, we demonstrate how the LAO/STO heterostructure, in membrane form, can be flipped and precisely positioned on silicon and other platforms using polymer‐free micromanipulation. The transferred membranes preserve atomically smooth surfaces, high crystallinity, and key electronic properties. Through the 44‐nm insulating STO layer, ultra‐low‐voltage electron‐beam lithography (ULV‐EBL) writes conductive nanostructures at the now‐accessible STO/LAO interface, offering the potential to function as programmable local gates that modulate charge carriers in the underlying silicon. The platform establishes a general strategy for integrating complex oxide heterostructures with semiconductors, quantum materials, and flexible substrates, enabling new architectures for reprogrammable nanoelectronic devices.

36 MATERIALS SCIENCE↗

Magnetism of Complex Oxide Interfaces

This chapter reviews theoretical studies focused on interfaces or heterostructures of complex oxides such as perovskite transition-metal oxides (TMO). It describes examples of such theoretical studies of TMO interfaces employing a variety of methods. The chapter explains theoretical work at the interfaces of a ferroelectric and a magnetic manganite and provides rules to judge the type of coupling between the spins at opposite sides of the interfaces. It shows how the electric field of the ferroelectric component affects the electronic density of the other component, typically a metallic manganite, thus altering its transport properties and sometimes even inducing a phase transition. The chapter explores the puzzling exchange bias effect is addressed for the interfaces involving a ferromagnet on one side and a G-type antiferromagnetic state on the other. If the interfacial carrier density is modulated away from the region, the ferromagnetism and transport will become worse.

Okamoto, Satoshi↗

Octahedral rotations in strained LaAlO{sub 3}/SrTiO{sub 3} (001) heterostructures

Many complex oxides display an array of structural instabilities often tied to altered electronic behavior. For oxide heterostructures, several different interfacial effects can dramatically change the nature of these instabilities. Here, we investigate LaAlO{sub 3}/SrTiO{sub 3} (001) heterostructures using synchrotron x-ray scattering. We find that when cooling from high temperature, LaAlO{sub 3} transforms from the Pm3{sup ¯}m to the Imma phase due to strain. Furthermore, the first 4 unit cells of the film adjacent to the substrate exhibit a gradient in rotation angle that can couple with polar displacements in films thinner than that necessary for 2D electron gas formation.

36 MATERIALS SCIENCE↗

Metal-organic pulsed laser deposition for stoichiometric complex oxide thin films

Methods and systems for forming complex oxide films are provided. Also provided are complex oxide films and heterostructures made using the methods and electronic devices incorporating the complex oxide films and heterostructures. In the methods pulsed laser deposition is conducted in an atmosphere containing a metal-organic precursor to form highly stoichiometric complex oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal-organic pulsed laser deposition for stoichiometric complex oxide thin films

Methods and systems for forming complex oxide films are provided. Also provided are complex oxide films and heterostructures made using the methods and electronic devices incorporating the complex oxide films and heterostructures. In the methods pulsed laser deposition is conducted in an atmosphere containing a metal-organic precursor to form highly stoichiometric complex oxides.

Eom, Chang-Beom↗